AQA GCSE Combined Science: Trilogy · Section 5.8 · Chemistry: Chemical analysis
5.8.2 Tests for common gases
Describe how to test for hydrogen, oxygen, carbon dioxide and chlorine gases.
1/4Hydrogen makes a squeaky pop with a lit splint
Part 1 of 4: Hydrogen makes a squeaky pop with a lit splint
Hold a lit splint at the mouth of a container holding the gas. Hydrogen burns with a characteristic squeaky pop. The sound comes from hydrogen reacting rapidly with oxygen in the air. Bring the splint to the container opening rather than putting your face near it. Only a small sample is needed.
A pop is the positive result for this test. Seeing a flame is not enough to identify hydrogen. State both what you do and what you observe when describing a gas test.
Key terms · tap one for its definition
lit splint
A lit splint is a wooden stick with a burning flame at its tip.
Hydrogen
Hydrogen is a gas that burns with a squeaky pop when tested with a lit splint.
Part 2 of 4: Oxygen relights a glowing splint
Light a wooden splint, then blow out the flame. Its tip should still glow. Place the glowing splint into a container holding the gas. If the splint relights, oxygen is present. Oxygen supports burning, so the glowing wood can catch fire again.
The hydrogen test uses a lit splint and produces a pop. The oxygen test uses a glowing splint and relights it. Keeping these observations separate makes each result clear.
Key terms · tap one for its definition
glowing splint
A glowing splint is a wooden stick whose flame has gone out while its tip remains hot and glowing.
oxygen
Oxygen is a gas that supports burning and relights a glowing splint.
Part 3 of 4: Carbon dioxide turns limewater milky
Bubble the gas through limewater, which is a clear solution of calcium hydroxide. If the limewater turns milky, the gas contains carbon dioxide. The milkiness comes from a white solid, calcium carbonate, forming in the liquid.
Use a delivery tube to pass the gas into the limewater. Look for a change from clear to cloudy as the bubbles pass through. The test depends on the gas reaching the liquid. Holding the tube above it will not give the intended result.
Key terms · tap one for its definition
limewater
Limewater is a clear calcium hydroxide solution that turns milky when carbon dioxide passes through it.
carbon dioxide
Carbon dioxide is a gas that turns limewater milky by forming a calcium carbonate precipitate.
calcium carbonate
Calcium carbonate is the white solid that makes limewater appear milky in the carbon dioxide test.
Part 4 of 4: Chlorine bleaches damp blue litmus paper
Expose damp blue litmus paper to the gas. Chlorine first turns the paper red, then bleaches it white. The paper must be damp because the colour changes require moisture. The final white colour is especially useful when identifying chlorine.
Chlorine is toxic, so do not smell it or breathe it in. Handle a sample only with appropriate ventilation and supervision. Observe the paper rather than trying to identify the gas by its smell.
Key terms · tap one for its definition
damp blue litmus paper
Damp blue litmus paper turns red and then white when exposed to chlorine gas.
Chlorine
Chlorine is a toxic gas that turns damp blue litmus paper red before bleaching it white.
Check your recall[12 marks]
5 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Describe[2 marks]
Describe how to test a gas sample for hydrogen.
Show mark schemeHide mark scheme
Model answer
Hold a lit splint at the container opening. Hydrogen gives a squeaky pop.
- 1 mark for holding a lit splint at the opening of the container
- 1 mark for observing a squeaky pop
- 2.Explain[3 marks]
Explain how to test for oxygen and why the result occurs.
Show mark schemeHide mark scheme
Model answer
Put a glowing splint into the gas. It relights because oxygen supports burning.
- 1 mark for using a glowing splint
- 1 mark for stating that the splint relights
- 1 mark for explaining that oxygen supports burning
- 3.Describe[3 marks]
Describe how to test for carbon dioxide, including the observation.
Show mark schemeHide mark scheme
Model answer
Bubble the gas through clear limewater. It turns milky because a white calcium carbonate solid forms.
- 1 mark for bubbling the gas through limewater
- 1 mark for observing that the limewater turns milky
- 1 mark for linking the milkiness to the formation of calcium carbonate
- 4.Describe[3 marks]
Describe the test for chlorine gas and its positive result.
Show mark schemeHide mark scheme
Model answer
Expose damp blue litmus paper to the gas. It turns red, then is bleached white.
- 1 mark for using damp blue litmus paper
- 1 mark for observing that the paper first turns red
- 1 mark for observing that the paper is then bleached white
- 5.State[1 mark]
State one safety precaution when testing for chlorine gas.
Show mark schemeHide mark scheme
Model answer
Do not breathe in the gas.
- 1 mark for avoiding inhalation of chlorine gas, or using appropriate ventilation

Practice this topic
7 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 7 answered
EasyIdentify[1 mark]
Show answer and explanation
Answer: C · Worked explanation
EasyState[1 mark]
Show answer and explanation
Answer: B · Worked explanation
EasyIdentify[1 mark]
Show answer and explanation
Answer: A · Worked explanation
EasyState[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumDetermine[2 marks]
Show answer and explanation
Answer: A · Worked explanation
HardEvaluate[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardExplain[2 marks]
Show answer and explanation
Answer: D · Worked explanation