Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Mathematics: Analysis and Approaches
  3. ›4 Statistics and probability
  4. ›4.3 Measures of central tendency and spread

IB Mathematics: Analysis and Approaches · Topic 4 · Statistics and probability

4.3 Measures of central tendency and spread

Calculate the mean, median and mode, find the range, interquartile range and standard deviation, and compare these measures.

  • 5 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5The mean, median and mode describe the centre of data
  1. 1The mean, median and mode describe the centre of data
  2. 2A frequency table gives the mean without listing every value
  3. 3Range and interquartile range measure how spread out data are
  4. 4Standard deviation measures typical distance from the mean
  5. 5Transformations and extreme values affect each measure differently
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: The mean, median and mode describe the centre of data

Five friends count the messages they sent today: 3, 5, 5, 8 and 12. A single number can summarise the group. Measures of central tendency give that typical value.

The mean is the total divided by the number of values, so xˉ=∑xn\bar{x}=\frac{\sum x}{n}xˉ=n∑x​. Here the total is 33 and n=5n=5n=5, giving a mean of 6.6.

The median is the middle value once the data are in order, which is 5 here. The mode is the value that occurs most often, which is also 5.

Exam tip

With an even number of values, the median is the mean of the two middle values. Always put the data in order first.

Key terms · tap one for its definition

mean

The mean xˉ\bar{x}xˉ of a data set is the sum of the values divided by the number of values.

median

The median is the middle value of ordered data, or the mean of the two middle values when nnn is even.

mode

The mode is the value, or class, with the greatest frequency in a data set.

Part 1 done

2

Part 2 of 5: A frequency table gives the mean without listing every value

Now suppose the data arrive as counts. A frequency table lists each value xxx with its frequency fff, the number of times it occurs. The mean is then xˉ=∑fxn\bar{x}=\frac{\sum fx}{n}xˉ=n∑fx​, where n=∑fn=\sum fn=∑f. Averaging the listed values alone would ignore how often each occurs.

Frequencies also locate the median. Add them as a running total, then find which value holds the middle position.

For grouped data, use the midpoint of each class as xxx. The result is only an estimate, because the exact values are unknown.

Worked example

Mean, median and mode from frequencies

The values 1, 2, 3 and 4 have frequencies 2, 5, 6 and 2. Find the mean, median and mode.
  1. 1
    Find n=∑f=2+5+6+2=15n=\sum f=2+5+6+2=15n=∑f=2+5+6+2=15.
  2. 2
    Find ∑fx=1×2+2×5+3×6+4×2=38\sum fx=1\times2+2\times5+3\times6+4\times2=38∑fx=1×2+2×5+3×6+4×2=38.
  3. 3
    Mean: xˉ=3815≈2.53\bar{x}=\frac{38}{15}\approx2.53xˉ=1538​≈2.53.
  4. 4
    Running totals are 2, 7, 13 and 15. The 8th value lies in the group with value 3, so the median is 3.
  5. 5
    The greatest frequency is 6, at the value 3.

Answer: The mean is xˉ≈2.53\bar{x}\approx2.53xˉ≈2.53, the median is 3 and the mode is 3.

Part 2 done

Quick check

One question on the part you just read

Easy

Determine the median of 7, 3, 9, 1, 6.
Show answer and explanation

Answer: B · Worked explanation

Ordering the data gives 1, 3, 6, 7, 9, so the middle value is 6. The value 5.2 is the mean, found by dividing the total of 26 by 5. The value 9 is the middle entry of the unordered list, which ignores the need to sort first.
3

Part 3 of 5: Range and interquartile range measure how spread out data are

Two classes can share a mean but differ greatly in how scattered their marks are. A measure of spread captures this. The range is the greatest value minus the least value.

The range uses only two values, so one extreme value distorts it. Quartiles give a steadier picture. A quartile is one of three values that split ordered data into four equal parts.

The lower quartile Q1Q_1Q1​ is the median of the lower half. The upper quartile Q3Q_3Q3​ is the median of the upper half. The interquartile range is IQR=Q3−Q1\mathrm{IQR}=Q_3-Q_1IQR=Q3​−Q1​, the spread of the middle half.

Figure 1. The box spans the interquartile range, and the whiskers run to the least and greatest values.

The data 2, 4, 5, 6, 7, 8, 9, 11, 12, 13, 15 have Q1=5Q_1=5Q1​=5, median 8 and Q3=12Q_3=12Q3​=12. The range is 13 and the IQR is 7.

Key terms · tap one for its definition

range

The range is the difference between the greatest and least values in a data set.

quartile

A quartile is one of three values, Q1Q_1Q1​, Q2Q_2Q2​ and Q3Q_3Q3​, that divide ordered data into four equal parts.

interquartile range

The interquartile range is the difference between the upper and lower quartiles, IQR=Q3−Q1\mathrm{IQR}=Q_3-Q_1IQR=Q3​−Q1​.

Part 3 done

4

Part 4 of 5: Standard deviation measures typical distance from the mean

The IQR ignores the outer quarters of the data. Standard deviation uses every value. It measures how far values typically lie from the mean.

Find each value’s distance from the mean, then square it. Average the squares and take the square root. The standard deviation is σ=∑f(x−xˉ)2n\sigma=\sqrt{\frac{\sum f(x-\bar{x})^2}{n}}σ=n∑f(x−xˉ)2​​.

Squaring removes negative signs. The average squared distance is the variance, σ2\sigma^2σ2. Standard deviation is its square root, so it has the same units as the data.

Worked example

Standard deviation by hand

Find the standard deviation of 2, 4, 4, 4, 5, 5, 7, 9.
  1. 1
    Mean: xˉ=408=5\bar{x}=\frac{40}{8}=5xˉ=840​=5.
  2. 2
    Squared distances from 5 are 9, 1, 1, 1, 0, 0, 4 and 16, which total 32.
  3. 3
    Variance: σ2=328=4\sigma^2=\frac{32}{8}=4σ2=832​=4.
  4. 4
    Standard deviation: σ=4=2\sigma=\sqrt{4}=2σ=4​=2.

Answer: The standard deviation is σ=2\sigma=2σ=2.

Exam tip

A calculator gives σ\sigmaσ from its one-variable statistics. Read the population value, usually labelled σx\sigma_xσx​.

Key terms · tap one for its definition

standard deviation

The standard deviation σ\sigmaσ is the square root of the mean squared distance of the values from the mean.

variance

The variance is the square of the standard deviation, σ2\sigma^2σ2, the mean squared distance from the mean.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the mode of 1, 2, 2, 4, 6, 6, 6.
Show answer and explanation

Answer: C · Worked explanation

The value 6 occurs three times, more often than any other value, so it is the mode. The value 4 is the median, the middle of the seven ordered values. The value 3.9 is the mean, since 277≈3.86\frac{27}{7}\approx3.86727​≈3.86. Check the frequencies first, since the mode is the value that occurs most often, not the largest value.
5

Part 5 of 5: Transformations and extreme values affect each measure differently

Suppose every value in a set rises by a constant kkk. The mean and median rise by kkk. The range, IQR and σ\sigmaσ stay the same.

Multiplying every value by k>0k>0k>0 multiplies the mean, median, range, IQR and σ\sigmaσ by kkk.

An outlier is a value far from the rest. A common test marks a value as an outlier if it lies more than 1.5×IQR1.5\times\mathrm{IQR}1.5×IQR above Q3Q_3Q3​ or below Q1Q_1Q1​.

How each measure responds to an extreme value

MeasurePulled by an outlier?Suits
MeanYesSymmetric data
MedianLittleSkewed data
RangeYesQuick check of extremes
IQRLittleSpread beside the median
σ\sigmaσYesSpread beside the mean
Measure
Mean
Pulled by an outlier?
Yes
Suits
Symmetric data
Measure
Median
Pulled by an outlier?
Little
Suits
Skewed data
Measure
Range
Pulled by an outlier?
Yes
Suits
Quick check of extremes
Measure
IQR
Pulled by an outlier?
Little
Suits
Spread beside the median
Measure
σ\sigmaσ
Pulled by an outlier?
Yes
Suits
Spread beside the mean

Pair the mean with σ\sigmaσ, and the median with the IQR. Choose the pair that suits the shape of the data.

Common mistake

An outlier is not automatically an error. Check why the value is extreme before removing it.

Key term

outlier

An outlier is a value lying more than 1.5×IQR1.5\times\mathrm{IQR}1.5×IQR above the upper quartile or below the lower quartile.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Calculate[3 marks]

    Calculate the mean and the median of 4, 6, 6, 9, 10, 13.

    Show mark schemeHide mark scheme

    Model answer

    The total is 48, so the mean is 486=8\frac{48}{6}=8648​=8. The two middle values are 6 and 9, so the median is 6+92=7.5\frac{6+9}{2}=7.526+9​=7.5.

    • 1 mark for summing the values to get 48 and dividing by 6 to obtain a mean of 8
    • 1 mark for identifying 6 and 9 as the two middle values
    • 1 mark for finding the median as 7.5
  2. 2.Determine[2 marks]

    Determine the range and the interquartile range of a data set with least value 3, Q1=9Q_1=9Q1​=9, median 14, Q3=20Q_3=20Q3​=20 and greatest value 31.

    Show mark schemeHide mark scheme

    Model answer

    Range =31−3=28=31-3=28=31−3=28. IQR=20−9=11\mathrm{IQR}=20-9=11IQR=20−9=11.

    • 1 mark for finding the range as 28
    • 1 mark for finding the interquartile range as 11
  3. 3.Determine[3 marks]

    Determine whether a value of 30 is an outlier when Q1=6Q_1=6Q1​=6 and Q3=14Q_3=14Q3​=14.

    Show mark schemeHide mark scheme

    Model answer

    IQR=14−6=8\mathrm{IQR}=14-6=8IQR=14−6=8, so 1.5×8=121.5\times8=121.5×8=12. The upper boundary is 14+12=2614+12=2614+12=26. Since 30 is greater than 26, it is an outlier.

    • 1 mark for finding the IQR as 8
    • 1 mark for finding the upper boundary as 26
    • 1 mark for concluding that 30 is an outlier because it exceeds 26
  4. 4.Distinguish[2 marks]

    Distinguish between what the range and the standard deviation tell you about a data set.

    Show mark schemeHide mark scheme

    Model answer

    The range uses only the greatest and least values, so it is strongly affected by extreme values. The standard deviation uses every value to show the typical distance from the mean.

    • 1 mark for stating that the range depends only on the two extreme values
    • 1 mark for stating that the standard deviation uses all values to measure typical distance from the mean
  5. 5.Determine[3 marks]

    Determine the new mean and standard deviation when every value of a data set with mean 10 and standard deviation 3 is multiplied by 2 and then increased by 4.

    Show mark schemeHide mark scheme

    Model answer

    The new mean is 2×10+4=242\times10+4=242×10+4=24. The standard deviation is multiplied by 2 to give 6. Adding 4 does not change the spread.

    • 1 mark for finding the new mean as 2×10+4=242\times10+4=242×10+4=24
    • 1 mark for finding the new standard deviation as 2×3=62\times3=62×3=6
    • 1 mark for stating that adding a constant does not change the standard deviation
  6. 6.Explain[2 marks]

    Explain why the median can describe a typical value better than the mean when a data set has one very large value.

    Show mark schemeHide mark scheme

    Model answer

    The mean uses every value, so the very large value pulls it upwards. The median depends only on the middle position, so it changes little.

    • 1 mark for stating that the large value pulls the mean towards it
    • 1 mark for stating that the median depends on the middle position and is barely affected

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Calculate[1 mark]

Calculate the range of a data set with least value 4 and greatest value 19.
Show answer and explanation

Answer: A · Worked explanation

The range is the greatest value minus the least value, so 19−4=1519-4=1519−4=15. Adding the extremes gives 23, which is not a measure of spread. The value 11.5 is the midpoint of the extremes, found by halving that sum, and it does not measure spread either.
4.

Medium·Calculate[2 marks]

Calculate the mean of a data set in which the value 10 occurs 2 times, the value 20 occurs 5 times and the value 30 occurs 3 times.
Show answer and explanation

Answer: B · Worked explanation

The total is 10×2+20×5+30×3=21010\times2+20\times5+30\times3=21010×2+20×5+30×3=210 across n=10n=10n=10 values, so the mean is 21. The value 20 is the unweighted mean of 10, 20 and 30, which ignores the frequencies. The value 210 is the total, not yet divided by nnn. Always multiply each value by its frequency before adding.
5.

Medium·Determine[2 marks]

Every value in a data set is multiplied by 3 and then 5 is subtracted. The original mean is 12 and the standard deviation is 3. Determine the new mean and standard deviation.
Show answer and explanation

Answer: A · Worked explanation

The mean follows both operations, so 3×12−5=313\times12-5=313×12−5=31. Subtracting 5 does not change the spread, but multiplying by 3 multiplies σ\sigmaσ by 3, giving 9. The pair 31 and 4 wrongly subtracts 5 from the standard deviation as well, since 3×3−5=43\times3-5=43×3−5=4.
6.

Medium·Calculate[2 marks]

Calculate the standard deviation σ\sigmaσ of 1, 3, 5, 7, correct to 3 significant figures.
Show answer and explanation

Answer: A · Worked explanation

The mean is 4 and the squared distances are 9, 1, 1 and 9, which total 20. The variance is 204=5\frac{20}{4}=5420​=5, so σ=5≈2.24\sigma=\sqrt{5}\approx2.24σ=5​≈2.24. The value 5.00 is the variance, which has not been square-rooted. The value 4.47 is 20\sqrt{20}20​, which forgets to divide the total by 4 before taking the square root.
7.

Medium·Determine[2 marks]

A data set has Q1=14Q_1=14Q1​=14 and Q3=26Q_3=26Q3​=26. A value is an outlier if it is more than 1.5×IQR1.5\times\mathrm{IQR}1.5×IQR above Q3Q_3Q3​. Determine the smallest whole number that is an outlier.
Show answer and explanation

Answer: B · Worked explanation

IQR=26−14=12\mathrm{IQR}=26-14=12IQR=26−14=12 and 1.5×12=181.5\times12=181.5×12=18, so the boundary is 26+18=4426+18=4426+18=44. A value must be more than 44, so the smallest whole number is 45. The value 44 lies exactly on the boundary. The value 65 wrongly adds 1.5×261.5\times261.5×26 to Q3Q_3Q3​. Check the boundary case carefully, because outliers must exceed the limit, not merely reach it.
8.

Hard[2 marks]

Two classes both have a mean mark of 50. Class A has σ=4\sigma=4σ=4 and class B has σ=12\sigma=12σ=12. Which conclusion is justified?
Show answer and explanation

Answer: A · Worked explanation

A larger σ\sigmaσ means values lie further from the mean on average, so class B is more spread out. Standard deviation measures spread, not level, so it cannot show which class scored higher. Equal means also do not force equal medians, which depend on the shape of the data.
9.

Hard[2 marks]

The data 4, 5, 5, 6, 7, 8 gain a seventh value, 40. Which measure changes least?
Show answer and explanation

Answer: D · Worked explanation

The median moves from 5.5 to 6, a change of 0.5. The mean rises from about 5.83 to about 10.71, and the range rises from 4 to 36. The standard deviation also increases sharply, so the mean, range and standard deviation are all pulled strongly by the extreme value.
10.

Hard·Determine[2 marks]

The mean of four values is 12. A fifth value is added and the mean becomes 14. Determine the fifth value.
Show answer and explanation

Answer: A · Worked explanation

The first four values total 4×12=484\times12=484×12=48. The five values now total 5×14=705\times14=705×14=70, so the fifth is 70−48=2270-48=2270−48=22. The value 26 comes from adding the two means, which ignores that they refer to different numbers of values. The value 14 assumes the new value equals the new mean.

Keep going

Next topic4.4 Correlation and regressionPrevious topic4.2 Presenting data

More in Topic 4 · Statistics and probability

  1. 4.1Sampling conceptsNotes · 10 questions
  2. 4.2Presenting dataNotes · 10 questions
  3. 4.3Measures of central tendency and spreadNotes · 10 questions
  4. 4.4Correlation and regressionNotes · 10 questions
  5. 4.5Probability conceptsNotes · 10 questions
  6. 4.6Combined events and diagramsNotes · 10 questions
  7. 4.7Discrete random variablesNotes · 10 questions
  8. 4.8Binomial distributionNotes · 10 questions
  9. 4.9Normal distributionNotes · 10 questions

All IB Mathematics: Analysis and Approaches topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1The mean, median and mode describe the centre of data
  2. 2A frequency table gives the mean without listing every value
  3. 3Range and interquartile range measure how spread out data are
  4. 4Standard deviation measures typical distance from the mean
  5. 5Transformations and extreme values affect each measure differently
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe