Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›6 Integration and Accumulation of Change
  4. ›6.5 Behaviour of accumulation functions

AP Calculus BC · Unit 6 · Integration and Accumulation of Change

6.5 Behaviour of accumulation functions

Analyze how an accumulation function changes and sketch its behavior from a rate graph.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4The upper limit controls how much change accumulates
  1. 1The upper limit controls how much change accumulates
  2. 2The rate graph gives the accumulation graph's slope
  3. 3The rate's sign determines the direction of change
  4. 4Changes in the rate reveal how the curve bends
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: The upper limit controls how much change accumulates

An accumulation function adds the signed change from a fixed starting value to a moving endpoint. Write it as A(x)=∫axr(t) dtA(x)=\int_a^x r(t)\,dtA(x)=∫ax​r(t)dt. The number aaa stays fixed, while the upper limit xxx moves. At x=ax=ax=a, no change has accumulated, so A(a)=0A(a)=0A(a)=0.

Moving xxx to the right adds the signed area between the rate graph and the horizontal axis. Area above the axis adds to AAA. Area below the axis subtracts from it. The value of A(x)A(x)A(x) records the total signed change, not just the most recent rate.

Key terms · tap one for its definition

accumulation function

An accumulation function gives the integral of a rate from a fixed starting point to a variable endpoint.

upper limit

The upper limit is the variable endpoint of the interval over which the rate is accumulated.

Part 1 done

2

Part 2 of 4: The rate graph gives the accumulation graph's slope

If the rate function rrr is continuous, then A′(x)=r(x)A'(x)=r(x)A′(x)=r(x). The value of r(x)r(x)r(x) is therefore the derivative, or slope, of the accumulation graph at xxx. A larger positive rate gives a steeper upward slope. A more negative rate gives a steeper downward slope.

To sketch AAA, start at A(a)=0A(a)=0A(a)=0. Use signed areas to locate other values of AAA. Then use rate values to shape the curve between them. Do not copy the rate graph as the accumulation graph. One shows slopes; the other shows the change those slopes produce.

Figure 1. The signed area under the rate graph sets the accumulated value. The rate's height sets the accumulation graph's slope.

Key terms · tap one for its definition

rate function

A rate function gives the instantaneous change in an accumulated quantity per unit of its input.

derivative

A derivative gives a function's instantaneous rate of change, or the slope of its graph.

Part 2 done

Quick check

One question on the part you just read

Easy

For A(x)=∫2xr(t) dtA(x)=\int_2^x r(t)\,dtA(x)=∫2x​r(t)dt, which quantity changes as xxx moves while the starting point remains fixed?
Show answer and explanation

Answer: D · Worked explanation

The variable xxx is the upper limit, so moving it changes the interval over which the rate is accumulated. The lower limit remains fixed at 2. The accumulated value at the starting point is A(2)=0A(2)=0A(2)=0, and changing the endpoint does not by itself change the rate function.
3

Part 3 of 4: The rate's sign determines the direction of change

The accumulation function is increasing wherever r(x)>0r(x)>0r(x)>0. It is decreasing wherever r(x)<0r(x)<0r(x)<0. It stays constant across an interval only when the rate is zero throughout that interval. A single point where r(x)=0r(x)=0r(x)=0 does not make AAA constant.

A stationary point occurs where A′(x)=0A'(x)=0A′(x)=0, provided the derivative exists. If the rate changes from positive to negative there, AAA has a local maximum. A change from negative to positive gives a local minimum. If the rate touches zero without changing sign, AAA keeps moving in the same direction.

Common mistake

A rate below zero does not mean the accumulated value is below zero. It means that value is decreasing.

Key terms · tap one for its definition

increasing

A function is increasing on an interval when its values rise as the input moves right.

decreasing

A function is decreasing on an interval when its values fall as the input moves right.

stationary point

A stationary point is a point where a function's derivative exists and equals zero.

Part 3 done

4

Part 4 of 4: Changes in the rate reveal how the curve bends

When rrr is increasing, the slopes of AAA increase. The graph of AAA bends upward. When rrr is decreasing, those slopes decrease, and AAA bends downward. Where rrr is differentiable, this concavity follows from A′′(x)=r′(x)A''(x)=r'(x)A′′(x)=r′(x). A rate graph can therefore show both the direction and the bending of an accumulation graph.

Worked example

Find an accumulated value and its behavior

Let r(x)=2−xr(x)=2-xr(x)=2−x and A(x)=∫0xr(t) dtA(x)=\int_0^x r(t)\,dtA(x)=∫0x​r(t)dt for 0≤x≤40\leq x\leq40≤x≤4. Find A(3)A(3)A(3) and describe AAA on this interval.
  1. 1
    A(3)=∫03(2−t) dtA(3)=\int_0^3(2-t)\,dtA(3)=∫03​(2−t)dt.
  2. 2
    A(3)=[2t−t22]03=6−92=32A(3)=\left[2t-\frac{t^2}{2}\right]_0^3=6-\frac{9}{2}=\frac{3}{2}A(3)=[2t−2t2​]03​=6−29​=23​.
  3. 3
    r(x)>0r(x)>0r(x)>0 for 0≤x<20\leq x<20≤x<2, and r(x)<0r(x)<0r(x)<0 for 2<x≤42<x\leq42<x≤4.
  4. 4
    rrr decreases throughout, so AAA bends downward throughout.

Answer: A(3)=32A(3)=\frac{3}{2}A(3)=23​ units of accumulated change. AAA increases to x=2x=2x=2, then decreases.

Exam tip

For a graph explanation, state the rate's sign before naming where accumulation increases or decreases.

Key term

concavity

Concavity describes whether a graph's slopes increase or decrease as the input moves right.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[2 marks]

    Explain how moving the upper limit right changes an accumulation function.

    Show mark schemeHide mark scheme

    Model answer

    Moving the upper limit right adds the signed area under the rate graph. Area below the axis subtracts from the accumulated value.

    • 1 mark for stating that moving the upper limit right adds signed area under the rate graph
    • 1 mark for stating that area below the horizontal axis subtracts from the accumulated value
  2. 2.Describe[3 marks]

    Describe where an accumulation function increases, decreases, and stays constant.

    Show mark schemeHide mark scheme

    Model answer

    It increases where the rate is positive and decreases where the rate is negative. It stays constant across intervals where the rate is zero throughout.

    • 1 mark for stating that accumulation increases where the rate is positive
    • 1 mark for stating that accumulation decreases where the rate is negative
    • 1 mark for stating that accumulation stays constant across an interval where the rate is zero throughout
  3. 3.Analyze[3 marks]

    Analyze A(x)=∫0x(2−t) dtA(x)=\int_0^x(2-t)\,dtA(x)=∫0x​(2−t)dt on 0≤x≤40\leq x\leq40≤x≤4. Locate its maximum and describe its concavity.

    Show mark schemeHide mark scheme

    Model answer

    The rate 2−x2-x2−x changes from positive to negative at x=2x=2x=2, so AAA has a maximum there. Since the rate decreases throughout, AAA bends downward throughout.

    • 1 mark for identifying x=2x=2x=2 as the point where the rate changes sign
    • 1 mark for concluding that AAA has a maximum at x=2x=2x=2
    • 1 mark for stating that AAA bends downward because its rate decreases throughout
  4. 4.Calculate[3 marks]

    Calculate A(3)A(3)A(3) if A(x)=∫0x(2−t) dtA(x)=\int_0^x(2-t)\,dtA(x)=∫0x​(2−t)dt.

    Show mark schemeHide mark scheme

    Model answer

    A(3)=∫03(2−t) dt=[2t−t22]03=32A(3)=\int_0^3(2-t)\,dt=\left[2t-\frac{t^2}{2}\right]_0^3=\frac{3}{2}A(3)=∫03​(2−t)dt=[2t−2t2​]03​=23​ units of accumulated change.

    • 1 mark for setting up ∫03(2−t) dt\int_0^3(2-t)\,dt∫03​(2−t)dt
    • 1 mark for finding the antiderivative 2t−t222t-\frac{t^2}{2}2t−2t2​
    • 1 mark for evaluating the result as 32\frac{3}{2}23​ units of accumulated change
  5. 5.Predict[2 marks]

    Predict what happens to accumulation when its rate touches zero but stays positive on both sides.

    Show mark schemeHide mark scheme

    Model answer

    The accumulation graph has a stationary point where the rate is zero. It continues increasing on both sides because the rate stays positive.

    • 1 mark for identifying a stationary point where the rate equals zero
    • 1 mark for stating that accumulation continues increasing because the rate stays positive

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

At the fixed starting point x=ax=ax=a, what is the value of A(x)=∫axr(t) dtA(x)=\int_a^x r(t)\,dtA(x)=∫ax​r(t)dt?
Show answer and explanation

Answer: B · Worked explanation

When x=ax=ax=a, the interval of integration has zero width, so no signed area has accumulated and A(a)=0A(a)=0A(a)=0. The value r(a)r(a)r(a) is the rate at the starting point, not the accumulated value. The integral does not include the rate's entire domain.
3.

Easy·Identify[1 mark]

On an interval where the rate function satisfies r(x)<0r(x)<0r(x)<0 throughout, how does the accumulation function AAA behave?
Show answer and explanation

Answer: D · Worked explanation

Because A′(x)=r(x)A'(x)=r(x)A′(x)=r(x), a negative rate means the slope of AAA is negative, so AAA decreases. This does not determine whether AAA itself is negative: it may still have a positive accumulated value while decreasing. A constant accumulation function requires the rate to be zero throughout the interval.
4.

Easy·Identify[1 mark]

Which rate behavior makes an accumulation function stay constant across an entire interval?
Show answer and explanation

Answer: A · Worked explanation

Since A′(x)=r(x)A'(x)=r(x)A′(x)=r(x), the accumulation function has zero slope throughout an interval only when the rate is zero throughout that interval. A single zero of the rate gives at most a stationary point, not a whole constant interval. An accumulated value of zero does not imply a zero rate.
5.

Medium·Determine[2 marks]

An accumulation function begins at A(1)=4A(1)=4A(1)=4. As its upper limit moves from 1 to 5, the rate is positive from 1 to 3 and negative from 3 to 5. Which statement correctly describes the change in AAA?
Show answer and explanation

Answer: C · Worked explanation

Where the rate is positive, A′(x)>0A'(x)>0A′(x)>0 and the accumulation function increases; where the rate is negative, A′(x)<0A'(x)<0A′(x)<0 and it decreases. Thus it increases up to x=3x=3x=3 and then decreases. A sign change does not make the function constant, and the final value depends on the net signed area.
6.

Medium·Calculate[2 marks]

Let A(x)=∫0xr(t) dtA(x)=\int_0^x r(t)\,dtA(x)=∫0x​r(t)dt. The rate is r(t)=3r(t)=3r(t)=3 for 0≤t<20\leq t<20≤t<2 and r(t)=−1r(t)=-1r(t)=−1 for 2<t≤52<t\leq52<t≤5. Determine A(5)A(5)A(5).
Show answer and explanation

Answer: B · Worked explanation

The signed area from 0 to 2 is 3(2)=63(2)=63(2)=6, and from 2 to 5 it is (−1)(3)=−3(-1)(3)=-3(−1)(3)=−3. Therefore A(5)=6−3=3A(5)=6-3=3A(5)=6−3=3. The tempting value 9 would add the magnitudes of both areas; accumulation uses signed area, so the portion below the axis subtracts.
7.

Medium·Determine[2 marks]

Suppose A(0)=0A(0)=0A(0)=0 and A′(x)=r(x)A'(x)=r(x)A′(x)=r(x). The rate is positive on (0,2)(0,2)(0,2), zero at 2, and negative on (2,4)(2,4)(2,4). What can be concluded about AAA at x=2x=2x=2?
Show answer and explanation

Answer: A · Worked explanation

The rate is the slope of the accumulation function. Since the slope changes from positive to negative at x=2x=2x=2, AAA increases before that point and decreases afterward, giving a local maximum. A local minimum would require a change from negative to positive, and the sign pattern gives no reason for A(2)A(2)A(2) to equal zero.
8.

Medium·Explain[2 marks]

A rate function is increasing throughout an interval, changing from -4 to -1. Describe how the accumulation function behaves in direction and concavity on that interval.
Show answer and explanation

Answer: B · Worked explanation

The rate remains negative, so A′=r<0A'=r<0A′=r<0 and the accumulation function decreases. Because the rate is increasing, the slopes of AAA increase, so AAA bends upward (is concave up). The fact that the rate is negative determines direction, while its increasing trend determines concavity.
9.

Medium·Calculate[2 marks]

Let A(x)=∫0x(t−1) dtA(x)=\int_0^x (t-1)\,dtA(x)=∫0x​(t−1)dt. Determine the slope of the accumulation graph at x=3x=3x=3.
Show answer and explanation

Answer: D · Worked explanation

By the Fundamental Theorem of Calculus, A′(x)=t−1A'(x)=t-1A′(x)=t−1 evaluated at t=xt=xt=x, so A′(3)=3−1=2A'(3)=3-1=2A′(3)=3−1=2. The value of the accumulation function itself is not the slope; integrating from 0 to 3 would give A(3)=32A(3)=\frac{3}{2}A(3)=23​, a different quantity.
10.

Hard·Deduce[2 marks]

For A(x)=∫0xr(t) dtA(x)=\int_0^x r(t)\,dtA(x)=∫0x​r(t)dt, the rate is positive on (0,1)(0,1)(0,1), negative on (1,3)(1,3)(1,3), and positive on (3,5)(3,5)(3,5). The signed area from 0 to 1 is 2, from 1 to 3 is -5, and from 3 to 5 is 4. Which conclusion is correct?
Show answer and explanation

Answer: B · Worked explanation

The rate changes from positive to negative at 1, giving a local maximum, and from negative to positive at 3, giving a local minimum. The accumulated value is the net signed area: A(5)=2+(−5)+4=1A(5)=2+(-5)+4=1A(5)=2+(−5)+4=1. The value -1 results from subtracting the positive areas from the negative area in the wrong direction.

Keep going

Next topic6.6 Properties of definite integralsPrevious topic6.4 FTC and accumulation functions

More in Unit 6 · Integration and Accumulation of Change

  1. 6.1Accumulation of changeNotes · 10 questions
  2. 6.2Riemann sumsNotes · 10 questions
  3. 6.3Summation and definite integral notationNotes · 10 questions
  4. 6.4FTC and accumulation functionsNotes · 10 questions
  5. 6.5Behaviour of accumulation functionsNotes · 10 questions
  6. 6.6Properties of definite integralsNotes · 10 questions
  7. 6.7FTC and definite integralsNotes · 10 questions
  8. 6.8Antiderivatives and indefinite integralsNotes · 10 questions
  9. 6.9Integration by substitutionNotes · 10 questions

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1The upper limit controls how much change accumulates
  2. 2The rate graph gives the accumulation graph's slope
  3. 3The rate's sign determines the direction of change
  4. 4Changes in the rate reveal how the curve bends
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe