Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›Edexcel A-level Biology A (Salters-Nuffield)
  3. ›2 Genes and Health
  4. ›2.8 Genes and polypeptides

Edexcel A-level Biology A (Salters-Nuffield) · Topic 2 · Genes and Health

2.8 Genes and polypeptides

Explain how a gene specifies one polypeptide, and describe how gene mutations alter polypeptides and protein function.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6One gene usually codes for one polypeptide
  1. 1One gene usually codes for one polypeptide
  2. 2The order of bases sets the order of amino acids
  3. 3A gene mutation is a change in a gene’s bases
  4. 4A substitution changes one amino acid or none
  5. 5Insertions and deletions can shift every later codon
  6. 6Mutations can alter protein shape and function
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: One gene usually codes for one polypeptide

Think of DNA as a library of instruction booklets. Each booklet tells the cell how to build one product. A gene works in the same way, because proteins do much of a cell’s work.

The product is usually a polypeptide, a chain of amino acids. Amino acids are the small molecules that make up proteins. A gene therefore specifies the order of amino acids in one polypeptide.

Some proteins contain several polypeptides. Haemoglobin has four, made using the genes for two different types of chain. So the rule is one gene for one polypeptide, not one gene for one whole protein.

Key terms · tap one for its definition

gene

A gene is a sequence of DNA that influences a characteristic.

polypeptide

A polypeptide is a chain of amino acids joined by peptide bonds.

Part 1 done

2

Part 2 of 6: The order of bases sets the order of amino acids

Now follow the information from gene to chain. The cell first makes an mRNA copy of the gene. Its bases are read in groups of three, called codons.

Each codon adds a particular amino acid to the growing chain. The genetic code tells the cell which amino acid goes with which codon. A few codons instead signal the end of the chain.

So the base order in the gene fixes the amino acid order in the polypeptide. That order decides how the chain folds into a three-dimensional shape. The shape decides the protein’s job, for example whether it can act as an enzyme.

Key term

genetic code

The genetic code is the set of relationships between mRNA codons and their amino acids or stop signals.

Part 2 done

Quick check

One question on the part you just read

Easy

Which statement describes the relationship between a gene and a polypeptide?
Show answer and explanation

Answer: B · Worked explanation

A gene specifies the order of amino acids in one polypeptide. The idea that a gene specifies a whole protein fails because some proteins, such as haemoglobin, contain several polypeptides made using more than one gene. A single amino acid is only one part of the chain.
3

Part 3 of 6: A gene mutation is a change in a gene’s bases

Because base order sets amino acid order, a change in the bases can matter. Sometimes the order of bases in a gene changes. This change is a gene mutation. It may arise when DNA is copied or after damage.

There are three basic kinds of change.

  • Substitution: one base is replaced by a different base.
  • Insertion: one or more extra bases are added.
  • Deletion: one or more bases are lost.

Common mistake

Mutation does not always mean harm. Many mutations leave the polypeptide unchanged or make no difference to the organism.

Key term

gene mutation

A gene mutation is a change in the DNA base sequence of a gene.

Part 3 done

4

Part 4 of 6: A substitution changes one amino acid or none

A substitution alters just one codon, so its effect is limited. Three outcomes are possible.

  • A silent mutation gives a new codon for the same amino acid, as most amino acids have several codons.
  • A missense mutation gives a codon for a different amino acid, so the polypeptide differs at one position.
  • A nonsense mutation gives a stop codon, which adds no amino acid, so the chain ends early and is shorter.

Effects of single-base substitutions in the mRNA codon GAA, which specifies glutamic acid

ChangeResultType
GAA to GAGstill glutamic acidsilent
GAA to GUAvaline replaces glutamic acidmissense
GAA to UAAchain ends at this pointnonsense
Change
GAA to GAG
Result
still glutamic acid
Type
silent
Change
GAA to GUA
Result
valine replaces glutamic acid
Type
missense
Change
GAA to UAA
Result
chain ends at this point
Type
nonsense

Each of these changes alters just one codon. The effect on the protein depends on the amino acid that results.

Key terms · tap one for its definition

silent mutation

A silent mutation is a base substitution that does not change the amino acid sequence of the polypeptide.

missense mutation

A missense mutation is a base substitution that changes a codon so that it specifies a different amino acid.

nonsense mutation

A nonsense mutation is a base substitution that changes a codon for an amino acid into a stop codon.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the type of gene mutation in which one base is replaced by a different base.
Show answer and explanation

Answer: D · Worked explanation

A substitution replaces one base with another and so keeps the number of bases the same. An insertion adds bases and a deletion removes them. Frameshift describes a possible effect of an insertion or deletion, not a base being replaced.
5

Part 5 of 6: Insertions and deletions can shift every later codon

Insertions and deletions behave differently because they change the number of bases. Codons do not overlap, so the cell reads bases in fixed groups of three. Adding or losing one base moves every codon after that point. This is a frameshift mutation.

Most amino acids after the change are then different. The polypeptide is often a different length, and a new stop codon may appear early.

Figure 1. Amber boxes show codons changed by the mutation. A substitution alters one codon, whereas a deletion alters every codon after it.

If three bases are added or lost, the grouping stays the same after the change. The polypeptide gains or loses one amino acid but keeps the rest unchanged.

Common mistake

Losing three bases is not a frameshift. It removes one amino acid, and the codons after it stay in the same groups.

Key term

frameshift mutation

A frameshift mutation is an insertion or deletion of a number of bases not divisible by three, which changes every later codon.

Part 5 done

6

Part 6 of 6: Mutations can alter protein shape and function

A changed amino acid can change how a polypeptide folds. A different shape may stop the protein working. Sometimes the change is small enough that function is unaffected.

Sickle cell disease shows this. A substitution in the gene for one haemoglobin polypeptide replaces glutamic acid with valine. Haemoglobin is the oxygen-carrying protein in red blood cells. The changed molecules can form fibres in low oxygen, which distorts the cells.

A common cause of cystic fibrosis is a deletion of three bases. One amino acid is missing from a membrane protein that transports chloride ions. The protein folds incorrectly and does not work normally.

Exam tip

Link each stage when you explain an effect: base change, new codon, amino acid change, new shape, altered function.

Go deeperWhy one amino acid can matter so much

A substitution has most effect when the new amino acid has very different properties. Glutamic acid has a charged side chain, whereas valine has a non-polar one. That difference changes how haemoglobin molecules interact with each other.

The position of the change also matters. A change at a site important for folding or binding does more harm. A change elsewhere may do very little.

Note read

Check your recall[16 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the relationship between a gene and a polypeptide.

    Show mark schemeHide mark scheme

    Model answer

    A gene specifies the order of amino acids in a polypeptide. Usually one gene codes for one polypeptide.

    • 1 mark for stating that a gene specifies the order (sequence) of amino acids
    • 1 mark for stating that this is for one polypeptide
  2. 2.Explain[3 marks]

    Explain how a missense mutation can stop a protein working.

    Show mark schemeHide mark scheme

    Model answer

    The changed base alters a codon, so a different amino acid is added. This can change how the chain folds, so the shape of the protein changes. The altered shape may stop it carrying out its function.

    • 1 mark for stating that the codon changes so a different amino acid is added
    • 1 mark for stating that the folding or three-dimensional shape of the polypeptide changes
    • 1 mark for linking the changed shape to loss of function
  3. 3.Compare[3 marks]

    Compare the effects of a silent mutation and a missense mutation.

    Show mark schemeHide mark scheme

    Model answer

    Both are base substitutions. A silent mutation gives a codon for the same amino acid, so the polypeptide is unchanged. A missense mutation gives a different amino acid, so the polypeptide differs at one position.

    • 1 mark for stating that both are substitutions of one base
    • 1 mark for stating that a silent mutation leaves the amino acid sequence unchanged
    • 1 mark for stating that a missense mutation changes one amino acid
  4. 4.Explain[3 marks]

    Explain why deleting one base usually has a greater effect than substituting one base.

    Show mark schemeHide mark scheme

    Model answer

    Codons are read in fixed groups of three. Deleting one base shifts the grouping of every later codon. Many amino acids after that point change, whereas a substitution changes at most one codon.

    • 1 mark for stating that codons are read in fixed groups of three
    • 1 mark for stating that a deletion shifts the grouping of all later codons
    • 1 mark for stating that a substitution alters only one codon
  5. 5.Describe[3 marks]

    Describe how a gene mutation causes sickle cell disease.

    Show mark schemeHide mark scheme

    Model answer

    A substitution occurs in the gene for a haemoglobin polypeptide. Glutamic acid is replaced by valine. The changed haemoglobin forms fibres in low oxygen, which distorts red blood cells.

    • 1 mark for stating that a substitution occurs in the gene for a haemoglobin polypeptide
    • 1 mark for stating that glutamic acid is replaced by valine
    • 1 mark for stating that the changed haemoglobin forms fibres that distort red blood cells
  6. 6.Suggest[2 marks]

    Suggest why a base substitution does not always change the amino acid sequence of a polypeptide.

    Show mark schemeHide mark scheme

    Model answer

    Most amino acids have more than one codon. The new codon may specify the same amino acid as the original codon.

    • 1 mark for stating that most amino acids are specified by more than one codon
    • 1 mark for stating that the new codon may specify the same amino acid

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State the effect on a polypeptide of a mutation that changes an amino acid codon into a stop codon.
Show answer and explanation

Answer: D · Worked explanation

A stop codon adds no amino acid and ends the chain, so the polypeptide is shorter. Replacing one amino acid by another describes a missense mutation. A longer polypeptide would need an extra codon, and no change would need the same amino acid to be specified.
4.

Medium·Determine[1 mark]

A polypeptide has 120 amino acids. A substitution changes the codon for amino acid 45 into a stop codon. Determine the number of amino acids in the new polypeptide.
Show answer and explanation

Answer: B · Worked explanation

Amino acids 1 to 44 are added before the stop codon is reached, so the new polypeptide has 44 amino acids. The value 45 counts the stop codon as an amino acid. The value 75 is 120−45120-45120−45, the number of amino acids lost, not the number kept.
5.

Medium·Identify[1 mark]

A substitution changes the mRNA codon GGU to GGC. Both codons specify glycine. Identify this type of mutation.
Show answer and explanation

Answer: C · Worked explanation

The new codon specifies the same amino acid, so the polypeptide is unchanged. This is a silent mutation. A missense mutation would give a different amino acid. A nonsense mutation would give a stop codon, and a frameshift needs an insertion or deletion.
6.

Medium·Predict[1 mark]

Three consecutive bases that form one complete codon are deleted from the middle of a gene, and no stop codon is created. Predict the most likely effect on the polypeptide.
Show answer and explanation

Answer: B · Worked explanation

Removing a whole codon takes out one amino acid, and the later codons stay in the same groups of three. Changing every later amino acid describes a frameshift, which needs a number of bases not divisible by three. The polypeptide does change because one amino acid is lost.
7.

Medium·Predict[1 mark]

A single base is inserted near the start of the coding sequence of a gene. Predict the most likely outcome.
Show answer and explanation

Answer: C · Worked explanation

One extra base shifts the grouping into codons for the rest of the sequence, so most later amino acids differ. Only one codon changes with a substitution, not an insertion. A degenerate code cannot rescue the sequence, because the codons themselves are altered. A longer but identical chain needs three bases to be added.
8.

Hard·Evaluate[2 marks]

A student says that a mutation that changes one amino acid in a polypeptide must stop the protein working. Which evaluation is best?
Show answer and explanation

Answer: D · Worked explanation

A changed amino acid can alter folding and function, but it does not always do so. The effect depends on the amino acid and its position. Missense mutations do change the polypeptide. Sickle cell disease shows that a single substitution can change function, so the idea that only frameshifts matter is wrong.
9.

Hard·Identify[2 marks]

In the gene for a haemoglobin polypeptide, a template strand triplet 3′ CTC 5′ changes to 3′ CAC 5′. The mRNA codon GAG specifies glutamic acid and GUG specifies valine. Identify the result.
Show answer and explanation

Answer: C · Worked explanation

The template triplet 3′ CTC 5′ gives GAG and 3′ CAC 5′ gives GUG, so glutamic acid is replaced by valine. This is a missense mutation. Silent would need the same amino acid, nonsense would need a stop codon, and a frameshift would need an insertion or deletion, not a substitution.
10.

Hard·Calculate[2 marks]

A gene’s coding sequence is 303 bases long, including a stop codon, and specifies a polypeptide. Six consecutive bases are deleted inside the coding sequence, no new stop codon forms and the original stop codon is unaffected. Calculate the number of amino acids in the new polypeptide.
Show answer and explanation

Answer: C · Worked explanation

Before the deletion, 303−3=300303-3=300303−3=300 bases code for 3003=100\frac{300}{3}=1003300​=100 amino acids. After it, 297−3=294297-3=294297−3=294 bases code for 2943=98\frac{294}{3}=983294​=98 amino acids. The value 94 treats each lost base as a lost amino acid. The value 100 ignores the deletion, and 99 treats only three bases as lost.

Keep going

Next topic2.9 Amino acids and protein structurePrevious topic2.7 The genetic code

More in Topic 2 · Genes and Health

  1. 2.4Passive and active transportNotes · 10 questions
  2. 2.5Nucleotides and DNA structureNotes · 10 questions
  3. 2.6Protein synthesisNotes · 10 questions
  4. 2.7The genetic codeNotes · 10 questions
  5. 2.8Genes and polypeptidesNotes · 10 questions
  6. 2.9Amino acids and protein structureNotes · 10 questions
  7. 2.10Enzymes and activation energyNotes · 10 questions
  8. 2.11Semi-conservative DNA replicationNotes · 10 questions
  9. 2.12MutationsNotes · 10 questions

All Edexcel A-level Biology A (Salters-Nuffield) topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by Pearson Edexcel or any exam board.

On this page

0/6 read

  1. 1One gene usually codes for one polypeptide
  2. 2The order of bases sets the order of amino acids
  3. 3A gene mutation is a change in a gene’s bases
  4. 4A substitution changes one amino acid or none
  5. 5Insertions and deletions can shift every later codon
  6. 6Mutations can alter protein shape and function
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe