Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus AB
  3. ›1 Limits and Continuity
  4. ›1.10 Types of discontinuities

AP Calculus AB · Unit 1 · Limits and Continuity

1.10 Types of discontinuities

Identify removable, jump, and infinite discontinuities, and explain their effects using graphs and examples.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4One-sided behavior helps classify a discontinuity
  1. 1One-sided behavior helps classify a discontinuity
  2. 2A removable discontinuity leaves a single missing limit value
  3. 3A jump separates two finite approaches
  4. 4An infinite discontinuity has unbounded behavior nearby
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: One-sided behavior helps classify a discontinuity

A function has continuity at a point when its limit equals its value there. At a discontinuity, compare what happens as xxx approaches from each side. These approaches give the one-sided limits. Also check whether the function has a value at the point. Together, these observations distinguish a hole, a jump, and unbounded behavior. The function's value alone cannot tell you which type occurs.

Figure 1. Compare the heights approached from each side. An open circle marks a point missing from the graph.

Exam tip

Check both sides before naming a discontinuity. An open circle alone does not show the whole behavior.

Key terms · tap one for its definition

continuity

A function is continuous at a point when its limit there exists and equals its function value.

one-sided limits

One-sided limits describe the values a function approaches from the left or right of a point.

Part 1 done

2

Part 2 of 4: A removable discontinuity leaves a single missing limit value

A removable discontinuity occurs when both sides approach the same finite value, but the function does not equal that value. On a graph, this often appears as a hole. The point may be undefined, or a filled dot may sit at another height. For example, let f(x)=x2−1x−1f(x)=\frac{x^2-1}{x-1}f(x)=x−1x2−1​ for x≠1x\ne1x=1, with f(1)f(1)f(1) undefined. Near x=1x=1x=1, the graph follows y=x+1y=x+1y=x+1, so both sides approach 2. The missing value interrupts the graph at one point. Setting f(1)=2f(1)=2f(1)=2 would make the function continuous there.

Key terms · tap one for its definition

removable discontinuity

A removable discontinuity occurs when a finite limit exists but does not equal the function value, or the value is undefined.

hole

A hole is a missing point on a graph where nearby values approach one finite height.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the discontinuity at x=2x=2x=2 if a graph approaches the same finite height from both sides but has a hole there.
Show answer and explanation

Answer: B · Worked explanation

Both one-sided limits approach the same finite value, but the graph is missing the point at that height. That is the defining behavior of a removable discontinuity. A jump would have unequal finite one-sided limits, while an infinite discontinuity would involve unbounded behavior.
3

Part 3 of 4: A jump separates two finite approaches

A jump discontinuity occurs when the one-sided limits are finite but unequal. The graph approaches different heights from the left and right. No choice of a single function value can make those approaches agree. A piecewise function can show this clearly: let g(x)=1g(x)=1g(x)=1 for x<0x<0x<0, and g(x)=3g(x)=3g(x)=3 for x≥0x\ge0x≥0. At x=0x=0x=0, the left side approaches 1, while the right side approaches 3. The value g(0)=3g(0)=3g(0)=3 does not remove the jump.

Worked example

Classify a boundary point

For g(x)=1g(x)=1g(x)=1 when x<0x<0x<0 and g(x)=3g(x)=3g(x)=3 when x≥0x\ge0x≥0, classify the discontinuity at x=0x=0x=0.
  1. 1
    Approaching from the left gives lim⁡x→0−g(x)=1\lim_{x\to0^-}g(x)=1limx→0−​g(x)=1.
  2. 2
    Approaching from the right gives lim⁡x→0+g(x)=3\lim_{x\to0^+}g(x)=3limx→0+​g(x)=3.
  3. 3
    Since 1≠31\ne31=3, the one-sided limits disagree.

Answer: There is a jump discontinuity at x=0x=0x=0. The function values are dimensionless.

Key terms · tap one for its definition

jump discontinuity

A jump discontinuity occurs when the left- and right-hand limits are finite and unequal.

piecewise function

A piecewise function uses different rules on different parts of its domain.

Part 3 done

4

Part 4 of 4: An infinite discontinuity has unbounded behavior nearby

An infinite discontinuity occurs when function values grow without bound in at least one direction near a point. The graph rises or falls steeply beside a vertical asymptote. For example, h(x)=1xh(x)=\frac{1}{x}h(x)=x1​ has an infinite discontinuity at x=0x=0x=0. Its values decrease without bound from the left and increase without bound from the right. Unlike a removable discontinuity, this behavior cannot be fixed by assigning one value at x=0x=0x=0. When reading a graph, look for unbounded behavior, not just a steep section.

Common mistake

A vertical asymptote does not require both sides to approach infinity in the same direction. One side may rise while the other falls.

Key terms · tap one for its definition

infinite discontinuity

An infinite discontinuity occurs where function values become unbounded from at least one side.

vertical asymptote

A vertical asymptote is a vertical line approached as function values become unbounded nearby.

Note read

Check your recall[11 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[1 mark]

    Identify the discontinuity shown by a hole where both sides approach the same finite height.

    Show mark schemeHide mark scheme

    Model answer

    It is a removable discontinuity.

    • 1 mark for identifying a removable discontinuity
  2. 2.Explain[2 marks]

    Explain why assigning a value at a jump cannot make the function continuous there.

    Show mark schemeHide mark scheme

    Model answer

    The finite one-sided limits are unequal, so the overall limit does not exist. Assigning one function value cannot make those limits agree.

    • 1 mark for stating that the finite one-sided limits are unequal
    • 1 mark for explaining that changing one function value cannot make the one-sided limits agree
  3. 3.Describe[3 marks]

    Describe the graph near an infinite discontinuity and give an example.

    Show mark schemeHide mark scheme

    Model answer

    The graph becomes unbounded near a vertical line. That line is a vertical asymptote. For example, h(x)=1xh(x)=\frac{1}{x}h(x)=x1​ has an infinite discontinuity at x=0x=0x=0.

    • 1 mark for describing function values that become unbounded near the point
    • 1 mark for identifying a vertical asymptote
    • 1 mark for giving h(x)=1xh(x)=\frac{1}{x}h(x)=x1​ at x=0x=0x=0 or another valid example
  4. 4.Determine[2 marks]

    Determine the discontinuity at x=0x=0x=0 if the left-hand limit is 2 and the right-hand limit is 5.

    Show mark schemeHide mark scheme

    Model answer

    The discontinuity is a jump because the one-sided limits are finite and unequal.

    • 1 mark for identifying a jump discontinuity
    • 1 mark for using the finite, unequal one-sided limits to justify it
  5. 5.Explain[3 marks]

    Explain how to make f(x)=x2−1x−1f(x)=\frac{x^2-1}{x-1}f(x)=x−1x2−1​ continuous at x=1x=1x=1, given that f(1)f(1)f(1) is undefined.

    Show mark schemeHide mark scheme

    Model answer

    For x≠1x\ne1x=1, f(x)=x+1f(x)=x+1f(x)=x+1. Both sides therefore approach 2 as xxx approaches 1. Define f(1)=2f(1)=2f(1)=2 to fill the hole.

    • 1 mark for simplifying the expression to x+1x+1x+1 for x≠1x\ne1x=1
    • 1 mark for finding the limit 2 at x=1x=1x=1
    • 1 mark for setting f(1)=2f(1)=2f(1)=2

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State what happens to the one-sided limits at a jump discontinuity.
Show answer and explanation

Answer: B · Worked explanation

At a jump discontinuity, the left- and right-hand limits are both finite but approach different values. A missing function value with equal finite limits describes a removable discontinuity instead. Unbounded behavior is associated with an infinite discontinuity.
3.

Easy·Identify[1 mark]

Identify the type of discontinuity of f(x)=1/xf(x)=1/xf(x)=1/x at x=0x=0x=0.
Show answer and explanation

Answer: D · Worked explanation

As xxx approaches 0, the values of 1/x1/x1/x become unbounded: they decrease without bound from the left and increase without bound from the right. This is an infinite discontinuity, with a vertical asymptote at x=0x=0x=0. The opposite directions on the two sides do not make it a jump.
4.

Easy·Identify[1 mark]

Identify the discontinuity described by a graph whose left and right branches approach different finite heights at the same xxx-value.
Show answer and explanation

Answer: C · Worked explanation

Different finite heights mean that the left- and right-hand limits exist as finite values but are unequal. This is a jump discontinuity. A hole alone does not imply a jump: for a removable discontinuity, both sides approach the same finite height.
5.

Medium·Determine[1 mark]

For p(x)=x2−9x−3p(x)=\frac{x^2-9}{x-3}p(x)=x−3x2−9​ when x≠3x\ne3x=3, with p(3)=4p(3)=4p(3)=4, determine the type of discontinuity at x=3x=3x=3.
Show answer and explanation

Answer: C · Worked explanation

For x≠3x\ne3x=3, factor and cancel to get p(x)=x+3p(x)=x+3p(x)=x+3, so both one-sided limits at 3 equal 6. The defined value is p(3)=4p(3)=4p(3)=4, which differs from that limit, making the discontinuity removable. Unequal finite limits would be needed for a jump.
6.

Medium·Determine[1 mark]

A function has left-hand limit -2 and right-hand limit 5 at x=1x=1x=1. Its value at x=1x=1x=1 is 100. Determine whether changing that function value alone can make the function continuous at x=1x=1x=1.
Show answer and explanation

Answer: D · Worked explanation

Continuity requires the two-sided limit to exist and equal the function value. Since the one-sided limits are -2 and 5, they disagree, so no single function value can make the function continuous there. Setting the value to either limit, or to their average, cannot change the one-sided behavior.
7.

Medium·Identify[1 mark]

Which function gives an example of a jump discontinuity at x=0x=0x=0?
Show answer and explanation

Answer: B · Worked explanation

For sss, the left-hand limit is 1 and the right-hand limit is 4, so it has a jump discontinuity. The function ttt has an infinite discontinuity at zero. Both rrr and uuu are continuous at zero.
8.

Medium·Explain[2 marks]

A graph has a vertical asymptote at x=4x=4x=4. Explain what this implies about the function near x=4x=4x=4.
Show answer and explanation

Answer: A · Worked explanation

A vertical asymptote indicates that function values become unbounded as the input approaches the asymptote, from at least one side. The behavior need not be unbounded in the same direction on both sides. Approaching a common finite value describes removable behavior, not an infinite discontinuity.
9.

Medium·Deduce[2 marks]

For a function qqq, the left-hand limit at x=2x=2x=2 is 7, the right-hand limit is also 7, and q(2)=−1q(2)=-1q(2)=−1. Deduce how the function's discontinuity could be removed.
Show answer and explanation

Answer: A · Worked explanation

The two one-sided limits agree, so the limit at x=2x=2x=2 exists and equals 7. The discontinuity is removable because the function value is different from that limit; defining q(2)=7q(2)=7q(2)=7 makes the value match. Setting it to 3 would still leave the value unequal to the limit.
10.

Hard·Classify[2 marks]

A function has a finite value at x=0x=0x=0. As xxx approaches 0 from the left, its values approach 2; from the right, its values increase without bound. Classify the behavior at x=0x=0x=0.
Show answer and explanation

Answer: C · Worked explanation

The right-hand behavior is unbounded, which is sufficient for an infinite discontinuity even though the left-hand values approach the finite number 2. Having a function value at zero does not make the function continuous when its nearby behavior is unbounded. A jump requires both one-sided limits to be finite.

Keep going

Next topic1.11 Continuity at a pointPrevious topic1.9 Multiple representations of limits

More in Unit 1 · Limits and Continuity

  1. 1.6Limits by algebraic manipulationNotes · 10 questions
  2. 1.7Choosing a limit procedureNotes · 10 questions
  3. 1.8Squeeze theoremNotes · 10 questions
  4. 1.9Multiple representations of limitsNotes · 10 questions
  5. 1.10Types of discontinuitiesNotes · 10 questions
  6. 1.11Continuity at a pointNotes · 10 questions
  7. 1.12Continuity over an intervalNotes · 10 questions
  8. 1.13Removing discontinuitiesNotes · 10 questions
  9. 1.14Infinite limits and vertical asymptotesNotes · 10 questions

All AP Calculus AB topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1One-sided behavior helps classify a discontinuity
  2. 2A removable discontinuity leaves a single missing limit value
  3. 3A jump separates two finite approaches
  4. 4An infinite discontinuity has unbounded behavior nearby
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe