Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Mathematics: Applications and Interpretation
  3. ›3 Geometry and trigonometry
  4. ›3.13 Scalar and vector products

IB Mathematics: Applications and Interpretation · Topic 3 · Geometry and trigonometry

3.13 Scalar and vector products

Calculate scalar and vector products, use the scalar product to find angles, and interpret the direction and magnitude of the vector product.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
  • HL only
Start a Quick 5 on this topic→Jump to the 10 questions
1/5The scalar product multiplies vectors to give a number
  1. 1The scalar product multiplies vectors to give a number
  2. 2The scalar product connects to the angle between vectors
  3. 3A zero scalar product means the vectors are perpendicular
  4. 4The vector product gives a vector perpendicular to both
  5. 5The magnitude of the vector product gives an area
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: The scalar product multiplies vectors to give a number

Multiplying two numbers gives one number. Vectors can also be multiplied, but in two different ways. A product is an expression formed by multiplying two factors.

The first way gives a single number. Multiply matching components, then add the results. This is the scalar product, written v⋅w\mathbf{v}\cdot\mathbf{w}v⋅w.

For three-dimensional vectors, v⋅w=v1w1+v2w2+v3w3\mathbf{v}\cdot\mathbf{w}=v_1w_1+v_2w_2+v_3w_3v⋅w=v1​w1​+v2​w2​+v3​w3​. The same pattern works in two dimensions with two terms. The result can be positive, negative or zero.

Worked example

Finding a scalar product

Find v⋅w\mathbf{v}\cdot\mathbf{w}v⋅w for v=(231)\mathbf{v}=\begin{pmatrix}2\\3\\1\end{pmatrix}v=​231​​ and w=(4−15)\mathbf{w}=\begin{pmatrix}4\\-1\\5\end{pmatrix}w=​4−15​​.
  1. 1
    Multiply matching components: 2×4=82\times4=82×4=8, 3×(−1)=−33\times(-1)=-33×(−1)=−3 and 1×5=51\times5=51×5=5.
  2. 2
    Add the results: 8+(−3)+5=108+(-3)+5=108+(−3)+5=10.

Answer: v⋅w=10\mathbf{v}\cdot\mathbf{w}=10v⋅w=10, a single number.

Common mistake

The scalar product is a number, not a vector. Do not write the answer as a column.

Key terms · tap one for its definition

product

A product is an expression formed by multiplying two factors.

scalar product

The scalar product, also called the dot product, of two vectors is the number v1w1+v2w2+v3w3v_1w_1+v_2w_2+v_3w_3v1​w1​+v2​w2​+v3​w3​ in three dimensions.

Part 1 done

2

Part 2 of 5: The scalar product connects to the angle between vectors

Now bring in geometry. Place both vectors tail to tail. The angle between two vectors is the angle θ\thetaθ between their directions. Both vectors must be non-zero for this angle to make sense.

The scalar product also equals v⋅w=∣v∣∣w∣cos⁡θ\mathbf{v}\cdot\mathbf{w}=|\mathbf{v}||\mathbf{w}|\cos\thetav⋅w=∣v∣∣w∣cosθ. Here ∣v∣|\mathbf{v}|∣v∣ is the magnitude, or length, of v\mathbf{v}v. In three dimensions, ∣v∣=v12+v22+v32|\mathbf{v}|=\sqrt{v_1^2+v_2^2+v_3^2}∣v∣=v12​+v22​+v32​​.

Rearranging gives cos⁡θ=v⋅w∣v∣∣w∣\cos\theta=\frac{\mathbf{v}\cdot\mathbf{w}}{|\mathbf{v}||\mathbf{w}|}cosθ=∣v∣∣w∣v⋅w​. Find the scalar product, then both magnitudes, then take the inverse cosine. If cos⁡θ\cos\thetacosθ comes out beyond -1 or 1, recheck the arithmetic.

Worked example

Finding an angle

Find the angle between v=(340)\mathbf{v}=\begin{pmatrix}3\\4\\0\end{pmatrix}v=​340​​ and w=(403)\mathbf{w}=\begin{pmatrix}4\\0\\3\end{pmatrix}w=​403​​.
  1. 1
    Scalar product: v⋅w=12+0+0=12\mathbf{v}\cdot\mathbf{w}=12+0+0=12v⋅w=12+0+0=12.
  2. 2
    Magnitudes: ∣v∣=9+16=5|\mathbf{v}|=\sqrt{9+16}=5∣v∣=9+16​=5 and ∣w∣=16+9=5|\mathbf{w}|=\sqrt{16+9}=5∣w∣=16+9​=5.
  3. 3
    Substitute: cos⁡θ=125×5=0.48\cos\theta=\frac{12}{5\times5}=0.48cosθ=5×512​=0.48.
  4. 4
    Take the inverse cosine: θ=cos⁡−1(0.48)\theta=\cos^{-1}(0.48)θ=cos−1(0.48).

Answer: θ≈61.3∘\theta\approx61.3^{\circ}θ≈61.3∘.

Exam tip

Check that your calculator is in degree mode before taking an inverse cosine, unless the question asks for radians.

Go deeperWhy cosine appears

The quantity ∣w∣cos⁡θ|\mathbf{w}|\cos\theta∣w∣cosθ is the length of the shadow of w\mathbf{w}w along v\mathbf{v}v. The scalar product multiplies that shadow by ∣v∣|\mathbf{v}|∣v∣.

When the vectors point the same way, the shadow is the full length of w\mathbf{w}w. The product is then as large as it can be.

Key term

angle between two vectors

The angle between two vectors is the angle θ\thetaθ, with 0∘≤θ≤180∘0^{\circ}\le\theta\le180^{\circ}0∘≤θ≤180∘, measured when both vectors start at the same point.

Part 2 done

Quick check

One question on the part you just read

Easy

Calculate the scalar product of (12)\begin{pmatrix}1\\2\end{pmatrix}(12​) and (34)\begin{pmatrix}3\\4\end{pmatrix}(34​).
Show answer and explanation

Answer: A · Worked explanation

Multiply matching components and add: 1×3+2×4=3+8=111\times3+2\times4=3+8=111×3+2×4=3+8=11. The value 10 comes from adding all four numbers together, and 24 comes from multiplying all four, so neither follows the rule. Pairing the first components gives 3, and pairing the second components gives 8.
3

Part 3 of 5: A zero scalar product means the vectors are perpendicular

Look again at the formula. If θ=90∘\theta=90^{\circ}θ=90∘, then cos⁡θ=0\cos\theta=0cosθ=0, so the scalar product is zero. This gives a quick test for perpendicular vectors.

Sign of the scalar product and the angle between two non-zero vectors

Scalar productAngleDescription
Positiveθ<90∘\theta<90^{\circ}θ<90∘Acute
Zeroθ=90∘\theta=90^{\circ}θ=90∘Perpendicular
Negative90∘<θ≤180∘90^{\circ}<\theta\le180^{\circ}90∘<θ≤180∘Obtuse or straight
Scalar product
Positive
Angle
θ<90∘\theta<90^{\circ}θ<90∘
Description
Acute
Scalar product
Zero
Angle
θ=90∘\theta=90^{\circ}θ=90∘
Description
Perpendicular
Scalar product
Negative
Angle
90∘<θ≤180∘90^{\circ}<\theta\le180^{\circ}90∘<θ≤180∘
Description
Obtuse or straight

The sign tells you about the angle without any calculation. A negative product means the vectors point partly against each other.

Parallel vectors give the extreme cases. Their angle is 0∘0^{\circ}0∘ or 180∘180^{\circ}180∘, so cos⁡θ=±1\cos\theta=\pm1cosθ=±1. The scalar product is then ±∣v∣∣w∣\pm|\mathbf{v}||\mathbf{w}|±∣v∣∣w∣.

To test a pair of vectors, calculate the scalar product and compare it with zero. Do not find the angle unless the question asks for it.

Worked example

Using the perpendicular test

Determine kkk so that (2k1)\begin{pmatrix}2\\ k\\1\end{pmatrix}​2k1​​ and (34−2)\begin{pmatrix}3\\4\\-2\end{pmatrix}​34−2​​ are perpendicular.
  1. 1
    Perpendicular vectors have scalar product zero: 6+4k−2=06+4k-2=06+4k−2=0.
  2. 2
    Simplify: 4k+4=04k+4=04k+4=0.

Answer: k=−1k=-1k=−1.

Key term

perpendicular vectors

Perpendicular vectors are two non-zero vectors whose scalar product is zero, so the angle between them is 90∘90^{\circ}90∘.

Part 3 done

4

Part 4 of 5: The vector product gives a vector perpendicular to both

The second way of multiplying gives a vector, not a number. The vector product of v\mathbf{v}v and w\mathbf{w}w is written v×w\mathbf{v}\times\mathbf{w}v×w. It is defined for three-dimensional vectors. Unlike the scalar product, it has a direction.

In components, v×w=(v2w3−v3w2v3w1−v1w3v1w2−v2w1)\mathbf{v}\times\mathbf{w}=\begin{pmatrix}v_2w_3-v_3w_2\\ v_3w_1-v_1w_3\\ v_1w_2-v_2w_1\end{pmatrix}v×w=​v2​w3​−v3​w2​v3​w1​−v1​w3​v1​w2​−v2​w1​​​. The result is perpendicular to both v\mathbf{v}v and w\mathbf{w}w. A useful check is that its scalar product with either original vector is zero.

Its direction follows the right-hand rule. Curl your fingers from v\mathbf{v}v towards w\mathbf{w}w, and your thumb points along v×w\mathbf{v}\times\mathbf{w}v×w.

Worked example

Finding a vector product

Find v×w\mathbf{v}\times\mathbf{w}v×w for v=(123)\mathbf{v}=\begin{pmatrix}1\\2\\3\end{pmatrix}v=​123​​ and w=(456)\mathbf{w}=\begin{pmatrix}4\\5\\6\end{pmatrix}w=​456​​.
  1. 1
    First component: 2×6−3×5=12−15=−32\times6-3\times5=12-15=-32×6−3×5=12−15=−3.
  2. 2
    Second component: 3×4−1×6=12−6=63\times4-1\times6=12-6=63×4−1×6=12−6=6.
  3. 3
    Third component: 1×5−2×4=5−8=−31\times5-2\times4=5-8=-31×5−2×4=5−8=−3.
  4. 4
    Check with the scalar product: v⋅(v×w)=−3+12−9=0\mathbf{v}\cdot(\mathbf{v}\times\mathbf{w})=-3+12-9=0v⋅(v×w)=−3+12−9=0.

Answer: v×w=(−36−3)\mathbf{v}\times\mathbf{w}=\begin{pmatrix}-3\\6\\-3\end{pmatrix}v×w=​−36−3​​.

Common mistake

Order matters for the vector product. Swapping the vectors reverses the direction, so w×v=−(v×w)\mathbf{w}\times\mathbf{v}=-(\mathbf{v}\times\mathbf{w})w×v=−(v×w).

Key term

vector product

The vector product, also called the cross product, of two three-dimensional vectors is a vector perpendicular to both.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the type of quantity produced by the scalar product of two vectors.
Show answer and explanation

Answer: D · Worked explanation

The scalar product multiplies matching components and adds them, leaving a single number with no direction. It is not an angle, although it can be used to find one. A vector would need several components, but this result is one value.
5

Part 5 of 5: The magnitude of the vector product gives an area

The length of v×w\mathbf{v}\times\mathbf{w}v×w also has a geometric meaning. It is ∣v×w∣=∣v∣∣w∣sin⁡θ|\mathbf{v}\times\mathbf{w}|=|\mathbf{v}||\mathbf{w}|\sin\theta∣v×w∣=∣v∣∣w∣sinθ. This equals the area of the parallelogram with sides v\mathbf{v}v and w\mathbf{w}w. Its units are squared lengths, such as cm2\mathrm{cm^2}cm2.

Figure 1. The area of the parallelogram equals the magnitude of the vector product. Its height is the length of w multiplied by sin θ.

The figure shows why. The base has length ∣v∣|\mathbf{v}|∣v∣ and the height is ∣w∣sin⁡θ|\mathbf{w}|\sin\theta∣w∣sinθ. Area is base multiplied by height, which gives the same formula.

A triangle with the same two sides has half that area, 12∣v×w∣\frac{1}{2}|\mathbf{v}\times\mathbf{w}|21​∣v×w∣. If the vectors are parallel, sin⁡θ=0\sin\theta=0sinθ=0, so the area is zero. Doubling one side doubles the area.

Worked example

Area of a triangle

A triangle has sides v=(123)\mathbf{v}=\begin{pmatrix}1\\2\\3\end{pmatrix}v=​123​​ cm and w=(456)\mathbf{w}=\begin{pmatrix}4\\5\\6\end{pmatrix}w=​456​​ cm. Find its area.
  1. 1
    The vector product is v×w=(−36−3)\mathbf{v}\times\mathbf{w}=\begin{pmatrix}-3\\6\\-3\end{pmatrix}v×w=​−36−3​​.
  2. 2
    Magnitude: 9+36+9=54≈7.35\sqrt{9+36+9}=\sqrt{54}\approx7.359+36+9​=54​≈7.35.
  3. 3
    Triangle area: 12×7.35≈3.67\frac{1}{2}\times7.35\approx3.6721​×7.35≈3.67.

Answer: The area is about 3.67 cm23.67\,\mathrm{cm^2}3.67cm2.

Key term

area

Area measures the size of a two-dimensional region.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State two formulae for the scalar product v⋅w\mathbf{v}\cdot\mathbf{w}v⋅w, one using components and one using the angle θ\thetaθ.

    Show mark schemeHide mark scheme

    Model answer

    v⋅w=v1w1+v2w2+v3w3\mathbf{v}\cdot\mathbf{w}=v_1w_1+v_2w_2+v_3w_3v⋅w=v1​w1​+v2​w2​+v3​w3​ and v⋅w=∣v∣∣w∣cos⁡θ\mathbf{v}\cdot\mathbf{w}=|\mathbf{v}||\mathbf{w}|\cos\thetav⋅w=∣v∣∣w∣cosθ.

    • 1 mark for stating the component formula
    • 1 mark for stating ∣v∣∣w∣cos⁡θ|\mathbf{v}||\mathbf{w}|\cos\theta∣v∣∣w∣cosθ
  2. 2.Calculate[3 marks]

    Calculate the angle between v=(101)\mathbf{v}=\begin{pmatrix}1\\0\\1\end{pmatrix}v=​101​​ and w=(011)\mathbf{w}=\begin{pmatrix}0\\1\\1\end{pmatrix}w=​011​​.

    Show mark schemeHide mark scheme

    Model answer

    v⋅w=1\mathbf{v}\cdot\mathbf{w}=1v⋅w=1 and ∣v∣=∣w∣=2|\mathbf{v}|=|\mathbf{w}|=\sqrt{2}∣v∣=∣w∣=2​. So cos⁡θ=12\cos\theta=\frac{1}{2}cosθ=21​ and θ=60∘\theta=60^{\circ}θ=60∘.

    • 1 mark for finding the scalar product 1
    • 1 mark for finding both magnitudes as 2\sqrt{2}2​ and substituting into cos⁡θ=v⋅w∣v∣∣w∣\cos\theta=\frac{\mathbf{v}\cdot\mathbf{w}}{|\mathbf{v}||\mathbf{w}|}cosθ=∣v∣∣w∣v⋅w​
    • 1 mark for obtaining θ=60∘\theta=60^{\circ}θ=60∘
  3. 3.Determine[3 marks]

    Determine the value of ppp for which (p2−1)\begin{pmatrix}p\\2\\-1\end{pmatrix}​p2−1​​ is perpendicular to (43−2)\begin{pmatrix}4\\3\\-2\end{pmatrix}​43−2​​.

    Show mark schemeHide mark scheme

    Model answer

    The scalar product is zero: 4p+6+2=04p+6+2=04p+6+2=0. So 4p=−84p=-84p=−8 and p=−2p=-2p=−2.

    • 1 mark for setting the scalar product equal to zero
    • 1 mark for writing 4p+6+2=04p+6+2=04p+6+2=0
    • 1 mark for obtaining p=−2p=-2p=−2
  4. 4.Calculate[3 marks]

    Calculate v×w\mathbf{v}\times\mathbf{w}v×w for v=(201)\mathbf{v}=\begin{pmatrix}2\\0\\1\end{pmatrix}v=​201​​ and w=(130)\mathbf{w}=\begin{pmatrix}1\\3\\0\end{pmatrix}w=​130​​.

    Show mark schemeHide mark scheme

    Model answer

    v×w=(0×0−1×31×1−2×02×3−0×1)=(−316)\mathbf{v}\times\mathbf{w}=\begin{pmatrix}0\times0-1\times3\\1\times1-2\times0\\2\times3-0\times1\end{pmatrix}=\begin{pmatrix}-3\\1\\6\end{pmatrix}v×w=​0×0−1×31×1−2×02×3−0×1​​=​−316​​.

    • 1 mark for a correct first component of -3
    • 1 mark for a correct second component of 1
    • 1 mark for a correct third component of 6
  5. 5.Distinguish[2 marks]

    Distinguish between the scalar product and the vector product of two vectors.

    Show mark schemeHide mark scheme

    Model answer

    The scalar product is a number, found by multiplying matching components and adding. The vector product is a vector perpendicular to both original vectors.

    • 1 mark for stating that the scalar product gives a number
    • 1 mark for stating that the vector product gives a vector perpendicular to both
  6. 6.Determine[2 marks]

    Determine the area of a triangle with sides v\mathbf{v}v and w\mathbf{w}w, given that v×w=(068) cm2\mathbf{v}\times\mathbf{w}=\begin{pmatrix}0\\6\\8\end{pmatrix}\,\mathrm{cm^2}v×w=​068​​cm2.

    Show mark schemeHide mark scheme

    Model answer

    ∣v×w∣=36+64=10|\mathbf{v}\times\mathbf{w}|=\sqrt{36+64}=10∣v×w∣=36+64​=10. The triangle area is 12×10=5 cm2\frac{1}{2}\times10=5\,\mathrm{cm^2}21​×10=5cm2.

    • 1 mark for finding the magnitude 10
    • 1 mark for halving to obtain 5 cm25\,\mathrm{cm^2}5cm2

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the result that shows two non-zero vectors v\mathbf{v}v and w\mathbf{w}w are perpendicular.
Show answer and explanation

Answer: D · Worked explanation

Perpendicular vectors have cos⁡90∘=0\cos90^{\circ}=0cos90∘=0, so their scalar product is zero. A zero vector product signals parallel vectors instead, and v⋅w=∣v∣∣w∣\mathbf{v}\cdot\mathbf{w}=|\mathbf{v}||\mathbf{w}|v⋅w=∣v∣∣w∣ means the angle is 0∘0^{\circ}0∘. A scalar product of 1 has no special geometric meaning, since its size depends on the magnitudes.
4.

Medium·Calculate[2 marks]

Calculate the angle between (221)\begin{pmatrix}2\\2\\1\end{pmatrix}​221​​ and (2−12)\begin{pmatrix}2\\-1\\2\end{pmatrix}​2−12​​, to 3 significant figures.
Show answer and explanation

Answer: B · Worked explanation

The scalar product is 4−2+2=44-2+2=44−2+2=4, and both magnitudes are 3. So cos⁡θ=49\cos\theta=\frac{4}{9}cosθ=94​ and θ≈63.6∘\theta\approx63.6^{\circ}θ≈63.6∘. The value 26.4∘26.4^{\circ}26.4∘ is 90∘90^{\circ}90∘ minus the answer, which comes from mixing up cosine and sine. The value 116.4∘116.4^{\circ}116.4∘ would need a negative scalar product, but this one is positive.
5.

Medium·Determine[2 marks]

Determine kkk so that (k31)\begin{pmatrix}k\\3\\1\end{pmatrix}​k31​​ is perpendicular to (2−15)\begin{pmatrix}2\\-1\\5\end{pmatrix}​2−15​​.
Show answer and explanation

Answer: A · Worked explanation

Set the scalar product to zero: 2k−3+5=02k-3+5=02k−3+5=0, so 2k=−22k=-22k=−2 and k=−1k=-1k=−1. The value k=−4k=-4k=−4 comes from using +3+3+3 instead of -3, which ignores the negative component. Substituting k=−1k=-1k=−1 back gives −2−3+5=0-2-3+5=0−2−3+5=0, which confirms the answer. The value k=4k=4k=4 comes from moving the terms across the equals sign with the wrong signs.
6.

Medium·Calculate[2 marks]

Calculate (102)×(010)\begin{pmatrix}1\\0\\2\end{pmatrix}\times\begin{pmatrix}0\\1\\0\end{pmatrix}​102​​×​010​​.
Show answer and explanation

Answer: D · Worked explanation

The components are 0×0−2×1=−20\times0-2\times1=-20×0−2×1=−2, then 2×0−1×0=02\times0-1\times0=02×0−1×0=0, then 1×1−0×0=11\times1-0\times0=11×1−0×0=1. The vector (20−1)\begin{pmatrix}2\\0\\-1\end{pmatrix}​20−1​​ is the product taken in the opposite order, which reverses every sign. Each component cross-multiplies the other two coordinates, so the second component is zero here because both of its terms vanish.
7.

Medium·Determine[2 marks]

Two vectors have vector product (068) cm2\begin{pmatrix}0\\6\\8\end{pmatrix}\,\mathrm{cm^2}​068​​cm2. Determine the area of the triangle with these two sides.
Show answer and explanation

Answer: C · Worked explanation

The magnitude is 0+36+64=10\sqrt{0+36+64}=100+36+64​=10, which is the area of the parallelogram. A triangle has half of that, so 5 cm25\,\mathrm{cm^2}5cm2. The value 10 cm210\,\mathrm{cm^2}10cm2 forgets to halve. The value 14 cm214\,\mathrm{cm^2}14cm2 comes from adding the components, which does not give a size.
8.

Hard·Identify[2 marks]

Identify the correct statement comparing v×w\mathbf{v}\times\mathbf{w}v×w and w×v\mathbf{w}\times\mathbf{v}w×v.
Show answer and explanation

Answer: B · Worked explanation

Swapping the order reverses the direction but not the size, so w×v=−(v×w)\mathbf{w}\times\mathbf{v}=-(\mathbf{v}\times\mathbf{w})w×v=−(v×w). The scalar product is the one that is unchanged by swapping. The vector product is a vector, not a number. A change of sign alone cannot change a magnitude, so the two sizes agree.
9.

Hard·Determine[2 marks]

Two vectors have magnitudes 4 and 5, and their scalar product is -10. Determine the angle between them.
Show answer and explanation

Answer: D · Worked explanation

Use cos⁡θ=−104×5=−0.5\cos\theta=\frac{-10}{4\times5}=-0.5cosθ=4×5−10​=−0.5, so θ=120∘\theta=120^{\circ}θ=120∘. The value 60∘60^{\circ}60∘ comes from ignoring the negative sign, which would put the angle on the wrong side of 90∘90^{\circ}90∘. The value 150∘150^{\circ}150∘ would need cos⁡θ≈−0.87\cos\theta\approx-0.87cosθ≈−0.87, and 30∘30^{\circ}30∘ would need a positive scalar product.
10.

Hard·Identify[2 marks]

Two non-zero vectors have v×w=0\mathbf{v}\times\mathbf{w}=\mathbf{0}v×w=0. Identify the correct conclusion.
Show answer and explanation

Answer: C · Worked explanation

A zero vector product means sin⁡θ=0\sin\theta=0sinθ=0, so the angle is 0∘0^{\circ}0∘ or 180∘180^{\circ}180∘. For such vectors the scalar product is ±∣v∣∣w∣\pm|\mathbf{v}||\mathbf{w}|±∣v∣∣w∣, which is not zero, so a zero scalar product would point to perpendicular vectors instead.

Keep going

Next topic3.14 Graph theoryPrevious topic3.12 Vectors in kinematics

More in Topic 3 · Geometry and trigonometry

  1. 3.8Unit circle and identitiesNotes · 10 questions· HL only
  2. 3.9Matrix transformationsNotes · 10 questions· HL only
  3. 3.10Vector conceptsNotes · 10 questions· HL only
  4. 3.11Vector equation of a lineNotes · 10 questions· HL only
  5. 3.12Vectors in kinematicsNotes · 10 questions· HL only
  6. 3.13Scalar and vector productsNotes · 10 questions· HL only
  7. 3.14Graph theoryNotes · 10 questions· HL only
  8. 3.15Adjacency matricesNotes · 10 questions· HL only
  9. 3.16Tree and cycle algorithmsNotes · 10 questions· HL only

All IB Mathematics: Applications and Interpretation topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1The scalar product multiplies vectors to give a number
  2. 2The scalar product connects to the angle between vectors
  3. 3A zero scalar product means the vectors are perpendicular
  4. 4The vector product gives a vector perpendicular to both
  5. 5The magnitude of the vector product gives an area
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe