Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›2 Force and Translational Dynamics
  4. ›2.9 Circular motion

AP Physics 1 · Unit 2 · Force and Translational Dynamics

2.9 Circular motion

Describe uniform circular motion, explain the direction of its acceleration and net force, and calculate centripetal acceleration and force.

  • 3 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Constant speed in a circle still means changing velocity
  1. 1Constant speed in a circle still means changing velocity
  2. 2Acceleration points toward the center of the circle
  3. 3A net force toward the center causes the acceleration
  4. 4Speed and radius determine the acceleration and force
  5. 5Solve circular motion problems by summing inward forces
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Constant speed in a circle still means changing velocity

A car rounding a bend at steady speed still turns. Its speed is constant, but its direction keeps changing. This is uniform circular motion: motion in a circle at constant speed.

Velocity is a vector, so a change in direction is a change in velocity. At every point, the velocity is tangent to the circle.

One full lap takes a time called the period, TTT. The distance around is 2πr2\pi r2πr, so the speed is v=2πrTv=\frac{2\pi r}{T}v=T2πr​.

Key terms · tap one for its definition

uniform circular motion

Motion along a circular path at constant speed; the velocity changes direction but not magnitude.

period

The time for one complete revolution, measured in seconds.

Part 1 done

2

Part 2 of 5: Acceleration points toward the center of the circle

Since the velocity changes, the object must be accelerating. Over a short time, the change in velocity points toward the center. This is centripetal acceleration, directed along the radius toward the center.

Figure 1. Compare the two arrows at each point. They stay at right angles to each other as the object moves around.

The acceleration is perpendicular to the velocity. It turns the object without changing its speed. A component along the velocity would speed the object up or slow it down.

Common mistake

Centripetal acceleration is not speeding up. It describes how quickly the direction changes, not the speed.

Key term

centripetal acceleration

The acceleration of an object in circular motion, directed toward the center, with magnitude ac=v2/ra_c = v^2/rac​=v2/r at constant speed.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the direction of the velocity of an object moving in a circle at constant speed.
Show answer and explanation

Answer: A · Worked explanation

At each instant the object moves along the circle's path, so its velocity points along the tangent to the circle. Toward the center is the direction of the acceleration, not the velocity. Velocity has no component perpendicular to the plane of the circle.
3

Part 3 of 5: A net force toward the center causes the acceleration

Newton's second law says the net force points the same way as the acceleration. For circular motion, the net force therefore points toward the center. Physicists call it the centripetal force. Different forces can play this role.

  • Ball on a string: tension
  • Car on a flat curve: static friction
  • Moon in orbit: gravity

Common mistake

Centripetal force is the net inward force, not an extra force to draw. A rider feels pushed outward only because the body tends to continue straight.

Key term

centripetal force

The net force on an object in circular motion, directed toward the center; it is not a separate type of force.

Part 3 done

4

Part 4 of 5: Speed and radius determine the acceleration and force

The size of the acceleration depends on speed and radius: ac=v2ra_c=\frac{v^2}{r}ac​=rv2​. Newton's second law then gives the net force, Fc=mac=mv2rF_c = ma_c=\frac{mv^2}{r}Fc​=mac​=rmv2​.

Speed is squared, so doubling the speed quadruples both quantities. Halving the radius at fixed speed doubles them. A heavier object needs a larger net force for the same path.

Worked example

Car on a curve

A 1200 kg car travels at 15 m/s around a circular curve of radius 50 m. Calculate its centripetal acceleration and the net force on it.
  1. 1
    Acceleration: ac=v2r=(15)250=22550=4.5 m/s2a_c=\frac{v^2}{r}=\frac{(15)^2}{50}=\frac{225}{50}=4.5\ \mathrm{m/s^2}ac​=rv2​=50(15)2​=50225​=4.5 m/s2.
  2. 2
    Force: Fc=mac=(1200)(4.5)=5400 NF_c=ma_c=(1200)(4.5)=5400\ \mathrm{N}Fc​=mac​=(1200)(4.5)=5400 N.

Answer: ac=4.5 m/s2a_c = 4.5\ \mathrm{m/s^2}ac​=4.5 m/s2 and Fc=5.4×103 NF_c = 5.4\times10^3\ \mathrm{N}Fc​=5.4×103 N, both directed toward the center.

Exam tip

Use speed in meters per second and radius in meters. Check that the units give m/s2\mathrm{m/s^2}m/s2 for acceleration.

Part 4 done

Quick check

One question on the part you just read

Easy

State the direction of the net force on an object in uniform circular motion.
Show answer and explanation

Answer: B · Worked explanation

The net force points in the same direction as the acceleration, which is toward the center of the circle. A force along the tangent would change the speed. A force pointing away from the center is not needed for circular motion.
5

Part 5 of 5: Solve circular motion problems by summing inward forces

Many problems give a real force and ask for the speed, or the reverse. A short routine keeps the signs straight.

  • Draw the free-body diagram.
  • Take the direction toward the center as positive.
  • Add the forces toward the center and subtract those pointing outward.
  • Set that sum equal to mv2r\frac{mv^2}{r}rmv2​.

Worked example

Ball on a string

A 0.50 kg ball moves at 4.0 m/s in a horizontal circle of radius 0.80 m on a frictionless table, held by a string. Determine the tension.
  1. 1
    Only the tension points toward the center, so T=FcT = F_cT=Fc​.
  2. 2
    Use Fc=mv2rF_c = \frac{mv^2}{r}Fc​=rmv2​.
  3. 3
    Substitute: T=(0.50)(4.0)20.80=8.00.80=10 NT=\frac{(0.50)(4.0)^2}{0.80}=\frac{8.0}{0.80}=10\ \mathrm{N}T=0.80(0.50)(4.0)2​=0.808.0​=10 N.

Answer: The tension is 10 N.

If the string tension disappears, no inward force remains. The ball then moves in a straight line along the tangent.

Note read

Check your recall[14 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe the motion of an object moving in a circle at constant speed.

    Show mark schemeHide mark scheme

    Model answer

    The object moves along a circular path at constant speed. Its direction changes continuously, so its velocity changes. The velocity is tangent to the circle at every point.

    • 1 mark for stating that the speed is constant
    • 1 mark for stating that the direction, and therefore the velocity, changes continuously
    • 1 mark for stating that the velocity is tangent to the circle
  2. 2.State[2 marks]

    State the direction of the acceleration and of the net force for an object in uniform circular motion.

    Show mark schemeHide mark scheme

    Model answer

    Both the acceleration and the net force point toward the center of the circle.

    • 1 mark for stating that the acceleration points toward the center
    • 1 mark for stating that the net force points toward the center
  3. 3.Explain[2 marks]

    Explain why an object moving in a circle at constant speed is accelerating.

    Show mark schemeHide mark scheme

    Model answer

    Acceleration is a change in velocity. Velocity is a vector, so its direction changing means the object accelerates even when the speed is constant.

    • 1 mark for stating that acceleration is a change in velocity
    • 1 mark for explaining that the changing direction changes the velocity even at constant speed
  4. 4.Calculate[2 marks]

    Calculate the centripetal acceleration of an object moving at 6.0 m/s in a circle of radius 3.0 m.

    Show mark schemeHide mark scheme

    Model answer

    ac=v2r=(6.0)23.0=12 m/s2a_c = \frac{v^2}{r} = \frac{(6.0)^2}{3.0} = 12\ \mathrm{m/s^2}ac​=rv2​=3.0(6.0)2​=12 m/s2, directed toward the center.

    • 1 mark for using ac=v2/ra_c = v^2/rac​=v2/r
    • 1 mark for obtaining 12 m/s212\ \mathrm{m/s^2}12 m/s2
  5. 5.Calculate[3 marks]

    Calculate the net force on a 0.40 kg object moving at 5.0 m/s in a circle of radius 2.0 m.

    Show mark schemeHide mark scheme

    Model answer

    ac=v2r=252.0=12.5 m/s2a_c = \frac{v^2}{r} = \frac{25}{2.0} = 12.5\ \mathrm{m/s^2}ac​=rv2​=2.025​=12.5 m/s2. Then Fc=mac=(0.40)(12.5)=5.0 NF_c = ma_c = (0.40)(12.5) = 5.0\ \mathrm{N}Fc​=mac​=(0.40)(12.5)=5.0 N, toward the center.

    • 1 mark for using Fc=mv2/rF_c = mv^2/rFc​=mv2/r or F=macF = ma_cF=mac​
    • 1 mark for calculating ac=12.5 m/s2a_c = 12.5\ \mathrm{m/s^2}ac​=12.5 m/s2 or substituting correctly
    • 1 mark for obtaining 5.0 N
  6. 6.Predict[2 marks]

    Predict how the net force needed for circular motion changes when the speed doubles and the radius stays the same.

    Show mark schemeHide mark scheme

    Model answer

    The net force is proportional to v2v^2v2, so doubling the speed makes the net force four times larger.

    • 1 mark for stating that the force is proportional to the square of the speed
    • 1 mark for concluding that the force becomes four times larger

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Calculate[1 mark]

Calculate the centripetal acceleration of an object moving at 4.0 m/s in a circle of radius 2.0 m.
Show answer and explanation

Answer: C · Worked explanation

Use ac=v2/r=(4.0)2/2.0=16/2.0=8.0 m/s2a_c = v^2/r = (4.0)^2/2.0 = 16/2.0 = 8.0\ \mathrm{m/s^2}ac​=v2/r=(4.0)2/2.0=16/2.0=8.0 m/s2. Dividing speed by radius gives 2.0, which skips the square. The value 32 multiplies v2v^2v2 by rrr instead of dividing. Check that the units come out as meters per second squared.
4.

Medium·Calculate[2 marks]

A 0.50 kg ball moves at 3.0 m/s in a circle of radius 1.5 m. Calculate the net force on the ball.
Show answer and explanation

Answer: D · Worked explanation

Use Fc=mv2/r=(0.50)(3.0)2/1.5=4.5/1.5=3.0F_c = mv^2/r = (0.50)(3.0)^2/1.5 = 4.5/1.5 = 3.0Fc​=mv2/r=(0.50)(3.0)2/1.5=4.5/1.5=3.0 N. The value 4.5 N is mv2mv^2mv2 and leaves out the division by the radius. The value 1.0 N uses vvv instead of v2v^2v2. Check that the units reduce to newtons.
5.

Medium·Calculate[2 marks]

A car needs a net inward force of 2000 N to round a flat curve at 10 m/s. Calculate the required force at 20 m/s on the same curve.
Show answer and explanation

Answer: A · Worked explanation

The required force is proportional to v2v^2v2. Doubling the speed multiplies it by 22=42^2 = 422=4, so the force is 4×2000=80004\times2000 = 80004×2000=8000 N. The value 4000 N assumes the force is proportional to the speed instead of its square.
6.

Medium·Identify[2 marks]

A ball on a string moves in a horizontal circle on a frictionless table. Identify the force that supplies the net inward force.
Show answer and explanation

Answer: B · Worked explanation

The string is the only horizontal force on the ball, and it points toward the center. Weight and the normal force are vertical and balance each other. No outward force acts on the ball, so a centrifugal force does not appear in the analysis.
7.

Medium·Determine[2 marks]

An object in circular motion at 6.0 m/s has a centripetal acceleration of 9.0 m/s². Determine the radius of its path.
Show answer and explanation

Answer: C · Worked explanation

Rearrange ac=v2/ra_c = v^2/rac​=v2/r to get r=v2/ac=36/9.0=4.0r = v^2/a_c = 36/9.0 = 4.0r=v2/ac​=36/9.0=4.0 m. The value 0.25 m results from dividing the acceleration by v2v^2v2, which inverts the relationship. The value 54 m multiplies speed and acceleration instead.
8.

Hard·Calculate[2 marks]

A 0.40 kg object moves around a circle of radius 0.50 m with a period of 2.0 s. Calculate the net force on it.
Show answer and explanation

Answer: D · Worked explanation

The speed is v=2πr/T=2π(0.50)/2.0=1.57v = 2\pi r/T = 2\pi(0.50)/2.0 = 1.57v=2πr/T=2π(0.50)/2.0=1.57 m/s. Then Fc=mv2/r=(0.40)(2.47)/0.50=2.0F_c = mv^2/r = (0.40)(2.47)/0.50 = 2.0Fc​=mv2/r=(0.40)(2.47)/0.50=2.0 N. The value 7.9 N comes from 4π2mr4\pi^2 mr4π2mr, which omits the division by T2T^2T2.
9.

Hard·Predict[2 marks]

An object moves in a circle at constant speed. Its speed is doubled and the radius of its path is also doubled. Predict how its centripetal acceleration changes.
Show answer and explanation

Answer: A · Worked explanation

The acceleration is v2/rv^2/rv2/r. Doubling vvv multiplies it by 4, and doubling rrr divides it by 2, so the net factor is 4/2=24/2 = 24/2=2. Choosing quadruples accounts for the speed and ignores the larger radius.
10.

Hard·Explain[2 marks]

A passenger in a car turning left feels pushed toward the right-hand door. Explain this feeling.
Show answer and explanation

Answer: B · Worked explanation

By Newton's first law, the passenger's body tends to keep moving straight, while the car turns left under the door's inward push. No real outward force acts. The net force and the acceleration both point toward the center, which is the left.

Keep going

Next topic3.1 Translational kinetic energyPrevious topic2.8 Spring forces

More in Unit 2 · Force and Translational Dynamics

  1. 2.1Systems and center of massNotes · 10 questions
  2. 2.2Forces and free-body diagramsNotes · 10 questions
  3. 2.3Newton's third lawNotes · 10 questions
  4. 2.4Newton's first lawNotes · 10 questions
  5. 2.5Newton's second lawNotes · 9 questions
  6. 2.6Gravitational forceNotes · 10 questions
  7. 2.7Kinetic and static frictionNotes · 10 questions
  8. 2.8Spring forcesNotes · 10 questions
  9. 2.9Circular motionNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Constant speed in a circle still means changing velocity
  2. 2Acceleration points toward the center of the circle
  3. 3A net force toward the center causes the acceleration
  4. 4Speed and radius determine the acceleration and force
  5. 5Solve circular motion problems by summing inward forces
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe