Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus AB
  3. ›6 Integration and Accumulation of Change
  4. ›6.1 Accumulation of change

AP Calculus AB · Unit 6 · Integration and Accumulation of Change

6.1 Accumulation of change

Explain how integration measures accumulated change, interpret it in context, and relate it to area.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A rate tells how quickly a quantity changes
  1. 1A rate tells how quickly a quantity changes
  2. 2Area under a rate curve measures accumulated change
  3. 3Signed area distinguishes gains from losses
  4. 4Accumulated change updates an initial quantity
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A rate tells how quickly a quantity changes

A rate of change describes how much a quantity changes per unit of its input. For example, water flowing into a tank may be measured in liters per minute. The rate describes what is happening at a moment, not the total water added. Accumulated change combines the rate over an interval to find that total change. A faster rate, or a longer interval, generally produces more change.

Units help distinguish these ideas. A flow rate has units of liters per minute. Its accumulated change has units of liters. Integration is the operation that finds accumulated change from a varying rate.

Key terms · tap one for its definition

rate of change

A rate of change measures a quantity’s change per unit change in its input.

accumulated change

Accumulated change is the net change produced by a rate over an interval.

Part 1 done

2

Part 2 of 4: Area under a rate curve measures accumulated change

On a graph of rate against time, a thin region has area approximately equal to rate times elapsed time. Adding these regions across an interval gives the definite integral of the rate. When the rate stays above the time axis, this integral equals the ordinary area under the curve. Its units come from multiplying the graph’s vertical and horizontal units.

Worked example

Water added to a tank

Water enters a tank at rate r(t)=2tr(t)=2tr(t)=2t liters per minute, from t=0t=0t=0 to t=4t=4t=4 minutes. Find the water added.
  1. 1
    Graph r(t)=2tr(t)=2tr(t)=2t from t=0t=0t=0 to t=4t=4t=4. The region below it is a triangle.
  2. 2
    Its base is 4 minutes, and its height is r(4)=8r(4)=8r(4)=8 liters per minute.
  3. 3
    Area =12(4)(8)=16=\frac{1}{2}(4)(8)=16=21​(4)(8)=16 liters.

Answer: The tank gains 16 liters of water.

Figure 1. The shaded triangle represents water added over four minutes. Its area is 16 liters.

Key terms · tap one for its definition

definite integral

A definite integral of a rate over an interval measures its accumulated, signed change.

area under the curve

For a nonnegative rate, the area between its graph and the horizontal axis equals its accumulated change.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify what the definite integral of a rate of change over an interval represents.
Show answer and explanation

Answer: B · Worked explanation

A definite integral combines the rate across the interval, accounting for both the size and sign of the rate. The result is the net change in the quantity, not its value at a particular instant. The starting value is not determined by the integral alone; it is needed to calculate the final value.
3

Part 3 of 4: Signed area distinguishes gains from losses

A rate can be negative. For example, a negative water flow rate can describe water leaving a tank. Regions above the horizontal axis contribute positively to the integral. Regions below it contribute negatively. Their sum is net change, which can be smaller than the positive contribution.

This differs from total change in magnitude. If a tank gains 10 liters and then loses 4 liters, its net change is 6 liters. The total amount moved is 14 liters. Context determines which quantity matters: the final tank level depends on net change.

Common mistake

Do not count area below the axis as a gain. It represents negative accumulated change.

Key terms · tap one for its definition

net change

Net change combines positive changes and negative changes, keeping their signs.

total change in magnitude

Total change in magnitude adds the sizes of all changes without cancellation.

Part 3 done

4

Part 4 of 4: Accumulated change updates an initial quantity

An integral of a rate gives a change, not necessarily the quantity’s final value. To find the final value, add the accumulated change to the initial value. For a tank, this means initial water plus net water added. If the net change is negative, adding it lowers the final amount.

In any context, identify the quantity, its rate, and the interval first. Then interpret the integral using the quantity’s units. For instance, integrating velocity in miles per hour over hours gives displacement in miles. Negative velocity contributes negative displacement, even though the object still travels.

Exam tip

State whether your answer is a change or a final value. Include the quantity’s units.

Key terms · tap one for its definition

initial value

The initial value is the quantity’s amount at the start of the interval.

displacement

Displacement is net change in position, with direction represented by its sign.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain how integrating a water flow rate over time gives accumulated change.

    Show mark schemeHide mark scheme

    Model answer

    The integral combines the flow rate across the interval. It gives the net change in water, with units of liters.

    • 1 mark for stating that the rate is combined across the time interval
    • 1 mark for identifying the result as net change in water
    • 1 mark for giving liters as the units of accumulated change
  2. 2.Calculate[3 marks]

    Calculate the water added when r(t)=2tr(t)=2tr(t)=2t liters per minute from t=0t=0t=0 to t=4t=4t=4 minutes.

    Show mark schemeHide mark scheme

    Model answer

    The area is a triangle with base 4 minutes and height 8 liters per minute. Its area is 12(4)(8)=16\frac{1}{2}(4)(8)=1621​(4)(8)=16 liters, so 16 liters are added.

    • 1 mark for identifying a triangle with base 4 minutes
    • 1 mark for finding the height as 8 liters per minute
    • 1 mark for calculating 16 liters of water added
  3. 3.Compare[3 marks]

    Compare net change and total change in magnitude when a tank gains 10 liters and loses 4 liters.

    Show mark schemeHide mark scheme

    Model answer

    The net change is 10−4=610-4=610−4=6 liters because the loss is negative. The total change in magnitude is 10+4=1410+4=1410+4=14 liters.

    • 1 mark for treating the loss as negative when finding net change
    • 1 mark for calculating a net gain of 6 liters
    • 1 mark for calculating 14 liters as the total change in magnitude
  4. 4.Explain[2 marks]

    Explain what an area below the time axis means on a velocity graph.

    Show mark schemeHide mark scheme

    Model answer

    Velocity is negative there, so the area contributes negative displacement to the net change in position.

    • 1 mark for identifying velocity below the axis as negative
    • 1 mark for stating that it contributes negative displacement
  5. 5.Determine[2 marks]

    Determine the final amount of water in a tank holding 30 liters initially, after a net change of -6 liters.

    Show mark schemeHide mark scheme

    Model answer

    Add the net change to the initial amount: 30+(−6)=2430+(-6)=2430+(−6)=24. The tank ends with 24 liters.

    • 1 mark for adding the net change to the initial amount
    • 1 mark for giving a final amount of 24 liters

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A machine produces material at a rate measured in kilograms per hour. Identify the units of the material produced over a time interval.
Show answer and explanation

Answer: A · Worked explanation

Accumulating a production rate over time gives the amount of material produced. Multiplying kilograms per hour by hours leaves kilograms. Kilograms per hour describes the rate itself, not the accumulated amount.
3.

Easy·State[1 mark]

A rate is nonnegative throughout an interval. State what the area between its curve and the horizontal axis represents over that interval.
Show answer and explanation

Answer: C · Worked explanation

Because the rate is nonnegative, the area between its curve and the horizontal axis equals the definite integral of the rate. That integral gives the accumulated change over the interval. The initial value and maximum rate are different kinds of information and are not given by this area.
4.

Easy·Identify[1 mark]

Which quantity is obtained by integrating velocity with respect to time over an interval?
Show answer and explanation

Answer: B · Worked explanation

Velocity measures change in position per unit time, so accumulating velocity over time gives net change in position, called displacement. The result includes direction through its sign. Initial position requires an additional starting value, while acceleration and average velocity are not the accumulated quantity.
5.

Medium·Calculate[2 marks]

A positive rate increases linearly from 3 items per minute to 7 items per minute over 5 minutes. Calculate the accumulated increase in the number of items.
Show answer and explanation

Answer: C · Worked explanation

The area under the linear rate curve is a trapezoid, so the accumulated increase is the average rate times the elapsed time: 3+72×5=25\frac{3+7}{2}\times 5=2523+7​×5=25 items. The tempting answer of 15 items uses only the starting rate for all 5 minutes, ignoring that the rate rises during the interval.
6.

Medium·Determine[2 marks]

A store's inventory decreases at a constant rate of 6 boxes per day for 3 days. Determine the net change in its inventory over those days.
Show answer and explanation

Answer: A · Worked explanation

A decrease is a negative rate, so the net change is (−6)(3)=−18(-6)(3)=-18(−6)(3)=−18 boxes. The negative sign indicates that the inventory fell. The positive value of 18 boxes gives the size of the decrease but not the signed net change.
7.

Medium·Calculate[2 marks]

A rate of change is 4t4t4t units per second for 0≤t≤30\leq t\leq 30≤t≤3 seconds. Calculate the accumulated change over this interval using the area under the rate curve.
Show answer and explanation

Answer: C · Worked explanation

The rate rises linearly from 0 to 12 units per second, forming a triangle with base 3 seconds and height 12 units per second. Its area is 12(3)(12)=18\frac{1}{2}(3)(12)=1821​(3)(12)=18 units. The product 3×12=363\times12=363×12=36 would incorrectly treat the endpoint rate as if it held for the entire interval.
8.

Medium·Determine[2 marks]

A reservoir contains 120 gallons initially. Water flows in at a constant 8 gallons per minute for 5 minutes, with no water leaving. Determine the reservoir's final amount of water.
Show answer and explanation

Answer: A · Worked explanation

The accumulated increase is 8×5=408\times5=408×5=40 gallons. Add that change to the initial amount: 120+40=160120+40=160120+40=160 gallons. The value 40 gallons is the change alone, not the final amount; the initial water must also be included.
9.

Medium·Deduce[2 marks]

A rate curve is above the horizontal axis on the first part of an interval and below it on the rest. What does the definite integral over the whole interval represent?
Show answer and explanation

Answer: D · Worked explanation

A definite integral is signed: regions above the axis contribute positively and regions below it contribute negatively. Therefore, the integral is the positive area minus the size of the area below the axis. Adding both area sizes instead would give total change in magnitude, which does not account for cancellation.
10.

Hard·Determine[2 marks]

A tank starts with 50 liters. During the next 6 minutes, its flow rate is constant at 4 liters per minute for 2 minutes, then constant at -3 liters per minute for 4 minutes. Determine the amount of water in the tank at the end.
Show answer and explanation

Answer: A · Worked explanation

The first interval adds (4)(2)=8(4)(2)=8(4)(2)=8 liters, and the second changes the amount by (−3)(4)=−12(-3)(4)=-12(−3)(4)=−12 liters. The net change is 8−12=−48-12=-48−12=−4 liters, so the final amount is 50−4=4650-4=4650−4=46 liters. The 58-liter choice adds the gain but fails to subtract the water lost.

Keep going

Next topic6.2 Riemann sumsPrevious topic5.12 Behaviour of implicit relations

More in Unit 6 · Integration and Accumulation of Change

  1. 6.1Accumulation of changeNotes · 10 questions
  2. 6.2Riemann sumsNotes · 10 questions
  3. 6.3Summation and definite integral notationNotes · 10 questions
  4. 6.4FTC and accumulation functionsNotes · 10 questions
  5. 6.5Behaviour of accumulation functionsNotes · 10 questions
  6. 6.6Properties of definite integralsNotes · 10 questions
  7. 6.7FTC and definite integralsNotes · 10 questions
  8. 6.8Antiderivatives and indefinite integralsNotes · 10 questions
  9. 6.9Integration by substitutionNotes · 10 questions

All AP Calculus AB topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1A rate tells how quickly a quantity changes
  2. 2Area under a rate curve measures accumulated change
  3. 3Signed area distinguishes gains from losses
  4. 4Accumulated change updates an initial quantity
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Water added from a changing flow rate

Flow rate r(t) (L/min)01234502468Time t (min)
  • r(t) = 2t
  • (4, 8); height 8 L/min
  • base 4 min
  • area 16 L