Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Biology
  3. ›3.8 Control of gene expression
  4. ›3.8.4 Gene technologies

AQA A-level Biology · Section 3.8 · Control of gene expression

3.8.4 Gene technologies

Explain how gene technologies locate, copy and alter DNA, interpret gel results, and describe medical uses.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5DNA probes locate genes through complementary base pairing
  1. 1DNA probes locate genes through complementary base pairing
  2. 2PCR repeatedly copies a chosen DNA region
  3. 3Restriction enzymes cut DNA at specific sequences
  4. 4Gel electrophoresis separates DNA fragments by size
  5. 5Gene technologies support diagnosis and treatment
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: DNA probes locate genes through complementary base pairing

A DNA probe is a short, single-stranded DNA sequence with a detectable label. Its bases are complementary to part of the gene being sought. The sample DNA is separated into single strands. The probe is then added and allowed to bind to its complementary sequence. This binding is called hybridisation. Unbound probe is washed away, leaving a detectable signal where the target sequence is present.

A probe can locate a gene within separated DNA fragments. A positive signal shows that a fragment contains the sequence recognised by the probe. It does not, by itself, show whether the gene works normally.

Common mistake

A probe does not find a gene by recognising its protein. It binds directly to a complementary DNA sequence.

Key terms · tap one for its definition

DNA probe

A DNA probe is a labelled, single-stranded DNA sequence used to detect a complementary target sequence.

hybridisation

Hybridisation is the binding of complementary single strands of nucleic acid through base pairing.

Part 1 done

2

Part 2 of 5: PCR repeatedly copies a chosen DNA region

Polymerase chain reaction (PCR) makes many copies of a selected DNA region. Two primers bind on opposite strands, either side of that region. They provide starting points for a heat-stable DNA polymerase. The reaction also needs free DNA nucleotides and a suitable buffer.

  • Heat separates the two DNA strands.
  • Cooling allows primers to bind to complementary sequences.
  • Polymerase extends the primers, making new strands.

Repeating these temperature changes increases the number of target copies. The copied region becomes abundant because newly made strands also act as templates.

Exam tip

When explaining PCR, name both primers and the heat-stable polymerase. Link each temperature stage to its purpose.

Key terms · tap one for its definition

Polymerase chain reaction

Polymerase chain reaction is a method that repeatedly copies a selected DNA region using temperature cycles.

primers

Primers are short DNA strands that bind to templates and provide starting points for DNA synthesis.

DNA polymerase

DNA polymerase builds a new DNA strand by adding nucleotides to a primer.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the feature that allows a DNA probe to bind to its target gene.
Show answer and explanation

Answer: A · Worked explanation

A probe binds to its target by complementary base pairing, so its sequence is chosen to match a sequence within the gene. A sequence identical to the target would not form the required complementary pairs. The probe is labelled so that its location can be detected.
3

Part 3 of 5: Restriction enzymes cut DNA at specific sequences

A restriction enzyme cuts DNA at a particular recognition sequence. Different enzymes recognise different sequences. Some cuts leave short, single-stranded sticky ends. Complementary sticky ends can pair, helping a DNA fragment join to a cut vector, such as a plasmid. DNA ligase then seals the sugar–phosphate backbone. The resulting recombinant DNA can be introduced into a suitable host cell.

Cutting the desired fragment and vector with the same enzyme can produce compatible ends. However, joining does not guarantee that every vector contains the desired fragment. Cells carrying the intended recombinant DNA must be identified.

Common mistake

Restriction enzymes cut DNA. DNA ligase joins fragments by forming bonds in the backbone.

Key terms · tap one for its definition

restriction enzyme

A restriction enzyme cuts DNA at or near a specific recognition sequence.

sticky ends

Sticky ends are short, single-stranded DNA overhangs that can pair with complementary overhangs.

vector

A vector carries introduced DNA into a host cell.

Part 3 done

4

Part 4 of 5: Gel electrophoresis separates DNA fragments by size

In gel electrophoresis, DNA samples are placed in wells near the negative electrode. DNA moves towards the positive electrode because its phosphate groups carry negative charge. Smaller fragments usually travel further through the gel than larger fragments. A DNA ladder contains fragments of known sizes. Comparing sample bands with its bands gives an estimate of fragment size.

Figure 1. Compare each sample band with the ladder. Smaller fragments have travelled further from the wells.

Worked example

Interpreting a restriction digest

An uncut DNA sample shows one 5 kb band. After digestion, it shows bands at 3 kb and 2 kb. What do these results suggest?
  1. 1
    Read the two digested fragment sizes: 3 kb and 2 kb.
  2. 2
    Add their lengths: 3+2=5 kb3+2=5\,\mathrm{kb}3+2=5kb.
  3. 3
    Compare the total with the uncut sample: both are 5 kb.

Answer: The results are consistent with one cut in a 5 kb linear DNA molecule, producing 3 kb and 2 kb fragments.

Exam tip

State which lane or band you used as evidence. Bands at matching positions indicate similar fragment lengths, not necessarily identical sequences.

Key terms · tap one for its definition

gel electrophoresis

Gel electrophoresis separates DNA fragments as they move through a gel in an electric field.

DNA ladder

A DNA ladder is a mixture of fragments with known lengths used to estimate sample fragment sizes.

Part 4 done

Quick check

One question on the part you just read

Easy

State the role of primers in a PCR reaction.
Show answer and explanation

Answer: C · Worked explanation

Primers bind to complementary sequences at either end of the target region and provide starting points for DNA polymerase. Heating separates the DNA strands; primers do not do this. Joining DNA fragments is the role of DNA ligase, not primers.
5

Part 5 of 5: Gene technologies support diagnosis and treatment

DNA probes can test whether a sample contains a particular disease-associated sequence. PCR can amplify a small sample before analysis. Together, these methods can help identify an inherited variant or detect genetic material from a pathogen. A positive result needs careful interpretation: detecting a sequence does not always establish that someone has a disease.

Recombinant DNA technology can place a human gene into suitable cells. These cells can produce a useful protein, which is then purified for treatment. Gene therapy aims to treat disease by adding, replacing or altering genetic material in a patient’s cells. Its success depends on delivery to suitable cells and control of the resulting gene activity.

Key terms · tap one for its definition

Recombinant DNA

Recombinant DNA contains DNA joined from different sources.

Gene therapy

Gene therapy treats disease by adding, replacing or altering genetic material in a patient’s cells.

Note read

Check your recall[15 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain how a labelled DNA probe locates a target sequence in a sample.

    Show mark schemeHide mark scheme

    Model answer

    The probe has bases complementary to the target sequence. It hybridises with single-stranded sample DNA. Unbound probe is removed, so its label shows where the target sequence is present.

    • 1 mark for stating that the probe is complementary to the target sequence
    • 1 mark for explaining that the probe hybridises with single-stranded sample DNA
    • 1 mark for explaining that removing unbound probe leaves a detectable label at the target
  2. 2.Explain[4 marks]

    Explain the roles of temperature changes, primers and polymerase in PCR.

    Show mark schemeHide mark scheme

    Model answer

    Heating separates the DNA strands. Cooling allows primers to bind beside the target region. Heat-stable DNA polymerase extends the primers to make new strands. Repeated cycles copy the target region many times.

    • 1 mark for stating that heating separates the DNA strands
    • 1 mark for stating that cooling allows primers to bind
    • 1 mark for explaining that heat-stable DNA polymerase extends the primers
    • 1 mark for explaining that repeating the cycle increases copies of the target region
  3. 3.Explain[3 marks]

    Explain how a restriction enzyme and DNA ligase help make recombinant DNA.

    Show mark schemeHide mark scheme

    Model answer

    A restriction enzyme cuts DNA at a specific recognition sequence. Compatible ends on the desired fragment and vector can pair. DNA ligase seals the backbone to join the fragments.

    • 1 mark for stating that the restriction enzyme cuts at a specific recognition sequence
    • 1 mark for explaining that compatible ends on the fragment and vector can pair
    • 1 mark for stating that DNA ligase seals the sugar–phosphate backbone
  4. 4.Determine[2 marks]

    Determine what is suggested when a 5 kb linear DNA sample gives 3 kb and 2 kb bands after digestion.

    Show mark schemeHide mark scheme

    Model answer

    The fragment lengths total 3+2=5 kb3+2=5\,\mathrm{kb}3+2=5kb. This is consistent with one cut in the linear DNA molecule.

    • 1 mark for adding the fragment lengths to obtain 5 kb
    • 1 mark for identifying one cut in the linear DNA molecule as consistent with the result
  5. 5.Explain[3 marks]

    Explain two medical uses of gene technologies and one limit of a positive DNA test.

    Show mark schemeHide mark scheme

    Model answer

    PCR can amplify a small sample to help detect a pathogen’s genetic material. Recombinant DNA technology can produce a human protein for treatment. A positive DNA test does not always establish that someone has a disease.

    • 1 mark for explaining a diagnostic use of PCR or a DNA probe
    • 1 mark for explaining a treatment use of recombinant DNA technology or gene therapy
    • 1 mark for stating that detecting a sequence does not always establish disease

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the function of a restriction enzyme in genetic engineering.
Show answer and explanation

Answer: D · Worked explanation

A restriction enzyme recognises a particular base sequence and cuts DNA at or near that site. DNA ligase joins DNA fragments, while DNA polymerase copies DNA. A vector, such as a plasmid, can carry a gene into a recipient cell.
4.

Easy·State[1 mark]

State why DNA fragments move towards the positive electrode during gel electrophoresis.
Show answer and explanation

Answer: D · Worked explanation

The phosphate groups in DNA give it an overall negative charge, so an electric field draws the fragments towards the positive electrode. The phosphate backbone is not positively charged. The gel separates fragments by their movement through its pores rather than by converting their charge.
5.

Medium·Explain[2 marks]

A labelled DNA probe is used to test a sample for a particular gene. Explain why the sample DNA is heated before the probe is added.
Show answer and explanation

Answer: A · Worked explanation

Heating breaks the hydrogen bonds between the two DNA strands, exposing bases that can pair with the probe. The probe's sequence is already designed to be complementary; heating does not alter it or label the target. Cutting DNA at a recognition sequence is carried out by a restriction enzyme.
6.

Medium·Calculate[2 marks]

A PCR reaction starts with 4 copies of a target DNA sequence. Assuming the amount doubles during each cycle, calculate the number of copies after 6 cycles.
Show answer and explanation

Answer: C · Worked explanation

After six cycles, the number of copies is 4×26=2564 \times 2^6 = 2564×26=256.
7.

Medium·Explain[2 marks]

A gene and a plasmid are cut using the same restriction enzyme. Explain why this can help produce a recombinant plasmid.
Show answer and explanation

Answer: A · Worked explanation

Using the same restriction enzyme can leave complementary sticky ends on the gene and plasmid, which can pair by complementary base pairing. DNA ligase then forms covalent bonds in the sugar-phosphate backbone to join them. The restriction enzyme does not copy or seal DNA, and a plasmid generally needs to enter a suitable cell to be replicated.
8.

Medium·Determine[2 marks]

In a gel electrophoresis run, three DNA fragments have lengths of 900, 500 and 200 base pairs. Which fragment is expected to travel furthest from the wells?
Show answer and explanation

Answer: C · Worked explanation

The 200-base-pair fragment is the smallest, so it passes through the pores in the gel more easily and travels furthest from the wells. Although all three fragments have a negative charge, the gel separates them mainly according to size. The largest fragment is impeded most strongly.
9.

Medium·Outline[2 marks]

Outline how a genetically engineered microorganism can be used to produce a human protein for medical use.
Show answer and explanation

Answer: D · Worked explanation

A human gene can be inserted into a vector and transferred into a microorganism, which is then cultured so that it expresses the gene and produces the protein. The protein can be collected and purified for medical use. Restriction enzymes cut DNA; they do not translate genes, and exposing cells to a protein does not make them copy its gene.
10.

Hard·Determine[2 marks]

A PCR mixture contains 3 copies of a target sequence. Assuming perfect doubling in every cycle, determine how many copies are present after 10 cycles.
Show answer and explanation

Answer: C · Worked explanation

After 10 cycles, the number of copies is 3×210=3,0723 \times 2^{10} = 3,0723×210=3,072.

Keep going

Previous topic3.8.3 Genome projects

More in Section 3.8 · Control of gene expression

  1. 3.8.1Mutations and protein functionNotes · 10 questions
  2. 3.8.2Regulation of gene expressionNotes · 10 questions
  3. 3.8.3Genome projectsNotes · 10 questions
  4. 3.8.4Gene technologiesNotes · 10 questions

All AQA A-level Biology topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1DNA probes locate genes through complementary base pairing
  2. 2PCR repeatedly copies a chosen DNA region
  3. 3Restriction enzymes cut DNA at specific sequences
  4. 4Gel electrophoresis separates DNA fragments by size
  5. 5Gene technologies support diagnosis and treatment
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe