Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Biology
  3. ›4.7 Ecology
  4. ›4.7.4 Trophic levels

AQA GCSE Biology · Section 4.7 · Ecology

4.7.4 Trophic levels

Describe trophic levels, interpret and draw biomass pyramids, and explain and calculate biomass transfer.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Trophic levels show feeding positions in a food chain
  1. 1Trophic levels show feeding positions in a food chain
  2. 2Pyramid widths represent biomass at each trophic level
  3. 3Transfer efficiency compares biomass gained with biomass available
  4. 4Biomass decreases because not all material reaches consumers
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Trophic levels show feeding positions in a food chain

A trophic level is a feeding position in a food chain. A producer makes its own food, usually by photosynthesis. Producers form the first trophic level. A primary consumer eats producers and forms the second level. A secondary consumer eats primary consumers and forms the third level.

For example, grass → rabbit → fox has three trophic levels. Grass is the producer, rabbit is the primary consumer, and fox is the secondary consumer. Arrows point from food to feeder. They show the direction in which biomass passes along the chain.

Common mistake

A food-chain arrow points from an organism being eaten to its consumer. It shows the direction of biomass transfer.

Key terms · tap one for its definition

trophic level

A trophic level is an organism’s feeding position in a food chain.

producer

Producers make their own food, usually using light energy during photosynthesis.

primary consumer

A primary consumer eats producers and occupies the second trophic level.

Part 1 done

2

Part 2 of 4: Pyramid widths represent biomass at each trophic level

Biomass is the mass of living material. A pyramid of biomass shows how much living material is present at each trophic level. Its bars are stacked, with producers at the bottom. Each bar’s width is proportional to that level’s biomass. Labels identify the organisms or trophic levels.

Biomass is often measured as dry mass per unit area, such as g m−2\text{g m}^{-2}g m−2. Dry mass excludes water, whose amount varies between organisms. To interpret a pyramid, compare bar widths or read the given values. To draw one, choose a consistent width scale. Draw centred bars using the same scale at every level.

Figure 1. Compare the widths of the centred bars. The producer bar is widest.

Exam tip

Keep every bar the same height. Make its width, not its height, represent biomass.

Key terms · tap one for its definition

biomass

Biomass is the mass of living material in an organism or group of organisms.

pyramid of biomass

A pyramid of biomass uses stacked bars to show the biomass at successive trophic levels.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify what a trophic level represents in a food chain.
Show answer and explanation

Answer: A · Worked explanation

A trophic level is an organism’s position in a food chain, such as producer or primary consumer. The total mass of organisms describes biomass, not their position in the chain.
3

Part 3 of 4: Transfer efficiency compares biomass gained with biomass available

Transfer efficiency is the percentage of biomass passed from one trophic level to the next. Divide the biomass at the higher level by the biomass at the level below. Then multiply by 100. The two biomass values must use the same units and cover comparable areas.

The calculation is efficiency=biomass at higher levelbiomass at lower level×100%\text{efficiency}=\frac{\text{biomass at higher level}}{\text{biomass at lower level}}\times100\text{\%}efficiency=biomass at lower levelbiomass at higher level​×100%. A percentage below 100% means less biomass is available at the higher level. This calculation compares two adjacent levels, not the first and last levels of a longer chain.

Worked example

Calculate transfer efficiency

Producer biomass is 800 g m−2800\,\text{g m}^{-2}800g m−2. Primary consumer biomass is 80 g m−280\,\text{g m}^{-2}80g m−2. Calculate the transfer efficiency.
  1. 1
    Use efficiency=primary consumer biomassproducer biomass×100%\text{efficiency}=\frac{\text{primary consumer biomass}}{\text{producer biomass}}\times100\text{\%}efficiency=producer biomassprimary consumer biomass​×100%.
  2. 2
    Substitute: 80800×100%=10%\frac{80}{800}\times100\text{\%}=10\text{\%}80080​×100%=10%.

Answer: The biomass transfer efficiency is 10%.

Key term

transfer efficiency

Transfer efficiency is the percentage of biomass passed from one trophic level to the next.

Part 3 done

4

Part 4 of 4: Biomass decreases because not all material reaches consumers

Less biomass is usually present at each successive trophic level. Not all parts of an organism are eaten. Some eaten material cannot be digested and leaves as faeces. Organisms also lose material in waste products. Therefore, not all biomass at one level becomes biomass at the next.

Organisms use absorbed substances in respiration. This releases energy for movement, growth and other life processes. Respiration also produces carbon dioxide and water, which leave the organism. These losses mean less material remains to build new biomass. A biomass pyramid therefore usually becomes narrower towards the top.

Common mistake

Biomass is not lost as heat. Respiration releases heat, while material leaves as carbon dioxide and water.

Key term

respiration

Respiration is a process in cells that releases energy from glucose.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[2 marks]

    Define a trophic level and identify the first trophic level.

    Show mark schemeHide mark scheme

    Model answer

    A trophic level is a feeding position in a food chain. Producers occupy the first trophic level.

    • 1 mark for defining a trophic level as a feeding position in a food chain
    • 1 mark for identifying producers as the first trophic level
  2. 2.Describe[3 marks]

    Describe how to draw a pyramid of biomass from values for three trophic levels.

    Show mark schemeHide mark scheme

    Model answer

    Put producers at the bottom and stack the other levels in feeding order. Use one scale so each bar’s width is proportional to its biomass. Centre and label the bars.

    • 1 mark for placing producers at the bottom and other levels in feeding order
    • 1 mark for using one scale to make widths proportional to biomass
    • 1 mark for centring and labelling the bars
  3. 3.Calculate[3 marks]

    Calculate the transfer efficiency when producer biomass is 500 g m−2500\,\text{g m}^{-2}500g m−2 and primary consumer biomass is 50 g m−250\,\text{g m}^{-2}50g m−2.

    Show mark schemeHide mark scheme

    Model answer

    Divide primary consumer biomass by producer biomass, then multiply by 100: 50500×100%=10%\frac{50}{500}\times100\text{\%}=10\text{\%}50050​×100%=10%.

    • 1 mark for dividing the primary consumer biomass by the producer biomass
    • 1 mark for multiplying the resulting fraction by 100
    • 1 mark for giving the answer as 10%
  4. 4.Explain[4 marks]

    Explain why biomass usually decreases between successive trophic levels.

    Show mark schemeHide mark scheme

    Model answer

    Not all parts of organisms are eaten. Some eaten material is not digested and leaves as faeces. Organisms lose other material as waste. Respiration produces carbon dioxide and water, so less material remains to build biomass.

    • 1 mark for stating that not all parts of organisms are eaten
    • 1 mark for stating that undigested material leaves as faeces
    • 1 mark for stating that material is lost in waste products
    • 1 mark for linking respiration and the release of carbon dioxide and water to reduced biomass
  5. 5.Compare[2 marks]

    Compare biomass in the producer and secondary consumer bars of a typical biomass pyramid.

    Show mark schemeHide mark scheme

    Model answer

    The producer bar is wider and represents more biomass. The secondary consumer bar is narrower and represents less biomass.

    • 1 mark for identifying the producer bar as wider and showing more biomass
    • 1 mark for identifying the secondary consumer bar as narrower and showing less biomass

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State what the width of a bar represents in a pyramid of biomass.
Show answer and explanation

Answer: D · Worked explanation

In a pyramid of biomass, each bar represents the total biomass of organisms at one trophic level, usually for a given area at a particular time. The number of species is not what determines the bar’s width.
3.

Easy·Identify[1 mark]

Identify the calculation used to find the percentage efficiency of biomass transfer from one trophic level to the next.
Show answer and explanation

Answer: A · Worked explanation

Percentage efficiency is the biomass transferred to the next trophic level divided by the biomass available at the previous level, multiplied by 100. Dividing in the opposite order would not give the percentage transferred.
4.

Easy·Identify[1 mark]

Identify one reason why biomass is not passed on from an organism to the next trophic level.
Show answer and explanation

Answer: D · Worked explanation

Some of the biomass an organism takes in is used in respiration, and the products are released rather than becoming biomass in the next trophic level. Biomass is not destroyed by eating; some is transferred, while some is lost in other ways.
5.

Medium·Interpret[1 mark]

A food chain has a producer biomass of 800 g m−2800\,\text{g m}^{-2}800g m−2, a primary consumer biomass of 160 g m−2160\,\text{g m}^{-2}160g m−2 and a secondary consumer biomass of 32 g m−232\,\text{g m}^{-2}32g m−2. Which description best matches a pyramid of biomass for this chain?
Show answer and explanation

Answer: A · Worked explanation

The biomass decreases at each successive trophic level, from 800 to 160 to 32 g m−232\,\text{g m}^{-2}32g m−2. The bars should therefore be drawn with the producer bar widest and each bar above it narrower; equal-width bars would not represent the data.
6.

Medium·Calculate[2 marks]

A population of plants has a biomass of 600 kg600\,\text{kg}600kg. The herbivores feeding on them gain 90 kg90\,\text{kg}90kg of biomass. Calculate the percentage efficiency of biomass transfer from plants to herbivores.
Show answer and explanation

Answer: D · Worked explanation

Efficiency is biomass transferred divided by biomass available, multiplied by 100: 90÷600×100=15%90 \div 600 \times 100 = 15\%90÷600×100=15%. The tempting value 6.7%6.7\%6.7% comes from reversing the division, so it does not represent the fraction of plant biomass transferred.
7.

Medium·Explain[2 marks]

A rabbit eats plant material but gains much less biomass than the mass of plants it consumes. Explain one reason for this difference.
Show answer and explanation

Answer: B · Worked explanation

Some ingested material is not digested or absorbed, so it leaves the rabbit as faeces rather than adding to its biomass. The idea that all digested material is stored is incorrect because some absorbed material is also used in respiration and other life processes.
8.

Medium·Deduce[2 marks]

In a lake, a sample shows less phytoplankton biomass than zooplankton biomass at the time it is measured. Which conclusion about a pyramid of biomass is supported by this observation?
Show answer and explanation

Answer: C · Worked explanation

A pyramid of biomass represents biomass at the time of sampling, so the producer bar could be narrower than the primary-consumer bar in this lake sample. This does not remove the producer level: phytoplankton are producers even if their measured biomass is lower.
9.

Hard·Determine[2 marks]

In a food chain, producers have a biomass of 2,000 kg2{,}000\,\text{kg}2,000kg, primary consumers have 200 kg200\,\text{kg}200kg and secondary consumers have 20 kg20\,\text{kg}20kg. Determine the overall percentage efficiency of biomass transfer from producers to secondary consumers.
Show answer and explanation

Answer: A · Worked explanation

Overall efficiency compares the biomass at the final level with the biomass at the starting level: 20÷2,000×100=1%20 \div 2{,}000 \times 100 = 1\%20÷2,000×100=1%. The value 10%10\%10% is the efficiency for either one step in this chain, not the transfer across both steps.
10.

Hard·Explain[2 marks]

A plant has 500 g500\,\text{g}500g of biomass. An insect eats part of it, but only 20 g20\,\text{g}20g of new insect biomass is recorded. Which explanation best accounts for the small transfer?
Show answer and explanation

Answer: B · Worked explanation

Not all plant material is eaten or digested, and some absorbed material is used in respiration rather than incorporated into new insect tissue. The claim that matter is destroyed during feeding is incorrect; biomass is transferred or released in other forms, not destroyed.

Keep going

Next topic4.7.5 Food productionPrevious topic4.7.3 Biodiversity and human impact

More in Section 4.7 · Ecology

  1. 4.7.1Adaptations, interdependence and competitionNotes · 10 questions
  2. 4.7.2Organisation of an ecosystemNotes · 10 questions
  3. 4.7.3Biodiversity and human impactNotes · 10 questions
  4. 4.7.4Trophic levelsNotes · 10 questions
  5. 4.7.5Food productionNotes · 10 questions

All AQA GCSE Biology topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1Trophic levels show feeding positions in a food chain
  2. 2Pyramid widths represent biomass at each trophic level
  3. 3Transfer efficiency compares biomass gained with biomass available
  4. 4Biomass decreases because not all material reaches consumers
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe