Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Environmental Systems and Societies
  3. ›3 Biodiversity and conservation
  4. ›3.1 Biodiversity and evolution

IB Environmental Systems and Societies · Topic 3 · Biodiversity and conservation

3.1 Biodiversity and evolution

Explain how evolution by natural selection produces biodiversity, and describe how to measure biodiversity in an area.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Biodiversity describes variety at three levels of life
  1. 1Biodiversity describes variety at three levels of life
  2. 2Natural selection changes populations over generations
  3. 3Repeated selection over long periods forms new species
  4. 4Sampling gives estimates of how many species live in an area
  5. 5Simpson’s reciprocal index gives one number for diversity
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Biodiversity describes variety at three levels of life

Compare a woodland with a car park. The woodland holds many kinds of living things, and the car park holds very few. Biodiversity describes this variety, and ecologists consider it at three levels.

  • Genetic diversity is the variety of inherited information within one species.
  • Species diversity is the number of species in an area and how evenly individuals are shared among them.
  • Ecosystem diversity is the variety of habitats and communities in a region.

Biodiversity matters in practical ways. Diverse ecosystems tend to cope better with disturbance, and they supply food, clean water and pollination. Many people also value wild species for their own sake.

Key term

biodiversity

Biodiversity is variation within species, between species, and among ecosystems.

Part 1 done

2

Part 2 of 5: Natural selection changes populations over generations

Genetic diversity is not fixed. New variation appears through mutation, which is a random change in DNA. Sexual reproduction then shuffles the alternative forms of each gene into new combinations. Each form is an allele.

Individuals whose features suit their environment tend to leave more offspring. This is natural selection. It acts only on inherited variation, so the helpful features must be passed on through alleles.

The process needs three things. Individuals must vary, they must compete for limited resources, and the differences must be inherited. If one is missing, selection cannot change the population in this way.

Figure 1. Selection needs variation, competition and inheritance. Repeated over generations, it changes the population.

Common mistake

Individuals do not evolve during their lives, and they do not change features to meet a need. Populations change across generations as helpful alleles become more common.

Key terms · tap one for its definition

mutation

A mutation is a random, permanent change in the base sequence of an organism’s DNA.

allele

An allele is one of the alternative forms of a gene, found at the same position on a chromosome.

natural selection

Natural selection is differential reproductive success associated with inherited variation.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the description of genetic diversity.
Show answer and explanation

Answer: C · Worked explanation

Genetic diversity is variation in inherited information within a single species. The number of species in a habitat describes species richness, which is a different level of biodiversity. The variety of habitats describes ecosystem diversity, and a count of individuals describes abundance rather than variety.
3

Part 3 of 5: Repeated selection over long periods forms new species

Selection within one population changes its features. Over a much longer time it can also create new kinds of organism. This long-term change is evolution.

Suppose a river or mountain range splits one population into two. Each group meets different conditions and different selection. Mutations also arise separately in each group.

After many generations the groups may differ so much that they can no longer interbreed. They are now separate species. This is speciation.

Exam tip

Link each step to biodiversity. Separation leads to different selection, which leads to new species, which raises species diversity.

Go deeperGo deeper: chance and small populations

Selection is not the only process that changes a population. In small populations, chance events can shift allele frequencies, because a few individuals may leave more offspring by luck alone.

Small populations also lose genetic diversity more easily. This makes them less able to respond if conditions change.

Key terms · tap one for its definition

evolution

Evolution is the change in the inherited characteristics of a population over successive generations.

speciation

Speciation is the formation of a new species when separated populations diverge until they can no longer interbreed.

Part 3 done

4

Part 4 of 5: Sampling gives estimates of how many species live in an area

Nobody can count every organism in a woodland, and counting would damage the habitat. Ecologists use sampling instead. They measure small, representative parts of the area and use the results to estimate the whole.

Common sampling methods

MethodSuitsHow it works
QuadratPlants, slow animalsCount organisms in a square frame placed at random
TransectChanges across a gradientSample at set points along a line
Pitfall trapGround insectsCollect animals that fall into a buried pot
Kick samplingStream invertebratesDisturb the bed and catch what drifts into a net
Method
Quadrat
Suits
Plants, slow animals
How it works
Count organisms in a square frame placed at random
Method
Transect
Suits
Changes across a gradient
How it works
Sample at set points along a line
Method
Pitfall trap
Suits
Ground insects
How it works
Collect animals that fall into a buried pot
Method
Kick sampling
Suits
Stream invertebrates
How it works
Disturb the bed and catch what drifts into a net

A simple measure is species richness, the number of species found. Richness ignores how many individuals each species has. Two sites can share the same richness yet differ in which species dominate. Species evenness describes whether numbers are similar across species.

Exam tip

Take enough samples, place them randomly and use the same effort at each site. Only then can you compare sites fairly.

Key terms · tap one for its definition

sampling

Sampling is the measurement of a representative part of an area or population to estimate values for the whole.

species richness

Species richness is the number of different species present in a sample or area.

species evenness

Species evenness is the degree to which individuals are spread equally among the species present.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the source of new alleles in a population.
Show answer and explanation

Answer: A · Worked explanation

A mutation is a random change in DNA that can create a new allele. Competition and survival of better-suited individuals act on existing variation, but they do not create new alleles. Sampling is a way to study populations, not a source of variation, so it cannot add alleles.
5

Part 5 of 5: Simpson’s reciprocal index gives one number for diversity

Richness and evenness can be combined in Simpson’s reciprocal index. The formula is D=N(N−1)∑n(n−1)D=\frac{N(N-1)}{\sum n(n-1)}D=∑n(n−1)N(N−1)​. Here NNN is the total number of individuals of all species. The symbol nnn is the number of individuals of one species.

A higher DDD means higher diversity. The lowest possible value is 1, which occurs when only one species is present.

Use the index to compare sites. Sample each site with the same method and effort. The index then shows which community is more diverse.

Worked example

Calculating the index

A sample contains five species with 10, 6, 4, 3 and 2 individuals. Calculate Simpson’s reciprocal index.
  1. 1
    Total individuals: N=10+6+4+3+2=25N=10+6+4+3+2=25N=10+6+4+3+2=25.
  2. 2
    Find n(n−1)n(n-1)n(n−1) for each species: 10×9=9010\times9=9010×9=90, 6×5=306\times5=306×5=30, 4×3=124\times3=124×3=12, 3×2=63\times2=63×2=6, 2×1=22\times1=22×1=2.
  3. 3
    Add these values: ∑n(n−1)=90+30+12+6+2=140\sum n(n-1)=90+30+12+6+2=140∑n(n−1)=90+30+12+6+2=140.
  4. 4
    Find the top line: N(N−1)=25×24=600N(N-1)=25\times24=600N(N−1)=25×24=600.
  5. 5
    Divide: D=600140≈4.3D=\frac{600}{140}\approx4.3D=140600​≈4.3.

Answer: D≈4.3D\approx4.3D≈4.3. The index has no unit.

Common mistake

Do not swap NNN and nnn. NNN covers every species in the sample, but nnn covers one species at a time.

Key term

Simpson’s reciprocal index

Simpson’s reciprocal index is a unitless measure of diversity, D=N(N−1)∑n(n−1)D=\frac{N(N-1)}{\sum n(n-1)}D=∑n(n−1)N(N−1)​, where a higher value means greater diversity.

Note read

Check your recall[15 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[3 marks]

    Define biodiversity.

    Show mark schemeHide mark scheme

    Model answer

    Biodiversity is variation within species, between species and among ecosystems.

    • 1 mark for referring to variation within species
    • 1 mark for referring to variation between species
    • 1 mark for referring to variation among ecosystems
  2. 2.Outline[4 marks]

    Outline the process of natural selection.

    Show mark schemeHide mark scheme

    Model answer

    Individuals in a population vary in inherited features. More offspring are born than can survive, so individuals compete. Those with helpful features survive and breed more often, passing helpful alleles on. Over generations these alleles become more common.

    • 1 mark for stating that individuals vary in inherited features
    • 1 mark for stating that more offspring are produced than can survive, causing competition
    • 1 mark for stating that better-suited individuals survive and reproduce more
    • 1 mark for stating that helpful alleles are passed on and become more common over generations
  3. 3.Explain[3 marks]

    Explain how separation of two populations can lead to a new species.

    Show mark schemeHide mark scheme

    Model answer

    Each separated population faces different conditions, so different features are selected. Mutations also arise separately. Over many generations the groups can no longer interbreed, forming new species.

    • 1 mark for stating that the populations face different conditions or selection
    • 1 mark for stating that mutations arise separately in each
    • 1 mark for explaining that they eventually cannot interbreed, so speciation has occurred
  4. 4.Calculate[3 marks]

    Calculate Simpson’s reciprocal index for a sample containing 8, 5 and 2 individuals of three species.

    Show mark schemeHide mark scheme

    Model answer

    N=15N=15N=15, so N(N−1)=15×14=210N(N-1)=15\times14=210N(N−1)=15×14=210. ∑n(n−1)=56+20+2=78\sum n(n-1)=56+20+2=78∑n(n−1)=56+20+2=78. D=21078≈2.7D=\frac{210}{78}\approx2.7D=78210​≈2.7.

    • 1 mark for finding N(N−1)=210N(N-1)=210N(N−1)=210
    • 1 mark for finding ∑n(n−1)=78\sum n(n-1)=78∑n(n−1)=78
    • 1 mark for dividing to obtain D≈2.7D\approx2.7D≈2.7
  5. 5.Distinguish[2 marks]

    Distinguish between species richness and species evenness.

    Show mark schemeHide mark scheme

    Model answer

    Species richness is the number of different species present. Species evenness describes how equally individuals are spread among those species.

    • 1 mark for stating that richness is the number of species
    • 1 mark for stating that evenness is how equal the numbers of individuals are across species

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the sampling method best suited to collecting insects that walk across the ground in a woodland.
Show answer and explanation

Answer: A · Worked explanation

A pitfall trap is a buried pot that catches animals walking over the ground. Kick sampling is used for invertebrates in streams, so it does not suit a woodland floor. A quadrat suits plants and slow-moving animals, so it would miss fast insects.
4.

Medium[1 mark]

A beetle population varies in colour, and the differences are inherited. Birds find pale beetles on dark soil more easily than dark beetles. Predict the change over many generations.
Show answer and explanation

Answer: A · Worked explanation

Dark beetles are eaten less often, so they survive and breed more. Their alleles become more common over generations. Individual beetles do not change colour during their lives; that idea confuses the change of a population with the change of one individual, and it is the most tempting error here.
5.

Medium[2 marks]

A sample contains three species with 6, 3 and 1 individuals. Calculate Simpson’s reciprocal index, DDD.
Show answer and explanation

Answer: A · Worked explanation

N=10N=10N=10, so N(N−1)=10×9=90N(N-1)=10\times9=90N(N−1)=10×9=90. The sum is ∑n(n−1)=30+6+0=36\sum n(n-1)=30+6+0=36∑n(n−1)=30+6+0=36. Then D=9036=2.5D=\frac{90}{36}=2.5D=3690​=2.5. The value 0.4 comes from inverting the fraction, which would make the index fall as the number of individuals rises. The value 3.3 comes from dividing the total by the number of species, which is not the formula.
6.

Medium[2 marks]

Woodland A has 5 species with 20 individuals of each. Woodland B has 5 species, with 96 individuals of one species and 1 of each other species. Identify the correct statement.
Show answer and explanation

Answer: A · Worked explanation

Both sites have the same richness, but evenness differs. For A, D=99001900≈5.2D=\frac{9900}{1900}\approx5.2D=19009900​≈5.2. For B, D=99009120≈1.1D=\frac{9900}{9120}\approx1.1D=91209900​≈1.1. Equal richness does not mean equal diversity, because dominance by one species lowers the index. Woodland B looks diverse by species count alone, but almost all its individuals belong to a single species.
7.

Medium·Explain[1 mark]

Explain why separating one population into two isolated groups can increase biodiversity over a long time.
Show answer and explanation

Answer: A · Worked explanation

Different conditions favour different features in each group. After many generations they can no longer interbreed and form new species, which raises species diversity. Mutations still occur in isolated groups, and the two groups do not evolve identically because their conditions differ.
8.

Hard[2 marks]

A student claims that giraffes evolved long necks because each generation stretched to reach leaves and passed on longer necks. Identify the correct natural selection explanation.
Show answer and explanation

Answer: C · Worked explanation

Natural selection acts on existing inherited variation, so individuals with longer necks leave more offspring. Stretching during life does not change alleles, and need does not cause matching mutations. Mutations are random and not directed by what the organism requires.
9.

Hard[2 marks]

Site X has two species with 9 and 1 individuals. Site Y has two species with 5 and 5 individuals. Determine which statement is correct.
Show answer and explanation

Answer: D · Worked explanation

Both sites have N=10N=10N=10, so N(N−1)=90N(N-1)=90N(N−1)=90. For X, ∑n(n−1)=72\sum n(n-1)=72∑n(n−1)=72, so D=1.25D=1.25D=1.25. For Y, ∑n(n−1)=40\sum n(n-1)=40∑n(n−1)=40, so D=2.25D=2.25D=2.25. Richness is equal, but Y is more even, so its index is higher. The reversed values simply swap the sites.
10.

Hard[2 marks]

Over five years, Simpson’s reciprocal index for a meadow rises from 3.1 to 4.6, while the number of species found stays at 8. Deduce the most likely change.
Show answer and explanation

Answer: D · Worked explanation

Richness is unchanged, so the rise in DDD must come from greater evenness. If one species became more dominant, DDD would fall instead of rising. A smaller sample does not by itself explain a higher index, and richness stayed at 8 throughout the five years.

Keep going

Next topic3.2 Human impact on biodiversityPrevious topic2.5 Zonation, succession and change

More in Topic 3 · Biodiversity and conservation

  1. 3.1Biodiversity and evolutionNotes · 10 questions
  2. 3.2Human impact on biodiversityNotes · 10 questions
  3. 3.3Conservation and regenerationNotes · 10 questions

All IB Environmental Systems and Societies topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1Biodiversity describes variety at three levels of life
  2. 2Natural selection changes populations over generations
  3. 3Repeated selection over long periods forms new species
  4. 4Sampling gives estimates of how many species live in an area
  5. 5Simpson’s reciprocal index gives one number for diversity
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe