Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Environmental Science
  3. ›3 Populations
  4. ›3.5 Population growth and resources

AP Environmental Science · Unit 3 · Populations

3.5 Population growth and resources

Calculate population growth from births and deaths, and explain how resources and limiting factors control population size.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Births and deaths change the size of a population
  1. 1Births and deaths change the size of a population
  2. 2A growth rate compares net change with population size
  3. 3Resources set how large a population can become
  4. 4Limiting factors keep populations from growing without end
  5. 5Changing rates decide whether a population grows or declines
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Births and deaths change the size of a population

A town’s population changes every year. Babies are born, residents die, and some people move in or out. Start with the first two.

Population size is the number of individuals of one species in a defined area. Births add new individuals during a stated time interval, such as one year. Deaths remove individuals during the same interval.

When births exceed deaths, the population grows. When deaths exceed births, it shrinks. If they are equal, the size stays about the same. This note ignores movement into or out of the area.

Key terms · tap one for its definition

population size

Population size is the number of individuals of one species in a defined area.

births

Births are new individuals produced within a population during a stated time interval.

deaths

Deaths are individuals that die within a population during a stated time interval.

Part 1 done

2

Part 2 of 5: A growth rate compares net change with population size

Now put numbers on that change. Suppose a herd of 1,000 deer has 100 births and 60 deaths in a year. The herd gains 40 deer, which is 4.0% of its size.

The growth rate gives this change as a percent. Subtract deaths from births, divide by population size, then multiply by 100.

growth rate (%)=births−deathspopulation size×100\mathrm{growth\,rate}\ (\%)=\frac{\mathrm{births}-\mathrm{deaths}}{\mathrm{population\,size}}\times100growthrate (%)=populationsizebirths−deaths​×100

Worked example

Calculate a growth rate

A population of 5,000 deer has 600 births and 350 deaths in one year. Calculate the growth rate and the new population size.
  1. 1
    Word equation: growth rate equals births minus deaths, divided by population size, times 100.
  2. 2
    Substitute: 600−3505,000×100\frac{600-350}{5{,}000}\times1005,000600−350​×100.
  3. 3
    Net change: 600−350=250600-350=250600−350=250 deer, so 2505,000×100=+5.0%\frac{250}{5{,}000}\times100=+5.0\%5,000250​×100=+5.0%.
  4. 4
    New population size: 5,000+250=5,2505{,}000+250=5{,}2505,000+250=5,250 deer.

Answer: The growth rate is +5.0% per year, and the new population size is 5,250 deer.

A negative result means the population is shrinking. Rates are often given per 1,000 individuals, which makes populations of different sizes easier to compare.

Exam tip

Show the subtraction, the division and the unit. Write the answer as a percent per year and say whether the population grows or shrinks.

Key term

growth rate

The growth rate is the net change in population size over a time interval divided by the starting population size, expressed as a percent.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the expression that gives the growth rate as a percent when movement into or out of the area is ignored.
Show answer and explanation

Answer: C · Worked explanation

Growth rate is the net change, births minus deaths, divided by population size and multiplied by 100. Adding births and deaths ignores that deaths reduce the population. Leaving out the division by population size gives a number of individuals, not a percent.
3

Part 3 of 5: Resources set how large a population can become

A growth rate is not constant. It changes with the supply of food, water, shelter and breeding space. When these resources are plentiful, females survive better and produce more young.

When resources become scarce, individuals starve or fail to breed. Births fall and deaths rise. Some animals leave to search elsewhere. Together these changes slow growth.

The population size that an environment can support over time is its carrying capacity. Growth tends to slow as a population approaches that size.

Common mistake

A larger population does not always have a higher growth rate. Growth rate depends on births and deaths relative to population size.

Key term

carrying capacity

Carrying capacity is the population size an environment can support over time under given conditions.

Part 3 done

4

Part 4 of 5: Limiting factors keep populations from growing without end

Resources are one kind of control. A limiting factor is anything that keeps a population from growing larger. Food, water, space, predators and disease can all play this role.

Ecologists sort limiting factors by whether their effect depends on crowding. A density-dependent factor has a stronger effect as the population becomes more crowded. A density-independent factor affects the population whatever its crowding.

Two kinds of limiting factor

TypeEffect depends on crowding?Examples
Density-dependentYesDisease, competition for food, predation
Density-independentNoWildfire, flood, severe storm, hard freeze
Type
Density-dependent
Effect depends on crowding?
Yes
Examples
Disease, competition for food, predation
Type
Density-independent
Effect depends on crowding?
No
Examples
Wildfire, flood, severe storm, hard freeze

Disease shows the difference clearly. It spreads faster among crowded animals, so its effect rises with crowding. A flood harms crowded and sparse populations alike.

Key terms · tap one for its definition

limiting factor

A limiting factor is a resource or condition that restricts the growth, size or distribution of a population.

density-dependent factor

A density-dependent factor is a limiting factor whose effect on birth or death rates changes with the number of individuals per unit area.

density-independent factor

A density-independent factor is a limiting factor whose effect on a population does not depend on the number of individuals per unit area.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the density-independent limiting factor.
Show answer and explanation

Answer: A · Worked explanation

A wildfire harms a population whether it is crowded or sparse, so it is density-independent. Disease, competition for food and predation each become stronger as crowding increases, so they are density-dependent. Many students pick disease because it sounds like a natural hazard, but its effect depends on how crowded the animals are.
5

Part 5 of 5: Changing rates decide whether a population grows or declines

Now combine the ideas. Limiting factors act by changing birth and death rates. Their effects decide the overall trend.

  • If births exceed deaths, the population grows.
  • If births equal deaths, the population stays about the same.
  • If births are fewer than deaths, the population declines.

For example, a drought reduces plant growth. Less food means fewer births and more deaths among herbivores. Their population falls until it matches the reduced food supply.

In real populations, individuals also move in or out. This movement can add to or offset the changes caused by births and deaths.

Go deeperDoubling time and the rule of 70

A steady growth rate also predicts how long a population takes to double. Divide 70 by the percent growth rate per year to estimate the doubling time in years.

For example, a growth rate of 2.0% per year gives about 702.0=35\frac{70}{2.0}=352.070​=35 years. The rule works best for small, steady growth rates.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Calculate[3 marks]

    Calculate the growth rate of a population of 2,000 individuals that has 150 births and 110 deaths in one year.

    Show mark schemeHide mark scheme

    Model answer

    Growth rate = 150−1102,000×100=+2.0%\frac{150-110}{2{,}000}\times100=+2.0\%2,000150−110​×100=+2.0% per year.

    • 1 mark for subtracting deaths from births to get 40
    • 1 mark for dividing by the population size of 2,000 and multiplying by 100
    • 1 mark for giving the answer as +2.0% per year
  2. 2.Identify[1 mark]

    Identify one density-independent factor that can limit a population.

    Show mark schemeHide mark scheme

    Model answer

    A wildfire, flood, severe storm or hard freeze.

    • 1 mark for identifying a valid density-independent factor such as wildfire, flood, severe storm or hard freeze
  3. 3.Describe[2 marks]

    Describe how a decline in food supply changes the birth and death rates of a population.

    Show mark schemeHide mark scheme

    Model answer

    Births fall because fewer individuals can breed successfully. Deaths rise because more individuals starve.

    • 1 mark for stating that births fall
    • 1 mark for stating that deaths rise
  4. 4.Explain[3 marks]

    Explain why disease is a density-dependent factor.

    Show mark schemeHide mark scheme

    Model answer

    Disease spreads more easily when individuals are crowded because contact between them is more frequent. More individuals become infected, so deaths rise. Its effect therefore increases with population density.

    • 1 mark for stating that crowding increases contact between individuals
    • 1 mark for stating that more infection raises deaths
    • 1 mark for linking the stronger effect to higher density
  5. 5.Determine[3 marks]

    Determine the growth rate of a population with 30 births and 45 deaths per 1,000 individuals in one year. Describe what happens to the population size.

    Show mark schemeHide mark scheme

    Model answer

    Net change = 30 − 45 = −15 per 1,000, so the growth rate is −151,000×100=−1.5%\frac{-15}{1{,}000}\times100=-1.5\%1,000−15​×100=−1.5% per year. The population declines.

    • 1 mark for finding a net change of −15 per 1,000
    • 1 mark for calculating a growth rate of −1.5% per year
    • 1 mark for stating that the population declines

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

What usually happens to births and deaths when resources become scarce?
Show answer and explanation

Answer: C · Worked explanation

Scarce food, water or space leaves fewer individuals able to breed and more that starve, so births fall and deaths rise. The opposite pattern appears when resources are plentiful. The pattern reverses when conditions improve and resources become plentiful again.
4.

Medium[2 marks]

A population of 800 has 96 births and 40 deaths in one year. Calculate the growth rate.
Show answer and explanation

Answer: C · Worked explanation

Net change is 96 − 40 = 56. The growth rate is 56800×100=+7.0%\frac{56}{800}\times100=+7.0\%80056​×100=+7.0%. The value 12.0% uses births only, 5.0% uses deaths only, and 17.0% wrongly adds births and deaths. Always subtract deaths from births first, then divide by the starting population size.
5.

Medium[2 marks]

A population of 4,000 has a growth rate of −2.5% over one year. Calculate the new population size.
Show answer and explanation

Answer: A · Worked explanation

The change is 4,000×0.025=1004{,}000\times0.025=1004,000×0.025=100 individuals, and the sign is negative, so the new size is 4,000 − 100 = 3,900. The value 4,100 ignores the negative sign. The value 3,975 treats 2.5% as 25 individuals.
6.

Medium[1 mark]

Which statement best explains why disease is a density-dependent factor?
Show answer and explanation

Answer: A · Worked explanation

Crowding increases contact between individuals, so infection spreads faster in dense populations and the effect rises with density. A factor that affects all populations equally would be density-independent. Such a factor is therefore tied to crowding itself, not to chance events like storms or floods.
7.

Medium[2 marks]

A population has a birth rate of 18 per 1,000 and a death rate of 11 per 1,000 per year. Determine the growth rate as a percent.
Show answer and explanation

Answer: B · Worked explanation

Net change is 18 − 11 = 7 per 1,000. As a percent, 71,000×100=+0.70%\frac{7}{1{,}000}\times100=+0.70\%1,0007​×100=+0.70%. The value 7.0% forgets that a rate per 1,000 must be divided by 1,000 before converting to a percent. The value 2.9% adds the two rates.
8.

Hard[2 marks]

A herd at its carrying capacity of 600 loses 150 animals in a wildfire, and plant growth then recovers. Predict the most likely change in the herd afterward.
Show answer and explanation

Answer: B · Worked explanation

With 450 animals sharing food that supported 600, each animal has more resources, so births rise and deaths fall. The herd grows back toward carrying capacity. The fire killed animals but did not permanently remove the food supply. In other words, a drop in numbers that leaves resources unchanged lets growth resume toward carrying capacity.
9.

Hard[2 marks]

Population A has 10,000 individuals with 500 births and 300 deaths in one year. Population B has 1,000 individuals with 80 births and 30 deaths. Which statement is correct?
Show answer and explanation

Answer: A · Worked explanation

Population A gains 200 individuals, a growth rate of 2.0%. Population B gains 50, a growth rate of 5.0%. Growth rate compares net change with size, so B grows faster in percent terms. A larger number of births does not mean a higher rate.
10.

Hard[2 marks]

A population of 2,000 had 100 births and 40 deaths in one year. A disease outbreak raises deaths the next year while births stay at 100. The growth rate is now +1.0%. Determine the number of deaths.
Show answer and explanation

Answer: C · Worked explanation

A growth rate of 1.0% of 2,000 is a net change of 20 individuals. Deaths equal births minus net change, so 100 − 20 = 80. The value 20 is the net change itself, and 60 is the earlier deaths increased by only 20.

Keep going

Next topic3.6 Age structure diagramsPrevious topic3.4 Carrying capacity

More in Unit 3 · Populations

  1. 3.1Generalist and specialist speciesNotes · 10 questions
  2. 3.2K- and r-selected speciesNotes · 10 questions
  3. 3.3Survivorship curvesNotes · 10 questions
  4. 3.4Carrying capacityNotes · 10 questions
  5. 3.5Population growth and resourcesNotes · 10 questions
  6. 3.6Age structure diagramsNotes · 10 questions
  7. 3.7Total fertility rateNotes · 10 questions
  8. 3.8Human population dynamicsNotes · 10 questions
  9. 3.9Demographic transitionNotes · 10 questions

All AP Environmental Science topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Births and deaths change the size of a population
  2. 2A growth rate compares net change with population size
  3. 3Resources set how large a population can become
  4. 4Limiting factors keep populations from growing without end
  5. 5Changing rates decide whether a population grows or declines
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe