Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›6.7 Physics: Magnetism and electromagnetism
  4. ›6.7.2 The motor effect

AQA GCSE Combined Science: Trilogy · Section 6.7 · Physics: Magnetism and electromagnetism

6.7.2 The motor effect

Explain and predict the motor effect, calculate its force, and describe a simple electric motor.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A magnetic field pushes a current-carrying wire
  1. 1A magnetic field pushes a current-carrying wire
  2. 2Fleming’s left-hand rule predicts the force direction
  3. 3Field strength, current and wire length set the force
  4. 4Opposite forces turn a simple electric motor
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A magnetic field pushes a current-carrying wire

A current-carrying wire experiences a force when placed in a magnetic field. This is the motor effect. The force is greatest when the wire is perpendicular to the field. There is no force when the wire is parallel to the field. A stronger magnetic field or a larger current increases the force.

The magnetic field direction runs from north to south between magnet poles. The direction of the force depends on both the field direction and the current direction. Reversing either one reverses the force. Reversing both leaves the force in its original direction. In each case, the force acts at right angles to the current and the field.

Key terms · tap one for its definition

motor effect

The motor effect is the force on a current-carrying conductor in a magnetic field.

magnetic field direction

The magnetic field direction between magnet poles runs from north to south.

Part 1 done

2

Part 2 of 4: Fleming’s left-hand rule predicts the force direction

Fleming’s left-hand rule links three directions. Hold your left thumb, first finger and second finger at right angles to each other. Point your first finger along the magnetic field, from north to south. Point your second finger along the conventional current, from positive to negative. Your thumb then points in the direction of the force on the wire.

Figure 1. Set the field and current directions first. The thumb then shows the force.

Common mistake

Do not use electron flow for the second finger. Conventional current runs in the opposite direction.

Keep the same left hand when a direction changes. Turn your hand until both fingers point correctly, then read the thumb.

Key terms · tap one for its definition

Fleming’s left-hand rule

Fleming’s left-hand rule uses the thumb, first finger and second finger to show force, field and current respectively.

conventional current

Conventional current is treated as flowing from the positive terminal to the negative terminal.

Part 2 done

Quick check

One question on the part you just read

Easy

State what happens when a current-carrying wire is placed at right angles to a magnetic field.
Show answer and explanation

Answer: A · Worked explanation

A current in the wire produces its own magnetic field, which interacts with the external field; this interaction produces a force on the wire. The wire does not need to be made from iron, and the fields are not necessarily cancelled completely.
3

Part 3 of 4: Field strength, current and wire length set the force

For a straight wire perpendicular to a uniform magnetic field, the force is F=BILF=BILF=BIL. Here, FFF is force in newtons and BBB is magnetic flux density in tesla. III is current in amperes, and LLL is the length in the field in metres. Use only the wire length inside the field. This equation does not give the full force when the wire is at another angle.

Worked example

Calculate the force on a wire

A 0.20 m wire carries 3.0 A perpendicular to a field of 0.50 T. Calculate the force.
  1. 1
    Write F=BILF=BILF=BIL.
  2. 2
    Substitute the values: F=0.50×3.0×0.20F=0.50\times3.0\times0.20F=0.50×3.0×0.20.
  3. 3
    Calculate F=0.30 NF=0.30\,\mathrm{N}F=0.30N.

Answer: The force is 0.30 N.

Exam tip

Check that the wire length is in metres before substituting.

Key terms · tap one for its definition

magnetic flux density

Magnetic flux density measures magnetic field strength and has the unit tesla.

length in the field

Length in the field is the part of the wire inside the magnetic field, measured in metres.

Part 3 done

4

Part 4 of 4: Opposite forces turn a simple electric motor

A simple electric motor has a rectangular coil between magnetic poles. Current flows in opposite directions along the two sides of the coil. Each side experiences a force in the opposite direction. These forces turn the coil.

A split-ring commutator reverses the current in the coil every half-turn. As the coil turns, each side moves towards the opposite pole. The forces therefore keep turning the coil in the same direction. Brushes maintain electrical contact with the rotating split ring. The motor converts electrical energy into kinetic energy.

Common mistake

The current reverses in the coil, but the motor does not reverse its rotation every half-turn.

Key terms · tap one for its definition

coil

A coil is a loop of wire that can turn when opposite sides experience opposing forces.

split-ring commutator

A split-ring commutator reverses the current in a motor coil every half-turn.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe what happens to a current-carrying wire placed perpendicular to a magnetic field.

    Show mark schemeHide mark scheme

    Model answer

    The wire experiences a force at right angles to both the current and the magnetic field.

    • 1 mark for stating that the wire experiences a force
    • 1 mark for stating that the force is perpendicular to both the current and the field
  2. 2.Explain[2 marks]

    Explain how reversing the current affects the force on a wire in an unchanged magnetic field.

    Show mark schemeHide mark scheme

    Model answer

    Reversing the current reverses the direction of the force because force direction depends on current direction.

    • 1 mark for stating that the force reverses direction
    • 1 mark for linking force direction to current direction
  3. 3.Use[3 marks]

    Use Fleming’s left-hand rule to identify the finger for the force, field and conventional current.

    Show mark schemeHide mark scheme

    Model answer

    The thumb shows force, the first finger shows the magnetic field, and the second finger shows conventional current.

    • 1 mark for identifying the thumb as force
    • 1 mark for identifying the first finger as magnetic field
    • 1 mark for identifying the second finger as conventional current
  4. 4.Calculate[3 marks]

    Calculate the force on a 0.40 m wire carrying 2.0 A perpendicular to a 0.30 T magnetic field.

    Show mark schemeHide mark scheme

    Model answer

    Using F=BILF=BILF=BIL, F=0.30×2.0×0.40=0.24 NF=0.30\times2.0\times0.40=0.24\,\mathrm{N}F=0.30×2.0×0.40=0.24N.

    • 1 mark for using F=BILF=BILF=BIL
    • 1 mark for substituting 0.30×2.0×0.400.30\times2.0\times0.400.30×2.0×0.40
    • 1 mark for giving 0.24 N
  5. 5.Explain[4 marks]

    Explain how a split-ring commutator helps a simple electric motor keep turning.

    Show mark schemeHide mark scheme

    Model answer

    Opposite sides of the current-carrying coil experience opposing forces, which turn it. The split-ring commutator reverses the current every half-turn. Each side also moves to the opposite pole, so the forces keep the coil turning in the same direction.

    • 1 mark for stating that opposite sides of the coil experience opposing forces
    • 1 mark for stating that these forces turn the coil
    • 1 mark for stating that the split-ring commutator reverses the current every half-turn
    • 1 mark for explaining that the forces continue turning the coil in the same direction

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify what happens to the force on a current-carrying wire if the direction of the current is reversed while the magnetic field direction stays the same.
Show answer and explanation

Answer: A · Worked explanation

The direction of the force depends on both the current direction and the magnetic field direction. Reversing just the current reverses the force. The force does not disappear, and the magnetic field does not have to change direction.
3.

Easy·State[1 mark]

State which part of Fleming's left-hand rule represents the conventional current.
Show answer and explanation

Answer: D · Worked explanation

In Fleming's left-hand rule, the first finger represents the magnetic field, the second finger represents conventional current, and the thumb represents force or motion. The thumb therefore does not indicate current.
4.

Easy·Identify[1 mark]

Identify the component in a simple d.c. motor that reverses the current in the coil every half-turn.
Show answer and explanation

Answer: C · Worked explanation

The split-ring commutator reverses the current in the coil every half-turn, so the force on each side of the coil continues to produce rotation in the same overall sense. The permanent magnets provide the field but do not switch the current.
5.

Medium·Calculate[2 marks]

A straight wire of length 0.20 m0.20\,\text{m}0.20m carries a current of 3.0 A3.0\,\text{A}3.0A at right angles to a magnetic field of strength 0.40 T0.40\,\text{T}0.40T. Calculate the force on the wire.
Show answer and explanation

Answer: B · Worked explanation

Use F=BILF = BILF=BIL: F=0.40 T×3.0 A×0.20 m=0.24 NF = 0.40\,\text{T} \times 3.0\,\text{A} \times 0.20\,\text{m} = 0.24\,\text{N}F=0.40T×3.0A×0.20m=0.24N. The tempting value 0.024 N0.024\,\text{N}0.024N comes from placing the decimal point one place too far to the left.
6.

Medium·Determine[2 marks]

A wire at right angles to a magnetic field experiences a force of 0.60 N0.60\,\text{N}0.60N. The field strength is 0.50 T0.50\,\text{T}0.50T and the current is 4.0 A4.0\,\text{A}4.0A. Determine the length of wire in the field.
Show answer and explanation

Answer: B · Worked explanation

Rearrange F=BILF = BILF=BIL to give L=F/(BI)L = F/(BI)L=F/(BI). Substituting gives L=0.60/(0.50×4.0)=0.30 mL = 0.60/(0.50 \times 4.0) = 0.30\,\text{m}L=0.60/(0.50×4.0)=0.30m. The value 1.2 m1.2\,\text{m}1.2m results from multiplying the force by the current and field rather than dividing by their product.
7.

Medium·Deduce[1 mark]

A wire carries conventional current towards the north, while the magnetic field points vertically upwards. Deduce the direction of the force on the wire.
Show answer and explanation

Answer: C · Worked explanation

The current direction and field direction are at right angles, so Fleming's left-hand rule gives a force towards the east. The force is perpendicular to both the current and the field, so it cannot point north or upwards.
8.

Medium·Explain[2 marks]

Explain why a simple d.c. motor can keep rotating in the same overall direction after its coil has turned through half a revolution.
Show answer and explanation

Answer: C · Worked explanation

After each half-turn, the split-ring commutator reverses the current in the coil. This also reverses the forces on its sides, keeping the turning effect in the same overall direction. The magnets do not reverse their field, and inertia alone would not provide the motor's continuing turning effect.
9.

Medium·Compare[2 marks]

A wire carries a current towards the east in a magnetic field directed towards the north. Compare the force direction when the current is reversed, with the field unchanged.
Show answer and explanation

Answer: B · Worked explanation

With current east and field north, the force is vertical; reversing the current reverses that force, so upwards becomes downwards or vice versa. The force does not remain unchanged, and reversing the current does not make the current parallel to the field.
10.

Hard·Determine[2 marks]

A straight wire carries conventional current into the page, and the magnetic field points from left to right across the page. Determine the direction of the force on the wire.
Show answer and explanation

Answer: C · Worked explanation

Using Fleming's left-hand rule, point the first finger to the right for the field and the second finger into the page for the current; the thumb points towards the bottom of the page. The force is perpendicular to both current and field, so it is not along either of those directions.

Keep going

Previous topic6.7.1 Magnets and magnetic fields

More in Section 6.7 · Physics: Magnetism and electromagnetism

  1. 6.7.1Magnets and magnetic fieldsNotes · 10 questions
  2. 6.7.2The motor effectNotes · 10 questions

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1A magnetic field pushes a current-carrying wire
  2. 2Fleming’s left-hand rule predicts the force direction
  3. 3Field strength, current and wire length set the force
  4. 4Opposite forces turn a simple electric motor
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe