Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›4 Chemical Reactions
  4. ›4.5 Stoichiometry

AP Chemistry · Unit 4 · Chemical Reactions

4.5 Stoichiometry

Use balanced equations to calculate amounts, identify limiting reactants, and determine percent yield.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Balanced equations give the mole ratios for reactions
  1. 1Balanced equations give the mole ratios for reactions
  2. 2Convert measured amounts to moles before using ratios
  3. 3The limiting reactant sets the maximum product amount
  4. 4Percent yield compares collected product with possible product
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Balanced equations give the mole ratios for reactions

A balanced equation gives the relative amounts of substances that react and form. Its coefficients define mole ratios, not ratios of masses. For example, N2+3H2→2NH3\mathrm{N_2+3H_2\rightarrow 2NH_3}N2​+3H2​→2NH3​ shows that one mole of nitrogen reacts with three moles of hydrogen. It produces two moles of ammonia. Use the ratio connecting the substance you know to the substance you need.

Worked example

Find moles of product

How much ammonia forms from 0.750 mol nitrogen when hydrogen is in excess?
  1. 1
    Read the ratio: 2 mol NH31 mol N2\frac{2\ \mathrm{mol\ NH_3}}{1\ \mathrm{mol\ N_2}}1 mol N2​2 mol NH3​​.
  2. 2
    Calculate: 0.750 mol N2×2 mol NH31 mol N2=1.50 mol NH30.750\ \mathrm{mol\ N_2}\times\frac{2\ \mathrm{mol\ NH_3}}{1\ \mathrm{mol\ N_2}}=1.50\ \mathrm{mol\ NH_3}0.750 mol N2​×1 mol N2​2 mol NH3​​=1.50 mol NH3​.

Answer: 1.50 mol ammonia

Key terms · tap one for its definition

balanced equation

A balanced equation has equal numbers of each element’s atoms on both sides of the reaction arrow.

mole ratios

Mole ratios compare substance amounts using coefficients from a balanced equation.

Part 1 done

2

Part 2 of 4: Convert measured amounts to moles before using ratios

Stoichiometric ratios connect moles, so convert other measurements before applying them. Divide a substance’s mass by its molar mass to find moles. For a solution, multiply its molarity by its volume in liters. Then use the balanced equation to find moles of the required substance. Convert those moles into the requested unit last. Keep substance names or formulas beside each amount. They help you check that the ratio cancels the correct substance.

  • Convert the given amount to moles.
  • Apply the coefficient ratio in the required direction.
  • Convert the resulting moles to the requested unit.

Common mistake

Do not apply coefficients directly to masses. Equal numbers of moles can have different masses.

Key terms · tap one for its definition

molar mass

Molar mass is the mass of one mole of a substance.

molarity

Molarity is the amount of dissolved solute in moles per liter of solution.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the mole ratio of carbon monoxide to carbon dioxide in the balanced equation 2CO+O2→2CO22\mathrm{CO}+\mathrm{O_2}\rightarrow2\mathrm{CO_2}2CO+O2​→2CO2​.
Show answer and explanation

Answer: D · Worked explanation

The coefficients for carbon monoxide and carbon dioxide are both 2, so their mole ratio is 2:22:22:2, which simplifies to 1:11:11:1. Coefficients describe relative amounts in moles, not relative masses; comparing the substances’ masses would not give the coefficient ratio.
3

Part 3 of 4: The limiting reactant sets the maximum product amount

When both reactant amounts are known, one may run out first. That substance is the limiting reactant. The other is an excess reactant and remains after the limiting reactant is consumed. To identify the limit, calculate how much product each reactant could make independently. The smaller product amount sets the maximum possible yield. Do not compare the starting mole amounts alone. The reactants may be needed in different proportions.

Worked example

Identify the limiting reactant

React 2.00 mol nitrogen with 3.00 mol hydrogen. How much ammonia can form?
  1. 1
    From nitrogen: 2.00×21=4.00 mol NH32.00\times\frac{2}{1}=4.00\ \mathrm{mol\ NH_3}2.00×12​=4.00 mol NH3​.
  2. 2
    From hydrogen: 3.00×23=2.00 mol NH33.00\times\frac{2}{3}=2.00\ \mathrm{mol\ NH_3}3.00×32​=2.00 mol NH3​.
  3. 3
    Choose the smaller result. Hydrogen is limiting.

Answer: 2.00 mol ammonia can form.

Figure 1. Three hydrogen molecules can react with only one of the two nitrogen molecules. The remaining nitrogen molecule is in excess.

Key terms · tap one for its definition

limiting reactant

The limiting reactant is consumed first and determines the maximum amount of product.

excess reactant

An excess reactant remains after the limiting reactant is consumed.

Part 3 done

4

Part 4 of 4: Percent yield compares collected product with possible product

The theoretical yield is the maximum product calculated from the limiting reactant. The actual yield is the product collected in an experiment. Calculate percent yield as actual yieldtheoretical yield×100%\frac{\text{actual yield}}{\text{theoretical yield}}\times100\%theoretical yieldactual yield​×100%. Both yields must refer to the same product and use matching units. An actual yield below the theoretical yield can result from incomplete reaction or product lost during collection. A result above 100% suggests a measurement problem or collected material containing impurities.

Worked example

Calculate percent yield

The reaction in the previous example has a theoretical yield of 34.0 g ammonia. An experiment collects 27.2 g. Find the percent yield.
  1. 1
    Set up the ratio: 27.2 g34.0 g×100%\frac{27.2\ \mathrm{g}}{34.0\ \mathrm{g}}\times100\%34.0 g27.2 g​×100%.
  2. 2
    Calculate: 0.800×100%=80.0%0.800\times100\%=80.0\%0.800×100%=80.0%.

Answer: The percent yield is 80.0%.

Exam tip

If both reactants are given, identify the limiting reactant before calculating theoretical yield.

Key terms · tap one for its definition

theoretical yield

Theoretical yield is the maximum product amount calculated from the limiting reactant.

actual yield

Actual yield is the amount of product collected in an experiment.

percent yield

Percent yield is the actual yield divided by the theoretical yield, multiplied by 100%.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State what the coefficients in a balanced equation tell you about reacting substances.

    Show mark schemeHide mark scheme

    Model answer

    They give the mole ratios of the substances.

    • 1 mark for stating that coefficients give mole ratios
  2. 2.Calculate[2 marks]

    Calculate the moles of ammonia formed from 1.20 mol nitrogen when hydrogen is in excess.

    Show mark schemeHide mark scheme

    Model answer

    The nitrogen-to-ammonia ratio is 1:2, so 1.20×2=2.40 mol NH31.20\times2=2.40\ \mathrm{mol\ NH_3}1.20×2=2.40 mol NH3​.

    • 1 mark for using the nitrogen-to-ammonia mole ratio of 1:2
    • 1 mark for calculating 2.40 mol ammonia
  3. 3.Describe[3 marks]

    Describe how to find product mass from a given reactant mass.

    Show mark schemeHide mark scheme

    Model answer

    Divide the reactant mass by its molar mass. Use the balanced equation’s mole ratio to find product moles. Multiply product moles by its molar mass.

    • 1 mark for converting reactant mass to moles using its molar mass
    • 1 mark for using the balanced equation’s mole ratio to find product moles
    • 1 mark for converting product moles to mass using its molar mass
  4. 4.Determine[4 marks]

    Determine the limiting reactant when 1.00 mol nitrogen reacts with 1.50 mol hydrogen. Calculate the moles of ammonia formed.

    Show mark schemeHide mark scheme

    Model answer

    Nitrogen could form 2.00 mol ammonia. Hydrogen could form 1.50×23=1.00 mol1.50\times\frac{2}{3}=1.00\ \mathrm{mol}1.50×32​=1.00 mol ammonia. Hydrogen is limiting, so 1.00 mol ammonia forms.

    • 1 mark for calculating that nitrogen could form 2.00 mol ammonia
    • 1 mark for using the hydrogen-to-ammonia ratio of 3:2
    • 1 mark for calculating that hydrogen could form 1.00 mol ammonia
    • 1 mark for identifying hydrogen as limiting and giving 1.00 mol ammonia as the maximum
  5. 5.Calculate[3 marks]

    Calculate percent yield when the theoretical yield is 25.0 g and the actual yield is 20.0 g.

    Show mark schemeHide mark scheme

    Model answer

    Percent yield is 20.0 g25.0 g×100%=80.0%\frac{20.0\ \mathrm{g}}{25.0\ \mathrm{g}}\times100\%=80.0\%25.0 g20.0 g​×100%=80.0%.

    • 1 mark for placing actual yield over theoretical yield
    • 1 mark for substituting 20.0 g and 25.0 g in the correct positions
    • 1 mark for calculating 80.0%

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Calculate[1 mark]

Calculate the moles of carbon dioxide produced when 0.35 mol0.35\,\text{mol}0.35mol of calcium carbonate decomposes according to CaCO3→CaO+CO2\mathrm{CaCO_3\rightarrow CaO+CO_2}CaCO3​→CaO+CO2​.
Show answer and explanation

Answer: B · Worked explanation

The balanced equation gives a 1:11:11:1 mole ratio between calcium carbonate and carbon dioxide. Thus, 0.35 mol CaCO3×(1 mol CO2/1 mol CaCO3)=0.35 mol CO20.35\,\text{mol CaCO}_3\times(1\,\text{mol CO}_2/1\,\text{mol CaCO}_3)=0.35\,\text{mol CO}_20.35mol CaCO3​×(1mol CO2​/1mol CaCO3​)=0.35mol CO2​. Doubling or tripling the amount would incorrectly use a coefficient ratio that is not in this equation.
3.

Easy·Identify[1 mark]

Identify the limiting reactant in a reaction as it proceeds to completion.
Show answer and explanation

Answer: C · Worked explanation

The limiting reactant is consumed first and therefore determines the maximum amount of product that can form. A reactant that remains is instead in excess. Starting mass alone does not identify the limit because different reactants have different molar masses and may be required in different mole proportions.
4.

Easy·Calculate[1 mark]

A reaction has an actual yield of 18.0 g18.0\,\text{g}18.0g and a theoretical yield of 24.0 g24.0\,\text{g}24.0g. Calculate its percent yield.
Show answer and explanation

Answer: D · Worked explanation

Percent yield is actual yield divided by theoretical yield, multiplied by 100%100\%100%: (18.0 g/24.0 g)×100%=75.0%(18.0\,\text{g}/24.0\,\text{g})\times100\%=75.0\%(18.0g/24.0g)×100%=75.0%. The tempting value of 133%133\%133% comes from reversing the ratio, placing theoretical yield over actual yield.
5.

Medium·Calculate[2 marks]

A sample containing 5.60 g5.60\,\text{g}5.60g of iron reacts with excess oxygen according to 4Fe+3O2→2Fe2O34\mathrm{Fe}+3\mathrm{O_2}\rightarrow2\mathrm{Fe_2O_3}4Fe+3O2​→2Fe2​O3​. Using a molar mass of 55.8 g mol−155.8\,\text{g mol}^{-1}55.8g mol−1 for iron, calculate the moles of iron(III) oxide formed.
Show answer and explanation

Answer: B · Worked explanation

First convert iron mass to moles: 5.60 g/55.8 g mol−1=0.100 mol Fe5.60\,\text{g}/55.8\,\text{g mol}^{-1}=0.100\,\text{mol Fe}5.60g/55.8g mol−1=0.100mol Fe. Then use the 4:24:24:2 ratio: 0.100 mol Fe×(2 mol Fe2O3/4 mol Fe)=0.0502 mol Fe2O30.100\,\text{mol Fe}\times(2\,\text{mol Fe}_2\text{O}_3/4\,\text{mol Fe})=0.0502\,\text{mol Fe}_2\text{O}_30.100mol Fe×(2mol Fe2​O3​/4mol Fe)=0.0502mol Fe2​O3​. The 0.100 mol0.100\,\text{mol}0.100mol option fails to apply the equation’s mole ratio.
6.

Medium·Determine[2 marks]

A student combines 40.0 mL40.0\,\text{mL}40.0mL of 0.250 mol L−10.250\,\text{mol L}^{-1}0.250mol L−1 silver nitrate with excess sodium chloride. The reaction is AgNO3+NaCl→AgCl+NaNO3\mathrm{AgNO_3+NaCl\rightarrow AgCl+NaNO_3}AgNO3​+NaCl→AgCl+NaNO3​. Determine the amount of silver chloride produced.
Show answer and explanation

Answer: C · Worked explanation

Convert the solution volume to liters and calculate silver nitrate moles: 0.250 mol L−1×0.0400 L=0.0100 mol0.250\,\text{mol L}^{-1}\times0.0400\,\text{L}=0.0100\,\text{mol}0.250mol L−1×0.0400L=0.0100mol. The equation has a 1:11:11:1 ratio of silver nitrate to silver chloride, so 0.0100 mol AgCl0.0100\,\text{mol AgCl}0.0100mol AgCl forms. The 0.00100 mol0.00100\,\text{mol}0.00100mol option results from an incorrect volume conversion.
7.

Medium·Determine[2 marks]

In N2+3H2→2NH3\mathrm{N_2+3H_2\rightarrow2NH_3}N2​+3H2​→2NH3​, a mixture contains 1.20 mol1.20\,\text{mol}1.20mol nitrogen and 3.00 mol3.00\,\text{mol}3.00mol hydrogen. Determine the limiting reactant.
Show answer and explanation

Answer: C · Worked explanation

Nitrogen could form 1.20×(2/1)=2.40 mol NH31.20\times(2/1)=2.40\,\text{mol NH}_31.20×(2/1)=2.40mol NH3​, while hydrogen could form 3.00×(2/3)=2.00 mol NH33.00\times(2/3)=2.00\,\text{mol NH}_33.00×(2/3)=2.00mol NH3​. Hydrogen therefore limits the product amount. Comparing starting mole amounts alone ignores the reaction’s 1:31:31:3 nitrogen-to-hydrogen ratio.
8.

Medium·Calculate[2 marks]

For 2Al+3Cl2→2AlCl32\mathrm{Al}+3\mathrm{Cl_2}\rightarrow2\mathrm{AlCl_3}2Al+3Cl2​→2AlCl3​, calculate the moles of chlorine gas needed to react completely with 0.80 mol0.80\,\text{mol}0.80mol of aluminum.
Show answer and explanation

Answer: D · Worked explanation

The coefficient ratio is 3 mol Cl23\,\text{mol Cl}_23mol Cl2​ per 2 mol Al2\,\text{mol Al}2mol Al. Therefore, 0.80 mol Al×(3 mol Cl2/2 mol Al)=1.20 mol Cl20.80\,\text{mol Al}\times(3\,\text{mol Cl}_2/2\,\text{mol Al})=1.20\,\text{mol Cl}_20.80mol Al×(3mol Cl2​/2mol Al)=1.20mol Cl2​. Using a 2:32:32:3 ratio in the wrong direction would give the tempting but incorrect value of 0.53 mol0.53\,\text{mol}0.53mol.
9.

Medium·Calculate[2 marks]

A reaction has a theoretical yield of 15.0 g15.0\,\text{g}15.0g of product. If 12.6 g12.6\,\text{g}12.6g is collected, calculate the percent yield.
Show answer and explanation

Answer: C · Worked explanation

Use percent yield =(actual yield/theoretical yield)×100%=(\text{actual yield}/\text{theoretical yield})\times100\%=(actual yield/theoretical yield)×100%. Substitution gives (12.6 g/15.0 g)×100%=84.0%(12.6\,\text{g}/15.0\,\text{g})\times100\%=84.0\%(12.6g/15.0g)×100%=84.0%. The 119%119\%119% option reverses actual and theoretical yields, while the 2.40%2.40\%2.40% option reports the difference as a percentage incorrectly.
10.

Hard·Determine[2 marks]

A reaction follows 2Na+Cl2→2NaCl2\mathrm{Na}+\mathrm{Cl_2}\rightarrow2\mathrm{NaCl}2Na+Cl2​→2NaCl. If 9.20 g9.20\,\text{g}9.20g of sodium reacts with excess chlorine, determine the mass of sodium chloride formed. Use molar masses of 23.0 g mol−123.0\,\text{g mol}^{-1}23.0g mol−1 for sodium and 58.5 g mol−158.5\,\text{g mol}^{-1}58.5g mol−1 for sodium chloride.
Show answer and explanation

Answer: A · Worked explanation

Convert sodium to moles: 9.20 g/23.0 g mol−1=0.400 mol Na9.20\,\text{g}/23.0\,\text{g mol}^{-1}=0.400\,\text{mol Na}9.20g/23.0g mol−1=0.400mol Na. The 2:22:22:2 ratio gives 0.400 mol NaCl0.400\,\text{mol NaCl}0.400mol NaCl, which has a mass of 0.400×58.5=23.4 g0.400\times58.5=23.4\,\text{g}0.400×58.5=23.4g. The 11.7 g11.7\,\text{g}11.7g option incorrectly halves the sodium moles even though sodium and sodium chloride have equal coefficients.

Keep going

Next topic4.6 Introduction to titrationPrevious topic4.4 Physical and chemical changes

More in Unit 4 · Chemical Reactions

  1. 4.1Introduction for reactionsNotes · 10 questions
  2. 4.2Net ionic equationsNotes · 10 questions
  3. 4.3Representations of reactionsNotes · 10 questions
  4. 4.4Physical and chemical changesNotes · 10 questions
  5. 4.5StoichiometryNotes · 10 questions
  6. 4.6Introduction to titrationNotes · 10 questions
  7. 4.7Types of chemical reactionsNotes · 10 questions
  8. 4.8Introduction to acid-base reactionsNotes · 10 questions
  9. 4.9Oxidation-reduction (redox) reactionsNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Balanced equations give the mole ratios for reactions
  2. 2Convert measured amounts to moles before using ratios
  3. 3The limiting reactant sets the maximum product amount
  4. 4Percent yield compares collected product with possible product
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe