Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus AB
  3. ›7 Differential Equations
  4. ›7.1 Modelling with differential equations

AP Calculus AB · Unit 7 · Differential Equations

7.1 Modelling with differential equations

Identify changing quantities, write differential equations for their rates, and interpret those equations in context.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Choose a variable before describing its rate
  1. 1Choose a variable before describing its rate
  2. 2Translate each process into a signed rate
  3. 3Interpret the equation at a stated value
  4. 4Match every model to its stated assumptions
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Choose a variable before describing its rate

A state variable measures the quantity that changes. Time is often the independent variable. For a tank, let V(t)V(t)V(t) be the water volume in liters after ttt minutes. Then dVdt\frac{dV}{dt}dtdV​ is the volume’s rate of change, measured in liters per minute. A positive rate means the tank is gaining water. A negative rate means it is losing water.

Define each symbol before writing an equation. In particular, distinguish a quantity from its rate. A statement about how much water is present describes VVV. A statement about how quickly that amount changes describes dVdt\frac{dV}{dt}dtdV​. Units help keep those statements separate.

Key terms · tap one for its definition

state variable

A state variable represents a quantity whose value changes in the modeled situation.

independent variable

An independent variable is the input used to describe changes in another quantity.

rate of change

A rate of change measures how quickly a quantity changes with respect to another variable.

Part 1 done

2

Part 2 of 4: Translate each process into a signed rate

A differential equation relates a changing quantity to its rate of change. For a tank, the net rate equals inflow minus outflow. Suppose water enters at 8 liters per minute. Suppose it leaves at a rate equal to 0.1V0.1V0.1V liters per minute. Then dVdt=8−0.1V\frac{dV}{dt}=8-0.1VdtdV​=8−0.1V, where ttt is in minutes and VVV is in liters. The coefficient 0.1 has units of inverse minutes.

The outflow is proportional to the current volume: more water means faster outflow. The equation models how the volume changes without giving its volume at every time.

Figure 1. Inflow adds to the volume. Outflow subtracts from it.

Key terms · tap one for its definition

differential equation

A differential equation is an equation involving a function and at least one of its derivatives.

proportional to

A rate proportional to a quantity equals a constant multiplied by that quantity.

Part 2 done

Quick check

One question on the part you just read

Easy

A researcher records the temperature of a cooling cup at different times. Which variable is the state variable if T(t)T(t)T(t) denotes the cup’s temperature?
Show answer and explanation

Answer: A · Worked explanation

The state variable is the quantity whose value changes in the situation, so it is TTT, the cup’s temperature. Time, ttt, is the independent variable, while dT/dtdT/dtdT/dt describes the temperature’s rate of change rather than the temperature itself.
3

Part 3 of 4: Interpret the equation at a stated value

In this tank model, the differential equation gives an instantaneous rate for each possible volume. In the tank model, substitute a volume into 8−0.1V8-0.1V8−0.1V to find the net rate at that volume. Report both the sign and the units. The sign tells you whether the volume is increasing or decreasing at that instant.

Worked example

Find the tank’s net rate

For dVdt=8−0.1V\frac{dV}{dt}=8-0.1VdtdV​=8−0.1V, find the rate when the tank contains 50 liters.
  1. 1
    Substitute V=50V=50V=50 into dVdt=8−0.1V\frac{dV}{dt}=8-0.1VdtdV​=8−0.1V.
  2. 2
    Calculate the outflow: 0.1(50)=50.1(50)=50.1(50)=5 liters per minute.
  3. 3
    Subtract outflow from inflow: 8−5=38-5=38−5=3 liters per minute.

Answer: The volume is increasing at 3 liters per minute.

Common mistake

A rate of 3 liters per minute is not a volume of 3 liters. Keep the quantity and its rate distinct.

Key term

instantaneous rate

An instantaneous rate is the rate of change at a particular value of the independent variable.

Part 3 done

4

Part 4 of 4: Match every model to its stated assumptions

Words such as “constant” and “proportional” describe different rate rules. A constant rate does not depend on the current quantity. A proportional rate changes as that quantity changes. For example, if medicine enters a container at 4 milligrams per hour and none leaves, its amount MMM satisfies dMdt=4\frac{dM}{dt}=4dtdM​=4.

If medicine also leaves at a rate proportional to the amount present, write dMdt=4−kM\frac{dM}{dt}=4-kMdtdM​=4−kM, where kkk is a positive constant. Here, kkk has units of inverse hours. The second equation assumes the input stays constant and the removal rule remains valid. Check each term’s sign and units against the situation.

Exam tip

When writing a model, define the variable and time unit. Then identify what increases and decreases the quantity.

Key term

constant rate

A constant rate has the same value regardless of the current quantity or time.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[1 mark]

    Identify what dVdt\frac{dV}{dt}dtdV​ measures when VVV is water volume in liters and ttt is time in minutes.

    Show mark schemeHide mark scheme

    Model answer

    It measures the instantaneous change in water volume, in liters per minute.

    • 1 mark for identifying the instantaneous change in volume per minute
  2. 2.Write[2 marks]

    Write a differential equation for an amount AAA that gains 6 grams per hour and loses 2 grams per hour.

    Show mark schemeHide mark scheme

    Model answer

    If ttt is measured in hours, dAdt=6−2=4\frac{dA}{dt}=6-2=4dtdA​=6−2=4 grams per hour.

    • 1 mark for representing the gain as a positive rate of 6 grams per hour
    • 1 mark for subtracting the loss to obtain dAdt=4\frac{dA}{dt}=4dtdA​=4 grams per hour
  3. 3.Write[3 marks]

    Write a differential equation for water volume VVV with constant inflow of 5 liters per minute and outflow of 0.2V0.2V0.2V liters per minute. Define the variables.

    Show mark schemeHide mark scheme

    Model answer

    Let VVV be the volume in liters after ttt minutes. Inflow adds 5 liters per minute, while outflow removes 0.2V0.2V0.2V liters per minute. Thus dVdt=5−0.2V\frac{dV}{dt}=5-0.2VdtdV​=5−0.2V.

    • 1 mark for defining VVV as volume in liters and ttt as time in minutes
    • 1 mark for representing constant inflow with +5+5+5
    • 1 mark for representing outflow with −0.2V-0.2V−0.2V in dVdt=5−0.2V\frac{dV}{dt}=5-0.2VdtdV​=5−0.2V
  4. 4.Calculate[3 marks]

    Calculate and interpret dVdt\frac{dV}{dt}dtdV​ when V=50V=50V=50 liters and dVdt=8−0.1V\frac{dV}{dt}=8-0.1VdtdV​=8−0.1V, with ttt in minutes.

    Show mark schemeHide mark scheme

    Model answer

    dVdt=8−0.1(50)=3\frac{dV}{dt}=8-0.1(50)=3dtdV​=8−0.1(50)=3 liters per minute. At 50 liters, the volume is increasing at 3 liters per minute.

    • 1 mark for substituting V=50V=50V=50 into the differential equation
    • 1 mark for calculating a rate of 3 liters per minute
    • 1 mark for interpreting the positive rate as increasing volume
  5. 5.Explain[3 marks]

    Explain what dMdt=4−kM\frac{dM}{dt}=4-kMdtdM​=4−kM means when MMM is medicine amount in milligrams, ttt is hours, and kkk is positive.

    Show mark schemeHide mark scheme

    Model answer

    Medicine enters at a constant 4 milligrams per hour. It leaves at a rate proportional to the amount present. The net rate is the entry rate minus the removal rate, in milligrams per hour.

    • 1 mark for identifying a constant input of 4 milligrams per hour
    • 1 mark for identifying removal proportional to the current amount
    • 1 mark for explaining that the difference gives the net rate in milligrams per hour

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Interpret[1 mark]

A model uses dP/dt=−2dP/dt=-2dP/dt=−2 people per hour for the population PPP of a small group. What does this statement mean at the time being considered?
Show answer and explanation

Answer: B · Worked explanation

The derivative gives the population’s instantaneous rate of change. Its negative sign means the population is decreasing, and its magnitude means the decrease is 2 people per hour. The statement does not say that the population itself equals 2 people.
3.

Easy·Write[1 mark]

A sensor reading RRR rises at a constant rate of 7 units per second, with time ttt measured in seconds. Which differential equation represents this situation?
Show answer and explanation

Answer: A · Worked explanation

A constant increase of 7 units per second means the rate dR/dtdR/dtdR/dt is always 7, independent of the current reading. The equation dR/dt=7RdR/dt=7RdR/dt=7R instead makes the rate proportional to the reading, while dR/dt=−7dR/dt=-7dR/dt=−7 would describe a constant decrease.
4.

Easy·Identify[1 mark]

A quantity QQQ is removed at a rate proportional to the amount currently present, and no other process changes it. Which equation has the appropriate sign and dependence on QQQ?
Show answer and explanation

Answer: D · Worked explanation

Removal makes the quantity decrease, so its rate has a negative sign. Proportional removal means the magnitude of the rate is a positive constant times the amount present, giving dQ/dt=−kQdQ/dt=-kQdQ/dt=−kQ. The constant-rate expression −k-k−k does not depend on the current amount.
5.

Medium·Write[2 marks]

A reservoir contains WWW gallons of water after ttt hours. Water enters at 12 gallons per hour, while water leaves at a constant 5 gallons per hour. Which model represents the net rate of change of water in the reservoir?
Show answer and explanation

Answer: B · Worked explanation

The net rate is the inflow minus the outflow: 12−5=712-5=712−5=7 gallons per hour, so dW/dt=12−5dW/dt=12-5dW/dt=12−5. Both processes have constant rates, so neither term should depend on the current volume. The expression 12−5W12-5W12−5W would instead model an outflow proportional to the amount of water.
6.

Medium·Identify[1 mark]

A population model is written as dN/dt=0.03NdN/dt=0.03NdN/dt=0.03N, where NNN is measured in individuals and ttt in days. What are the units of the coefficient 0.03?
Show answer and explanation

Answer: C · Worked explanation

The left side has units of individuals per day, and NNN has units of individuals. Therefore, the coefficient multiplying NNN must have units of inverse days so that their product is individuals per day. “Individuals per day” is the unit of the full rate, not of the coefficient.
7.

Medium·Calculate[2 marks]

The amount of dye DDD, in grams, in a container satisfies dD/dt=6−0.4DdD/dt=6-0.4DdD/dt=6−0.4D, where ttt is in minutes. Determine the instantaneous rate when the container holds 10 grams of dye.
Show answer and explanation

Answer: D · Worked explanation

Substitute D=10D=10D=10 into the model: dD/dt=6−0.4(10)=6−4=2dD/dt=6-0.4(10)=6-4=2dD/dt=6−0.4(10)=6−4=2 grams per minute. Because the rate is positive, the amount of dye is increasing at that instant. The value 10 grams is the amount present, not the rate of change.
8.

Medium·Write[2 marks]

A medication amount MMM is measured in milligrams and time ttt in hours. Medication enters at a rate that increases with time according to 2t2t2t milligrams per hour, and none leaves. Which equation models the amount’s rate of change?
Show answer and explanation

Answer: A · Worked explanation

The only process changing the amount is the input, so the rate of change equals the stated input rate, 2t2t2t milligrams per hour. The input depends on elapsed time, not on the amount already present. A negative sign would represent removal, and adding MMM would introduce a process not described.
9.

Medium·Determine[2 marks]

For a tank, VVV is measured in liters and ttt in minutes. Its model is dV/dt=9−0.3VdV/dt=9-0.3VdV/dt=9−0.3V. At V=20V=20V=20 liters, determine the inflow rate and the outflow rate represented by the model.
Show answer and explanation

Answer: B · Worked explanation

The positive constant term represents inflow at 9 liters per minute. At V=20V=20V=20, the outflow term is 0.3(20)=60.3(20)=60.3(20)=6 liters per minute, since the model subtracts 0.3V0.3V0.3V. The coefficient 0.3 alone is not the outflow rate; it must be multiplied by the current volume.
10.

Hard·Deduce[2 marks]

A tank’s volume VVV is measured in liters and time ttt in minutes. At a moment when V=30V=30V=30, the tank receives water at 10 liters per minute and loses water at a rate proportional to VVV. The net rate at that moment is 4 liters per minute. Which equation is consistent with this information for all VVV?
Show answer and explanation

Answer: A · Worked explanation

At V=30V=30V=30, the outflow must be 10−4=610-4=610−4=6 liters per minute. Since outflow is proportional to volume, its coefficient is 6/30=0.26/30=0.26/30=0.2 per minute, and it is subtracted from the constant inflow: dV/dt=10−0.2VdV/dt=10-0.2VdV/dt=10−0.2V. The coefficient 6 would incorrectly make the outflow at 30 liters equal to 180 liters per minute.

Keep going

Next topic7.2 Verifying solutionsPrevious topic6.14 Choosing an antidifferentiation technique

More in Unit 7 · Differential Equations

  1. 7.1Modelling with differential equationsNotes · 10 questions
  2. 7.2Verifying solutionsNotes · 10 questions
  3. 7.3Sketching slope fieldsNotes · 10 questions
  4. 7.4Reasoning with slope fieldsNotes · 10 questions
  5. 7.6General solutions by separation of variablesNotes · 10 questions
  6. 7.7Particular solutions with initial conditionsNotes · 10 questions
  7. 7.8Exponential modelsNotes · 10 questions

All AP Calculus AB topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Choose a variable before describing its rate
  2. 2Translate each process into a signed rate
  3. 3Interpret the equation at a stated value
  4. 4Match every model to its stated assumptions
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe