AP Environmental Science · Unit 2 · The Living World: Biodiversity
2.4 Ecological tolerance
Define ecological tolerance, explain how organisms respond to changing conditions, and describe how tolerance limits affect where species live.
1/5Every species can survive only within certain conditions
- Every species can survive only within certain conditions
- Tolerance ranges have an optimum and limits
- Organisms respond to changing conditions by moving, adjusting, or adapting
- Narrow or wide tolerance ranges shape how species fare
- Tolerance limits determine where a species can live
- Check your recall
- Practice: 10 questions
Part 1 of 5: Every species can survive only within certain conditions
A trout needs cold, oxygen-rich water. A desert cactus survives months without rain. Each species lives well in some conditions and poorly in others. Tolerance helps explain why a species is common in one place and absent in another.
Ecological tolerance is the range of environmental conditions that a species can survive. These conditions include temperature, moisture, salinity, pH, and light. Each is an abiotic factor. Salinity is the salt content of water.
Tolerance is measured one factor at a time. A species has a separate range for temperature, for salinity, and for every other factor.
Key terms · tap one for its definition
ecological tolerance
Ecological tolerance is the range of values of an environmental factor within which individuals of a species can survive.
abiotic factor
An abiotic factor is a nonliving physical or chemical part of the environment, such as temperature, light, moisture, or pH.
Part 2 of 5: Tolerance ranges have an optimum and limits
Imagine plotting how well a species does across a gradient, such as temperature. Performance is best near the middle and drops toward both ends. The figure shows this pattern.
In the optimum range, individuals grow and reproduce best. Toward either side lies a zone of stress, where survival is possible but growth and reproduction decline. Beyond the limits of tolerance, individuals cannot survive. Different species have different limits.
Key terms · tap one for its definition
optimum range
The optimum range is the span of an abiotic factor over which a species shows its best growth, survival, and reproduction.
zone of stress
A zone of stress is a range of an abiotic factor outside the optimum, where organisms survive but grow and reproduce less.
limits of tolerance
The limits of tolerance are the minimum and maximum values of an abiotic factor between which a species can survive.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: C · Worked explanation
Part 3 of 5: Organisms respond to changing conditions by moving, adjusting, or adapting
Conditions rarely stay constant, so organisms must cope. Some responses take hours, and others take many generations. A lizard that is too hot may rest in shade, and a plant may drop its leaves in drought.
- Behavior: an animal moves to shade, burrows, or migrates.
- Body processes: a mammal sweats, pants, or shivers to hold a steady temperature.
- Adaptation over generations: inherited traits that suit the conditions become more common.
The first two responses help one individual within its lifetime. Adaptation changes a whole population, and only across many generations. No response can stretch an organism past its limits of tolerance.
Key term
adaptation
An adaptation is an inherited trait that increases survival or reproductive success in a particular environment.
Part 4 of 5: Narrow or wide tolerance ranges shape how species fare
Look at which animals live in cities. Some, such as raccoons, thrive almost anywhere people live. Others, such as giant pandas, are found in only a few habitats.
A generalist species tolerates a wide range of conditions and uses many resources. A specialist species tolerates a narrow range and depends on specific conditions or resources.
Generalist and specialist species
- Feature
- Tolerance range
- Generalist
- Wide
- Specialist
- Narrow
- Feature
- Where it can live
- Generalist
- Many environments
- Specialist
- Few environments
- Feature
- Diet or habitat
- Generalist
- Varied
- Specialist
- Specific
- Feature
- Response to change
- Generalist
- Often copes
- Specialist
- Often declines
Specialists can thrive where their needs are met. Yet they are more vulnerable when conditions shift, because they have little room to adjust. Generalists often spread into new places, including areas changed by people.
Key terms · tap one for its definition
generalist species
A generalist species is a species with broad tolerance limits and varied resource use, so it can live in many environments.
specialist species
A specialist species is a species with narrow tolerance limits or specific resource needs, so it can live in only a few environments.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 5 of 5: Tolerance limits determine where a species can live
A species can live in a place only if every condition there falls within its tolerance range. If one factor lies outside, the species cannot survive. That factor is a limiting factor.
Mountains show this clearly. Temperature drops as elevation rises, so different species occupy different bands. Each lives only where its limits are met.
A limiting factor can be any condition, including temperature, moisture, or salinity. Even a species that suits every other condition is excluded by it. Different factors can limit the same species in different places.
Worked example
Reading a tolerance range
- At 10 °C, the water is above the lower limit of 6 °C but below the optimum range. The fish is in a zone of stress.
- At 18 °C, the water is inside the optimum range of 14 °C to 22 °C. The fish does best.
- At 31 °C, the water is above the upper limit of 28 °C. The fish cannot survive.
Answer: The fish is stressed at 10 °C, performs best at 18 °C, and cannot survive at 31 °C.
Key term
limiting factor
A limiting factor is a resource or condition that restricts the survival, growth, or distribution of a population.
Check your recall[13 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Describe[2 marks]
Describe ecological tolerance and give one example of an abiotic factor to which it applies.
Show mark schemeHide mark scheme
Model answer
Ecological tolerance is the range of values of an environmental factor within which a species can survive. It applies to abiotic factors such as temperature.
- 1 mark for describing ecological tolerance as the range of conditions a species can survive
- 1 mark for giving a valid abiotic factor such as temperature, moisture, salinity, pH, or light
- 2.Explain[2 marks]
Explain why a species in a zone of stress may be found there but be less common.
Show mark schemeHide mark scheme
Model answer
In a zone of stress, individuals can survive. Their growth and reproduction are reduced, so fewer offspring are produced and the population tends to be smaller.
- 1 mark for stating that individuals survive in a zone of stress
- 1 mark for explaining that reduced growth or reproduction leads to a smaller population
- 3.Describe[2 marks]
Describe two differences between a generalist species and a specialist species.
Show mark schemeHide mark scheme
Model answer
A generalist species has a wide tolerance range and can live in many environments. A specialist species has a narrow range and depends on specific conditions or resources, so it is more vulnerable to change.
- 1 mark for a valid difference in tolerance range, wide versus narrow
- 1 mark for a valid second difference, such as habitat range, resource needs, or vulnerability to change
- 4.Determine[2 marks]
Determine whether a beetle can survive at 30 °C, and describe how it would do. Its limits of tolerance are 5 °C and 35 °C, and its optimum range is 18 °C to 26 °C.
Show mark schemeHide mark scheme
Model answer
Yes, it can survive, because 30 °C lies between 5 °C and 35 °C. It is above the optimum range, so it is in a zone of stress with reduced growth and reproduction.
- 1 mark for determining that 30 °C is within the limits of tolerance, so the beetle survives
- 1 mark for identifying that 30 °C is above the optimum range, so it is in a zone of stress with reduced performance
- 5.Explain[3 marks]
Explain how tolerance limits determine where a species lives.
Show mark schemeHide mark scheme
Model answer
A species can live only where every abiotic factor lies within its tolerance limits. If one factor, the limiting factor, falls outside its limits, the species cannot survive there. For example, on a mountain, a species occupies only the elevations whose temperatures it tolerates.
- 1 mark for stating that every abiotic factor must fall within the limits of tolerance
- 1 mark for stating that one factor outside the limits prevents survival
- 1 mark for giving a valid example such as elevation bands on a mountain
- 6.Justify[2 marks]
Justify why specialist species are often more at risk than generalist species when conditions change.
Show mark schemeHide mark scheme
Model answer
A specialist species has narrow tolerance limits and specific resource needs. A small change can push a factor beyond its limits, whereas a generalist species can cope with a wider range of conditions.
- 1 mark for stating that specialists have narrow tolerance limits or specific needs
- 1 mark for explaining that a small change can exceed their limits, while generalists tolerate more

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
Easy[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumDetermine[1 mark]
Show answer and explanation
Answer: D · Worked explanation
MediumIdentify[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumDetermine[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumPredict[1 mark]
Show answer and explanation
Answer: A · Worked explanation
HardExplain[2 marks]
Show answer and explanation
Answer: B · Worked explanation
HardPredict[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardIdentify[2 marks]
Show answer and explanation
Answer: C · Worked explanation