Edexcel A-level Biology A (Salters-Nuffield) · Topic 7 · Run for your Life
7.2 Sliding filament theory
Describe how actin and myosin interact in muscle contraction, explain the role of ATP, and outline the sequence of events in the sliding filament theory.
1/6Muscle fibres contain repeating units called sarcomeres
- Muscle fibres contain repeating units called sarcomeres
- Calcium ions expose the binding sites on actin
- Myosin heads form cross-bridges and pull actin inwards
- ATP detaches myosin heads and resets them for the next stroke
- Contraction continues until calcium ions are pumped away
- A contracting sarcomere shortens while filament lengths stay constant
- Check your recall
- Practice: 10 questions
Part 1 of 6: Muscle fibres contain repeating units called sarcomeres
Under a microscope, skeletal muscle looks striped. Each muscle fibre holds long bundles of protein filaments. Each bundle is divided into repeating units. One unit is a sarcomere, the section between two Z lines.
Two kinds of filament lie within it. Actin forms thin filaments attached to the Z lines. Myosin forms thicker filaments in the centre. The two overlap in places.
Contraction shortens the sarcomere because the filaments slide past each other. The filaments themselves keep the same length. This idea is the sliding filament theory.
Key terms · tap one for its definition
sarcomere
A sarcomere is the repeating contractile unit of a muscle fibre, lying between two adjacent Z lines.
actin
Actin is a protein that forms the thin filaments of a sarcomere and provides binding sites for myosin heads.
myosin
Myosin is a protein that forms the thick filaments of a sarcomere and has heads that bind to actin.
Part 2 of 6: Calcium ions expose the binding sites on actin
Filaments slide only when the muscle fibre receives a signal. A nerve impulse triggers release of calcium ions. They come from the sarcoplasmic reticulum, a network of membrane-bound sacs around the filaments.
In resting muscle, a thread-like protein called tropomyosin covers the binding sites on actin. Myosin heads cannot attach. Calcium ions bind to troponin, a protein attached to tropomyosin.
This binding changes the shape of troponin. Tropomyosin is pulled aside, so the binding sites on actin are exposed. Myosin heads can now attach.
Key terms · tap one for its definition
sarcoplasmic reticulum
The sarcoplasmic reticulum is a network of membrane-bound sacs in a muscle fibre that stores and releases calcium ions.
tropomyosin
Tropomyosin is a protein that lies along actin and blocks the myosin binding sites in resting muscle.
troponin
Troponin is a protein that binds calcium ions and, in doing so, moves tropomyosin away from the actin binding sites.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 3 of 6: Myosin heads form cross-bridges and pull actin inwards
With the binding sites exposed, myosin can attach. Each myosin head carries ADP and a phosphate group from earlier ATP hydrolysis. When the head binds to actin, it forms a cross-bridge between the filaments.
The head then changes angle in the power stroke. This pulls the actin filament towards the centre of the sarcomere. ADP and phosphate are released as the head tilts.
Many heads act at once on each filament. Together they produce enough force to shorten the sarcomere.
Key terms · tap one for its definition
cross-bridge
A cross-bridge is a temporary link formed when a myosin head binds to a binding site on actin.
power stroke
The power stroke is the movement of an attached myosin head that pulls the actin filament towards the sarcomere centre.
Part 4 of 6: ATP detaches myosin heads and resets them for the next stroke
After the power stroke the head is still attached, so it must be released. A molecule of ATP binds to the head. This breaks the cross-bridge, and the head detaches from actin. Without ATP the heads stay attached and the muscle stays stiff.
The head contains an enzyme, ATPase, that hydrolyses ATP to ADP and phosphate. The energy released returns the head to its original angle. It is then ready to bind again.
Key terms · tap one for its definition
ATP
ATP is a molecule that transfers usable energy to processes within cells.
ATPase
An ATPase is an enzyme that catalyses the hydrolysis of ATP to ADP and phosphate, releasing energy.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: C · Worked explanation
Part 5 of 6: Contraction continues until calcium ions are pumped away
Muscle must also relax. When the nerve impulse stops, pumps in the membrane use ATP to move calcium ions back into the sarcoplasmic reticulum. Tropomyosin then covers the binding sites again. Here is the whole sequence.
- A nerve impulse triggers release of calcium ions.
- Calcium ions bind troponin, moving tropomyosin aside.
- Myosin heads bind actin and form cross-bridges.
- Heads tilt in the power stroke and pull actin inwards.
- ATP binds, heads detach, and ATPase resets them.
- The cycle repeats while calcium ions remain.
Part 6 of 6: A contracting sarcomere shortens while filament lengths stay constant
The sliding of filaments explains the banded pattern under the microscope. The A band spans the length of the myosin filaments. The I band contains only actin. The H zone is the middle of the A band, where only myosin is present.
During contraction, actin slides inwards and the Z lines move closer. The I band and H zone narrow. The A band keeps its width because myosin does not change length.
Relaxed and contracted sarcomeres
- Feature
- Sarcomere length
- Relaxed
- Longer
- Contracted
- Shorter
- Feature
- I band
- Relaxed
- Wider
- Contracted
- Narrower
- Feature
- H zone
- Relaxed
- Present
- Contracted
- Narrower or absent
- Feature
- A band
- Relaxed
- Unchanged
- Contracted
- Unchanged
Key terms · tap one for its definition
A band
The A band is the dark band of a sarcomere that spans the full length of the myosin filaments.
I band
The I band is the part of a sarcomere that contains only actin filaments.
H zone
The H zone is the central part of the A band that contains only myosin filaments.
Check your recall[15 marks]
5 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Describe[3 marks]
Describe how calcium ions allow myosin heads to bind to actin.
Show mark schemeHide mark scheme
Model answer
Calcium ions bind to troponin and change its shape. This pulls tropomyosin away from the binding sites on actin. Myosin heads can then attach to actin.
- 1 mark for stating that calcium ions bind to troponin
- 1 mark for stating that tropomyosin is moved away from the actin binding sites
- 1 mark for stating that myosin heads can then bind to actin
- 2.Explain[4 marks]
Explain the roles of ATP in muscle contraction.
Show mark schemeHide mark scheme
Model answer
ATP binds to the myosin head and breaks the cross-bridge, so the head detaches from actin. ATPase hydrolyses ATP to ADP and phosphate. The energy released returns the head to its original angle. ATP is also used to pump calcium ions back so the muscle can relax.
- 1 mark for stating that ATP binding detaches the myosin head from actin
- 1 mark for stating that ATPase hydrolyses ATP, releasing energy
- 1 mark for explaining that the energy resets the head to its original angle
- 1 mark for stating that ATP is used to pump calcium ions back into the sarcoplasmic reticulum
- 3.Outline[4 marks]
Outline the sequence of events from the release of calcium ions to the shortening of a sarcomere.
Show mark schemeHide mark scheme
Model answer
Calcium ions bind troponin, which moves tropomyosin and exposes binding sites on actin. Myosin heads bind and form cross-bridges. The heads tilt in the power stroke and pull actin towards the centre. ATP then detaches the heads, and the cycle repeats.
- 1 mark for stating that calcium ions bind troponin and tropomyosin moves
- 1 mark for stating that myosin heads bind actin to form cross-bridges
- 1 mark for stating that the power stroke pulls actin inwards
- 1 mark for stating that ATP detaches the heads so the cycle repeats
- 4.Describe[3 marks]
Describe the changes seen in a sarcomere when a muscle contracts.
Show mark schemeHide mark scheme
Model answer
The sarcomere becomes shorter as the Z lines move closer. The I band and H zone become narrower. The A band stays the same width.
- 1 mark for stating that the sarcomere shortens and the Z lines move closer
- 1 mark for stating that the I band and H zone narrow
- 1 mark for stating that the A band stays the same width
- 5.State[1 mark]
State what happens to the lengths of the actin and myosin filaments during contraction.
Show mark schemeHide mark scheme
Model answer
Their lengths do not change.
- 1 mark for stating that neither filament changes length

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyIdentify[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumExplain[2 marks]
Show answer and explanation
Answer: D · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: A · Worked explanation
MediumPredict[2 marks]
Show answer and explanation
Answer: B · Worked explanation
MediumIdentify[2 marks]
Show answer and explanation
Answer: C · Worked explanation
HardIdentify[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardPredict[2 marks]
Show answer and explanation
Answer: A · Worked explanation
HardPredict[2 marks]
Show answer and explanation
Answer: B · Worked explanation