Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Environmental Science
  3. ›8 Aquatic and Terrestrial Pollution
  4. ›8.11 Sewage treatment

AP Environmental Science · Unit 8 · Aquatic and Terrestrial Pollution

8.11 Sewage treatment

Describe the main steps in municipal sewage treatment and explain how each step reduces water pollution.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Untreated sewage harms the water it enters
  1. 1Untreated sewage harms the water it enters
  2. 2Primary treatment removes solids by letting them settle
  3. 3Microbes in secondary treatment consume dissolved organic matter
  4. 4Tertiary treatment and disinfection finish the cleanup
  5. 5Each stage removes a different pollutant from the water
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Untreated sewage harms the water it enters

Every time you flush a toilet or run a drain, wastewater leaves your home. Sewers collect it and carry it to a treatment plant. This mixture is sewage.

Released untreated, sewage causes serious problems. Its organic matter feeds decomposers that use up dissolved oxygen. Its nitrogen and phosphorus can fuel algal blooms. Its microbes can make people sick.

A treatment plant removes these threats before the water returns to a river, lake, or ocean. It works in stages, and each stage handles a different kind of pollutant.

Key term

sewage

Sewage is wastewater carried by sewers that contains human waste, organic matter, nutrients, microbes, and sometimes industrial chemicals.

Part 1 done

2

Part 2 of 5: Primary treatment removes solids by letting them settle

The first stages of a plant are physical, not biological. Wastewater passes through screens that catch rags, plastic, and other large objects. In a grit chamber, sand and gravel sink out of the slow-moving flow.

Next, the water rests in a large settling tank. This is primary treatment. Heavy solids sink to the bottom as sludge, while oil and grease float to the top as scum. Both are removed, and the clearer water moves on.

Common mistake

Primary treatment does not remove most dissolved pollutants or kill microbes. It only removes material that settles or floats.

Key terms · tap one for its definition

primary treatment

Primary treatment is the physical removal of floating and settleable solids from wastewater, with little removal of dissolved material.

sludge

Sludge is the semi-solid material that settles out of wastewater in treatment tanks and must be treated before disposal.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the main purpose of primary treatment in a sewage plant.
Show answer and explanation

Answer: C · Worked explanation

Primary treatment is physical: screens, grit chambers, and settling tanks remove material that floats or sinks. Decomposing dissolved organic matter with bacteria belongs to secondary treatment. Killing microbes is disinfection, and nutrient removal is tertiary treatment.
3

Part 3 of 5: Microbes in secondary treatment consume dissolved organic matter

What remains after settling is mostly dissolved and very fine organic matter. A stage called secondary treatment uses living organisms to remove it.

The water flows into aerated tanks, where air is bubbled through the mixture. Bacteria that need oxygen thrive there. They feed on the organic matter and convert it to carbon dioxide, water, and more bacteria.

The mixture then moves to a second settling tank, where the bacteria clump together and sink as more sludge. Engineers measure success with biochemical oxygen demand, or BOD. Secondary treatment greatly lowers BOD before the water is released.

Exam tip

To explain a drop in BOD, name the bacteria, the added oxygen, and the organic matter they consume.

Key terms · tap one for its definition

secondary treatment

Secondary treatment is the biological stage in which oxygen-using bacteria decompose dissolved organic matter, followed by settling of the resulting bacterial mass.

biochemical oxygen demand

Biochemical oxygen demand is the amount of dissolved oxygen, usually in mg/L, that microbes use while decomposing organic matter in a water sample.

Part 3 done

4

Part 4 of 5: Tertiary treatment and disinfection finish the cleanup

Secondary treatment still leaves some nutrients and many microbes in the water. Some plants add tertiary treatment to remove specific pollutants, especially nitrogen and phosphorus. Filters and added chemical or biological steps can do this. Lower nutrient levels help prevent algal blooms downstream.

The last step is disinfection. It kills most remaining disease-causing microbes. Plants commonly use chlorine, ultraviolet light, or ozone. Chlorine is often removed afterward because it can harm aquatic life. Disinfection comes last because suspended solids can shield microbes from chlorine and light.

Figure 1. Water moves down through each stage, and sludge is drawn off from both settling tanks.

Key terms · tap one for its definition

tertiary treatment

Tertiary treatment is an additional stage after secondary treatment that removes specific pollutants, such as nitrogen and phosphorus.

disinfection

Disinfection is a treatment step that kills or inactivates disease-causing microbes, without necessarily removing solids or dissolved nutrients.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the condition that bacteria need in the aerated tanks of secondary treatment.
Show answer and explanation

Answer: A · Worked explanation

Secondary treatment depends on living bacteria that need oxygen, so air is bubbled through the tanks. Chlorine would kill the bacteria that do the work, which is why chlorine is used only at the disinfection stage. Keeping organisms out would defeat the purpose of the step.
5

Part 5 of 5: Each stage removes a different pollutant from the water

Now that the steps are clear, compare what each one achieves. Treated water has a lower BOD, so more oxygen stays available for fish. Lower nutrient levels reduce algal blooms. Fewer microbes mean less risk of waterborne illness. Even treated water is not pure, but it is far less harmful.

What each stage removes from wastewater

StageMain pollutant removedMethod
PrimarySettleable solids, oil, greaseScreens, settling, skimming
SecondaryDissolved organic matterAeration and bacteria
TertiaryNitrogen and phosphorusFilters, chemical or biological steps
DisinfectionDisease-causing microbesChlorine, UV light, or ozone
Stage
Primary
Main pollutant removed
Settleable solids, oil, grease
Method
Screens, settling, skimming
Stage
Secondary
Main pollutant removed
Dissolved organic matter
Method
Aeration and bacteria
Stage
Tertiary
Main pollutant removed
Nitrogen and phosphorus
Method
Filters, chemical or biological steps
Stage
Disinfection
Main pollutant removed
Disease-causing microbes
Method
Chlorine, UV light, or ozone

Sludge also needs treatment. Microbes can break it down without oxygen, and the process releases methane that a plant can burn for energy. The remaining solids may be applied to land or sent to a landfill.

Worked example

Calculate a percent reduction in BOD

Wastewater entering secondary treatment has a BOD of 250 mg/L. The water leaving has a BOD of 25 mg/L. Calculate the percent reduction in BOD.
  1. 1
    Word equation: percent reduction equals the decrease in BOD divided by the starting BOD, times 100.
  2. 2
    Symbol equation: BODin−BODoutBODin×100\frac{\mathrm{BOD_{in}}-\mathrm{BOD_{out}}}{\mathrm{BOD_{in}}}\times100BODin​BODin​−BODout​​×100.
  3. 3
    Substitute: 250 mg/L−25 mg/L250 mg/L×100\frac{250\,\mathrm{mg/L}-25\,\mathrm{mg/L}}{250\,\mathrm{mg/L}}\times100250mg/L250mg/L−25mg/L​×100.
  4. 4
    Calculate: 225250×100=90\frac{225}{250}\times100=90250225​×100=90.

Answer: The BOD fell by 90 percent.

Go deeperWhy heavy rain can overwhelm a plant

Some older cities use combined sewers, which carry both sewage and stormwater in the same pipes. In heavy rain, the flow can exceed what the plant can treat.

To protect the plant, some of the mixture may be released directly into a river or bay without full treatment. This is one reason water quality can drop after storms.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[1 mark]

    Identify the material that collects at the bottom of the settling tank during primary treatment.

    Show mark schemeHide mark scheme

    Model answer

    Sludge, the settled solid material.

    • 1 mark for identifying sludge (settled solids)
  2. 2.Describe[4 marks]

    Describe the main steps in municipal sewage treatment in order.

    Show mark schemeHide mark scheme

    Model answer

    Screens and settling tanks remove large objects and solids in primary treatment. Aerated tanks let bacteria decompose dissolved organic matter in secondary treatment, followed by a second settling tank. Some plants add tertiary treatment to remove nutrients. Disinfection then kills disease-causing microbes before release.

    • 1 mark for stating that primary treatment removes solids by screening and settling
    • 1 mark for stating that secondary treatment uses bacteria in aerated tanks to decompose organic matter
    • 1 mark for stating that tertiary treatment may remove nitrogen and phosphorus
    • 1 mark for stating that disinfection kills disease-causing microbes before release
  3. 3.Explain[3 marks]

    Explain why secondary treatment lowers biochemical oxygen demand.

    Show mark schemeHide mark scheme

    Model answer

    Air is added to the tanks, so bacteria that need oxygen thrive. The bacteria decompose dissolved organic matter. With less organic matter left, microbes in the released water use less oxygen, so BOD is lower.

    • 1 mark for stating that air or oxygen is supplied to bacteria
    • 1 mark for stating that bacteria decompose or consume organic matter
    • 1 mark for linking the lower amount of organic matter to a lower oxygen demand
  4. 4.Calculate[2 marks]

    Calculate the percent reduction in BOD when wastewater with a BOD of 200 mg/L leaves treatment with a BOD of 30 mg/L.

    Show mark schemeHide mark scheme

    Model answer

    200−30200×100=85\frac{200-30}{200}\times100=85200200−30​×100=85, so the BOD fell by 85 percent.

    • 1 mark for calculating the decrease as 170 mg/L and dividing by 200 mg/L
    • 1 mark for giving 85 percent
  5. 5.Predict[2 marks]

    Predict one effect on a river if sewage received no secondary treatment before release.

    Show mark schemeHide mark scheme

    Model answer

    The water would keep a high BOD. Microbes in the river would use up dissolved oxygen while decomposing the organic matter, which could kill fish.

    • 1 mark for stating that the BOD or organic matter stays high
    • 1 mark for linking this to lower dissolved oxygen and harm to aquatic life

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify what sludge is in a treatment plant.
Show answer and explanation

Answer: D · Worked explanation

Sludge is the semi-solid material that settles in the treatment tanks, first in primary treatment and again after secondary treatment. It must be treated before disposal. Dissolved nutrients are not sludge because they stay in the water instead of settling out.
4.

Medium·Calculate[1 mark]

Calculate the percent reduction in BOD when wastewater entering a plant has a BOD of 240 mg/L and the water leaving has a BOD of 36 mg/L.
Show answer and explanation

Answer: B · Worked explanation

Percent reduction is 240−36240×100=204240×100=85\frac{240-36}{240}\times100=\frac{204}{240}\times100=85240240−36​×100=240204​×100=85 percent. The 15 percent value is 36240\frac{36}{240}24036​, which is the fraction of BOD that remains rather than the fraction removed. Dividing 240 by 36 gives 6.7, a ratio, not a percent reduction.
5.

Medium[1 mark]

A plant’s treated water has a low BOD but still contains high levels of nitrogen and phosphorus. Which additional step would best address this?
Show answer and explanation

Answer: D · Worked explanation

Nutrient removal is the job of tertiary treatment, which uses filters or added chemical and biological steps. Grit removal, screening, and skimming take out solid material, not dissolved nitrogen and phosphorus. Leaving the nutrients in would still allow algal blooms downstream.
6.

Medium·Predict[1 mark]

The air supply to an aerated tank fails for several days. Predict the effect on the water leaving the secondary stage.
Show answer and explanation

Answer: C · Worked explanation

Without air, bacteria that need oxygen cannot decompose organic matter well, so more of it remains and BOD stays high. Settling removes solids, not dissolved organic matter, so it cannot make up the difference. Microbes stopping work does not mean the water becomes free of oxygen demand.
7.

Medium·Predict[1 mark]

A town releases wastewater after primary treatment only. Predict the most likely problem in the receiving river.
Show answer and explanation

Answer: A · Worked explanation

Primary treatment leaves most dissolved organic matter in the water. Microbes in the river then use dissolved oxygen to decompose it, which can harm fish. Large objects are mostly removed by screens and settling at this stage. Nutrients would remain, not disappear.
8.

Hard[2 marks]

Which statement about sludge from a treatment plant is correct?
Show answer and explanation

Answer: B · Worked explanation

Plants often digest sludge with microbes that work without oxygen, and the methane released can be burned for energy. Sludge still holds organic matter and microbes, so it cannot simply be released. It forms in both settling stages, since primary tanks also collect settled solids.
9.

Hard·Determine[2 marks]

Wastewater has a BOD of 300 mg/L. Primary treatment lowers it by 30 percent. Secondary treatment then removes 90 percent of the BOD that remains. Determine the BOD of the water leaving secondary treatment.
Show answer and explanation

Answer: D · Worked explanation

After primary treatment, 300×0.70=210300\times0.70=210300×0.70=210 mg/L remains. Secondary treatment leaves 10 percent of that: 210×0.10=21210\times0.10=21210×0.10=21 mg/L. The 30 mg/L answer ignores the primary stage. The 189 mg/L answer treats 90 percent as the amount remaining instead of the amount removed.
10.

Hard·Explain[2 marks]

Explain why disinfection alone is not enough to treat raw sewage.
Show answer and explanation

Answer: C · Worked explanation

Disinfection targets microbes only. Solids, dissolved organic matter, and nutrients would pass through, so the water would still have a high BOD and could still fuel algal blooms. The claim that chlorine cannot kill microbes is false, since killing microbes is exactly its purpose.

Keep going

Next topic8.12 LD50Previous topic8.10 Waste reduction

More in Unit 8 · Aquatic and Terrestrial Pollution

  1. 8.7Persistent organic pollutantsNotes · 10 questions
  2. 8.8Bioaccumulation and biomagnificationNotes · 10 questions
  3. 8.9Solid waste disposalNotes · 10 questions
  4. 8.10Waste reductionNotes · 10 questions
  5. 8.11Sewage treatmentNotes · 10 questions
  6. 8.12LD50Notes · 10 questions
  7. 8.13Dose-response curvesNotes · 10 questions
  8. 8.14Pollution and human healthNotes · 10 questions
  9. 8.15Pathogens and infectious diseaseNotes · 10 questions

All AP Environmental Science topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Untreated sewage harms the water it enters
  2. 2Primary treatment removes solids by letting them settle
  3. 3Microbes in secondary treatment consume dissolved organic matter
  4. 4Tertiary treatment and disinfection finish the cleanup
  5. 5Each stage removes a different pollutant from the water
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe