Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Environmental Science
  3. ›7 Atmospheric Pollution
  4. ›7.7 Acid rain

AP Environmental Science · Unit 7 · Atmospheric Pollution

7.7 Acid rain

Explain how acid rain forms from air pollutants, describe its effects, identify its sources, and discuss ways to reduce it.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Acid rain is rain with a lower pH than normal
  1. 1Acid rain is rain with a lower pH than normal
  2. 2Sulfur and nitrogen gases react in air to form strong acids
  3. 3Power plants, vehicles, and smelters are the main sources
  4. 4Acid deposition damages water, soil, forests, and buildings
  5. 5Reducing emissions is the most effective way to limit acid rain
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Acid rain is rain with a lower pH than normal

Clean rain is already slightly acidic. Carbon dioxide dissolves in rain and forms a weak acid. An acid donates a proton to another substance, which raises the hydrogen ion concentration, [H+][\mathrm{H^+}][H+].

Acidity is reported as pH. A lower pH means a more acidic solution. The pH scale is logarithmic, so each one-unit drop means ten times more hydrogen ions.

Clean rain has a pH of about 5.6. Acid rain is rain with a lower pH than that. Pollution from burning fossil fuels is its main cause.

Worked example

Comparing two pH values

Rain at pH 4.6 falls on a region that normally receives rain at pH 5.6. Determine how many times more acidic the rain is.
  1. 1
    Find the pH difference: 5.6−4.6=1.05.6-4.6=1.05.6−4.6=1.0.
  2. 2
    Each pH unit is a tenfold change in [H+][\mathrm{H^+}][H+].
  3. 3
    Raise ten to the power of the difference: 101.0=1010^{1.0}=10101.0=10.

Answer: The rain at pH 4.6 has 10 times the hydrogen ion concentration of normal rain.

Key terms · tap one for its definition

acid

An acid donates a proton to another substance.

pH

The pH of a solution is a logarithmic measure of hydrogen ion concentration, where a lower value means more acidic.

Part 1 done

2

Part 2 of 5: Sulfur and nitrogen gases react in air to form strong acids

Now follow those gases after they leave a smokestack or tailpipe. Sulfur dioxide, SO2\mathrm{SO_2}SO2​, and nitrogen oxides, NOx\mathrm{NO_x}NOx​, mix with oxygen and water in the air. They form sulfuric acid, H2SO4\mathrm{H_2SO_4}H2​SO4​, and nitric acid, HNO3\mathrm{HNO_3}HNO3​. Both are strong acids, so even small amounts lower the pH of rain noticeably.

Figure 1. Pollutant gases react in the air to form acids, which then reach the ground in wet or dry form.

Wind can carry these acids far from their source. Acid deposition is the arrival of acids at Earth’s surface. It can be wet, in rain and snow, or dry, as particles and gases. This is why a lake can be damaged by a power plant hundreds of kilometers away.

Key term

acid deposition

Acid deposition is the transfer of acidic compounds from the atmosphere to Earth’s surface as wet deposition or dry deposition.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the pair of pollutants that cause most acid rain.
Show answer and explanation

Answer: B · Worked explanation

Sulfur dioxide forms sulfuric acid and nitrogen oxides form nitric acid, and both strong acids lower the pH of rain. Carbon dioxide does lower pH slightly, but that effect already gives clean rain its pH of about 5.6, so it is not the cause of acid rain.
3

Part 3 of 5: Power plants, vehicles, and smelters are the main sources

Next, consider where the sulfur and nitrogen gases come from. Most come from burning fossil fuels, so the sources are tied to energy and transport.

  • Coal-burning power plants release sulfur dioxide because coal contains sulfur.
  • Metal smelters release sulfur dioxide when sulfur-bearing ores are heated.
  • Vehicle engines release nitrogen oxides, formed when air is heated to high temperatures.
  • Power plants and industrial boilers also release nitrogen oxides.
  • Volcanoes release sulfur dioxide, and lightning forms nitrogen oxides.

Exam tip

Pair each gas with its source. Sulfur dioxide comes from the sulfur in coal and ores, and nitrogen oxides come from hot engines.

Part 3 done

4

Part 4 of 5: Acid deposition damages water, soil, forests, and buildings

Once acids land, they change the places they reach. Fish, soil organisms, trees, and stone all respond to acid in different ways.

Effects of acid deposition

TargetMain effect
Lakes and streamsLow pH kills fish eggs and amphibians, so sensitive species disappear.
SoilAcid washes out calcium and magnesium and frees toxic aluminum.
ForestsDamaged leaves and weak roots leave trees open to disease and drought.
Buildings and statuesAcids dissolve limestone and marble and corrode metal.
Target
Lakes and streams
Main effect
Low pH kills fish eggs and amphibians, so sensitive species disappear.
Target
Soil
Main effect
Acid washes out calcium and magnesium and frees toxic aluminum.
Target
Forests
Main effect
Damaged leaves and weak roots leave trees open to disease and drought.
Target
Buildings and statues
Main effect
Acids dissolve limestone and marble and corrode metal.

Some areas resist this damage. Buffering is the ability of water or soil to resist pH change. Limestone-rich soils buffer well, while thin soils over granite do not.

Common mistake

Acid rain is too weak to burn skin. Its harm to people is mostly indirect, through damaged ecosystems and polluted air.

Key term

buffering

Buffering is the ability of a solution or soil to neutralize added acid and so keep its pH nearly constant.

Part 4 done

Quick check

One question on the part you just read

Easy

Which source releases large amounts of sulfur dioxide because of the sulfur in its fuel?
Show answer and explanation

Answer: A · Worked explanation

Coal contains sulfur, which becomes sulfur dioxide when the coal burns. Natural gas contains very little sulfur, so furnaces release little sulfur dioxide, although they do release some nitrogen oxides. Fertilizer spreading is not a combustion source of sulfur gases.
5

Part 5 of 5: Reducing emissions is the most effective way to limit acid rain

Since the damage starts with emissions, prevention works best.

  • Install a scrubber on each smokestack to remove sulfur dioxide from exhaust.
  • Fit vehicles with catalytic converters to cut nitrogen oxide emissions.
  • Switch from coal to natural gas, wind, and solar power.
  • Set emission limits and permit-trading programs for power plants.
  • Use less electricity and burn less fuel.

Cleanup helps only after damage occurs. Liming adds crushed limestone or lime to a lake or soil to raise its pH. It treats symptoms, costs a lot, and must be repeated.

Exam tip

When discussing solutions, name one prevention method and one cleanup method, then state a limit of each.

Key terms · tap one for its definition

scrubber

A scrubber is a device that removes sulfur dioxide and other pollutants from exhaust gases before they leave a smokestack.

liming

Liming is the addition of a basic material such as crushed limestone to acidified water or soil to neutralize the acid.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[2 marks]

    Identify two gases released by human activity that cause acid rain.

    Show mark schemeHide mark scheme

    Model answer

    Sulfur dioxide and nitrogen oxides.

    • 1 mark for identifying sulfur dioxide
    • 1 mark for identifying nitrogen oxides
  2. 2.Describe[3 marks]

    Describe how sulfur dioxide from a power plant can become acid deposition.

    Show mark schemeHide mark scheme

    Model answer

    Sulfur dioxide reacts with oxygen and water in the air to form sulfuric acid. Wind may carry the acid far away. It then falls as rain or snow, or as dry particles.

    • 1 mark for stating that sulfur dioxide reacts with oxygen and water in the air
    • 1 mark for stating that this forms sulfuric acid
    • 1 mark for stating that the acid reaches the ground in wet or dry form, possibly far from the source
  3. 3.Determine[2 marks]

    Determine how many times more acidic rain at pH 3.6 is than clean rain at pH 5.6.

    Show mark schemeHide mark scheme

    Model answer

    The difference is 5.6−3.6=2.05.6-3.6=2.05.6−3.6=2.0 pH units. Each unit is tenfold, so 102.0=10010^{2.0}=100102.0=100 times more acidic.

    • 1 mark for finding a difference of 2.0 pH units
    • 1 mark for applying a tenfold change per unit to obtain 100 times
  4. 4.Explain[3 marks]

    Explain why a lake on thin granite soil is damaged more by acid rain than a lake on limestone-rich soil.

    Show mark schemeHide mark scheme

    Model answer

    Limestone-rich soil buffers acid, so the lake’s pH changes little. Thin granite soil has little buffering. The pH therefore falls, and aluminum may be freed, harming sensitive species.

    • 1 mark for stating that limestone-rich soil buffers or neutralizes acid
    • 1 mark for stating that thin granite soil has little buffering capacity
    • 1 mark for linking the pH drop to harm to sensitive organisms
  5. 5.Justify[3 marks]

    Justify the claim that cutting emissions is a better long-term response to acid rain than liming lakes.

    Show mark schemeHide mark scheme

    Model answer

    Liming raises a lake’s pH only temporarily and must be repeated. It does not protect soil, forests, or buildings. Cutting emissions removes the cause, so all of these are protected.

    • 1 mark for stating that liming is temporary or must be repeated
    • 1 mark for stating that liming treats only the treated water, not soil, forests, or buildings
    • 1 mark for stating that cutting emissions removes the cause everywhere

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

What is the approximate pH of clean, unpolluted rain?
Show answer and explanation

Answer: C · Worked explanation

Carbon dioxide dissolves in falling rain and forms a weak acid, so clean rain sits near pH 5.6. A pH of 7.0 describes pure neutral water, but rain is never that pure. Rain near pH 4.0 would already count as acid rain.
4.

Medium·Determine[1 mark]

Determine how many times more acidic rain at pH 4.6 is than rain at pH 5.6.
Show answer and explanation

Answer: D · Worked explanation

The pH difference is 5.6−4.6=1.05.6-4.6=1.05.6−4.6=1.0 unit, and each unit is a tenfold change, so the factor is 101.0=1010^{1.0}=10101.0=10. The value 1.2 comes from dividing 5.6 by 4.6, which ignores that the pH scale is logarithmic. A factor of 100 would need a two-unit drop.
5.

Medium·Explain[1 mark]

Two lakes receive rain at pH 4.8. One lake, on limestone-rich soil, stays near pH 7. The other, on thin granite soil, falls to pH 5.0. What best explains the difference?
Show answer and explanation

Answer: A · Worked explanation

Both lakes receive rain of the same pH, so the difference lies in how well the surroundings neutralize acid. Limestone-rich soil buffers well. The idea that the limestone lake receives less acid deposition contradicts the data, because the rain pH is identical.
6.

Medium·Explain[1 mark]

A marble statue in an industrial city loses fine detail over several decades. Which explanation is best?
Show answer and explanation

Answer: D · Worked explanation

Acid deposition dissolves marble and limestone, so surface detail wears away faster than in a clean area. Basic gases would not attack the stone, because bases do not dissolve marble the way acids do. Rain in industrial areas is more acidic, not above pH 7.
7.

Medium·Predict[2 marks]

A forested lake region has no industry. A large coal-burning power plant operates 400 kilometers upwind. Fish numbers in the lake fall and the water is found to be acidic. What is the most likely explanation?
Show answer and explanation

Answer: B · Worked explanation

The gases and acids can travel hundreds of kilometers before they fall, so damage often appears far from the source. The claim that acid rain forms only where pollutants are emitted ignores this transport. Remote rain is not naturally more acidic than clean rain.
8.

Hard·Explain[2 marks]

A coal plant installs scrubbers. Ten years later, rain downwind is less acidic but still below pH 5.6. Which explanation is most likely?
Show answer and explanation

Answer: C · Worked explanation

A scrubber targets sulfur dioxide, so sulfuric acid falls, but vehicles and other sources keep releasing nitrogen oxides that form nitric acid. The idea that scrubbers add sulfur is the reverse of what they do. They clean exhaust at the stack and do not release lime into the sky.
9.

Hard·Justify[2 marks]

A neighbor claims that liming a lake each year solves the acid rain problem. Which response is best?
Show answer and explanation

Answer: D · Worked explanation

Liming neutralizes acid in the treated water for a while, but it must be repeated and does nothing about the sulfur and nitrogen gases. Soil, forests, and buildings keep receiving acid deposition. Saying liming lowers pH is wrong, because a basic material raises pH.
10.

Hard·Justify[2 marks]

Which single policy would reduce both sulfuric acid and nitric acid formation most broadly?
Show answer and explanation

Answer: B · Worked explanation

Wind and solar power release no sulfur dioxide or nitrogen oxides, and burning less vehicle fuel cuts nitrogen oxides, so both acids fall. Taller stacks only spread the same pollutants over a wider area. Scrubbers on power plants address sulfur dioxide but leave vehicle emissions untouched.

Keep going

Next topic7.8 Noise pollutionPrevious topic7.6 Reducing air pollutants

More in Unit 7 · Atmospheric Pollution

  1. 7.1Introduction to air pollutionNotes · 10 questions
  2. 7.2Photochemical smogNotes · 10 questions
  3. 7.3Thermal inversionNotes · 10 questions
  4. 7.4Atmospheric CO2 and particulatesNotes · 10 questions
  5. 7.5Indoor air pollutantsNotes · 10 questions
  6. 7.6Reducing air pollutantsNotes · 10 questions
  7. 7.7Acid rainNotes · 10 questions
  8. 7.8Noise pollutionNotes · 10 questions

All AP Environmental Science topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Acid rain is rain with a lower pH than normal
  2. 2Sulfur and nitrogen gases react in air to form strong acids
  3. 3Power plants, vehicles, and smelters are the main sources
  4. 4Acid deposition damages water, soil, forests, and buildings
  5. 5Reducing emissions is the most effective way to limit acid rain
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe