Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Biology
  3. ›1 Chemistry of Life
  4. ›1.1 Structure of water and hydrogen bonding

AP Biology · Unit 1 · Chemistry of Life

1.1 Structure of water and hydrogen bonding

Describe water’s polarity and explain how hydrogen bonds give water cohesion and high heat capacity.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Water’s bent shape makes the molecule polar
  1. 1Water’s bent shape makes the molecule polar
  2. 2Opposite partial charges attract neighboring water molecules
  3. 3Hydrogen bonds give water strong cohesion
  4. 4Hydrogen bonding helps water resist temperature change
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Water’s bent shape makes the molecule polar

A water molecule contains one oxygen atom joined to two hydrogen atoms by covalent bonds. Oxygen attracts the shared electrons more strongly than hydrogen does. This gives oxygen a partial negative charge and each hydrogen a partial positive charge. These are partial charges, not the full charges of ions.

The molecule has a bent shape, so its bond polarities do not cancel. Water is therefore a polar molecule: its charge is unevenly distributed. This uneven charge lets neighboring water molecules attract one another. The diagram shows the bond angle and where the partial charges occur.

Figure 1. The bent shape separates partial charges. Attraction between opposite partial charges links neighboring molecules.

Key terms · tap one for its definition

covalent bonds

Covalent bonds join atoms through shared pairs of electrons.

bent shape

Water’s bent shape places its two hydrogen atoms at an angle around the oxygen atom.

polar molecule

A polar molecule has an uneven distribution of charge across the molecule.

Part 1 done

2

Part 2 of 4: Opposite partial charges attract neighboring water molecules

The partially positive hydrogen of one water molecule attracts the partially negative oxygen of another. This attraction is a hydrogen bond. Each water molecule can form hydrogen bonds with several neighbors. Individual hydrogen bonds are weaker than the covalent bonds within a water molecule.

In liquid water, molecules move constantly. Hydrogen bonds break and form again as their positions change. The hydrogen-bond network is therefore changing, rather than fixed. Many bonds act together at any moment, giving water properties that a single molecule cannot show. A hydrogen bond links neighboring molecules; it does not replace either molecule’s covalent bonds.

Common mistake

A hydrogen bond does not join oxygen and hydrogen within one water molecule. That bond is covalent.

Key terms · tap one for its definition

hydrogen bond

A hydrogen bond is an attraction between a partially positive hydrogen and a partially negative atom on another molecule.

hydrogen-bond network

A hydrogen-bond network is the changing set of hydrogen bonds linking neighboring water molecules.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the feature that makes water a polar molecule.
Show answer and explanation

Answer: D · Worked explanation

Water is polar because oxygen attracts the shared electrons more strongly than hydrogen, and the molecule's bent shape means the bond polarities do not cancel. The atoms carry partial charges, not full ionic charges. The option assigning stronger electron attraction to hydrogen reverses which atom attracts the shared electrons more strongly.
3

Part 3 of 4: Hydrogen bonds give water strong cohesion

Cohesion is the attraction between molecules of the same substance. Water molecules cohere because hydrogen bonds attract neighboring molecules. At a water surface, this attraction helps produce surface tension. The surface resists being stretched, allowing some small organisms to remain on top of it.

Cohesion also helps water remain in a continuous column inside a plant’s water-conducting tubes. When water evaporates from leaves, the resulting pull can draw the column upward. Adhesion, the attraction between different substances, helps water cling to the tube walls. Cohesion holds water molecules together; adhesion links water to another surface. Both can contribute to water movement through narrow spaces.

Key terms · tap one for its definition

cohesion

Cohesion is the attraction between molecules of the same substance.

surface tension

Surface tension is the resistance of a liquid surface to being stretched.

adhesion

Adhesion is the attraction between molecules of different substances.

Part 3 done

4

Part 4 of 4: Hydrogen bonding helps water resist temperature change

Water has a high specific heat capacity. Raising the temperature of a given amount of water takes substantial energy. Some added energy disrupts hydrogen bonds before molecular motion increases much. Temperature reflects average molecular motion, so water warms more slowly than many substances under similar conditions.

As water cools, hydrogen bonds form and energy is released. This resistance to rapid temperature change helps stabilize temperatures in aquatic habitats and within organisms. It does not mean water cannot warm or cool. Water also has a high heat of vaporization because molecules need energy to escape into the gas phase. Evaporation removes energetic molecules and can cool a surface.

Exam tip

Link the property to the bonds. Name the energy transfer and explain its effect on temperature.

Key terms · tap one for its definition

high specific heat capacity

High specific heat capacity means substantial energy is needed to raise the temperature of a given amount of substance.

high heat of vaporization

High heat of vaporization means substantial energy is needed to turn a given amount of liquid into gas.

Note read

Check your recall[12 marks]

4 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe the atoms and shape of a water molecule.

    Show mark schemeHide mark scheme

    Model answer

    A water molecule has one oxygen covalently bonded to two hydrogen atoms. The molecule is bent.

    • 1 mark for identifying one oxygen atom and two hydrogen atoms joined by covalent bonds
    • 1 mark for stating that the molecule has a bent shape
  2. 2.Explain[4 marks]

    Explain why water is polar and how a hydrogen bond forms between water molecules.

    Show mark schemeHide mark scheme

    Model answer

    Oxygen attracts shared electrons more strongly than hydrogen. Oxygen becomes partially negative, while each hydrogen becomes partially positive. The bent shape prevents the bond polarities from canceling. A hydrogen bond forms when a hydrogen on one molecule attracts an oxygen on another.

    • 1 mark for stating that oxygen attracts the shared electrons more strongly
    • 1 mark for identifying oxygen as partially negative and hydrogen as partially positive
    • 1 mark for explaining that the bent shape prevents bond polarities from canceling
    • 1 mark for describing attraction between hydrogen on one molecule and oxygen on another
  3. 3.Explain[3 marks]

    Explain how hydrogen bonding supports cohesion and water movement in plants.

    Show mark schemeHide mark scheme

    Model answer

    Hydrogen bonds attract neighboring water molecules, producing cohesion. Cohesion helps maintain a continuous water column in water-conducting tubes. Evaporation from leaves can pull that column upward.

    • 1 mark for linking hydrogen bonds between water molecules to cohesion
    • 1 mark for stating that cohesion helps maintain a continuous water column
    • 1 mark for explaining that evaporation from leaves can pull the column upward
  4. 4.Explain[3 marks]

    Explain how hydrogen bonds contribute to water’s high specific heat capacity.

    Show mark schemeHide mark scheme

    Model answer

    Some added energy disrupts hydrogen bonds before molecular motion increases much. As a result, water’s temperature rises slowly. This helps stabilize temperatures in organisms and aquatic habitats.

    • 1 mark for stating that some added energy disrupts hydrogen bonds
    • 1 mark for linking this energy use to a slower temperature rise
    • 1 mark for identifying temperature stability in organisms or aquatic habitats

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify the interaction that links neighboring water molecules in liquid water.
Show answer and explanation

Answer: B · Worked explanation

A hydrogen bond is the attraction between a partially positive hydrogen on one water molecule and a partially negative atom, such as oxygen, on another. It links neighboring molecules without replacing their covalent bonds. The covalent-bond option is tempting because water contains covalent bonds, but those bonds join atoms within each molecule.
3.

Easy·State[1 mark]

State what cohesion means when describing liquid water.
Show answer and explanation

Answer: A · Worked explanation

Cohesion is attraction between molecules of the same substance, so water molecules attracting other water molecules show cohesion. Attraction between water and tube walls is adhesion, not cohesion. Surface tension is a surface effect supported by cohesion, while energy needed for vaporization describes a different property.
4.

Easy·Identify[1 mark]

Identify the water property that describes the substantial energy needed to raise the temperature of a given amount of water.
Show answer and explanation

Answer: D · Worked explanation

High specific heat capacity means that substantial energy is needed to raise the temperature of a given amount of water. High heat of vaporization also involves substantial energy, but it concerns turning liquid water into gas rather than raising its temperature. Surface tension and adhesion describe attractions, not this energy-temperature relationship.
5.

Medium·Deduce[2 marks]

A molecule has two polar covalent bonds, but its overall charge distribution is uneven because the bonds point in directions that do not cancel. Deduce which description best fits the molecule.
Show answer and explanation

Answer: A · Worked explanation

When polar bonds point in directions that do not cancel, the molecule has an uneven charge distribution and is polar. Water has this arrangement because it is bent. The claim that polar bonds always cancel in pairs is incorrect: whether they cancel depends on the molecule's shape, not simply the number of bonds.
6.

Medium·Determine[2 marks]

In a sample of liquid water, molecules continually change position while attractions between neighboring molecules form and break. Determine the best description of the hydrogen-bond network.
Show answer and explanation

Answer: D · Worked explanation

In liquid water, molecules move, so hydrogen bonds continually form and break as neighboring positions change. The network is therefore changing rather than fixed. The fixed-structure option confuses a liquid with a rigid arrangement, while molecular motion does not eliminate hydrogen bonding.
7.

Medium·Explain[2 marks]

A small insect can remain on the surface of a pond without sinking. Explain which property most directly helps the surface resist being stretched.
Show answer and explanation

Answer: D · Worked explanation

Cohesion between water molecules helps produce surface tension, which is the surface's resistance to being stretched and can support small organisms. Adhesion describes attraction between different substances, not the attraction holding water molecules together. Heat capacity and heat of vaporization concern energy transfer rather than the surface's resistance to stretching.
8.

Medium·Calculate[2 marks]

A sample of water absorbs 240 J240\,\text{J}240J of energy, and 150 J150\,\text{J}150J is used to disrupt hydrogen bonds before molecular motion increases substantially. How much energy remains to increase molecular motion?
Show answer and explanation

Answer: C · Worked explanation

Subtract the energy used to disrupt hydrogen bonds from the total absorbed: 240 J−150 J=90 J240\,\text{J} - 150\,\text{J} = 90\,\text{J}240J−150J=90J. Thus 90 J90\,\text{J}90J remains to increase molecular motion. The tempting choice of 150 J150\,\text{J}150J is the portion used to disrupt bonds, not the remaining portion.
9.

Medium·Compare[2 marks]

Water molecules are attracted to one another inside a narrow tube, and they are also attracted to the tube's wall. Compare these two attractions.
Show answer and explanation

Answer: D · Worked explanation

Attraction between water molecules is cohesion because the molecules are the same substance; attraction between water and the tube wall is adhesion because they are different substances. Both interactions can contribute to water movement through narrow spaces. Calling both cohesion overlooks the difference between attraction within one substance and attraction between different substances.
10.

Hard·Deduce[2 marks]

Two equal amounts of liquid absorb the same energy. One warms less than the other, and the difference is attributed to energy disrupting attractions between its molecules before molecular motion increases substantially. Deduce the best explanation for the slower warming.
Show answer and explanation

Answer: C · Worked explanation

In water, some added energy disrupts hydrogen bonds before molecular motion increases substantially, so temperature rises more slowly. The option saying more energy is available for molecular motion predicts faster, not slower, warming. High heat of vaporization concerns energy for escape into the gas phase; it is not the direct explanation for this temperature change.

Keep going

Next topic1.2 Elements of life

More in Unit 1 · Chemistry of Life

  1. 1.1Structure of water and hydrogen bondingNotes · 10 questions
  2. 1.2Elements of lifeNotes · 10 questions
  3. 1.3Introduction to macromoleculesNotes · 10 questions
  4. 1.4CarbohydratesNotes · 10 questions
  5. 1.5LipidsNotes · 10 questions
  6. 1.6Nucleic acidsNotes · 10 questions
  7. 1.7ProteinsNotes · 10 questions

All AP Biology topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Water’s bent shape makes the molecule polar
  2. 2Opposite partial charges attract neighboring water molecules
  3. 3Hydrogen bonds give water strong cohesion
  4. 4Hydrogen bonding helps water resist temperature change
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe