IB Mathematics: Applications and Interpretation · Topic 4 · Statistics and probability
4.9 Normal distribution
Recognise the features of a normal distribution curve, find normal probabilities and inverse normal values with technology, and interpret the results in context.
1/6Many measurements cluster symmetrically around a typical value
- Many measurements cluster symmetrically around a typical value
- The normal curve is a symmetric bell with total area one
- Technology finds probabilities as areas under the curve
- Inverse normal finds the value that cuts off a given area
- Standardising compares values from different distributions
- Normal results must be read in context and checked
- Check your recall
- Practice: 10 questions
Part 1 of 6: Many measurements cluster symmetrically around a typical value
Measure the heights of 1000 adults. Most heights lie close to the average, and very tall or very short people are rare. A normal distribution models measurements that behave like this.
It is fixed by two numbers. The mean marks the centre, and the standard deviation sets the spread. We write , where is the measurement.
A normal variable is continuous, so can take any value in an interval. Heights, masses and times are typical examples.
Key terms · tap one for its definition
normal distribution
A normal distribution is a symmetric, bell-shaped continuous distribution, written , defined by its mean and standard deviation .
standard deviation
The standard deviation of a distribution is the square root of its variance, measuring spread in the same units as the data.
Part 2 of 6: The normal curve is a symmetric bell with total area one
Now look at the shape of the curve itself. Its height at each value shows how common that value is. A graph of heights with and looks like this.
- The curve is symmetric about the mean .
- The mean, median and mode are all equal.
- The curve is highest at the mean and falls away on both sides.
- The total area under the curve is 1.
Area under the curve between two values is a probability. About 68% of values lie within one standard deviation of the mean. About 95% lie within two, and about 99.7% lie within three.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 3 of 6: Technology finds probabilities as areas under the curve
To find an area, use the normal cumulative distribution function on a calculator. Enter the lower bound, the upper bound, the mean and the standard deviation. For an unbounded side, use a very large number such as or .
Worked example
Tall adults
- Sketch the curve and shade the area to the right of 180.
- Enter lower bound 180, upper bound , mean 170, standard deviation 7.
- Read the result from the calculator.
Answer: .
The calculator returns the area between the bounds, and that area is the probability. For a probability below a value, use a very small lower bound such as .
Part 4 of 6: Inverse normal finds the value that cuts off a given area
Sometimes the probability is known and the value is missing. An inverse normal calculation takes the area to the left and returns the value . Enter the area, the mean and the standard deviation.
Worked example
The height of the tallest 10%
- Write the condition: .
- The area to the left is 0.9, so enter 0.9 with mean 170 and standard deviation 7.
- Read the result: .
Answer: .
The same idea works for a lower tail. A question about the shortest 10% asks for with . Here lies below the mean, because the area to its left is under 0.5.
Key term
inverse normal
An inverse normal calculation finds the value for which the area to its left under a normal curve is a given probability.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 5 of 6: Standardising compares values from different distributions
A score of 74 on one test and 63 on another cannot be compared directly. Each should be measured against its own mean and spread. The z-score does this, using .
A positive means the value is above the mean. A negative means it is below. The standard normal variable has , so values can be used on any normal distribution.
Standardising also links every normal distribution to the standard normal one. The area to the left of equals the area to the left of on the standard curve.
Worked example
Comparing two scores
- Test A: .
- Test B: .
- Compare: 1.6 is greater than 1.5.
Answer: The score of 63 on test B is relatively better, as it lies 1.6 standard deviations above its mean.
Key term
z-score
A z-score is the number of standard deviations a value lies above or below the mean, given by .
Part 6 of 6: Normal results must be read in context and checked
A probability becomes useful once it is tied to a situation. Since , about 7.7% of adults are taller than 180 cm. In a group of 500 adults, we expect about such people.
Check that the answer is sensible. A probability must lie between 0 and 1. A value above the mean should give a tail area below 0.5 on the right.
The model is an approximation. Real heights are never exactly normal, so state results as approximate and give the units.
Check your recall[14 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Describe[3 marks]
Describe three features of the normal distribution curve.
Show mark schemeHide mark scheme
Model answer
The curve is bell-shaped and symmetric about the mean. The mean, median and mode are equal. The total area under the curve is 1.
- 1 mark for stating that the curve is bell-shaped or symmetric about the mean
- 1 mark for stating that the mean, median and mode are equal
- 1 mark for stating that the total area under the curve is 1
- 2.State[1 mark]
State the total area under any normal distribution curve.
Show mark schemeHide mark scheme
Model answer
The total area is 1.
- 1 mark for stating that the area is 1
- 3.Calculate[2 marks]
Loaf masses follow , in g. Calculate the -score of a loaf with mass 824 g.
Show mark schemeHide mark scheme
Model answer
.
- 1 mark for substituting into
- 1 mark for obtaining
- 4.Calculate[3 marks]
Using , calculate the probability that a loaf has mass less than 785 g.
Show mark schemeHide mark scheme
Model answer
Use the normal cumulative distribution function with lower bound , upper bound 785, mean 800 and standard deviation 12. .
- 1 mark for identifying the required area as to the left
- 1 mark for using mean 800 and standard deviation 12 in technology
- 1 mark for obtaining 0.106
- 5.Determine[3 marks]
Using , determine the mass such that .
Show mark schemeHide mark scheme
Model answer
Use an inverse normal calculation with area 0.95, mean 800 and standard deviation 12. The result is .
- 1 mark for using the area to the left as 0.95
- 1 mark for using mean 800 and standard deviation 12
- 1 mark for obtaining 820 g
- 6.Explain[2 marks]
Explain why and are equal for a normal distribution.
Show mark schemeHide mark scheme
Model answer
The normal distribution is continuous, so the area at a single value is zero. Including the value therefore adds no probability.
- 1 mark for stating that the distribution is continuous or that a single value has zero probability
- 1 mark for concluding that including the endpoint adds nothing

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyState[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumCalculate[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumCalculate[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumDetermine[2 marks]
Show answer and explanation
Answer: A · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: A · Worked explanation
HardDetermine[2 marks]
Show answer and explanation
Answer: A · Worked explanation
HardCalculate[2 marks]
Show answer and explanation
Answer: A · Worked explanation
HardDetermine[2 marks]
Show answer and explanation
Answer: A · Worked explanation