Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Statistics
  3. ›1 Exploring One-Variable Data and Collecting Data
  4. ›1.9 Comparing distributions

AP Statistics · Unit 1 · Exploring One-Variable Data and Collecting Data

1.9 Comparing distributions

Compare two or more distributions using center, spread, and shape, and support each comparison with graphs and statistics.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A fair comparison describes the same features for every group
  1. 1A fair comparison describes the same features for every group
  2. 2Resistant statistics suit skewed data or data with outliers
  3. 3Graphs on a common scale make differences easy to see
  4. 4A strong comparison states each feature with numbers and context
  5. 5Comparative language and context turn numbers into conclusions
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A fair comparison describes the same features for every group

Suppose two classes take the same quiz and you want to know which did better. Saying one class has “higher” scores is too vague. A comparison needs specific features, described for both groups.

Three features matter. The center of a distribution is a typical value, such as the mean or median. The spread is how much the values vary. The shape is the overall pattern, such as symmetric or skewed.

Also look for outliers, which are values far from the rest of the data. Mention them separately, because they can change how you read a distribution.

Common mistake

Do not compare centers alone. Two groups can share the same center and still differ greatly in spread.

Key terms · tap one for its definition

center

The center of a distribution is a typical or middle value, summarized by its mean or its median.

spread

The spread of a distribution is how much its values vary, measured by the standard deviation, the IQR, or the range.

shape

The shape of a distribution is its overall pattern, including symmetry or skewness, peaks, gaps, and outliers.

Part 1 done

2

Part 2 of 5: Resistant statistics suit skewed data or data with outliers

Once you know what to compare, you must choose statistics to measure each feature. A resistant statistic changes very little when outliers are present. The median and the interquartile range (IQR) are resistant.

The IQR is the distance from the first quartile to the third quartile. The mean and standard deviation are not resistant, because every value affects them. One extreme value can pull both far from where most of the data lie.

Choosing statistics for a comparison

DistributionCenterSpread
Roughly symmetric, no outliersMeanStandard deviation
Skewed, or has outliersMedianIQR
Distribution
Roughly symmetric, no outliers
Center
Mean
Spread
Standard deviation
Distribution
Skewed, or has outliers
Center
Median
Spread
IQR

Use the same statistics for both groups. If either group is skewed, use the median and IQR for each.

Key term

resistant statistic

A resistant statistic is a numerical summary that changes very little when outliers are added or removed.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the three features used to compare distributions.
Show answer and explanation

Answer: A · Worked explanation

A comparison describes the center, spread, and shape of each group, and it also mentions any outliers. Mean, standard deviation, and IQR cover only center and spread, so they leave out shape. Minimum, median, and maximum are summary values, not the three features used for comparison.
3

Part 3 of 5: Graphs on a common scale make differences easy to see

Numbers describe features, but graphs show the whole distribution. Side-by-side boxplots place each group’s boxplot on one shared scale. Dotplots and histograms can also be stacked on a common axis.

Always use the same scale for every group. Different scales can make similar groups look different.

Figure 1. Both classes have the same median, but Class B has a longer box and wider whiskers.

In the figure, the line inside each box marks the median. The length of each box is the IQR. The whiskers show how far the data extend, apart from any outliers. Read the center, spread, and shape from the picture before you write any sentences.

Key term

side-by-side boxplots

Side-by-side boxplots are boxplots for several groups drawn on one numerical axis so their features can be compared directly.

Part 3 done

4

Part 4 of 5: A strong comparison states each feature with numbers and context

Now put the pieces together in one complete comparison. The example below compares commute times for two groups of students. Choose statistics that fit the shapes first, then write sentences that link the groups.

Worked example

Comparing commute times

Students travel to school by bus or by bike. The 40 bus riders have a median commute of 28 minutes and an IQR of 12 minutes. Their times are skewed right, with one outlier at 75 minutes. The 35 bike riders have a median of 20 minutes and an IQR of 6 minutes. Their times are roughly symmetric with no outliers. Compare the two distributions.
  1. 1
    The bus data are skewed with an outlier, so use the median and IQR for both groups.
  2. 2
    Center: the bus median of 28 minutes is 8 minutes more than the bike median of 20 minutes.
  3. 3
    Spread: the bus IQR of 12 minutes is twice the bike IQR of 6 minutes.
  4. 4
    Shape: bus times are skewed right with an outlier at 75 minutes. Bike times are roughly symmetric with no outliers.
  5. 5
    Write the results as sentences that name both groups and use comparison words.

Answer: Bus riders typically take longer than bike riders (median 28 minutes versus 20 minutes). Bus times also vary more (IQR 12 minutes versus 6 minutes). Bus times are skewed right with an outlier at 75 minutes, whereas bike times are roughly symmetric with no outliers.

Each sentence in the answer names both groups and uses a comparison word, such as “longer” or “more.” It gives numbers with units, because a number without a unit has no meaning.

Work through the features in the same order each time: center, then spread, then shape. This keeps the comparison organized and makes it easy to check that nothing is missing.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the pair of statistics that are both resistant to outliers.
Show answer and explanation

Answer: A · Worked explanation

The median and IQR depend on positions in the ordered data, so extreme values change them very little. The mean and standard deviation use every value, so one extreme value can pull both far away. A pair that mixes one of each is only partly resistant.
5

Part 5 of 5: Comparative language and context turn numbers into conclusions

A common error is describing each group separately and never linking them. A complete comparison is more than two lists of facts. Use this checklist every time.

  • Name both groups in the same sentence.
  • Use comparison words such as greater than, less than, or whereas.
  • Give values and units for center and spread.
  • Describe shape and mention any outliers.
  • Refer to the context of the data.

Exam tip

A sentence that gives two medians without saying which is larger is incomplete. Add the comparison word and the context.

Go deeperComparing groups of different sizes

Suppose one group has 20 individuals and another has 80. Histograms of counts make the larger group look taller in every bar, even when the shapes match.

Use relative frequencies, which are percentages of each group, to put the histograms on the same footing. Boxplots and the statistics in this note already adjust for group size.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[2 marks]

    Identify the resistant statistic used to describe center and the resistant statistic used to describe spread.

    Show mark schemeHide mark scheme

    Model answer

    The median is the resistant measure of center, and the IQR is the resistant measure of spread.

    • 1 mark for naming the median as the resistant measure of center
    • 1 mark for naming the IQR as the resistant measure of spread
  2. 2.Explain[2 marks]

    Explain why the median and IQR are better choices than the mean and standard deviation for a distribution with outliers.

    Show mark schemeHide mark scheme

    Model answer

    Outliers strongly affect the mean and standard deviation because every value is used in them. The median and IQR change very little, so they describe the typical values better.

    • 1 mark for stating that outliers strongly affect the mean and standard deviation
    • 1 mark for stating that the median and IQR are resistant and describe the typical values better
  3. 3.Describe[3 marks]

    Describe what a complete comparison of two distributions should include.

    Show mark schemeHide mark scheme

    Model answer

    It compares the centers and the spreads of the two groups using values with units. It also compares shapes and mentions any outliers. It uses comparison words and refers to the context.

    • 1 mark for comparing the centers of the groups using values with units
    • 1 mark for comparing the spreads of the groups
    • 1 mark for comparing the shapes, mentioning any outliers, and using comparison words and context
  4. 4.Justify[3 marks]

    A teacher says two classes did equally well because both have a median score of 74 points. Class X has an IQR of 10 points and Class Y has an IQR of 22 points. Justify why the teacher’s claim is incomplete.

    Show mark schemeHide mark scheme

    Model answer

    The medians show the typical scores are about the same. However, Class Y has a much larger IQR, so its scores vary more than Class X. A full comparison must include spread, so saying they did equally well ignores this difference.

    • 1 mark for stating that the centers are the same
    • 1 mark for stating that Class Y has the larger spread (IQR 22 versus 10 points)
    • 1 mark for concluding that a complete comparison must include spread, not center alone
  5. 5.Calculate[2 marks]

    Calculate the IQR of a group whose first quartile is 34 minutes and whose third quartile is 52 minutes.

    Show mark schemeHide mark scheme

    Model answer

    IQR = third quartile − first quartile = 52−34=1852-34=1852−34=18 minutes.

    • 1 mark for subtracting the first quartile from the third quartile
    • 1 mark for giving the answer as 18 minutes

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the statement that is a proper comparison of two groups.
Show answer and explanation

Answer: A · Worked explanation

The correct statement names both clinics, uses the comparison word longer, and gives matching statistics with units. The statements that describe only one clinic do not compare anything. Giving a median for one clinic and an IQR for the other cannot be compared, because the statistics measure different features.
4.

Medium·Interpret[1 mark]

Group P and Group Q both have a median test score of 40 points. Group P has an IQR of 8 points, and Group Q has an IQR of 20 points. Which conclusion is best supported?
Show answer and explanation

Answer: A · Worked explanation

Equal medians mean the centers match, while the larger IQR shows that Group Q’s scores are more spread out. The IQR measures spread, not how high the scores are, so a larger or smaller IQR does not mean a higher score. Equal medians alone do not make two distributions the same.
5.

Medium·Calculate[1 mark]

Group A has a first quartile of 14 points and a third quartile of 20 points. Group B has a first quartile of 11 points and a third quartile of 25 points. Calculate how much larger the IQR of Group B is than the IQR of Group A.
Show answer and explanation

Answer: A · Worked explanation

The IQR of Group A is 20−14=620-14=620−14=6 points. The IQR of Group B is 25−11=1425-11=1425−11=14 points. The difference is 14−6=814-6=814−6=8 points. The value 14 points is only the IQR of Group B, and 5 points comes from comparing the third quartiles instead of the IQRs.
6.

Medium·Interpret[1 mark]

Clinic 1 has a mean wait of 34 minutes and a median wait of 22 minutes. Clinic 2 has a mean wait of 24 minutes and a median wait of 23 minutes. Which description is best?
Show answer and explanation

Answer: A · Worked explanation

A mean well above the median suggests a few very long waits pulling the mean up, which is a right skew. The median is then the better center. The typical waits are about equal, 22 and 23 minutes, so the larger mean does not mean longer typical waits. Close medians do not show matching shapes.
7.

Medium[1 mark]

One class has 20 students and another has 80. Histograms of counts make the larger class look taller everywhere. Which approach gives a fair comparison of the shapes?
Show answer and explanation

Answer: A · Worked explanation

Relative frequencies show the percentage of each class in each bar, so groups of different sizes can be compared on the same footing. Taller count bars reflect group size, not a larger center. Comparing only the tallest bar ignores the rest of the shape, and combining the classes hides the difference between them.
8.

Hard·Explain[2 marks]

Two boxplots use the same scale. The box for Group A is twice as long as the box for Group B. A student concludes that Group A has twice as many data values. Which response is correct?
Show answer and explanation

Answer: A · Worked explanation

In every boxplot, the box holds about the middle half of that group’s data, whatever the group size. Its length is the IQR, which measures spread. Box length does not reveal how many values there are, and the median is shown by the line inside the box, not by the length.
9.

Hard·Justify[2 marks]

Group M is roughly symmetric with no outliers. Group N is skewed right with several outliers. Which plan gives the most appropriate comparison?
Show answer and explanation

Answer: A · Worked explanation

The same statistics must be used for both groups, and skewness with outliers calls for the resistant median and IQR. Using different statistics for each group makes the comparison unfair, which is why the mixed plan fails. The range is not resistant, because one outlier changes the maximum or minimum and so changes the range.
10.

Hard·Calculate[2 marks]

Data set 1 is 4, 5, 6, 7, 8. In data set 2, the value 8 is replaced by 48. How do the mean and median change?
Show answer and explanation

Answer: A · Worked explanation

The original mean is 305=6\frac{30}{5}=6530​=6. The new total is 70, so the new mean is 705=14\frac{70}{5}=14570​=14, an increase of 8. The ordered values 4, 5, 6, 7, 48 still have median 6. The increase of 40 is the change in the total, not in the mean, which is divided by 5.

Keep going

Next topic1.10 Investigative questions and data collectionPrevious topic1.8 Boxplots and summary graphs

More in Unit 1 · Exploring One-Variable Data and Collecting Data

  1. 1.5One quantitative variable: graphsNotes · 10 questions
  2. 1.6Describing a distributionNotes · 10 questions
  3. 1.7Summary statisticsNotes · 10 questions
  4. 1.8Boxplots and summary graphsNotes · 10 questions
  5. 1.9Comparing distributionsNotes · 10 questions
  6. 1.10Investigative questions and data collectionNotes · 10 questions
  7. 1.11Random samplingNotes · 10 questions
  8. 1.12Problems with samplingNotes · 10 questions
  9. 1.13Experimental designNotes · 10 questions

All AP Statistics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1A fair comparison describes the same features for every group
  2. 2Resistant statistics suit skewed data or data with outliers
  3. 3Graphs on a common scale make differences easy to see
  4. 4A strong comparison states each feature with numbers and context
  5. 5Comparative language and context turn numbers into conclusions
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe