IB Environmental Systems and Societies · Topic 4 · Water
4.4 Water pollution
Describe sources of water pollution, explain how pollutants affect aquatic life and human health, identify ways to measure water quality and suggest strategies to reduce pollution.
1/5Water pollution comes from point and non-point sources
- Water pollution comes from point and non-point sources
- Too many nutrients can drain a water body of oxygen
- Pollutants can harm aquatic life and human health
- Water quality can be measured with physical, chemical and biological tests
- Pollution is best reduced at its source
- Check your recall
- Practice: 10 questions
Part 1 of 5: Water pollution comes from point and non-point sources
A river can be harmed by a single pipe or by thousands of small inputs. In water, pollution usually means a harmful substance or heat entering a river, lake, sea or groundwater.
Sources fall into two types. A point source releases pollutants at one identifiable place, such as a factory pipe. A non-point source spreads them over a wide area, as when rain washes fertiliser off many fields.
- Untreated sewage, with organic waste and disease-causing organisms
- Fertilisers and manure washed from farmland
- Industrial waste, including toxic metals such as mercury and lead
- Oil and chemicals from spills and road runoff
- Plastic waste carried by rivers and drains
- Hot water from power stations, which holds less dissolved oxygen
Key terms · tap one for its definition
pollution
Pollution is the introduction of harmful substances or energy into an environment.
point source
A point source is a single, identifiable location from which a pollutant is released, such as a pipe or chimney.
non-point source
A non-point source is a diffuse origin of pollution spread over a wide area, so that no single release point can be identified.
Part 2 of 5: Too many nutrients can drain a water body of oxygen
Fertiliser and sewage add nutrients such as nitrate and phosphate. This nutrient enrichment can start eutrophication. Algae grow rapidly and may cover the surface.
Algae block light, so plants below die. Decomposers then feed on the dead material and use up dissolved oxygen. Fish and other animals can no longer breathe.
The oxygen loss can be measured. Biochemical oxygen demand (BOD) shows how much oxygen microorganisms need to break down organic matter in a water sample. A higher BOD means more organic matter.
Worked example
Calculating biochemical oxygen demand
- Use the word equation: BOD = initial dissolved oxygen minus final dissolved oxygen.
- Write the symbol equation: , where DO is dissolved oxygen.
- Substitute: .
Answer: The BOD is .
Key terms · tap one for its definition
eutrophication
Eutrophication is the enrichment of a water body with nutrients, causing excessive algal growth and later a fall in dissolved oxygen.
biochemical oxygen demand
Biochemical oxygen demand is the dissolved oxygen, in , used by microorganisms to decompose organic matter in a sample over a set time.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 3 of 5: Pollutants can harm aquatic life and human health
Oxygen loss is only one way pollution harms life. Toxic metals and some pesticides persist in the environment. Organisms take them up faster than they lose them, a build-up called bioaccumulation.
Predators eat many contaminated prey. The substance becomes more concentrated at each step up a food chain, which is biomagnification.
Humans are affected too. Sewage can carry organisms that cause illnesses such as cholera. Toxic metals can damage the nervous system, and eating contaminated fish passes pollutants to people. High nitrate levels in drinking water can harm infants.
Key terms · tap one for its definition
bioaccumulation
Bioaccumulation is the build-up of a substance in an organism’s tissues when it is taken in faster than it is lost.
biomagnification
Biomagnification is the increase in concentration of a persistent substance in organisms at each successive step up a food chain.
Part 4 of 5: Water quality can be measured with physical, chemical and biological tests
To manage pollution, people first need to measure it. Samples can be tested at the site or in a laboratory.
- Chemical tests: dissolved oxygen, nitrate, phosphate, pH and BOD
- Physical tests: temperature and turbidity
- Biological tests: indicator species and the range of organisms present
An indicator species needs particular conditions to survive. Mayfly nymphs need clean, well-oxygenated water. Sludge worms tolerate low oxygen and become common in polluted sections.
Key terms · tap one for its definition
turbidity
Turbidity is the cloudiness of water caused by suspended particles, which reduces the light that can pass through it.
indicator species
An indicator species is a species whose presence, absence or abundance reflects the environmental conditions of a habitat.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 5 of 5: Pollution is best reduced at its source
Once the sources are known, strategies can target each one. The best approach prevents pollution, then controls what is released, and finally cleans up the damage.
Strategies for common sources
- Source
- Sewage
- Strategy
- Treat waste before release and repair leaking sewers
- Source
- Farmland
- Strategy
- Apply less fertiliser and keep vegetation strips beside streams
- Source
- Industry
- Strategy
- Treat liquid waste, recycle water and enforce discharge limits
- Source
- Plastic
- Strategy
- Reduce use and improve collection and recycling
- Source
- Oil
- Strategy
- Safer transport, containment booms and rapid clean-up
Laws, fines and monitoring make these measures work. Public education also helps, because many non-point inputs come from everyday actions. Restoring wetlands can filter nutrients from water before they reach a lake. Prevention usually costs less than repairing a damaged ecosystem.
Check your recall[15 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Describe[3 marks]
Describe three common sources of water pollution.
Show mark schemeHide mark scheme
Model answer
Untreated sewage adds organic waste and disease-causing organisms. Fertilisers washed from farmland add nutrients. Industrial waste can add toxic metals, and oil spills or plastic waste also pollute water.
- 1 mark for describing a source such as sewage and what it adds
- 1 mark for describing a second source such as farmland runoff, industry, oil or plastic
- 1 mark for describing a third distinct source
- 2.Explain[3 marks]
Explain how nutrient enrichment of a lake can kill fish.
Show mark schemeHide mark scheme
Model answer
Extra nutrients cause rapid algal growth. When the algae die, decomposers use dissolved oxygen to break them down. The oxygen level falls so low that fish cannot survive.
- 1 mark for stating that nutrients cause rapid algal growth
- 1 mark for stating that decomposers break down dead algae and use oxygen
- 1 mark for concluding that low dissolved oxygen kills fish
- 3.Calculate[2 marks]
Calculate the BOD of a sample whose dissolved oxygen falls from to over five days.
Show mark schemeHide mark scheme
Model answer
.
- 1 mark for subtracting the final from the initial dissolved oxygen
- 1 mark for giving
- 4.Distinguish[2 marks]
Distinguish between a point source and a non-point source of pollution.
Show mark schemeHide mark scheme
Model answer
A point source releases pollutants at one identifiable place, such as a factory pipe. A non-point source spreads pollutants over a wide area, such as runoff from many fields.
- 1 mark for stating that a point source has a single identifiable release location
- 1 mark for stating that a non-point source is spread over a wide area
- 5.Outline[2 marks]
Outline two ways to assess the water quality of a river.
Show mark schemeHide mark scheme
Model answer
Measure the dissolved oxygen or nitrate concentration with chemical tests. Survey indicator species such as mayfly nymphs and sludge worms.
- 1 mark for outlining a chemical or physical measurement
- 1 mark for outlining a biological method such as indicator species
- 6.Discuss[3 marks]
Discuss strategies to reduce water pollution from farmland and from sewage.
Show mark schemeHide mark scheme
Model answer
For farmland, using less fertiliser and keeping vegetation strips beside streams reduces nutrient runoff. For sewage, treatment before release and repairs to leaking sewers reduce discharge. Laws and monitoring make both work.
- 1 mark for describing a strategy for farmland
- 1 mark for describing a strategy for sewage
- 1 mark for linking strategies to enforcement or a limitation

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
Easy[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: D · Worked explanation
MediumExplain[1 mark]
Show answer and explanation
Answer: C · Worked explanation
Medium[1 mark]
Show answer and explanation
Answer: B · Worked explanation
Medium[1 mark]
Show answer and explanation
Answer: A · Worked explanation
HardDeduce[2 marks]
Show answer and explanation
Answer: C · Worked explanation
Hard[1 mark]
Show answer and explanation
Answer: D · Worked explanation
Hard[1 mark]
Show answer and explanation
Answer: A · Worked explanation