Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›1 Atomic Structure and Properties
  4. ›1.6 Photoelectron spectroscopy

AP Chemistry · Unit 1 · Atomic Structure and Properties

1.6 Photoelectron spectroscopy

Interpret photoelectron spectra to find binding energies, assign subshells, and identify elements.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Photoelectron spectroscopy measures how tightly electrons are held
  1. 1Photoelectron spectroscopy measures how tightly electrons are held
  2. 2Peak positions reveal shells and subshells
  3. 3Peak sizes show how many electrons occupy subshells
  4. 4Peak patterns can identify an unknown element
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Photoelectron spectroscopy measures how tightly electrons are held

In photoelectron spectroscopy (PES), photons strike gaseous atoms and remove electrons. An instrument measures the kinetic energy of each emitted electron. The binding energy is the energy needed to remove that electron from the atom. Photon energy equals binding energy plus the electron's kinetic energy. Therefore, electrons with lower measured kinetic energy had higher binding energy. A spectrum displays signals from many electrons, grouped by their binding energies.

Common mistake

A high binding energy does not mean the emitted electron moves faster. With fixed photon energy, it leaves with less kinetic energy.

Worked example

Find an electron's binding energy

A photon has 100 eV of energy. An emitted electron has 92 eV of kinetic energy. Find its binding energy.
  1. 1
    Use photon energy = binding energy + kinetic energy.
  2. 2
    Rearrange: binding energy = photon energy − kinetic energy.
  3. 3
    Calculate: 100 eV−92 eV=8 eV100\,\mathrm{eV}-92\,\mathrm{eV}=8\,\mathrm{eV}100eV−92eV=8eV.

Answer: The binding energy is 8 eV.

Key terms · tap one for its definition

photoelectron spectroscopy (PES)

Photoelectron spectroscopy uses photons to remove electrons and measures their kinetic energies to determine binding energies.

binding energy

Binding energy is the energy required to remove an electron from an atom.

Part 1 done

2

Part 2 of 4: Peak positions reveal shells and subshells

Each PES peak represents electrons with similar binding energies. These electrons usually occupy the same subshell. Inner-shell electrons generally have higher binding energies than outer-shell electrons. They are closer to the nucleus and experience less shielding from other electrons. Within one shell, an sss subshell generally has higher binding energy than a ppp subshell. For example, a magnesium spectrum has peaks for 1s1s1s, 2s2s2s, 2p2p2p, and 3s3s3s. Its 1s1s1s peak has the highest binding energy. Its outer 3s3s3s peak has the lowest.

Exam tip

Check the binding-energy axis before assigning peaks. Some spectra place higher binding energies on the left.

Figure 1. Inner electrons have higher binding energies. The taller peak represents a subshell with more electrons.

Key terms · tap one for its definition

peak

A PES peak is a signal from electrons with similar binding energies.

subshell

A subshell is a group of orbitals within a shell, identified by labels such as sss or ppp.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify what a peak’s position on the binding-energy axis represents in a photoelectron spectrum.
Show answer and explanation

Answer: B · Worked explanation

Peak position indicates the binding energy of the electrons producing that signal: the energy required to remove them from the atom. The kinetic energy is measured for emitted electrons, but it is not what the binding-energy axis displays. With fixed photon energy, higher binding energy corresponds to lower, not higher, kinetic energy.
3

Part 3 of 4: Peak sizes show how many electrons occupy subshells

The relative peak area reflects the number of electrons producing that signal. A subshell containing six electrons gives roughly three times the signal of one containing two. In simplified spectra, peak height often represents this relative signal. Always follow the quantity shown on the vertical axis. Magnesium has relative signals of 2, 2, 6, and 2 across its 1s1s1s, 2s2s2s, 2p2p2p, and 3s3s3s peaks. Their sum is 12 electrons. A partly filled subshell gives a smaller signal than a full subshell of the same type.

Common mistake

Peak position shows binding energy, not electron count. Use the relative signal to count electrons.

Key term

peak area

Peak area is the integrated signal for a PES peak and reflects its relative electron count.

Part 3 done

4

Part 4 of 4: Peak patterns can identify an unknown element

To identify a neutral atom, assign peaks by binding energy and use their relative signals to count electrons. Add the electrons to obtain the atomic number. Then check that the subshell pattern agrees with that element. For example, signals of 2, 2, 6, and 2 suggest 1s2 2s2 2p6 3s21s^2\,2s^2\,2p^6\,3s^21s22s22p63s2. The total is 12 electrons, so the atom is magnesium. A pattern ending in a single 3s3s3s electron instead suggests sodium. One additional 3p3p3p electron after magnesium's pattern suggests aluminum.

Binding energies provide another check. Greater nuclear charge generally holds comparable electrons more tightly, but shielding also matters. Compare peaks from the same subshell when using their positions to distinguish elements. For ions, electron count alone does not give the proton count, so a neutral-atom assumption matters.

Note read

Check your recall[11 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Calculate[2 marks]

    Calculate the binding energy when photon energy is 75 eV and emitted-electron kinetic energy is 63 eV.

    Show mark schemeHide mark scheme

    Model answer

    Binding energy = photon energy − kinetic energy = 75 eV−63 eV=12 eV75\,\mathrm{eV}-63\,\mathrm{eV}=12\,\mathrm{eV}75eV−63eV=12eV.

    • 1 mark for using photon energy minus kinetic energy
    • 1 mark for obtaining 12 eV
  2. 2.Explain[2 marks]

    Explain why an inner-shell peak has higher binding energy than an outer-shell peak.

    Show mark schemeHide mark scheme

    Model answer

    Inner-shell electrons are closer to the nucleus and experience less shielding. More energy is needed to remove them.

    • 1 mark for stating that inner electrons are closer to the nucleus or less shielded
    • 1 mark for linking this to more energy needed for removal
  3. 3.Interpret[2 marks]

    A spectrum has peaks with relative signals of 2 and 6. Interpret the difference in electron counts.

    Show mark schemeHide mark scheme

    Model answer

    The second peak represents three times as many electrons as the first: six rather than two.

    • 1 mark for linking relative signal to electron count
    • 1 mark for stating that the second peak represents three times as many electrons
  4. 4.Determine[3 marks]

    A neutral atom has peaks assigned to 1s1s1s, 2s2s2s, 2p2p2p, and 3s3s3s, with relative signals of 2, 2, 6, and 1. Determine the element.

    Show mark schemeHide mark scheme

    Model answer

    The atom has 2+2+6+1=112+2+6+1=112+2+6+1=11 electrons. Its atomic number is 11, so it is sodium.

    • 1 mark for adding the relative signals to get 11 electrons
    • 1 mark for equating 11 electrons in a neutral atom with atomic number 11
    • 1 mark for identifying sodium
  5. 5.Explain[2 marks]

    Explain what peak position and peak area each tell you in a PES.

    Show mark schemeHide mark scheme

    Model answer

    Peak position gives electron binding energy. Peak area reflects the relative number of electrons producing the peak.

    • 1 mark for linking peak position to binding energy
    • 1 mark for linking peak area to relative electron count

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

For electrons in the same principal shell, identify which subshell generally has the higher binding energy.
Show answer and explanation

Answer: B · Worked explanation

Within the same shell, an sss subshell generally has a higher binding energy than a ppp subshell. This means its electrons are more tightly held and require more energy to remove. The number of electrons affects the relative peak signal, not the general binding-energy ordering of these subshells.
3.

Easy·State[1 mark]

State what a PES peak with a relative signal of 6 represents compared with a peak with a relative signal of 2.
Show answer and explanation

Answer: C · Worked explanation

Relative peak signal reflects the number of electrons contributing to that peak. A signal of 6 is three times a signal of 2, so it represents about three times as many electrons. Signal size does not indicate binding energy or emitted-electron speed; those are distinct properties.
4.

Easy·Identify[1 mark]

A neutral atom has PES peaks assigned to 1s1s1s, 2s2s2s, 2p2p2p, and 3s3s3s, with relative signals of 2, 2, 6, and 2. Identify the element.
Show answer and explanation

Answer: D · Worked explanation

The signals add to 2+2+6+2=122+2+6+2=122+2+6+2=12 electrons. A neutral atom with 12 electrons has atomic number 12, and the listed subshell pattern is 1s2 2s2 2p6 3s21s^2\,2s^2\,2p^6\,3s^21s22s22p63s2, which identifies magnesium. Sodium has 11 electrons and would have one electron in 3s3s3s, while aluminum has 13.
5.

Medium·Calculate[2 marks]

A PES instrument uses photons with an energy of 120 eV120\,\text{eV}120eV. An emitted electron has a kinetic energy of 87 eV87\,\text{eV}87eV. Calculate the electron’s binding energy.
Show answer and explanation

Answer: C · Worked explanation

Photon energy equals binding energy plus kinetic energy, so binding energy is 120 eV−87 eV=33 eV120\,\text{eV}-87\,\text{eV}=33\,\text{eV}120eV−87eV=33eV. The tempting value 87 eV87\,\text{eV}87eV is the electron’s measured kinetic energy, not its binding energy. Adding the two energies would incorrectly treat kinetic energy as an additional photon contribution.
6.

Medium·Determine[2 marks]

A spectrum has four peaks ordered from highest to lowest binding energy. Their relative signals are 2, 2, 6, and 2. Which sequence of subshell assignments best matches the peaks?
Show answer and explanation

Answer: D · Worked explanation

Inner-shell electrons have higher binding energies, placing 1s1s1s before the n=2n=2n=2 subshells and the outer 3s3s3s subshell last. Within the second shell, 2s2s2s generally has higher binding energy than 2p2p2p. The signal sizes also fit these assignments: the 2p2p2p subshell contains six electrons, whereas each of the other listed subshells contains two.
7.

Medium·Determine[2 marks]

A neutral atom’s peaks are assigned, in order of decreasing binding energy, to 1s1s1s, 2s2s2s, 2p2p2p, 3s3s3s, and 3p3p3p. Their relative signals are 2, 2, 6, 2, and 1. Determine the element.
Show answer and explanation

Answer: A · Worked explanation

The total electron count is 2+2+6+2+1=132+2+6+2+1=132+2+6+2+1=13. Because the atom is neutral, it has 13 protons and therefore atomic number 13, which is aluminum. Magnesium has 12 electrons and no 3p3p3p electron, while silicon has 14 and would have two electrons in 3p3p3p.
8.

Medium·Deduce[2 marks]

Two electrons are emitted after absorbing photons of the same energy. Electron X has kinetic energy 18 eV18\,\text{eV}18eV, while electron Y has kinetic energy 31 eV31\,\text{eV}31eV. Deduce which electron had the greater binding energy.
Show answer and explanation

Answer: A · Worked explanation

For each electron, binding energy equals photon energy minus kinetic energy. Since both absorbed photons of equal energy, the electron with the lower kinetic energy must have the higher binding energy; that is electron X. Greater emitted-electron kinetic energy does not mean greater binding energy, because the two energies sum to the fixed photon energy.
9.

Medium·Interpret[2 marks]

A simplified spectrum shows two peaks assigned to the same type of subshell. The first has a relative signal of 4 and the second has a relative signal of 2. Interpret the signals.
Show answer and explanation

Answer: C · Worked explanation

Relative signal indicates the relative number of electrons producing a peak. A signal of 4 is twice a signal of 2, so the first peak represents about twice as many electrons as the second. Because the subshell type is specified as the same, the comparison is about electron count, not a twofold difference in binding energy.
10.

Hard·Determine[2 marks]

An unknown neutral atom has peaks assigned to 1s1s1s, 2s2s2s, 2p2p2p, and 3s3s3s, with relative signals of 2, 2, 6, and 1. Determine the atom.
Show answer and explanation

Answer: D · Worked explanation

The signals total 2+2+6+1=112+2+6+1=112+2+6+1=11 electrons. A neutral atom with 11 electrons has atomic number 11 and is sodium. Its subshell pattern ends in 3s13s^13s1.

Keep going

Next topic1.7 Periodic trendsPrevious topic1.5 Atomic structure and electron configuration

More in Unit 1 · Atomic Structure and Properties

  1. 1.1Moles and molar massNotes · 10 questions
  2. 1.2Mass spectroscopy of elementsNotes · 10 questions
  3. 1.3Elemental composition of pure substancesNotes · 10 questions
  4. 1.4Composition of mixturesNotes · 10 questions
  5. 1.5Atomic structure and electron configurationNotes · 10 questions
  6. 1.6Photoelectron spectroscopyNotes · 10 questions
  7. 1.7Periodic trendsNotes · 10 questions
  8. 1.8Valence electrons and ionic compoundsNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Photoelectron spectroscopy measures how tightly electrons are held
  2. 2Peak positions reveal shells and subshells
  3. 3Peak sizes show how many electrons occupy subshells
  4. 4Peak patterns can identify an unknown element
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe