Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus AB
  3. ›2 Differentiation: Definition and Fundamental Properties
  4. ›2.3 Estimating derivatives at a point

AP Calculus AB · Unit 2 · Differentiation: Definition and Fundamental Properties

2.3 Estimating derivatives at a point

Estimate derivatives from tables, graphs, and numerical difference quotients.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A derivative estimate describes the slope near one point
  1. 1A derivative estimate describes the slope near one point
  2. 2Nearby table values can estimate a derivative
  3. 3A drawn tangent gives a graphical slope estimate
  4. 4Numerical quotients improve when inputs approach the target
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A derivative estimate describes the slope near one point

The derivative at a point gives the slope of the tangent line there. You can estimate it without knowing a formula for the function. Use nearby values to find the slope of a secant line. A secant line joins two points on the graph. Its slope is a difference quotient, f(b)−f(a)b−a\frac{f(b)-f(a)}{b-a}b−af(b)−f(a)​. Choose aaa and bbb close to the point of interest. The secant slope then provides an estimate of the tangent slope.

Common mistake

A secant slope is not automatically the derivative. It estimates the derivative when its points are sufficiently close to the target point.

Key terms · tap one for its definition

derivative at a point

The derivative at a point is the slope of the tangent line to the function's graph there.

secant line

A secant line passes through two points on a graph.

difference quotient

A difference quotient divides the change in a function's output by the corresponding change in input.

Part 1 done

2

Part 2 of 4: Nearby table values can estimate a derivative

To estimate f′(c)f'(c)f′(c) from a table, use values with inputs near ccc. A central difference uses one input on each side of ccc. Compute f(c+h)−f(c−h)2h\frac{f(c+h)-f(c-h)}{2h}2hf(c+h)−f(c−h)​ when both values are available. This often balances the changes on either side. A one-sided difference uses ccc and a nearby input on only one side. Use it when the table lacks a suitable value on the other side. Smaller input gaps often help, but rounded or noisy values can make an estimate less reliable.

Exam tip

Show the two inputs used in your quotient. Include slope units when the table gives units for both variables.

Key terms · tap one for its definition

central difference

A central difference estimates slope using function values at inputs on opposite sides of the target.

one-sided difference

A one-sided difference estimates slope using the target input and another input on one side.

Part 2 done

Quick check

One question on the part you just read

Easy

Estimate f′(4)f'(4)f′(4) from the table values f(3.9)=10.2f(3.9)=10.2f(3.9)=10.2 and f(4.1)=11.0f(4.1)=11.0f(4.1)=11.0 using a central difference.
Show answer and explanation

Answer: D · Worked explanation

The inputs are equally spaced around 4, so use the central difference: (11.0−10.2)/(4.1−3.9)=0.8/0.2=4(11.0-10.2)/(4.1-3.9)=0.8/0.2=4(11.0−10.2)/(4.1−3.9)=0.8/0.2=4. The tempting value 0.8 is only the change in the function values; a slope also divides by the input change.
3

Part 3 of 4: A drawn tangent gives a graphical slope estimate

On a graph, sketch the tangent line at the requested point. Match the curve's direction there, rather than joining distant points on the curve. Choose two clear points on your drawn line. They need not lie on the curve. Divide the line's vertical change by its horizontal change. Read both changes from the axis scales. A rising tangent has positive slope, while a falling tangent has negative slope. Graph thickness and reading precision make the result approximate.

Figure 1. Read the rise and run along the tangent, not between distant points on the curve.

For example, a tangent passing through (1,2)(1,2)(1,2) and (3,6)(3,6)(3,6) has estimated slope 6−23−1=2\frac{6-2}{3-1}=23−16−2​=2. Use points far apart on the tangent to reduce reading error. Check that the line touches the curve at the requested input.

Key term

tangent line

A tangent line has the graph's slope at the point where it touches the graph.

Part 3 done

4

Part 4 of 4: Numerical quotients improve when inputs approach the target

When a formula is available, evaluate a nearby-input quotient such as f(c+h)−f(c)h\frac{f(c+h)-f(c)}{h}hf(c+h)−f(c)​. Try nonzero values of hhh closer to zero. You can use positive and negative values to check both sides. If the slopes approach the same number, that number estimates f′(c)f'(c)f′(c). Never substitute h=0h=0h=0 into the quotient, because its denominator would be zero. Compare estimates instead of assuming that one calculation is exact.

Worked example

Estimate a derivative from nearby inputs

For f(x)=x2f(x)=x^2f(x)=x2, estimate f′(2)f'(2)f′(2) using h=0.1h=0.1h=0.1 and h=−0.1h=-0.1h=−0.1.
  1. 1
    Find f(2)=4f(2)=4f(2)=4, f(2.1)=4.41f(2.1)=4.41f(2.1)=4.41, and f(1.9)=3.61f(1.9)=3.61f(1.9)=3.61.
  2. 2
    For h=0.1h=0.1h=0.1, calculate 4.41−40.1=4.1\frac{4.41-4}{0.1}=4.10.14.41−4​=4.1.
  3. 3
    For h=−0.1h=-0.1h=−0.1, calculate 3.61−4−0.1=3.9\frac{3.61-4}{-0.1}=3.9−0.13.61−4​=3.9.
  4. 4
    Compare the estimates: 3.9 and 4.1 lie around 4.

Answer: The estimated derivative is about 4. No axis units are specified.

Common mistake

Do not divide by the change in output. Slope is change in output divided by change in input.

Key term

nearby-input quotient

A nearby-input quotient uses a nonzero input change to estimate the derivative at a chosen input.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State what the derivative at a point tells you about a graph.

    Show mark schemeHide mark scheme

    Model answer

    It gives the slope of the tangent line at that point.

    • 1 mark for stating that it gives the tangent line's slope at that point
  2. 2.Calculate[3 marks]

    Calculate a central-difference estimate of f′(3)f'(3)f′(3) from f(2.8)=7.4f(2.8)=7.4f(2.8)=7.4 and f(3.2)=8.6f(3.2)=8.6f(3.2)=8.6.

    Show mark schemeHide mark scheme

    Model answer

    The input change is 3.2−2.8=0.43.2-2.8=0.43.2−2.8=0.4. Thus f′(3)≈8.6−7.40.4=3f'(3)\approx\frac{8.6-7.4}{0.4}=3f′(3)≈0.48.6−7.4​=3.

    • 1 mark for using the output change 8.6−7.48.6-7.48.6−7.4
    • 1 mark for using the input change 3.2−2.83.2-2.83.2−2.8
    • 1 mark for obtaining the estimate 3
  3. 3.Explain[3 marks]

    Explain how to estimate a derivative from a graph with a drawn tangent.

    Show mark schemeHide mark scheme

    Model answer

    Draw a line matching the curve's direction at the target point. Choose two readable points on that line. Divide their vertical change by their horizontal change, using the axis scales.

    • 1 mark for drawing a tangent that matches the curve's direction at the target point
    • 1 mark for choosing two readable points on the tangent line
    • 1 mark for dividing vertical change by horizontal change using the axis scales
  4. 4.Calculate[3 marks]

    Calculate a one-sided estimate of f′(5)f'(5)f′(5) if f(5)=12f(5)=12f(5)=12 and f(5.2)=11.5f(5.2)=11.5f(5.2)=11.5.

    Show mark schemeHide mark scheme

    Model answer

    Using the given inputs, f′(5)≈11.5−125.2−5=−0.50.2=−2.5f'(5)\approx\frac{11.5-12}{5.2-5}=\frac{-0.5}{0.2}=-2.5f′(5)≈5.2−511.5−12​=0.2−0.5​=−2.5.

    • 1 mark for using the output change 11.5−1211.5-1211.5−12
    • 1 mark for using the input change 5.2−55.2-55.2−5
    • 1 mark for obtaining the estimate -2.5
  5. 5.Explain[3 marks]

    Explain why nearby-input quotients use nonzero changes approaching zero.

    Show mark schemeHide mark scheme

    Model answer

    A quotient with a smaller input change uses points closer to the target. Its secant slope can approach the tangent slope. The change cannot equal zero because that would make the denominator zero.

    • 1 mark for noting that smaller input changes place the points closer to the target
    • 1 mark for linking approaching secant slopes to the tangent slope
    • 1 mark for stating that a zero input change causes division by zero

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A tangent line drawn to a curve at the point of interest rises 3 units for every 2 units it moves to the right. Identify the estimated derivative at that point.
Show answer and explanation

Answer: D · Worked explanation

The derivative is estimated by the tangent line's slope, which is vertical change divided by horizontal change: 3/23/23/2. The tempting value 2/32/32/3 reverses rise and run, while the negative choices incorrectly treat a rising tangent as falling.
3.

Easy·Identify[1 mark]

For a nearby-input quotient used to estimate f′(c)f'(c)f′(c), which choice of input change is valid?
Show answer and explanation

Answer: A · Worked explanation

A nearby-input quotient uses a nonzero change such as hhh and compares estimates as hhh gets closer to zero. Substituting h=0h=0h=0 makes the denominator zero, so the quotient is undefined; it does not directly calculate the derivative.
4.

Easy·Identify[1 mark]

A table gives values only at inputs 6 and 6.1, and the goal is to estimate f′(6)f'(6)f′(6). Which difference is the appropriate one-sided estimate?
Show answer and explanation

Answer: A · Worked explanation

The one-sided slope uses change in output divided by change in input: [f(6.1)−f(6)]/(6.1−6)=[f(6.1)−f(6)]/0.1[f(6.1)-f(6)]/(6.1-6)=[f(6.1)-f(6)]/0.1[f(6.1)−f(6)]/(6.1−6)=[f(6.1)−f(6)]/0.1. Reversing only the output difference changes the sign, and dividing by the input value rather than its change does not give a slope.
5.

Medium·Estimate[2 marks]

A table gives f(2.9)=5.62f(2.9)=5.62f(2.9)=5.62, f(3.0)=6.00f(3.0)=6.00f(3.0)=6.00, and f(3.2)=6.88f(3.2)=6.88f(3.2)=6.88. Estimate f′(3)f'(3)f′(3) using the available inputs on opposite sides of 3.
Show answer and explanation

Answer: D · Worked explanation

The available inputs on opposite sides are 2.9 and 3.2. Their secant slope is (6.88−5.62)/(3.2−2.9)=1.26/0.3=4.2(6.88-5.62)/(3.2-2.9)=1.26/0.3=4.2(6.88−5.62)/(3.2−2.9)=1.26/0.3=4.2. Because the inputs are not equally spaced around 3, this is not a symmetric central difference.
6.

Medium·Determine[2 marks]

On a graph, a tangent at the target point passes through the readable points (1,5)(1,5)(1,5) and (4,2)(4,2)(4,2). Determine the estimated derivative at the target point.
Show answer and explanation

Answer: C · Worked explanation

The tangent's slope is vertical change divided by horizontal change: (2−5)/(4−1)=−3/3=−1(2-5)/(4-1)=-3/3=-1(2−5)/(4−1)=−3/3=−1. The tempting value 1 uses the size of the changes but loses the negative sign; the line falls as xxx increases.
7.

Medium·Calculate[2 marks]

For f(x)=x2+1f(x)=x^2+1f(x)=x2+1, calculate the nearby-input quotient estimate of f′(3)f'(3)f′(3) when h=0.2h=0.2h=0.2, using [f(3+h)−f(3)]/h[f(3+h)-f(3)]/h[f(3+h)−f(3)]/h.
Show answer and explanation

Answer: D · Worked explanation

Here f(3.2)=3.22+1=11.24f(3.2)=3.2^2+1=11.24f(3.2)=3.22+1=11.24 and f(3)=10f(3)=10f(3)=10, so the quotient is (11.24−10)/0.2=1.24/0.2=6.2(11.24-10)/0.2=1.24/0.2=6.2(11.24−10)/0.2=1.24/0.2=6.2. The tempting value 6.0 is the limiting derivative estimate, not the quotient for the specified nonzero hhh.
8.

Medium·Compare[2 marks]

Two candidate tangent lines at the same point on a curve are read from a graph. Line P rises 4 units over a run of 2 units; line Q falls 3 units over a run of 1 unit. The curve is rising at the point. Which line gives a plausible tangent-slope estimate?
Show answer and explanation

Answer: B · Worked explanation

Line P has slope 4/2=24/2=24/2=2, which is positive and therefore agrees with the curve rising at the point. Line Q has negative slope because it falls as the input increases, so it is inconsistent with the stated local direction.
9.

Medium·Determine[2 marks]

For f(x)=x2f(x)=x^2f(x)=x2, the nearby-input quotient at x=1x=1x=1 is calculated with h=0.01h=0.01h=0.01 and gives 2.01. Determine the corresponding quotient when h=−0.01h=-0.01h=−0.01.
Show answer and explanation

Answer: D · Worked explanation

For h=−0.01h=-0.01h=−0.01, the quotient is [(0.99)2−1]/(−0.01)=(−0.0199)/(−0.01)=1.99[(0.99)^2-1]/(-0.01)=(-0.0199)/(-0.01)=1.99[(0.99)2−1]/(−0.01)=(−0.0199)/(−0.01)=1.99. The tempting 2.01 is the estimate for positive hhh; using a negative input change reverses both the output change and denominator, giving a value just below 2.
10.

Hard·Deduce[2 marks]

A table lists f(1.98)=7.88f(1.98)=7.88f(1.98)=7.88, f(2.00)=8.00f(2.00)=8.00f(2.00)=8.00, f(2.01)=8.06f(2.01)=8.06f(2.01)=8.06, and f(2.03)=8.18f(2.03)=8.18f(2.03)=8.18. Which conclusion about f′(2)f'(2)f′(2) is best supported by these data?
Show answer and explanation

Answer: D · Worked explanation

The closest inputs bracketing 2 are 1.98 and 2.01. Their secant slope is (8.06−7.88)/(2.01−1.98)=0.18/0.03=6(8.06-7.88)/(2.01-1.98)=0.18/0.03=6(8.06−7.88)/(2.01−1.98)=0.18/0.03=6. Unequal spacing does not prevent a secant estimate, but this is not a symmetric central difference.

Keep going

Next topic2.4 Differentiability and continuityPrevious topic2.2 Definition of the derivative

More in Unit 2 · Differentiation: Definition and Fundamental Properties

  1. 2.1Average and instantaneous rates of changeNotes · 10 questions
  2. 2.2Definition of the derivativeNotes · 10 questions
  3. 2.3Estimating derivatives at a pointNotes · 10 questions
  4. 2.4Differentiability and continuityNotes · 10 questions
  5. 2.5Power ruleNotes · 10 questions
  6. 2.6Constant, sum, difference and constant multiple rulesNotes · 10 questions
  7. 2.7Derivatives of sin x, cos x, e^x and ln xNotes · 10 questions
  8. 2.8Product ruleNotes · 10 questions
  9. 2.9Quotient ruleNotes · 10 questions

All AP Calculus AB topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1A derivative estimate describes the slope near one point
  2. 2Nearby table values can estimate a derivative
  3. 3A drawn tangent gives a graphical slope estimate
  4. 4Numerical quotients improve when inputs approach the target
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe