AQA A-level Biology · Section 3.1 · Biological molecules
3.1.2 Carbohydrates
Describe carbohydrate structures, explain glycosidic bonds, compare polysaccharides, and test for reducing sugars.
1/5Glucose has several forms with different arrangements
- Glucose has several forms with different arrangements
- Condensation joins sugars through glycosidic bonds
- Starch and glycogen store glucose in compact forms
- Cellulose chains form strong plant cell walls
- Benedict's test distinguishes reducing from non-reducing sugars
- Check your recall
- Practice: 10 questions
Part 1 of 5: Glucose has several forms with different arrangements
Glucose is a six-carbon monosaccharide with the formula . Its ring form contains five carbon atoms and one oxygen atom. The remaining carbon sits outside the ring. In α-glucose, the hydroxyl group on carbon 1 points below the ring. In β-glucose, it points above the ring. These forms differ only in the position of that group.
Other isomers have the same molecular formula but different structures. Fructose and galactose are isomers of glucose. Their different arrangements matter because bond formation depends on the positions of chemical groups.
Key terms · tap one for its definition
Glucose
Glucose is a six-carbon monosaccharide with the molecular formula .
α-glucose
α-Glucose has its carbon 1 hydroxyl group below the ring in the standard ring drawing.
β-glucose
β-Glucose has its carbon 1 hydroxyl group above the ring in the standard ring drawing.
isomers
Isomers have the same molecular formula but different arrangements of atoms.
Part 2 of 5: Condensation joins sugars through glycosidic bonds
A condensation reaction joins two monosaccharides and releases one water molecule. It forms a glycosidic bond between the sugars. Two joined monosaccharides make a disaccharide. For example, two α-glucose molecules can join to form maltose. Glucose and fructose can join to form sucrose.
Repeated condensation reactions build polysaccharides, such as starch, glycogen and cellulose. The type of glucose and the positions joined affect each polymer's shape. Hydrolysis reverses bond formation: a water molecule is used to break a glycosidic bond. This releases smaller sugars, which can be used or transported.
Key terms · tap one for its definition
condensation reaction
A condensation reaction joins molecules by forming a bond and releasing a water molecule.
glycosidic bond
A glycosidic bond joins sugar units through an oxygen atom.
disaccharide
A disaccharide consists of two monosaccharides joined by a glycosidic bond.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: C · Worked explanation
Part 3 of 5: Starch and glycogen store glucose in compact forms
Starch is a plant glucose store made from α-glucose. It contains amylose and amylopectin. Amylose has α-1,4 glycosidic bonds and coils into a compact shape. Amylopectin also has α-1,6 bonds, which form branches. Branch ends provide several sites where enzymes can release glucose.
Glycogen is the glucose store in animals and fungi. Like amylopectin, it has α-1,4 bonds and α-1,6 branches. It is more highly branched, providing many ends for rapid glucose release. Both starch and glycogen are large and insoluble. They therefore remain stored without greatly affecting the cell's water potential.
Key terms · tap one for its definition
Starch
Starch is a plant storage polysaccharide containing amylose and amylopectin, both made from α-glucose.
Amylose
Amylose is an unbranched starch molecule with α-1,4 glycosidic bonds and a coiled shape.
Amylopectin
Amylopectin is a branched starch molecule with α-1,4 bonds along chains and α-1,6 bonds at branches.
Glycogen
Glycogen is a highly branched α-glucose storage polysaccharide found in animals and fungi.
Part 4 of 5: Cellulose chains form strong plant cell walls
Cellulose is built from β-glucose, joined by β-1,4 glycosidic bonds. Alternate glucose units turn through 180°, producing long, straight chains. Hydrogen bonds form between neighbouring chains. Many chains group into microfibrils, which give plant cell walls tensile strength. Cellulose supports cells rather than storing glucose.
Starch and glycogen contain α-glucose and serve as energy stores. Cellulose contains β-glucose and provides structural support. The difference in glucose form changes how their chains are arranged. Humans can digest starch and glycogen but lack the enzyme needed to hydrolyse cellulose's β-1,4 bonds.
Key terms · tap one for its definition
Cellulose
Cellulose is a structural polysaccharide of β-glucose with β-1,4 glycosidic bonds.
microfibrils
Microfibrils are bundles of cellulose chains held together by hydrogen bonds.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: D · Worked explanation
Part 5 of 5: Benedict's test distinguishes reducing from non-reducing sugars
A reducing sugar changes blue Benedict's reagent when heated with it. The mixture may become green, yellow, orange or brick-red. A brick-red precipitate gives a clear positive result. Glucose and maltose are reducing sugars; sucrose is a non-reducing sugar.
- Add Benedict's reagent to the sample and heat it in a hot water bath.
- If it stays blue, heat a fresh sample with dilute hydrochloric acid.
- Cool, then neutralise the acid with sodium hydrogen carbonate.
- Add fresh Benedict's reagent and heat again in a hot water bath.
Acid hydrolysis splits a non-reducing sugar into smaller sugars. A positive result only after hydrolysis indicates a non-reducing sugar was present.
Key terms · tap one for its definition
reducing sugar
A reducing sugar gives a positive Benedict's test when heated with the reagent.
non-reducing sugar
A non-reducing sugar does not give a positive Benedict's test until it is hydrolysed.
Check your recall[17 marks]
5 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Describe[2 marks]
Describe how α-glucose and β-glucose differ.
Show mark schemeHide mark scheme
Model answer
They differ in the position of the hydroxyl group on carbon 1. It points below the ring in α-glucose and above it in β-glucose.
- 1 mark for identifying the hydroxyl group on carbon 1 as the difference
- 1 mark for stating that it points below the ring in α-glucose and above it in β-glucose
- 2.Explain[3 marks]
Explain how two glucose molecules form a disaccharide.
Show mark schemeHide mark scheme
Model answer
A condensation reaction joins the glucose molecules. It forms a glycosidic bond and releases one water molecule.
- 1 mark for identifying the reaction as condensation
- 1 mark for stating that a glycosidic bond forms between the glucose molecules
- 1 mark for stating that one water molecule is released
- 3.Compare[5 marks]
Compare the structures and functions of starch, glycogen and cellulose.
Show mark schemeHide mark scheme
Model answer
Starch and glycogen contain α-glucose and store glucose. Starch contains coiled amylose and branched amylopectin. Glycogen is more highly branched than amylopectin. Cellulose contains β-glucose in straight chains. Hydrogen bonds link its chains into strong microfibrils, which support plant cell walls.
- 1 mark for stating that starch and glycogen are made from α-glucose
- 1 mark for stating that starch and glycogen store glucose
- 1 mark for describing starch as containing coiled amylose and branched amylopectin
- 1 mark for stating that glycogen is more highly branched than amylopectin
- 1 mark for linking β-glucose cellulose chains and hydrogen-bonded microfibrils to cell wall support
- 4.Describe[4 marks]
Describe how to test a sample for a non-reducing sugar after an initial negative Benedict's test.
Show mark schemeHide mark scheme
Model answer
Heat a fresh sample with dilute hydrochloric acid to hydrolyse the sugar. Cool it and neutralise it with sodium hydrogen carbonate. Add fresh Benedict's reagent and heat in a hot water bath. A change from blue to green, yellow, orange or brick-red indicates a non-reducing sugar was present.
- 1 mark for heating a fresh sample with dilute hydrochloric acid
- 1 mark for cooling and neutralising it with sodium hydrogen carbonate
- 1 mark for adding fresh Benedict's reagent and heating in a hot water bath
- 1 mark for interpreting a positive colour change after hydrolysis as evidence of a non-reducing sugar
- 5.Explain[3 marks]
Explain why glycogen can release glucose rapidly and remain stored in cells.
Show mark schemeHide mark scheme
Model answer
Its many branches provide numerous ends where enzymes can release glucose. Glycogen is large and insoluble, so it remains stored without greatly affecting water potential.
- 1 mark for stating that glycogen has many branches
- 1 mark for linking branch ends to rapid enzyme-catalysed glucose release
- 1 mark for linking its large, insoluble structure to storage without greatly affecting water potential

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyIdentify[1 mark]
Show answer and explanation
Answer: C · Worked explanation
EasyIdentify[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumDeduce[1 mark]
Show answer and explanation
Answer: C · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: A · Worked explanation
MediumCompare[2 marks]
Show answer and explanation
Answer: A · Worked explanation
MediumDetermine[2 marks]
Show answer and explanation
Answer: C · Worked explanation
MediumExplain[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardDeduce[2 marks]
Show answer and explanation
Answer: D · Worked explanation