Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›2 Compound Structure and Properties
  4. ›2.2 Intramolecular force and potential energy

AP Chemistry · Unit 2 · Compound Structure and Properties

2.2 Intramolecular force and potential energy

Explain bond formation using potential energy, and interpret how bond length relates to bond strength.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Attraction lowers potential energy as atoms approach
  1. 1Attraction lowers potential energy as atoms approach
  2. 2A bond forms at the lowest potential energy
  3. 3The depth of the energy minimum shows bond strength
  4. 4Read both distance and energy from a bond diagram
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Attraction lowers potential energy as atoms approach

An intramolecular force acts between atoms within a substance. As two atoms approach, each nucleus attracts the other atom’s electrons. This attraction lowers their potential energy. Energy is released when the atoms move from a higher-energy arrangement to a stable bond. At very large separations, their interaction becomes negligible. Chemists often assign that separated arrangement a potential energy of zero.

Attraction is not the only interaction. The nuclei repel each other, and the electrons repel each other. These repulsions become especially important at short distances. Bond formation depends on the balance of attraction and repulsion, not attraction alone.

Key terms · tap one for its definition

intramolecular force

An intramolecular force is an interaction that holds atoms together within a substance.

potential energy

Potential energy is energy associated with the relative positions of interacting particles.

Part 1 done

2

Part 2 of 4: A bond forms at the lowest potential energy

A potential energy diagram plots energy against the distance between two nuclei. Moving inward from a large separation, the curve falls as attraction dominates. It reaches a minimum at the equilibrium bond length. There, the atoms have their most stable separation. If they move closer, repulsion dominates and the curve rises steeply.

The minimum does not mean the atoms stop moving. Bonded atoms can vibrate around the equilibrium separation. The curve describes how their potential energy changes with distance. Its lowest point identifies the preferred bond length.

Figure 1. The curve falls as attraction dominates, then rises sharply at short distances. Its minimum marks the equilibrium separation.

Common mistake

A bond does not form when potential energy rises. Its formation releases energy as potential energy falls.

Key terms · tap one for its definition

potential energy diagram

A potential energy diagram shows how the potential energy of interacting atoms varies with their separation.

equilibrium bond length

Equilibrium bond length is the separation at which bonded atoms have minimum potential energy.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the energy change that accompanies two atoms moving from a widely separated arrangement into a stable bond.
Show answer and explanation

Answer: D · Worked explanation

As the atoms approach a stable bonded arrangement, their potential energy falls from the value associated with widely separated atoms. The decrease in potential energy is accompanied by energy being released. An increase in potential energy would describe movement away from the stable arrangement, not bond formation.
3

Part 3 of 4: The depth of the energy minimum shows bond strength

Bond dissociation energy is the energy required to break a gaseous bond and separate its atoms. On a diagram with separated atoms at zero energy, it is the vertical distance from the minimum to zero. A deeper minimum therefore indicates a stronger bond. Bond formation releases energy; breaking that bond requires energy.

A stronger bond often has a shorter equilibrium length when comparing bonds between the same atoms. Greater electron sharing can strengthen attraction and draw the nuclei closer. Across different atom pairs, atomic size also affects length. Do not use length alone to rank every bond’s strength.

Exam tip

When comparing curves, identify their minima separately. Compare horizontal positions for bond lengths and vertical depths for bond strengths.

Key terms · tap one for its definition

bond dissociation energy

Bond dissociation energy is the energy required to break one mole of specified bonds in gaseous species.

stronger bond

A stronger bond requires more energy to break than a weaker bond under the same conditions.

Part 3 done

4

Part 4 of 4: Read both distance and energy from a bond diagram

Start with the axes before interpreting a curve. The horizontal coordinate of its minimum gives bond length. Its vertical position gives the bonded pair’s potential energy relative to the chosen zero. The rise from the minimum to the separated-atoms level gives the energy needed to break the bond.

Worked example

Reading a potential energy curve

A curve reaches its minimum at 100 pm and −400 kJ mol−1-400\,\mathrm{kJ\,mol^{-1}}−400kJmol−1. Separated atoms are at 0 kJ mol−10\,\mathrm{kJ\,mol^{-1}}0kJmol−1. Find the equilibrium bond length and bond dissociation energy.
  1. 1
    Read the minimum’s horizontal coordinate: 100 pm.
  2. 2
    Find the energy rise to separated atoms: 0−(−400)=400 kJ mol−10-(-400)=400\,\mathrm{kJ\,mol^{-1}}0−(−400)=400kJmol−1.

Answer: The equilibrium bond length is 100 pm. The bond dissociation energy is 400 kJ mol−1400\,\mathrm{kJ\,mol^{-1}}400kJmol−1.

A positive bond dissociation energy represents energy supplied to separate atoms. The negative energy at the minimum instead describes the bonded state relative to separated atoms. Keeping those meanings distinct prevents a sign error.

Key term

bond length

Bond length is the distance between the nuclei of two bonded atoms at equilibrium.

Note read

Check your recall[10 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain why potential energy first falls and then rises as two atoms move closer.

    Show mark schemeHide mark scheme

    Model answer

    Attraction between each nucleus and the other atom’s electrons lowers potential energy. At short distances, repulsions between nuclei and between electrons become dominant. Potential energy then rises.

    • 1 mark for identifying attraction between nuclei and electrons of the other atom
    • 1 mark for stating that this attraction lowers potential energy
    • 1 mark for explaining that repulsions dominate at short distances and raise potential energy
  2. 2.Identify[1 mark]

    Identify the point on a potential energy curve that gives equilibrium bond length.

    Show mark schemeHide mark scheme

    Model answer

    The equilibrium bond length is the horizontal coordinate of the curve’s minimum.

    • 1 mark for identifying the horizontal coordinate of the minimum
  3. 3.Compare[2 marks]

    Compare two curves with minima at the same separation but different depths.

    Show mark schemeHide mark scheme

    Model answer

    The bonds have the same equilibrium length. The bond with the deeper minimum has the greater bond dissociation energy and is stronger.

    • 1 mark for stating that the equilibrium bond lengths are equal
    • 1 mark for stating that the deeper minimum represents a stronger bond
  4. 4.Calculate[2 marks]

    Calculate the bond dissociation energy when a curve’s minimum is −250 kJ mol−1-250\,\mathrm{kJ\,mol^{-1}}−250kJmol−1 and separated atoms are at zero.

    Show mark schemeHide mark scheme

    Model answer

    The energy required is 0−(−250)=250 kJ mol−10-(-250)=250\,\mathrm{kJ\,mol^{-1}}0−(−250)=250kJmol−1.

    • 1 mark for finding the difference between zero and the minimum
    • 1 mark for giving 250 kJ mol−1250\,\mathrm{kJ\,mol^{-1}}250kJmol−1 as a positive energy
  5. 5.Explain[2 marks]

    Explain why a shorter bond is not always stronger than a longer bond.

    Show mark schemeHide mark scheme

    Model answer

    Bond length also depends on atomic size. Across different atom pairs, length alone does not determine bond dissociation energy.

    • 1 mark for stating that atomic size affects bond length
    • 1 mark for stating that length alone cannot establish strength across different atom pairs

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State the usual relationship between bond length and bond strength when comparing bonds between the same atoms.
Show answer and explanation

Answer: D · Worked explanation

For bonds between the same atoms, a stronger bond often has a shorter equilibrium length because stronger attraction draws the nuclei closer together. This is a useful comparison for the same atom pair, not a universal rule for all bonds. The claim that a stronger bond is always longer reverses the usual relationship.
3.

Easy·Identify[1 mark]

Identify what the horizontal coordinate of a potential energy curve’s minimum represents.
Show answer and explanation

Answer: C · Worked explanation

The minimum marks the separation at which the bonded atoms have their lowest potential energy, so its horizontal coordinate is the equilibrium bond length. The vertical difference between this minimum and the separated-atoms level is related to bond dissociation energy. The minimum does not indicate that repulsion is absent at every other distance.
4.

Easy·State[1 mark]

State why the potential energy rises sharply if two bonded atoms are pushed closer than their equilibrium separation.
Show answer and explanation

Answer: C · Worked explanation

At distances shorter than the equilibrium separation, repulsions between the positively charged nuclei and between electrons become dominant. These repulsions make the potential energy rise steeply. Attraction does not disappear completely, but it no longer outweighs the short-distance repulsive interactions.
5.

Medium·Compare[2 marks]

Two potential energy curves describe bonds between the same type of atoms. Curve P has its minimum at 120 pm and −300 kJ mol−1-300\,\mathrm{kJ\,mol^{-1}}−300kJmol−1; curve Q has its minimum at 135 pm and −300 kJ mol−1-300\,\mathrm{kJ\,mol^{-1}}−300kJmol−1. Compare the bonds.
Show answer and explanation

Answer: A · Worked explanation

The horizontal positions of the minima give the equilibrium lengths, so P is shorter at 120 pm than Q at 135 pm. Both minima are equally deep relative to zero, so the curves indicate equal bond dissociation energies and equal strengths. A shorter bond does not imply greater strength when the curves have the same depth.
6.

Medium·Calculate[2 marks]

A potential energy curve has a minimum at −360 kJ mol−1-360\,\mathrm{kJ\,mol^{-1}}−360kJmol−1, while the separated atoms are assigned 0 kJ mol−10\,\mathrm{kJ\,mol^{-1}}0kJmol−1. Calculate the bond dissociation energy represented by the curve.
Show answer and explanation

Answer: B · Worked explanation

The energy required to reach separated atoms is the rise from the minimum to zero: 0−(−360)=360 kJ mol−10-(-360)=360\,\mathrm{kJ\,mol^{-1}}0−(−360)=360kJmol−1. Bond dissociation energy is therefore positive because energy must be supplied to break the bond. The value −360 kJ mol−1-360\,\mathrm{kJ\,mol^{-1}}−360kJmol−1 describes the bonded state relative to separated atoms, not the energy required to dissociate it.
7.

Medium·Deduce[2 marks]

A pair of atoms has potential energy 0 kJ mol−10\,\mathrm{kJ\,mol^{-1}}0kJmol−1 when widely separated and −180 kJ mol−1-180\,\mathrm{kJ\,mol^{-1}}−180kJmol−1 at a stable separation. Deduce the energy change when the atoms move from the separated arrangement to the stable one.
Show answer and explanation

Answer: D · Worked explanation

The change in potential energy is final minus initial: −180−0=−180 kJ mol−1-180-0=-180\,\mathrm{kJ\,mol^{-1}}−180−0=−180kJmol−1. Thus potential energy decreases by 180 kJ mol−1180\,\mathrm{kJ\,mol^{-1}}180kJmol−1, and that energy is released as the bond forms. The zero value is a reference for the separated atoms; it does not mean that the bonded state has the same energy.
8.

Medium·Determine[2 marks]

Curve R has a minimum at 110 pm and −250 kJ mol−1-250\,\mathrm{kJ\,mol^{-1}}−250kJmol−1. Curve S has a minimum at 125 pm and −410 kJ mol−1-410\,\mathrm{kJ\,mol^{-1}}−410kJmol−1. Determine which bond is shorter and which bond is stronger.
Show answer and explanation

Answer: A · Worked explanation

The minimum of R is at the smaller horizontal coordinate, 110 pm, so R has the shorter equilibrium bond length. S has the deeper minimum, and its larger energy difference from zero means more energy is needed to separate its atoms, so S is stronger. Confusing horizontal position with depth would incorrectly identify which bond is shorter or stronger.
9.

Medium·Interpret[2 marks]

A potential energy curve reaches its minimum at 145 pm. At 160 pm, its potential energy is higher than at the minimum but still below zero. Interpret the curve at 160 pm.
Show answer and explanation

Answer: D · Worked explanation

At 160 pm the atoms are farther apart than the 145 pm equilibrium separation, and the stated energy is above the curve’s minimum. Because the energy remains below zero, the pair is still at a lower potential energy than the separated-atoms reference. Being below zero does not mean the atoms are fully separated.
10.

Hard·Evaluate[2 marks]

A student compares a bond between small atoms with a bond between larger atoms. The first bond is shorter, but the second has a deeper potential energy minimum relative to zero. Evaluate the claim that the shorter bond must be stronger.
Show answer and explanation

Answer: A · Worked explanation

A deeper minimum relative to the separated-atoms level means more energy is needed to break the bond, so the second bond is stronger according to the given curves. The shorter length of the first bond does not override that evidence, especially because the atoms differ in size. Bond length alone cannot rank strength across different atom pairs.

Keep going

Next topic2.3 Structure of ionic solidsPrevious topic2.1 Types of chemical bonds

More in Unit 2 · Compound Structure and Properties

  1. 2.1Types of chemical bondsNotes · 10 questions
  2. 2.2Intramolecular force and potential energyNotes · 10 questions
  3. 2.3Structure of ionic solidsNotes · 10 questions
  4. 2.4Structure of metals and alloysNotes · 10 questions
  5. 2.5Lewis diagramsNotes · 10 questions
  6. 2.6Resonance and formal chargeNotes · 10 questions
  7. 2.7VSEPR and bond hybridizationNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Attraction lowers potential energy as atoms approach
  2. 2A bond forms at the lowest potential energy
  3. 3The depth of the energy minimum shows bond strength
  4. 4Read both distance and energy from a bond diagram
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe