Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Chemistry
  3. ›S2 Models of bonding and structure
  4. ›S2.2 The covalent model

IB Chemistry · S2 · Models of bonding and structure

S2.2 The covalent model

Explain covalent bonding, draw Lewis structures, and link bond order and molecular shape to properties.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Atoms form covalent bonds by sharing electron pairs
  1. 1Atoms form covalent bonds by sharing electron pairs
  2. 2Lewis structures show bonds and outer electrons
  3. 3More shared pairs make shorter, stronger bonds
  4. 4Electron pairs determine a molecule’s three-dimensional shape
  5. 5Bond polarity and shape affect molecular properties
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Atoms form covalent bonds by sharing electron pairs

A covalent bond forms when atoms share a pair of electrons. Both nuclei attract the shared pair, holding the atoms together. A shared pair is a bonding pair. An unshared pair on one atom is a lone pair. Many atoms share enough electrons to fill their outer shells. Hydrogen usually shares enough to have two outer electrons.

In H2\mathrm{H_2}H2​, each hydrogen contributes one electron to the shared pair. Sharing does not always mean equal attraction. An atom with greater electronegativity attracts the bonding pair more strongly. This gives the bond a slightly negative end and a slightly positive end.

Common mistake

Sharing electrons does not mean transferring them completely to one atom.

Key terms · tap one for its definition

covalent bond

A covalent bond is an attraction between two nuclei and a shared pair of electrons.

bonding pair

A bonding pair is a pair of electrons shared between bonded atoms.

lone pair

A lone pair is a pair of outer-shell electrons not shared in a bond.

Part 1 done

2

Part 2 of 5: Lewis structures show bonds and outer electrons

A Lewis structure shows bonding pairs as lines and lone pairs as dots. Count all available valence electrons first. Add one electron for each negative charge. Subtract one for each positive charge. Connect the atoms with single bonds, then place the remaining electrons as lone pairs.

Check that hydrogen has two outer electrons. Most other atoms in simple structures have eight. If a central atom lacks eight, a neighbouring lone pair may form another bond. Some atoms, including boron, can have fewer than eight. Atoms in the third period and beyond can sometimes have more.

For NH4+\mathrm{NH_4^+}NH4+​, nitrogen has four bonds and no lone pairs. Draw the ion in square brackets with its overall charge. Count the electrons before drawing: nitrogen contributes five, four hydrogens contribute four, and the positive charge removes one.

Figure 1. For NH₄⁺, 5 + 4 − 1 = 8 valence electrons. Four N–H bonds use all eight, leaving no lone pairs on nitrogen. Square brackets enclose the ion, with its positive charge outside.

Key term

Lewis structure

A Lewis structure represents bonds and lone pairs using lines and dots around element symbols.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify what is shared between two atoms in a covalent bond.
Show answer and explanation

Answer: A · Worked explanation

A covalent bond forms when two atoms share a pair of electrons, and both positively charged nuclei attract that shared pair. This attraction holds the atoms together. The pair is shared rather than transferred completely to one atom, which would describe a different type of bonding.
3

Part 3 of 5: More shared pairs make shorter, stronger bonds

A single bond contains one shared pair. A double bond contains two, while a triple bond contains three. Between the same two elements, increasing bond order usually shortens and strengthens the bond. More energy is then needed to break it.

Bonds between carbon atoms

BondShared pairsRelative length and strength
SingleOneLongest and weakest
DoubleTwoIntermediate
TripleThreeShortest and strongest
Bond
Single
Shared pairs
One
Relative length and strength
Longest and weakest
Bond
Double
Shared pairs
Two
Relative length and strength
Intermediate
Bond
Triple
Shared pairs
Three
Relative length and strength
Shortest and strongest

These comparisons apply to bonds between the same elements. They do not mean that a substance containing triple bonds must have the highest boiling point. Boiling a simple molecular substance usually separates molecules without breaking their covalent bonds.

Exam tip

When comparing bond strength, name the atoms being bonded. Bond order alone cannot reliably compare bonds between different elements.

Key terms · tap one for its definition

double bond

A double bond contains two pairs of electrons shared between the same atoms.

triple bond

A triple bond contains three pairs of electrons shared between the same atoms.

Part 3 done

4

Part 4 of 5: Electron pairs determine a molecule’s three-dimensional shape

Electron pairs around a central atom repel each other and spread apart. This includes bonding pairs and lone pairs. A lone pair occupies more space around the central atom than a bonding pair. It therefore pushes nearby bonds closer together.

Four bonding regions around carbon give CH4\mathrm{CH_4}CH4​ a tetrahedral shape. Three bonding regions give BF3\mathrm{BF_3}BF3​ a trigonal planar shape. Two give CO2\mathrm{CO_2}CO2​ a linear shape. A double bond counts as one region when predicting shape.

In NH3\mathrm{NH_3}NH3​, three bonds and one lone pair give a trigonal pyramidal molecular shape. In H2O\mathrm{H_2O}H2​O, two bonds and two lone pairs give a bent shape. Shape names describe atom positions, not the positions of lone pairs.

Part 4 done

Quick check

One question on the part you just read

Easy

In a Lewis structure, what does a line between two atom symbols represent?
Show answer and explanation

Answer: A · Worked explanation

A line in a Lewis structure represents a bonding pair: two electrons shared between the bonded atoms. A lone pair is shown as dots and is not shared between atoms. The line does not represent protons or a pair of unshared electrons.
5

Part 5 of 5: Bond polarity and shape affect molecular properties

A polar bond has unequal electron sharing. Its effect on the whole molecule depends on shape. In linear CO2\mathrm{CO_2}CO2​, the two bond effects cancel. In bent H2O\mathrm{H_2O}H2​O, they do not, so the molecule is polar.

Molecules attract each other through intermolecular forces. Stronger attractions generally raise melting and boiling points. All molecules have dispersion forces. Polar molecules can also have attractions between their permanent dipoles. Water molecules form hydrogen bonds, which contribute to water’s relatively high boiling point.

Simple molecular substances usually have low melting points and do not conduct electricity. Their molecules separate fairly easily, and they lack mobile charged particles. Giant covalent structures differ: covalent bonds extend throughout a network, so melting requires breaking many strong bonds.

Common mistake

A polar bond does not always make a polar molecule. Check whether the bond effects cancel in its shape.

Key terms · tap one for its definition

polar bond

A polar bond has unequal electron sharing, giving its ends partial charges.

intermolecular forces

Intermolecular forces are attractions between molecules rather than bonds within them.

Note read

Check your recall[15 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[2 marks]

    Explain how a covalent bond holds two atoms together.

    Show mark schemeHide mark scheme

    Model answer

    The atoms share a pair of electrons. Both nuclei attract that pair, holding the atoms together.

    • 1 mark for stating that the atoms share a pair of electrons
    • 1 mark for explaining that both nuclei attract the shared pair
  2. 2.Describe[3 marks]

    Describe how to draw the Lewis structure of the ammonium ion, including its charge.

    Show mark schemeHide mark scheme

    Model answer

    There are eight available valence electrons after allowing for the positive charge. Nitrogen forms four single bonds to hydrogen and has no lone pairs. Enclose the structure in square brackets with a positive charge.

    • 1 mark for calculating eight available valence electrons
    • 1 mark for showing four nitrogen–hydrogen single bonds and no lone pairs on nitrogen
    • 1 mark for enclosing the structure in square brackets with a positive charge
  3. 3.Compare[3 marks]

    Compare single, double and triple bonds between carbon atoms.

    Show mark schemeHide mark scheme

    Model answer

    They contain one, two and three shared pairs, respectively. From single to triple, the bonds become shorter and stronger.

    • 1 mark for giving one, two and three shared pairs for single, double and triple bonds
    • 1 mark for stating that bond length decreases from single to triple
    • 1 mark for stating that bond strength increases from single to triple
  4. 4.Explain[3 marks]

    Explain why water is bent and carbon dioxide is linear.

    Show mark schemeHide mark scheme

    Model answer

    Electron regions repel and spread apart. Oxygen in water has two bonding pairs and two lone pairs; the lone pairs push the bonds into a bent shape. Carbon in carbon dioxide has two bonding regions and no lone pairs, giving a linear shape.

    • 1 mark for stating that electron regions repel and spread apart
    • 1 mark for linking water’s two bonds and two lone pairs to its bent shape
    • 1 mark for linking carbon dioxide’s two bonding regions and no lone pairs to its linear shape
  5. 5.Explain[4 marks]

    Explain why water is polar but carbon dioxide is not, and link polarity to boiling point.

    Show mark schemeHide mark scheme

    Model answer

    Both substances contain polar bonds. The bond effects cancel in linear carbon dioxide but not in bent water. Water molecules form hydrogen bonds. These intermolecular attractions contribute to water’s relatively high boiling point.

    • 1 mark for recognising that both substances contain polar bonds
    • 1 mark for explaining that the bond effects cancel in linear carbon dioxide
    • 1 mark for explaining that the bond effects do not cancel in bent water
    • 1 mark for linking hydrogen bonding between water molecules to its relatively high boiling point

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State the number of shared electron pairs in a triple covalent bond.
Show answer and explanation

Answer: B · Worked explanation

A triple covalent bond contains three shared pairs of electrons between the same two atoms. A single bond contains one shared pair and a double bond contains two. Four shared pairs would not describe a triple bond.
4.

Easy·Identify[1 mark]

Which property is typical of a simple molecular substance?
Show answer and explanation

Answer: C · Worked explanation

Simple molecular substances usually lack mobile charged particles, so they do not conduct electricity. Their molecules are held to one another by intermolecular forces rather than a network of covalent bonds. The claim that melting breaks every covalent bond confuses separating molecules with breaking bonds within them.
5.

Medium·Determine[2 marks]

An oxide ion, O2−\text{O}^{2-}O2−, has six valence electrons from oxygen and gains two electrons. Which description matches its Lewis structure?
Show answer and explanation

Answer: B · Worked explanation

The oxide ion has 6+2=86 + 2 = 86+2=8 available valence electrons. With no bonds, these form four lone pairs around oxygen, and the ion is enclosed in square brackets with its 2−2-2− charge outside. Three lone pairs and an unpaired electron would account for only seven electrons, while omitting the brackets and charge fails to show that it is an ion.
6.

Medium·Compare[2 marks]

Measurements for bonds between carbon atoms give lengths of 154 pm154\,\text{pm}154pm for C–C, 134 pm134\,\text{pm}134pm for C=C, and 120 pm120\,\text{pm}120pm for C≡C. Which comparison is consistent with these data and the covalent model?
Show answer and explanation

Answer: D · Worked explanation

The lengths decrease from C–C to C=C to C≡C, and increasing bond order between the same elements usually makes a bond shorter and stronger. Thus C≡C is the shortest and usually strongest, while C–C is the longest and usually weakest. The tempting idea that all three are equally strong overlooks the different numbers of shared electron pairs.
7.

Medium·Deduce[2 marks]

A molecule has three identical polar bonds around a central atom, with the three surrounding atoms arranged symmetrically in a trigonal planar shape. What can be deduced about the molecule’s overall polarity?
Show answer and explanation

Answer: C · Worked explanation

In a symmetrical trigonal planar molecule with three identical polar bonds, the bond effects balance, so the molecule has no overall dipole. The presence of polar bonds alone does not guarantee a polar molecule; the shape matters. Trigonal planar shape does not require a lone pair on the central atom.
8.

Medium·Deduce[1 mark]

In an H–F bond, fluorine attracts the shared electron pair more strongly than hydrogen. Deduce the charge distribution in the bond.
Show answer and explanation

Answer: B · Worked explanation

Because fluorine is more electronegative, it attracts the shared pair more strongly, giving the bond a slightly negative end at fluorine and a slightly positive end at hydrogen. The electrons are still shared, so this does not mean complete electron transfer and formation of fully charged ions. Equal sharing would not match the stated difference in attraction.
9.

Medium·Explain[2 marks]

At the same pressure, a small polar molecular substance boils at a higher temperature than a similar-sized non-polar molecular substance. Explain the most likely reason.
Show answer and explanation

Answer: B · Worked explanation

Both substances have dispersion forces, but polar molecules can also attract through permanent dipoles. These additional intermolecular attractions generally require more energy to overcome, raising the boiling point. Boiling a simple molecular substance separates molecules rather than breaking their covalent bonds; non-polar molecules still have dispersion forces.
10.

Hard·Explain[2 marks]

A student argues that a substance made of molecules containing C≡C bonds must have a higher boiling point than one containing C=C bonds, because triple bonds are stronger. Explain why this conclusion is not justified.
Show answer and explanation

Answer: A · Worked explanation

A C≡C bond is usually stronger than a C=C bond between the same elements, but boiling a simple molecular substance usually separates molecules without breaking either bond. Boiling points therefore depend mainly on intermolecular attractions, not simply on the strength of covalent bonds within the molecules. The student’s reasoning confuses intramolecular covalent bonds with intermolecular forces.

Keep going

Next topicS2.3 The metallic modelPrevious topicS2.1 The ionic model

More in S2 · Models of bonding and structure

  1. S2.1The ionic modelNotes · 10 questions
  2. S2.2The covalent modelNotes · 10 questions
  3. S2.3The metallic modelNotes · 10 questions
  4. S2.4From models to materialsNotes · 10 questions

All IB Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1Atoms form covalent bonds by sharing electron pairs
  2. 2Lewis structures show bonds and outer electrons
  3. 3More shared pairs make shorter, stronger bonds
  4. 4Electron pairs determine a molecule’s three-dimensional shape
  5. 5Bond polarity and shape affect molecular properties
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe