Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›10 Infinite Sequences and Series
  4. ›10.14 Taylor and Maclaurin series

AP Calculus BC · Unit 10 · Infinite Sequences and Series

10.14 Taylor and Maclaurin series

Write the Taylor and Maclaurin series for a function from its derivatives, and recognize the standard series for common functions.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
  • BC only
Start a Quick 5 on this topic→Jump to the 10 questions
1/6A Taylor series uses every derivative at one point
  1. 1A Taylor series uses every derivative at one point
  2. 2Four steps turn derivatives into a Taylor series
  3. 3A Maclaurin series is a Taylor series centered at zero
  4. 4Five common Maclaurin series are worth memorizing
  5. 5Partial sums match the function best near the center
  6. 6Recognizing a familiar pattern identifies the function
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: A Taylor series uses every derivative at one point

A Taylor polynomial stops after a few terms. Suppose the terms never stop. The infinite sum can then match a function exactly near a chosen input.

The Taylor series for fff centered at x=cx=cx=c is ∑n=0∞f(n)(c)n!(x−c)n\sum_{n=0}^{\infty}\frac{f^{(n)}(c)}{n!}(x-c)^n∑n=0∞​n!f(n)(c)​(x−c)n. The center is the input ccc where every derivative is evaluated. This is a power series, a sum of constant multiples of powers of x−cx-cx−c.

The first terms are f(c)+f′(c)(x−c)+f′′(c)2!(x−c)2+⋯f(c)+f'(c)(x-c)+\frac{f''(c)}{2!}(x-c)^2+\cdotsf(c)+f′(c)(x−c)+2!f′′(c)​(x−c)2+⋯. The n=0n=0n=0 term is f(c)f(c)f(c) because 0!=10!=10!=1. Cutting the sum off at degree nnn gives the Taylor polynomial.

Key terms · tap one for its definition

Taylor series

The Taylor series of a function fff centered at x=cx=cx=c is ∑n=0∞f(n)(c)n!(x−c)n\sum_{n=0}^{\infty}\frac{f^{(n)}(c)}{n!}(x-c)^n∑n=0∞​n!f(n)(c)​(x−c)n, when all derivatives exist at ccc.

center

The center of a Taylor series is the input value ccc at which each derivative of fff is evaluated.

power series

A power series is a series of the form ∑n=0∞an(x−c)n\sum_{n=0}^{\infty}a_n(x-c)^n∑n=0∞​an​(x−c)n with constant coefficients ana_nan​.

Part 1 done

2

Part 2 of 6: Four steps turn derivatives into a Taylor series

Applying the formula to a specific function is routine. Pick the center first, since it sets every value you compute. Then work through these steps in order.

  • Differentiate fff until a pattern in the derivatives appears.
  • Evaluate each derivative at the center ccc.
  • Divide each value by n!n!n! to get the coefficient.
  • Multiply by (x−c)n(x-c)^n(x−c)n and add the terms.

Worked example

Taylor series of ln x at x = 1

Find the first four nonzero terms of the Taylor series for f(x)=ln⁡xf(x)=\ln xf(x)=lnx centered at x=1x=1x=1, and write the general term.
  1. 1
    Differentiate: f′(x)=x−1f'(x)=x^{-1}f′(x)=x−1, f′′(x)=−x−2f''(x)=-x^{-2}f′′(x)=−x−2, f′′′(x)=2x−3f'''(x)=2x^{-3}f′′′(x)=2x−3, f(4)(x)=−6x−4f^{(4)}(x)=-6x^{-4}f(4)(x)=−6x−4.
  2. 2
    Evaluate at x=1x=1x=1: f(1)=0f(1)=0f(1)=0, f′(1)=1f'(1)=1f′(1)=1, f′′(1)=−1f''(1)=-1f′′(1)=−1, f′′′(1)=2f'''(1)=2f′′′(1)=2, f(4)(1)=−6f^{(4)}(1)=-6f(4)(1)=−6.
  3. 3
    Divide by n!n!n!: the coefficients are 1, −12-\frac{1}{2}−21​, 23!=13\frac{2}{3!}=\frac{1}{3}3!2​=31​, and −64!=−14-\frac{6}{4!}=-\frac{1}{4}−4!6​=−41​.
  4. 4
    Multiply each coefficient by (x−1)n(x-1)^n(x−1)n and add. The constant term is 0.

Answer: ln⁡x=(x−1)−(x−1)22+(x−1)33−(x−1)44+⋯\ln x=(x-1)-\frac{(x-1)^2}{2}+\frac{(x-1)^3}{3}-\frac{(x-1)^4}{4}+\cdotslnx=(x−1)−2(x−1)2​+3(x−1)3​−4(x−1)4​+⋯, with general term (−1)n+1(x−1)nn\frac{(-1)^{n+1}(x-1)^n}{n}n(−1)n+1(x−1)n​ for n≥1n\ge1n≥1.

Exam tip

List at least four derivatives before you claim a pattern. Two or three values can suggest the wrong rule.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the coefficient of (x−c)n(x-c)^n(x−c)n in the Taylor series for fff centered at x=cx=cx=c.
Show answer and explanation

Answer: C · Worked explanation

Each coefficient is the nth derivative evaluated at the center, divided by n!n!n!. Omitting n!n!n! would inflate every term past the first two. The expression with f(n)(0)f^{(n)}(0)f(n)(0) is the Maclaurin coefficient, which applies only when the center is 0, not at a general center ccc.
3

Part 3 of 6: A Maclaurin series is a Taylor series centered at zero

Many functions are simplest to study at the origin. The Maclaurin series for fff is the Taylor series with c=0c=0c=0, namely ∑n=0∞f(n)(0)n!xn\sum_{n=0}^{\infty}\frac{f^{(n)}(0)}{n!}x^n∑n=0∞​n!f(n)(0)​xn. Every power of x−cx-cx−c becomes a plain power of xxx.

Take f(x)=exf(x)=e^xf(x)=ex. Every derivative is exe^xex, and e0=1e^0=1e0=1. So each coefficient is 1n!\frac{1}{n!}n!1​, giving 1+x+x22!+x33!+⋯1+x+\frac{x^2}{2!}+\frac{x^3}{3!}+\cdots1+x+2!x2​+3!x3​+⋯.

Notice how little work this took. When the derivatives repeat or follow a clear cycle, the whole series comes from one pattern. That is why exponential, sine, and cosine functions are the standard examples.

Worked example

Maclaurin series of sin x

Find the first three nonzero terms of the Maclaurin series for sin⁡x\sin xsinx.
  1. 1
    The derivatives repeat in a cycle: sin⁡x\sin xsinx, cos⁡x\cos xcosx, −sin⁡x-\sin x−sinx, −cos⁡x-\cos x−cosx.
  2. 2
    Evaluate at 0. The values are 0,1,0,−1,0,1,…0, 1, 0, -1, 0, 1,\ldots0,1,0,−1,0,1,… for n=0,1,2,…n=0,1,2,\ldotsn=0,1,2,…
  3. 3
    Only odd powers survive. The coefficients are 11!\frac{1}{1!}1!1​, −13!-\frac{1}{3!}−3!1​, and 15!\frac{1}{5!}5!1​.
  4. 4
    Attach the powers xxx, x3x^3x3, and x5x^5x5.

Answer: sin⁡x=x−x33!+x55!−⋯\sin x=x-\frac{x^3}{3!}+\frac{x^5}{5!}-\cdotssinx=x−3!x3​+5!x5​−⋯, so the first three nonzero terms are x−x36+x5120x-\frac{x^3}{6}+\frac{x^5}{120}x−6x3​+120x5​.

Common mistake

The coefficient is f(n)(c)n!\frac{f^{(n)}(c)}{n!}n!f(n)(c)​, not f(n)(c)f^{(n)}(c)f(n)(c). Dropping the factorial changes every term past the first two.

Key term

Maclaurin series

The Maclaurin series of fff is its Taylor series centered at x=0x=0x=0, namely ∑n=0∞f(n)(0)n!xn\sum_{n=0}^{\infty}\frac{f^{(n)}(0)}{n!}x^n∑n=0∞​n!f(n)(0)​xn.

Part 3 done

4

Part 4 of 6: Five common Maclaurin series are worth memorizing

Deriving each series from scratch takes time, so learn the standard ones. The table also shows where each series equals its function. The geometric series gives 11−x\frac{1}{1-x}1−x1​ directly, since each term is xxx times the one before.

Standard Maclaurin series and where they equal the function

FunctionSeriesValid for
exe^xex∑n=0∞xnn!=1+x+x22!+⋯\sum_{n=0}^{\infty}\frac{x^n}{n!}=1+x+\frac{x^2}{2!}+\cdots∑n=0∞​n!xn​=1+x+2!x2​+⋯all real xxx
sin⁡x\sin xsinx∑n=0∞(−1)nx2n+1(2n+1)!=x−x33!+⋯\sum_{n=0}^{\infty}\frac{(-1)^n x^{2n+1}}{(2n+1)!}=x-\frac{x^3}{3!}+\cdots∑n=0∞​(2n+1)!(−1)nx2n+1​=x−3!x3​+⋯all real xxx
cos⁡x\cos xcosx∑n=0∞(−1)nx2n(2n)!=1−x22!+⋯\sum_{n=0}^{\infty}\frac{(-1)^n x^{2n}}{(2n)!}=1-\frac{x^2}{2!}+\cdots∑n=0∞​(2n)!(−1)nx2n​=1−2!x2​+⋯all real xxx
11−x\frac{1}{1-x}1−x1​∑n=0∞xn=1+x+x2+⋯\sum_{n=0}^{\infty}x^n=1+x+x^2+\cdots∑n=0∞​xn=1+x+x2+⋯−1<x<1-1<x<1−1<x<1
ln⁡(1+x)\ln(1+x)ln(1+x)∑n=1∞(−1)n+1xnn=x−x22+⋯\sum_{n=1}^{\infty}\frac{(-1)^{n+1}x^n}{n}=x-\frac{x^2}{2}+\cdots∑n=1∞​n(−1)n+1xn​=x−2x2​+⋯−1<x≤1-1<x\le1−1<x≤1
Function
exe^xex
Series
∑n=0∞xnn!=1+x+x22!+⋯\sum_{n=0}^{\infty}\frac{x^n}{n!}=1+x+\frac{x^2}{2!}+\cdots∑n=0∞​n!xn​=1+x+2!x2​+⋯
Valid for
all real xxx
Function
sin⁡x\sin xsinx
Series
∑n=0∞(−1)nx2n+1(2n+1)!=x−x33!+⋯\sum_{n=0}^{\infty}\frac{(-1)^n x^{2n+1}}{(2n+1)!}=x-\frac{x^3}{3!}+\cdots∑n=0∞​(2n+1)!(−1)nx2n+1​=x−3!x3​+⋯
Valid for
all real xxx
Function
cos⁡x\cos xcosx
Series
∑n=0∞(−1)nx2n(2n)!=1−x22!+⋯\sum_{n=0}^{\infty}\frac{(-1)^n x^{2n}}{(2n)!}=1-\frac{x^2}{2!}+\cdots∑n=0∞​(2n)!(−1)nx2n​=1−2!x2​+⋯
Valid for
all real xxx
Function
11−x\frac{1}{1-x}1−x1​
Series
∑n=0∞xn=1+x+x2+⋯\sum_{n=0}^{\infty}x^n=1+x+x^2+\cdots∑n=0∞​xn=1+x+x2+⋯
Valid for
−1<x<1-1<x<1−1<x<1
Function
ln⁡(1+x)\ln(1+x)ln(1+x)
Series
∑n=1∞(−1)n+1xnn=x−x22+⋯\sum_{n=1}^{\infty}\frac{(-1)^{n+1}x^n}{n}=x-\frac{x^2}{2}+\cdots∑n=1∞​n(−1)n+1xn​=x−2x2​+⋯
Valid for
−1<x≤1-1<x\le1−1<x≤1

The first three equal their functions for every real xxx. The last two work only on a limited interval. The series for ln⁡(1+x)\ln(1+x)ln(1+x) also holds at x=1x=1x=1, where it gives ln⁡2\ln 2ln2.

Exam tip

Sine is an odd function, so its series has only odd powers. Cosine is even, so its series has only even powers. Use this to check your memory.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the Maclaurin series for exe^xex.
Show answer and explanation

Answer: A · Worked explanation

Every derivative of exe^xex equals 1 at x=0x=0x=0, so each coefficient is 1n!\frac{1}{n!}n!1​. The series ∑xn\sum x^n∑xn is the geometric series for 11−x\frac{1}{1-x}1−x1​, with no factorials. The alternating version would be the series for e−xe^{-x}e−x, because its signs alternate. Only the version with 1n!\frac{1}{n!}n!1​ and all positive terms matches exe^xex at every power.
5

Part 5 of 6: Partial sums match the function best near the center

Cutting a series off gives a polynomial that approximates the function. The graph compares the sine curve with two of its Maclaurin polynomials.

Figure 1. Higher-degree polynomials follow the sine curve farther from the center at x = 0.

Near x=0x=0x=0 the three curves almost coincide. Farther away, the polynomials break from the sine curve. The degree 5 polynomial stays close longer than the degree 3 polynomial.

Staying near the center keeps the error small. This is why a series centered close to the input of interest is more useful than one centered far away.

Adding terms widens the region of good agreement. A series equals its function only where it converges. That region is the interval of convergence.

Part 5 done

6

Part 6 of 6: Recognizing a familiar pattern identifies the function

Sometimes a series is given and the function is unknown. Compare the signs, powers, and factorials with the standard list. A match names the function at once.

Worked example

Summing a numerical series

Find the exact sum of 1−12!+14!−16!+⋯1-\frac{1}{2!}+\frac{1}{4!}-\frac{1}{6!}+\cdots1−2!1​+4!1​−6!1​+⋯.
  1. 1
    The signs alternate and the factorials are even, so the pattern matches ∑n=0∞(−1)nx2n(2n)!\sum_{n=0}^{\infty}\frac{(-1)^n x^{2n}}{(2n)!}∑n=0∞​(2n)!(−1)nx2n​.
  2. 2
    That is the Maclaurin series for cos⁡x\cos xcosx.
  3. 3
    Every power of x=1x=1x=1 equals 1, so the given series is the cosine series evaluated at x=1x=1x=1.

Answer: The sum is cos⁡1≈0.540\cos 1\approx 0.540cos1≈0.540.

Numerical series often hide a function in this way. Decide which standard series the signs and factorials point to. Then decide which value of xxx produces the given terms.

Replacing xxx with another expression keeps the pattern. Replacing xxx with −x2-x^2−x2 in the series for exe^xex gives e−x2=∑n=0∞(−1)nx2nn!e^{-x^2}=\sum_{n=0}^{\infty}\frac{(-1)^n x^{2n}}{n!}e−x2=∑n=0∞​n!(−1)nx2n​. Check the first few terms before you commit to a match.

Go deeperWhy a series might not equal its function

A Taylor series can converge and still fail to equal the function. Take f(x)=e−1/x2f(x)=e^{-1/x^2}f(x)=e−1/x2 for x≠0x\ne0x=0, with f(0)=0f(0)=0f(0)=0. Every derivative of fff at 0 equals 0, so its Maclaurin series is zero everywhere.

The function is not zero away from the origin. So the series matches the function only at x=0x=0x=0. The standard series in the table do not have this problem.

Note read

Check your recall[13 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Represent[2 marks]

    Represent the Taylor series for a function fff centered at x=cx=cx=c using summation notation.

    Show mark schemeHide mark scheme

    Model answer

    ∑n=0∞f(n)(c)n!(x−c)n\sum_{n=0}^{\infty}\frac{f^{(n)}(c)}{n!}(x-c)^n∑n=0∞​n!f(n)(c)​(x−c)n.

    • 1 mark for writing the coefficient as f(n)(c)n!\frac{f^{(n)}(c)}{n!}n!f(n)(c)​
    • 1 mark for writing the factor (x−c)n(x-c)^n(x−c)n with the sum running from n=0n=0n=0 to ∞\infty∞
  2. 2.Determine[3 marks]

    Determine the first three nonzero terms of the Maclaurin series for cos⁡x\cos xcosx.

    Show mark schemeHide mark scheme

    Model answer

    The derivatives of cos⁡x\cos xcosx at 0 are 1,0,−1,0,1,…1, 0, -1, 0, 1,\ldots1,0,−1,0,1,…. Dividing by n!n!n! gives coefficients 1, −12!-\frac{1}{2!}−2!1​, 14!\frac{1}{4!}4!1​. The terms are 1−x22+x4241-\frac{x^2}{2}+\frac{x^4}{24}1−2x2​+24x4​.

    • 1 mark for finding the derivative values 1,0,−1,0,11, 0, -1, 0, 11,0,−1,0,1 at x=0x=0x=0
    • 1 mark for dividing by the correct factorials
    • 1 mark for giving 1−x22+x4241-\frac{x^2}{2}+\frac{x^4}{24}1−2x2​+24x4​
  3. 3.Explain[2 marks]

    Explain why the Maclaurin series for sin⁡x\sin xsinx contains only odd powers of xxx.

    Show mark schemeHide mark scheme

    Model answer

    The even-order derivatives of sin⁡x\sin xsinx are ±sin⁡x\pm\sin x±sinx, and sin⁡0=0\sin 0=0sin0=0. So every coefficient of an even power is zero, leaving only odd powers.

    • 1 mark for stating that even-order derivatives are ±sin⁡x\pm\sin x±sinx, which equal 0 at x=0x=0x=0
    • 1 mark for concluding that coefficients of even powers are zero
  4. 4.Find[2 marks]

    Find the exact sum of ∑n=0∞1n!\sum_{n=0}^{\infty}\frac{1}{n!}∑n=0∞​n!1​.

    Show mark schemeHide mark scheme

    Model answer

    The series is the Maclaurin series for exe^xex evaluated at x=1x=1x=1. Its sum is eee.

    • 1 mark for recognizing the Maclaurin series for exe^xex with x=1x=1x=1
    • 1 mark for giving the sum as eee
  5. 5.Determine[2 marks]

    Determine the coefficient of (x−2)3(x-2)^3(x−2)3 in the Taylor series for fff centered at x=2x=2x=2, given f′′′(2)=−18f'''(2)=-18f′′′(2)=−18.

    Show mark schemeHide mark scheme

    Model answer

    The coefficient is f′′′(2)3!=−186=−3\frac{f'''(2)}{3!}=\frac{-18}{6}=-33!f′′′(2)​=6−18​=−3.

    • 1 mark for using the coefficient f′′′(2)3!\frac{f'''(2)}{3!}3!f′′′(2)​
    • 1 mark for obtaining -3
  6. 6.Explain[2 marks]

    Explain why the series ∑n=0∞xn\sum_{n=0}^{\infty}x^n∑n=0∞​xn cannot be used to evaluate 11−x\frac{1}{1-x}1−x1​ at x=2x=2x=2.

    Show mark schemeHide mark scheme

    Model answer

    The series equals 11−x\frac{1}{1-x}1−x1​ only for −1<x<1-1<x<1−1<x<1. Since x=2x=2x=2 lies outside that interval, the series diverges there, while the function equals -1.

    • 1 mark for stating that the series equals the function only for −1<x<1-1<x<1−1<x<1
    • 1 mark for noting that x=2x=2x=2 is outside this interval, so the series does not represent the function

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

Which expression gives the first three nonzero terms of the Maclaurin series for cos⁡x\cos xcosx?
Show answer and explanation

Answer: D · Worked explanation

Cosine is even, so only even powers appear, and the signs alternate because the derivatives cycle through cos⁡x\cos xcosx, −sin⁡x-\sin x−sinx, −cos⁡x-\cos x−cosx, sin⁡x\sin xsinx. The expression with only odd powers is the series for sin⁡x\sin xsinx. Keeping every sign positive ignores the alternation produced by the derivative cycle.
4.

Medium·Determine[1 mark]

Determine the first three terms of the Maclaurin series for e2xe^{2x}e2x.
Show answer and explanation

Answer: B · Worked explanation

Replace xxx by 2x2x2x in 1+x+x22!+⋯1+x+\frac{x^2}{2!}+\cdots1+x+2!x2​+⋯. The third term is (2x)22!=4x22=2x2\frac{(2x)^2}{2!}=\frac{4x^2}{2}=2x^22!(2x)2​=24x2​=2x2. The value 4x24x^24x2 comes from squaring 2x2x2x but forgetting to divide by 2!2!2!. The last expression ignores the factor 2 completely, so it is the series for exe^xex itself. Check each term by substituting 2x2x2x for xxx.
5.

Medium·Determine[1 mark]

Determine the first four terms of the Taylor series for fff centered at x=2x=2x=2, given f(2)=3f(2)=3f(2)=3, f′(2)=4f'(2)=4f′(2)=4, f′′(2)=−10f''(2)=-10f′′(2)=−10, and f′′′(2)=12f'''(2)=12f′′′(2)=12.
Show answer and explanation

Answer: C · Worked explanation

The coefficients are 3, 4, −102!=−5\frac{-10}{2!}=-52!−10​=−5, and 123!=2\frac{12}{3!}=23!12​=2, attached to powers of x−2x-2x−2. Using the raw derivatives -10 and 12 skips the factorials. Dividing 12 by 3 instead of 3!3!3! gives 4, which is wrong because the denominator must be 3!=63!=63!=6.
6.

Medium·Find[1 mark]

Find the exact sum of ∑n=0∞(−1)n(2n+1)!\sum_{n=0}^{\infty}\frac{(-1)^n}{(2n+1)!}∑n=0∞​(2n+1)!(−1)n​.
Show answer and explanation

Answer: A · Worked explanation

The terms 1−13!+15!−⋯1-\frac{1}{3!}+\frac{1}{5!}-\cdots1−3!1​+5!1​−⋯ match the series for sin⁡x\sin xsinx at x=1x=1x=1, since every power of 1 is 1. The value cos⁡1\cos 1cos1 would need even factorials 2n2n2n in the denominators. The sum e−1e^{-1}e−1 would need every integer factorial, not only odd ones.
7.

Medium·Identify[1 mark]

Identify the values of xxx for which ∑n=0∞xn\sum_{n=0}^{\infty}x^n∑n=0∞​xn equals 11−x\frac{1}{1-x}1−x1​.
Show answer and explanation

Answer: D · Worked explanation

The series equals the function only for ∣x∣<1|x|<1∣x∣<1. At x=1x=1x=1 every term is 1, and at x=−1x=-1x=−1 the terms alternate between 1 and -1, so the series diverges at both endpoints. Including the endpoints is the common mistake. Using all real xxx confuses this series with the one for exe^xex.
8.

Hard·Determine[2 marks]

Determine the coefficient of (x−1)3(x-1)^3(x−1)3 in the Taylor series for f(x)=1xf(x)=\frac{1}{x}f(x)=x1​ centered at x=1x=1x=1.
Show answer and explanation

Answer: B · Worked explanation

Here f′′′(x)=−6x−4f'''(x)=-6x^{-4}f′′′(x)=−6x−4, so f′′′(1)=−6f'''(1)=-6f′′′(1)=−6. The coefficient is −63!=−1\frac{-6}{3!}=-13!−6​=−1. The value -6 is the derivative itself and has not been divided by 3!3!3!. Dividing by 3 instead of 3!3!3! gives -2. The value 1 misses the sign, which alternates for this function.
9.

Hard·Determine[2 marks]

Determine the coefficient of (x−π)3(x-\pi)^3(x−π)3 in the Taylor series for sin⁡x\sin xsinx centered at x=πx=\pix=π.
Show answer and explanation

Answer: C · Worked explanation

The third derivative is −cos⁡x-\cos x−cosx, and −cos⁡π=1-\cos\pi=1−cosπ=1. The coefficient is 13!=16\frac{1}{3!}=\frac{1}{6}3!1​=61​. The value −16-\frac{1}{6}−61​ is the coefficient at center 0, where −cos⁡0=−1-\cos 0=-1−cos0=−1. The value 0 wrongly assumes every derivative vanishes because sin⁡π=0\sin\pi=0sinπ=0. The value 1 skips the division by 3!3!3!.
10.

Hard·Determine[2 marks]

Let f(x)=ex2f(x)=e^{x^2}f(x)=ex2. Determine f(6)(0)f^{(6)}(0)f(6)(0) using the Maclaurin series for exe^xex.
Show answer and explanation

Answer: D · Worked explanation

Replace xxx by x2x^2x2 in the series for exe^xex. The x6x^6x6 term comes from (x2)33!=x66\frac{(x^2)^3}{3!}=\frac{x^6}{6}3!(x2)3​=6x6​. The coefficient is f(6)(0)6!=16\frac{f^{(6)}(0)}{6!}=\frac{1}{6}6!f(6)(0)​=61​, so f(6)(0)=7206=120f^{(6)}(0)=\frac{720}{6}=120f(6)(0)=6720​=120. The value 16\frac{1}{6}61​ is the coefficient, not the derivative. The value 720 forgets the factor 13!\frac{1}{3!}3!1​, so it is just 6!6!6!. The value 6 is not tied to any step of the calculation.

Keep going

Next topic10.15 Representing functions as power seriesPrevious topic10.13 Radius and interval of convergence

More in Unit 10 · Infinite Sequences and Series

  1. 10.7Alternating series testNotes · 10 questions· BC only
  2. 10.8Ratio testNotes · 10 questions· BC only
  3. 10.9Absolute and conditional convergenceNotes · 10 questions· BC only
  4. 10.10Alternating series error boundNotes · 10 questions· BC only
  5. 10.11Taylor polynomial approximationsNotes · 10 questions· BC only
  6. 10.12Lagrange error boundNotes · 10 questions· BC only
  7. 10.13Radius and interval of convergenceNotes · 10 questions· BC only
  8. 10.14Taylor and Maclaurin seriesNotes · 10 questions· BC only
  9. 10.15Representing functions as power seriesNotes · 10 questions· BC only

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/6 read

  1. 1A Taylor series uses every derivative at one point
  2. 2Four steps turn derivatives into a Taylor series
  3. 3A Maclaurin series is a Taylor series centered at zero
  4. 4Five common Maclaurin series are worth memorizing
  5. 5Partial sums match the function best near the center
  6. 6Recognizing a familiar pattern identifies the function
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Sine curve and two Maclaurin polynomials

y-6-4-20246-3-2-10123x
  • sin x
  • Degree 3
  • Degree 5