Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Biology
  3. ›4 Cell Communication and Cell Cycle
  4. ›4.3 Signal transduction pathways

AP Biology · Unit 4 · Cell Communication and Cell Cycle

4.3 Signal transduction pathways

Explain how cells relay and amplify signals, and how pathway changes can alter cell function or cause disease.

  • 4 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Protein interactions relay signals through the cell
  1. 1Protein interactions relay signals through the cell
  2. 2Second messengers spread and amplify signals inside cells
  3. 3Pathway changes alter the strength and duration of responses
  4. 4Mutations can make signaling pathways cause disease
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Protein interactions relay signals through the cell

A signal received at the cell surface must reach targets inside the cell. In a signal transduction pathway, each activated component changes the activity of another component. This sequence relays information without moving the original signaling molecule through the cell.

A common relay involves a protein kinase, which transfers a phosphate group from ATP to a target protein. This change can activate or inhibit the target. Several kinases may act in sequence, forming a phosphorylation cascade. Phosphatases remove phosphate groups and can help end the signal. The pathway's final targets may change enzyme activity or gene expression.

Figure 1. Successive proteins relay the signal. One active component can act on several downstream molecules.

Key terms · tap one for its definition

signal transduction pathway

A signal transduction pathway is a sequence of molecular interactions that carries a received signal to targets inside a cell.

protein kinase

A protein kinase transfers a phosphate group from ATP to a protein, changing that protein's activity.

phosphorylation cascade

A phosphorylation cascade is a sequence in which activated kinases phosphorylate proteins farther along a signaling pathway.

Part 1 done

2

Part 2 of 4: Second messengers spread and amplify signals inside cells

Some activated receptors trigger production or release of second messengers. These small molecules or ions carry the signal to proteins inside the cell. Cyclic AMP, or cAMP, is made from ATP by an enzyme activated during some signaling pathways. It can activate a protein kinase, which then acts on other targets.

Calcium ions are another common second messenger. A signal can open channels that release calcium from internal stores into the cytoplasm. Calcium then binds proteins and changes their activity. Signals are amplified when one activated component produces many second messenger molecules, or when one active enzyme modifies many targets. A small initial signal can therefore cause a large response.

Common mistake

Second messengers are not the original signals outside the cell. They carry information within the cell after a signal is received.

Key terms · tap one for its definition

second messengers

Second messengers are small molecules or ions that relay a received signal to targets inside a cell.

cAMP

Cyclic AMP is a second messenger made from ATP that activates proteins in certain signaling pathways.

calcium ions

Calcium ions can act as second messengers when a signal raises their concentration in the cytoplasm.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the event that commonly relays a signal from an activated cell-surface receptor to downstream proteins in a phosphorylation cascade.
Show answer and explanation

Answer: A · Worked explanation

A protein kinase relays a signal by transferring a phosphate group to a target protein, which can alter that protein's activity and pass the signal onward. Phosphatases generally remove phosphate groups rather than add them, so the option describing a phosphatase adding phosphate reverses its usual role.
3

Part 3 of 4: Pathway changes alter the strength and duration of responses

A cell's response depends on which pathway components are active and for how long. Changing the amount or activity of a receptor can change how strongly a cell responds to the same external signal. A change farther along the pathway can also alter the response, even when the receptor works normally.

For example, an enzyme that breaks down cAMP helps limit a cAMP-dependent response. If that enzyme becomes less active, cAMP may remain available longer. The downstream response may then last longer. Changes to pathway components can affect gene expression, metabolism, movement, or secretion. The outcome depends on the pathway's targets and the cell type.

Exam tip

When explaining a pathway change, trace its effect from the changed component to the cell's response.

Key term

receptor

A receptor is a protein that detects a signal and initiates a cellular response.

Part 3 done

4

Part 4 of 4: Mutations can make signaling pathways cause disease

A mutation can change the structure or amount of a pathway protein. Some changes leave a protein active without its usual signal. Others prevent activation even when the signal is present. Either change can disrupt the cell's normal response.

For example, a mutation might keep a signaling protein active. Its downstream targets would continue receiving the signal after they should stop. If those targets promote cell division, persistent signaling may contribute to cancer. A mutation that blocks signaling may instead prevent a cell from responding when needed. A mutation does not always cause disease; its effect depends on the protein, the pathway, and the affected cells.

Common mistake

A disease-causing pathway mutation need not affect the receptor. It can affect a relay protein or another component downstream.

Key terms · tap one for its definition

mutation

A mutation is a change in a DNA sequence that may alter the amount or function of a pathway protein.

signaling protein

A signaling protein relays information within a pathway by changing the activity of downstream components.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe how a phosphorylation cascade relays a signal within a cell.

    Show mark schemeHide mark scheme

    Model answer

    An activated kinase transfers a phosphate group from ATP to a target protein. This changes the target's activity. A series of such changes passes the signal to downstream targets.

    • 1 mark for stating that an activated kinase phosphorylates a target protein
    • 1 mark for stating that phosphorylation changes the target protein's activity
    • 1 mark for describing successive changes that relay the signal to downstream targets
  2. 2.Explain[3 marks]

    Explain how second messengers can amplify a signal.

    Show mark schemeHide mark scheme

    Model answer

    An activated pathway component can produce or release many second messenger molecules. These messengers act on proteins inside the cell. Their effects can activate many downstream targets, producing a larger response.

    • 1 mark for stating that one activated component can produce or release many second messenger molecules
    • 1 mark for stating that second messengers act on proteins inside the cell
    • 1 mark for linking their downstream effects to a larger cellular response
  3. 3.Identify[2 marks]

    Identify two second messengers described in this note.

    Show mark schemeHide mark scheme

    Model answer

    Cyclic AMP and calcium ions.

    • 1 mark for identifying cyclic AMP
    • 1 mark for identifying calcium ions
  4. 4.Predict[3 marks]

    Predict how reduced activity of a cAMP-breaking enzyme could affect a cAMP-dependent response.

    Show mark schemeHide mark scheme

    Model answer

    cAMP would be broken down more slowly and remain available longer. It could continue activating downstream proteins, making the response last longer.

    • 1 mark for predicting slower cAMP breakdown
    • 1 mark for stating that cAMP remains available to act on downstream proteins
    • 1 mark for predicting a longer-lasting response
  5. 5.Explain[3 marks]

    Explain how a mutation in a signaling protein could contribute to cancer.

    Show mark schemeHide mark scheme

    Model answer

    A mutation could keep the signaling protein active without its usual signal. It would continue activating downstream targets. If those targets promote cell division, persistent signaling could contribute to cancer.

    • 1 mark for stating that the mutation could keep the protein active without its usual signal
    • 1 mark for stating that downstream targets would continue receiving the signal
    • 1 mark for linking persistent signaling that promotes cell division to cancer

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State which molecule can act as a second messenger after a G protein-coupled receptor is activated.
Show answer and explanation

Answer: B · Worked explanation

Cyclic AMP is a small intracellular second messenger that can relay a signal from an activated receptor to target proteins. A peptide hormone is typically an extracellular first messenger, while the receptor itself is not the intracellular messenger produced downstream.
3.

Easy·Identify[1 mark]

A cell receives a signal that activates a pathway controlling gene expression. Identify a possible result of this pathway activation.
Show answer and explanation

Answer: A · Worked explanation

Signal transduction can regulate transcription factors and thereby change expression of particular target genes, altering cell function. The response depends on the pathway and cell context; activation does not permanently turn on every gene or necessarily change the cell type.
4.

Easy·Identify[1 mark]

Identify the mutation most likely to make a growth-promoting signaling pathway active even when its normal external signal is absent.
Show answer and explanation

Answer: B · Worked explanation

A downstream protein that remains active can keep relaying a growth-promoting signal without ligand binding to the receptor. The other changes are more likely to reduce signaling: they impair receptor availability or ligand binding, or increase removal of a second messenger.
5.

Medium·Deduce[2 marks]

In a liver cell, epinephrine activates a receptor, a G protein, and adenylyl cyclase. After stimulation, intracellular cyclic AMP rises and glycogen breakdown increases. Deduce the role of cyclic AMP in this response.
Show answer and explanation

Answer: A · Worked explanation

Adenylyl cyclase produces cyclic AMP downstream of receptor and G-protein activation, and cyclic AMP relays the signal to intracellular targets that promote glycogen breakdown. It is not the membrane receptor or a carrier for epinephrine; nor does it directly catalyze glycogen breakdown.
6.

Medium·Calculate[2 marks]

One activated receptor causes 8 signaling proteins to become active. Each of those activates 6 molecules of the next protein in the pathway. If each activated molecule at this second step activates 5 final target molecules, how many final target molecules can be activated?
Show answer and explanation

Answer: A · Worked explanation

The first step activates 8×6=488 \times 6 = 488×6=48 molecules of the next protein. Each of those activates 5 final targets, so 48×5=24048 \times 5 = 24048×5=240 final target molecules can be activated. The value 48 counts the intermediate molecules, not the final targets.
7.

Medium·Explain[2 marks]

A signaling molecule activates a membrane receptor that stimulates phospholipase C. Phospholipase C produces IP3, after which calcium concentration rises in the cytoplasm. Explain the role of IP3 in this pathway.
Show answer and explanation

Answer: A · Worked explanation

IP3 is an intracellular second messenger produced downstream of receptor activation; it can trigger release of stored calcium into the cytoplasm, helping relay the signal. It is not the extracellular ligand, and its described role is not to pump calcium out of the cell or permanently bind DNA.
8.

Medium·Determine[2 marks]

A cell normally responds to a hormone by activating a kinase cascade. A drug blocks the kinase immediately downstream of the hormone receptor, while receptor binding remains normal. Determine the most likely effect.
Show answer and explanation

Answer: B · Worked explanation

Blocking the kinase downstream of the receptor interrupts signal relay, so receptor binding can occur while downstream responses are reduced. The receptor is not stated to be destroyed, and inhibiting a component of the cascade would not ordinarily strengthen the pathway or convert the hormone into a second messenger.
9.

Medium·Deduce[2 marks]

A mutation causes Ras, a protein in a growth-signaling pathway, to remain active after the receptor signal has ended. Deduce the likely effect on the cell.
Show answer and explanation

Answer: A · Worked explanation

If Ras remains active after the initiating signal ends, it can continue activating downstream growth signaling and may contribute to uncontrolled cell division. This is a gain-of-function effect in one pathway component, not a universal loss of receptor signaling or destruction of all second messengers.
10.

Hard·Compare[2 marks]

Two cell lines have mutations in the same growth-signaling pathway. Line X has a receptor that cannot bind its ligand; line Y has a downstream protein that is active without receptor input. Compare their expected responses when ligand is added.
Show answer and explanation

Answer: C · Worked explanation

Line X has impaired ligand recognition, so receptor-dependent pathway activation is likely reduced when ligand is added. Line Y has a downstream component that is active without receptor input, so its pathway may remain active even without ligand. The mutations affect different steps and therefore need not produce the same effect.

Keep going

Next topic4.4 FeedbackPrevious topic4.2 Introduction to signal transduction

More in Unit 4 · Cell Communication and Cell Cycle

  1. 4.1Cell communicationNotes · 10 questions
  2. 4.2Introduction to signal transductionNotes · 10 questions
  3. 4.3Signal transduction pathwaysNotes · 10 questions
  4. 4.4FeedbackNotes · 10 questions
  5. 4.5Cell cycleNotes · 10 questions
  6. 4.6Regulation of cell cycleNotes · 10 questions

All AP Biology topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Protein interactions relay signals through the cell
  2. 2Second messengers spread and amplify signals inside cells
  3. 3Pathway changes alter the strength and duration of responses
  4. 4Mutations can make signaling pathways cause disease
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe