Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.2 Particles and radiation
  4. ›3.2.1.2 Stable and unstable nuclei

AQA A-level Physics · Section 3.2 · Particles and radiation

3.2.1.2 Stable and unstable nuclei

Explain why some nuclei are stable and others unstable, describe the forces inside a nucleus, and describe alpha decay, beta-minus decay and activity.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6Stable nuclei stay unchanged and unstable nuclei emit radiation
  1. 1Stable nuclei stay unchanged and unstable nuclei emit radiation
  2. 2Two forces act on the protons inside a nucleus
  3. 3The strong nuclear force changes with the separation of particles
  4. 4Unstable nuclei decay by emitting radiation at random
  5. 5Beta-minus decay turns a neutron into a proton
  6. 6Activity measures how many nuclei decay each second
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: Stable nuclei stay unchanged and unstable nuclei emit radiation

Most atoms around you never change. Each has a nucleus, the tiny central region that holds its protons and neutrons. In most atoms the nucleus stays the same for ever.

A stable nucleus stays unchanged over time and emits no radiation. An unstable nucleus does not. Sooner or later it changes by itself and gives out radiation.

Carbon-12 is stable, but carbon-14 is unstable, even though both have six protons. The balance of forces inside each nucleus makes the difference. Those forces come next.

Key terms · tap one for its definition

nucleus

The nucleus is the small central region of an atom containing protons and neutrons.

stable nucleus

A stable nucleus is a nucleus that keeps the same numbers of protons and neutrons and does not undergo radioactive decay.

unstable nucleus

An unstable nucleus is a nucleus that will eventually undergo radioactive decay, at a time that cannot be predicted.

Part 1 done

2

Part 2 of 6: Two forces act on the protons inside a nucleus

A nucleus raises a puzzle. Every proton is positively charged, so each repels the others through the electrostatic force. Even so, many protons stay packed together in a tiny space.

Another force must hold them there. This is the strong nuclear force, an attraction between protons and neutrons. It does not depend on charge, and at nuclear distances it beats the electrostatic repulsion.

Large nuclei are harder to hold together. The repulsion acts between all the protons, but the strong nuclear force reaches only close neighbours. Very large nuclei therefore tend to be unstable.

Go deeperWhy neutrons help

Light stable nuclei have roughly equal numbers of protons and neutrons. Heavier stable nuclei need more neutrons than protons.

Neutrons add strong nuclear attraction but no electrostatic repulsion. Extra neutrons therefore help to balance the repulsion between protons, up to a limit.

Key term

strong nuclear force

The strong nuclear force is the short-range attraction between protons and neutrons that holds a nucleus together.

Part 2 done

Quick check

One question on the part you just read

Easy

State which description fits an unstable nucleus.
Show answer and explanation

Answer: A · Worked explanation

An unstable nucleus eventually changes spontaneously, with no outside trigger, and emits radiation. Having more neutrons than protons does not make a nucleus unstable, because many stable nuclei have more neutrons than protons. Collisions are not needed for decay, which is why decay is called spontaneous.
3

Part 3 of 6: The strong nuclear force changes with the separation of particles

The strong nuclear force changes as two neighbouring protons or neutrons come together. Beyond about 3 fm, where 1 fm=10−15 m1\,\mathrm{fm}=10^{-15}\,\mathrm{m}1fm=10−15m, it is almost zero. Only the electrostatic repulsion acts between protons at that distance.

From about 3 fm down to about 0.5 fm, the force is attractive. At about 0.5 fm it passes through zero. Closer than that it is repulsive, which stops the nucleus collapsing.

Figure 1. The force is repulsive at very small separations, attractive in between and almost zero beyond a few femtometres.

Exam tip

Quote the distances when you describe this force. Say ‘repulsive below about 0.5 fm’, not just ‘repulsive when close’.

Part 3 done

4

Part 4 of 6: Unstable nuclei decay by emitting radiation at random

An unstable nucleus changes into a more stable arrangement by emitting radiation. This is radioactive decay. It is spontaneous, so nothing outside the nucleus triggers it.

Decay is also random. We cannot predict when a particular nucleus will decay, only the chance that it does so in a given time.

Many heavy nuclei decay by emitting an alpha particle, which is two protons and two neutrons bound together. A nucleus is written with its nucleon number, the total of protons and neutrons, at the top. Its proton number goes at the bottom.

Worked example

Finding the nucleus left after alpha decay

Radium-226 has nucleon number 226 and proton number 88. It decays by emitting one alpha particle. Find the nucleon number and proton number of the new nucleus.
  1. 1
    An alpha particle has nucleon number 4 and proton number 2.
  2. 2
    Subtract from the nucleon number: 226−4=222226-4=222226−4=222.
  3. 3
    Subtract from the proton number: 88−2=8688-2=8688−2=86.
  4. 4
    Write the equation: 88226Ra→86222Rn+24He{}^{226}_{88}\mathrm{Ra}\rightarrow{}^{222}_{86}\mathrm{Rn}+{}^{4}_{2}\mathrm{He}88226​Ra→86222​Rn+24​He.

Answer: The new nucleus has nucleon number 222 and proton number 86.

Key terms · tap one for its definition

radioactive decay

Radioactive decay is the spontaneous change of an unstable nucleus, accompanied by the emission of radiation.

alpha particle

An alpha particle is a helium nucleus, made of two protons and two neutrons, emitted by some unstable nuclei.

Part 4 done

Quick check

One question on the part you just read

Easy

State the force that mainly holds protons and neutrons together in a nucleus.
Show answer and explanation

Answer: C · Worked explanation

The strong nuclear force is a short-range attraction between protons and neutrons. At nuclear distances it is strong enough to overcome the repulsion between protons. The electrostatic force is wrong because it pushes protons apart, so it works against stability instead of providing it.
5

Part 5 of 6: Beta-minus decay turns a neutron into a proton

Alpha decay is not the only way a nucleus changes. A nucleus with too many neutrons can turn one neutron into a proton. The fast electron it emits is a beta-minus particle.

An antineutrino is emitted as well. Beta-minus particles leave with a range of energies. If only two particles shared the energy, every electron would have the same energy. Since they do not, a third particle takes a share.

In symbols, n→p+e−+νˉe\mathrm{n}\rightarrow\mathrm{p}+\mathrm{e^-}+\bar{\nu}_\mathrm{e}n→p+e−+νˉe​. The nucleon number does not change, but the proton number rises by 1.

Alpha decay and beta-minus decay compared

FeatureAlpha decayBeta-minus decay
Particle emittedHelium nucleusElectron, with an antineutrino
Change in nucleusLoses 2 protons and 2 neutronsOne neutron becomes a proton
Nucleon numberFalls by 4Unchanged
Proton numberFalls by 2Rises by 1
Feature
Particle emitted
Alpha decay
Helium nucleus
Beta-minus decay
Electron, with an antineutrino
Feature
Change in nucleus
Alpha decay
Loses 2 protons and 2 neutrons
Beta-minus decay
One neutron becomes a proton
Feature
Nucleon number
Alpha decay
Falls by 4
Beta-minus decay
Unchanged
Feature
Proton number
Alpha decay
Falls by 2
Beta-minus decay
Rises by 1

Key terms · tap one for its definition

beta-minus particle

A beta-minus particle is a fast electron emitted from a nucleus when a neutron changes into a proton.

antineutrino

An antineutrino is the neutral antiparticle of the neutrino, emitted together with the electron in beta-minus decay.

Part 5 done

6

Part 6 of 6: Activity measures how many nuclei decay each second

A sample holds vast numbers of unstable nuclei, and each decays at random. We still need one measure of how fast the whole sample is decaying. That measure is its activity.

Activity is the number of decays each second. One decay per second is one becquerel, symbol Bq\mathrm{Bq}Bq, so 1 Bq=1 s−11\,\mathrm{Bq}=1\,\mathrm{s^{-1}}1Bq=1s−1. In symbols, A=ΔNΔtA=\frac{\Delta N}{\Delta t}A=ΔtΔN​, where ΔN\Delta NΔN is the number of decays in time Δt\Delta tΔt.

Worked example

Calculating activity

A radioactive sample undergoes 4.5×1044.5\times10^{4}4.5×104 decays in 30 s. Calculate its activity.
  1. 1
    Activity equals the number of decays divided by the time taken.
  2. 2
    In symbols, A=ΔNΔtA=\frac{\Delta N}{\Delta t}A=ΔtΔN​.
  3. 3
    Substitute: A=4.5×10430 sA=\frac{4.5\times10^{4}}{30\,\mathrm{s}}A=30s4.5×104​.
  4. 4
    Calculate: A=1.5×103 s−1=1.5×103 BqA=1.5\times10^{3}\,\mathrm{s^{-1}}=1.5\times10^{3}\,\mathrm{Bq}A=1.5×103s−1=1.5×103Bq.

Answer: The activity is 1.5×103 Bq1.5\times10^{3}\,\mathrm{Bq}1.5×103Bq.

Common mistake

A counter may detect only some of the radiation. Activity counts every decay in the source, whether detected or not.

Key term

activity

Activity is the rate of radioactive decay, measured in decays per second or becquerels.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what is meant by the activity of a radioactive source and give its unit.

    Show mark schemeHide mark scheme

    Model answer

    Activity is the rate of radioactive decay, that is the number of decays each second. Its unit is the becquerel.

    • 1 mark for stating that activity is the rate of radioactive decay or the number of decays per second
    • 1 mark for giving the unit as the becquerel (Bq)
  2. 2.Give[2 marks]

    Give the nucleon number and the proton number of the nucleus formed when 86222Rn{}^{222}_{86}\mathrm{Rn}86222​Rn emits an alpha particle.

    Show mark schemeHide mark scheme

    Model answer

    The nucleon number is 222−4=218222-4=218222−4=218 and the proton number is 86−2=8486-2=8486−2=84.

    • 1 mark for giving the nucleon number as 218
    • 1 mark for giving the proton number as 84
  3. 3.Describe[3 marks]

    Describe how the force between two neighbouring protons in a nucleus changes as their separation falls from 5 fm to less than 0.5 fm.

    Show mark schemeHide mark scheme

    Model answer

    At 5 fm the strong nuclear force is almost zero, so only the electrostatic repulsion acts. Between about 3 fm and 0.5 fm the strong nuclear force is attractive. Below about 0.5 fm it becomes repulsive.

    • 1 mark for stating that beyond about 3 fm the strong nuclear force is almost zero and only electrostatic repulsion remains
    • 1 mark for stating that the strong nuclear force is attractive from about 3 fm down to about 0.5 fm
    • 1 mark for stating that the strong nuclear force is repulsive below about 0.5 fm
  4. 4.Describe[3 marks]

    Describe what happens to a nucleus in beta-minus decay and which particles are emitted.

    Show mark schemeHide mark scheme

    Model answer

    A neutron in the nucleus changes into a proton. A fast electron, the beta-minus particle, is emitted. An antineutrino is emitted too.

    • 1 mark for stating that a neutron changes into a proton
    • 1 mark for stating that a beta-minus particle (fast electron) is emitted
    • 1 mark for stating that an antineutrino is emitted
  5. 5.Calculate[2 marks]

    Calculate the activity of a sample that undergoes 3.6×1053.6\times10^{5}3.6×105 decays in 2.0 minutes. Give the unit.

    Show mark schemeHide mark scheme

    Model answer

    The time is 2.0×60=120 s2.0\times60=120\,\mathrm{s}2.0×60=120s. Activity =3.6×105120 s=3.0×103 Bq=\frac{3.6\times10^{5}}{120\,\mathrm{s}}=3.0\times10^{3}\,\mathrm{Bq}=120s3.6×105​=3.0×103Bq.

    • 1 mark for converting 2.0 minutes to 120 s and dividing the number of decays by the time
    • 1 mark for giving the answer as 3.0×103 Bq3.0\times10^{3}\,\mathrm{Bq}3.0×103Bq
  6. 6.Explain[3 marks]

    Explain why a very large nucleus tends to be unstable.

    Show mark schemeHide mark scheme

    Model answer

    A large nucleus has many protons, and the electrostatic repulsion acts between all of them. The strong nuclear force has a short range and attracts only close neighbours. The repulsion therefore becomes too large compared with the attraction.

    • 1 mark for stating that the electrostatic repulsion acts between all the protons
    • 1 mark for stating that the strong nuclear force acts only over a short range or between close neighbours
    • 1 mark for concluding that the repulsion becomes large compared with the attraction

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State the unit of activity and what one unit represents.
Show answer and explanation

Answer: D · Worked explanation

Activity is the rate of decay, so one becquerel is one decay each second. One decay per minute gives the right unit but the wrong rate. One detected count per second confuses activity with what a counter records, which can be less than the true number of decays. The joule measures energy.
4.

Medium·Calculate[2 marks]

Calculate the activity of a source that undergoes 7.2×1057.2\times10^{5}7.2×105 decays in 4.0 minutes.
Show answer and explanation

Answer: B · Worked explanation

Convert the time first: 4.0 min=240 s4.0\,\mathrm{min}=240\,\mathrm{s}4.0min=240s. Then A=7.2×105240 s=3.0×103 BqA=\frac{7.2\times10^{5}}{240\,\mathrm{s}}=3.0\times10^{3}\,\mathrm{Bq}A=240s7.2×105​=3.0×103Bq. The value 1.8×1051.8\times10^{5}1.8×105 comes from dividing by 4.0 without converting minutes to seconds. The value 1.7×1081.7\times10^{8}1.7×108 comes from multiplying by the time instead of dividing. The becquerel is defined per second, so the time must always be in seconds.
5.

Medium·State[2 marks]

State the nucleus formed when 92238U{}^{238}_{92}\mathrm{U}92238​U emits an alpha particle.
Show answer and explanation

Answer: C · Worked explanation

An alpha particle removes 4 nucleons, including 2 protons. The nucleon number becomes 238−4=234238-4=234238−4=234 and the proton number becomes 92−2=9092-2=9092−2=90. Keeping the proton number at 92 forgets that two protons leave. Giving 242 and 94 comes from adding the alpha particle instead of removing it.
6.

Medium·State[2 marks]

State the nucleus formed when 614C{}^{14}_{6}\mathrm{C}614​C undergoes beta-minus decay.
Show answer and explanation

Answer: A · Worked explanation

In beta-minus decay a neutron becomes a proton, so the proton number rises by 1 to 7. The nucleon number stays at 14. A proton number of 5 comes from subtracting 1, as if a proton had changed into a neutron. Applying alpha decay would give nucleon number 10 and proton number 4.
7.

Medium·State[2 marks]

Two protons in a nucleus are 4 fm apart. State which statement about the forces between them is correct.
Show answer and explanation

Answer: D · Worked explanation

The strong nuclear force has a range of about 3 fm, so at 4 fm it is almost zero. The protons are charged, so the electrostatic repulsion remains. Saying the strong force still attracts treats its range as unlimited, but it is attractive only up to about 3 fm.
8.

Hard·Explain[2 marks]

Explain why the energies of beta-minus particles from one source vary continuously.
Show answer and explanation

Answer: B · Worked explanation

If only an electron and a proton shared the energy released, every electron would leave with the same energy. The observed spread shows that a third particle, the antineutrino, takes a varying share each time. Collisions inside the nucleus are not the cause: the variation comes from how the decay itself shares its energy.
9.

Hard·Calculate[2 marks]

A source has an activity of 2.4×103 Bq2.4\times10^{3}\,\mathrm{Bq}2.4×103Bq. Assume the activity stays constant. Calculate the number of decays in 5.0 minutes.
Show answer and explanation

Answer: C · Worked explanation

Rearranging A=ΔNΔtA=\frac{\Delta N}{\Delta t}A=ΔtΔN​ gives ΔN=A Δt\Delta N=A\,\Delta tΔN=AΔt. With Δt=300 s\Delta t=300\,\mathrm{s}Δt=300s, ΔN=2.4×103×300=7.2×105\Delta N=2.4\times10^{3}\times300=7.2\times10^{5}ΔN=2.4×103×300=7.2×105. The value 1.2×1041.2\times10^{4}1.2×104 comes from multiplying by 5.0 without converting minutes to seconds. The value 4.8×1024.8\times10^{2}4.8×102 comes from dividing by 5.0. Always convert minutes to seconds first, because activity is defined per second.
10.

Hard[2 marks]

A radioactive source has an activity of 500 Bq. Which statement is correct?
Show answer and explanation

Answer: A · Worked explanation

An activity of 500 Bq means 500 decays each second on average. Decay is random, so the number in any one second varies and nobody can predict which nuclei decay. A detector usually records fewer counts than there are decays, because not all the radiation reaches it.

Keep going

Next topic3.2.1.3 Particles, antiparticles and photonsPrevious topic3.2.1.1 Constituents of the atom

More in Section 3.2 · Particles and radiation

  1. 3.2.1.1Constituents of the atomNotes · 10 questions
  2. 3.2.1.2Stable and unstable nucleiNotes · 10 questions
  3. 3.2.1.3Particles, antiparticles and photonsNotes · 10 questions
  4. 3.2.1.4Particle interactionsNotes · 10 questions
  5. 3.2.1.5Classification of particlesNotes · 10 questions
  6. 3.2.1.6Quarks and antiquarksNotes · 10 questions
  7. 3.2.1.7Conservation lawsNotes · 10 questions
  8. 3.2.2.1The photoelectric effectNotes · 10 questions
  9. 3.2.2.2Electron collisions with atomsNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1Stable nuclei stay unchanged and unstable nuclei emit radiation
  2. 2Two forces act on the protons inside a nucleus
  3. 3The strong nuclear force changes with the separation of particles
  4. 4Unstable nuclei decay by emitting radiation at random
  5. 5Beta-minus decay turns a neutron into a proton
  6. 6Activity measures how many nuclei decay each second
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe