Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Physics
  3. ›C Wave behaviour
  4. ›C.4 Standing waves and resonance

IB Physics · Theme C · Wave behaviour

C.4 Standing waves and resonance

Describe standing waves, identify nodes and antinodes, and calculate resonant frequencies for strings and pipes.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Opposing waves can form a stationary pattern
  1. 1Opposing waves can form a stationary pattern
  2. 2Fixed string ends determine the allowed wavelengths
  3. 3Pipe ends determine which air patterns fit
  4. 4Resonance makes matching frequencies produce larger oscillations
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Opposing waves can form a stationary pattern

A standing wave forms when waves of the same frequency travel in opposite directions and interfere. On a string, an incoming wave overlaps with its reflection. In an air column, sound travels along the column and reflects at its ends. The pattern stays in place, although the medium continues to oscillate.

A node has zero oscillation because the waves always cancel there. An antinode has maximum oscillation because the waves reinforce there. Neighbouring nodes are separated by half a wavelength. A node and its nearest antinode are separated by a quarter wavelength. These distances help identify the wavelength from a standing-wave pattern.

Figure 1. The ends and centre remain still. The two antinodes move with maximum amplitude.

Key terms · tap one for its definition

standing wave

A standing wave is a stationary interference pattern formed by waves of the same frequency travelling in opposite directions.

node

A node is a position in a standing wave where the medium has zero oscillation.

antinode

An antinode is a position in a standing wave where the medium oscillates with maximum amplitude.

Part 1 done

2

Part 2 of 4: Fixed string ends determine the allowed wavelengths

Both fixed ends of a string must be displacement nodes. Only patterns with a whole number of half-wavelengths between the ends can persist. For string length LLL, the allowed wavelengths satisfy L=nλn2L=\frac{n\lambda_n}{2}L=2nλn​​, where n=1,2,3,…n=1,2,3,\ldotsn=1,2,3,….

The lowest allowed frequency is the fundamental frequency. For wave speed vvv, it is f1=v2Lf_1=\frac{v}{2L}f1​=2Lv​. The higher harmonics have frequencies fn=nv2L=nf1f_n=\frac{nv}{2L}=nf_1fn​=2Lnv​=nf1​. Increasing string tension increases wave speed and therefore raises these frequencies. Changing the length also changes which wavelengths fit. These expressions treat the string as uniform, with fixed ends.

Exam tip

Count half-wavelengths between the fixed ends before choosing nnn.

Key terms · tap one for its definition

fundamental frequency

The fundamental frequency is the lowest allowed frequency of a standing-wave system.

harmonics

Harmonics are allowed frequencies that are whole-number multiples of the fundamental frequency.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the description of a standing wave on a stretched string.
Show answer and explanation

Answer: C · Worked explanation

A standing wave is a stationary interference pattern formed by waves of the same frequency travelling in opposite directions. On a string, an incoming wave and its reflection can form this pattern. A reflected wave does not stop oscillating; the string continues to move even though the pattern stays in place.
3

Part 3 of 4: Pipe ends determine which air patterns fit

In an air column, displacement describes how far air particles move. A closed end is a displacement node. An open end is approximately a displacement antinode. The corresponding pressure pattern is reversed: pressure variation is greatest at a closed end. These end conditions determine the allowed patterns.

Ideal pipe patterns

PipeFundamental patternResonant frequencies
Open at both endsL=λ12L=\frac{\lambda_1}{2}L=2λ1​​fn=nv2Lf_n=\frac{nv}{2L}fn​=2Lnv​; n=1,2,3,…n=1,2,3,\ldotsn=1,2,3,…
Closed at one endL=λ14L=\frac{\lambda_1}{4}L=4λ1​​f=nv4Lf=\frac{nv}{4L}f=4Lnv​; n=1,3,5,…n=1,3,5,\ldotsn=1,3,5,…
Pipe
Open at both ends
Fundamental pattern
L=λ12L=\frac{\lambda_1}{2}L=2λ1​​
Resonant frequencies
fn=nv2Lf_n=\frac{nv}{2L}fn​=2Lnv​; n=1,2,3,…n=1,2,3,\ldotsn=1,2,3,…
Pipe
Closed at one end
Fundamental pattern
L=λ14L=\frac{\lambda_1}{4}L=4λ1​​
Resonant frequencies
f=nv4Lf=\frac{nv}{4L}f=4Lnv​; n=1,3,5,…n=1,3,5,\ldotsn=1,3,5,…

An ideal pipe closed at one end has only odd-numbered harmonics. A real open end has an end correction, because the antinode lies slightly beyond the opening. The ideal formulae ignore this small shift.

Common mistake

An open pipe end is not a displacement node. It is approximately a displacement antinode.

Key terms · tap one for its definition

displacement

Displacement is the distance and direction of a particle from its equilibrium position.

end correction

End correction accounts for the displacement antinode lying slightly beyond a pipe's open end.

Part 3 done

4

Part 4 of 4: Resonance makes matching frequencies produce larger oscillations

Resonance occurs when a periodic driving force matches an allowed natural frequency. Energy is transferred effectively, so the oscillation amplitude grows. Energy losses limit the amplitude in real systems. A string can resonate in several standing-wave patterns. An air column can also resonate, with its available frequencies set by its end conditions.

Worked example

Finding pipe resonances

A pipe is 0.85 m long and closed at one end. The speed of sound is 340 m/s. Find its first two resonant frequencies using the ideal pipe model.
  1. 1
    For a pipe closed at one end, use f=nv4Lf=\frac{nv}{4L}f=4Lnv​ with n=1,3,5,…n=1,3,5,\ldotsn=1,3,5,….
  2. 2
    First resonance: f1=3404(0.85)=100 Hzf_1=\frac{340}{4(0.85)}=100\,\mathrm{Hz}f1​=4(0.85)340​=100Hz.
  3. 3
    Second resonance: f3=3(340)4(0.85)=300 Hzf_3=\frac{3(340)}{4(0.85)}=300\,\mathrm{Hz}f3​=4(0.85)3(340)​=300Hz.

Answer: The first two resonant frequencies are 100 Hz and 300 Hz.

Exam tip

For a pipe closed at one end, the second resonance is the third harmonic.

Key term

resonance

Resonance is the large response produced when a driving frequency matches an allowed natural frequency.

Note read

Check your recall[15 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain how a standing wave forms and distinguish a node from an antinode.

    Show mark schemeHide mark scheme

    Model answer

    Waves of the same frequency travel in opposite directions and interfere. At a node, they always cancel, giving zero oscillation. At an antinode, they reinforce, giving maximum oscillation.

    • 1 mark for describing interference between same-frequency waves travelling in opposite directions
    • 1 mark for identifying a node as a position of zero oscillation
    • 1 mark for identifying an antinode as a position of maximum oscillation
  2. 2.Describe[3 marks]

    Describe the displacement conditions at both ends of an open pipe and a pipe closed at one end.

    Show mark schemeHide mark scheme

    Model answer

    An open end is approximately a displacement antinode. A closed end is a displacement node. An open pipe has antinodes at both ends, while a pipe closed at one end has one node and one antinode.

    • 1 mark for stating that an open end is approximately a displacement antinode
    • 1 mark for stating that a closed end is a displacement node
    • 1 mark for applying both conditions correctly to the two pipe types
  3. 3.Calculate[3 marks]

    A string fixed at both ends is 0.80 m long. Waves travel along it at 160 m/s. Calculate its fundamental and third-harmonic frequencies.

    Show mark schemeHide mark scheme

    Model answer

    The fundamental frequency is f1=v2L=1602(0.80)=100 Hzf_1=\frac{v}{2L}=\frac{160}{2(0.80)}=100\,\mathrm{Hz}f1​=2Lv​=2(0.80)160​=100Hz. The third-harmonic frequency is f3=3f1=300 Hzf_3=3f_1=300\,\mathrm{Hz}f3​=3f1​=300Hz.

    • 1 mark for using f1=v2Lf_1=\frac{v}{2L}f1​=2Lv​
    • 1 mark for calculating the fundamental frequency as 100 Hz
    • 1 mark for calculating the third-harmonic frequency as 300 Hz
  4. 4.Calculate[3 marks]

    A 0.85 m pipe is closed at one end. Sound travels at 340 m/s. Calculate its second resonant frequency.

    Show mark schemeHide mark scheme

    Model answer

    Only odd-numbered harmonics occur, so the second resonance has n=3n=3n=3. Thus f=3v4L=3(340)4(0.85)=300 Hzf=\frac{3v}{4L}=\frac{3(340)}{4(0.85)}=300\,\mathrm{Hz}f=4L3v​=4(0.85)3(340)​=300Hz.

    • 1 mark for identifying the second resonance as the third harmonic
    • 1 mark for using f=3v4Lf=\frac{3v}{4L}f=4L3v​
    • 1 mark for calculating 300 Hz
  5. 5.Explain[3 marks]

    Explain why a driven air column resonates and why its amplitude does not grow without limit.

    Show mark schemeHide mark scheme

    Model answer

    Resonance occurs when the driving frequency matches an allowed natural frequency. Energy transfer then increases the oscillation amplitude. Energy losses limit the amplitude.

    • 1 mark for matching the driving frequency to an allowed natural frequency
    • 1 mark for linking effective energy transfer to increased amplitude
    • 1 mark for stating that energy losses limit the amplitude

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify the point in a standing wave where the medium has maximum oscillation amplitude.
Show answer and explanation

Answer: A · Worked explanation

An antinode is the position where the medium oscillates with maximum amplitude. A node, by contrast, has zero oscillation. The midpoint between neighbouring antinodes is a node, not a point of maximum oscillation.
3.

Easy·State[1 mark]

State what happens when a periodic driving force matches an allowed natural frequency of a system.
Show answer and explanation

Answer: A · Worked explanation

When the driving frequency matches an allowed natural frequency, resonance occurs and energy is transferred effectively to the system, increasing its oscillation amplitude. In a real system, energy losses limit that amplitude. Matching frequencies therefore does not stop the oscillation or prevent energy transfer.
4.

Easy·Identify[1 mark]

Identify the set of harmonic numbers allowed for an ideal pipe closed at one end.
Show answer and explanation

Answer: D · Worked explanation

An ideal pipe closed at one end supports odd-numbered harmonics only: n=1,3,5,…n=1,3,5,\ldotsn=1,3,5,…. Its displacement node at the closed end and antinode at the open end restrict which patterns fit. Allowing every positive integer would incorrectly assign it the same harmonic pattern as a pipe open at both ends.
5.

Medium·Determine[2 marks]

A string supports a standing-wave pattern with adjacent nodes 0.30 m apart. Determine the wavelength of the waves on the string.
Show answer and explanation

Answer: B · Worked explanation

Adjacent nodes are separated by half a wavelength, so λ/2=0.30 m\lambda/2=0.30\,\text{m}λ/2=0.30m. Therefore λ=2(0.30)=0.60 m\lambda=2(0.30)=0.60\,\text{m}λ=2(0.30)=0.60m. The tempting value 0.30 m0.30\,\text{m}0.30m mistakes the node spacing for a full wavelength rather than half a wavelength.
6.

Medium·Deduce[2 marks]

A string is fixed at both ends and vibrates in a pattern with three antinodes. Deduce the number of half-wavelengths that fit along the string.
Show answer and explanation

Answer: B · Worked explanation

For a string fixed at both ends, each antinode corresponds to one half-wavelength fitting between consecutive nodes, including the fixed ends. Three antinodes therefore mean three half-wavelengths fit along the string. Six would count the nodes and antinodes together rather than counting the wavelength sections.
7.

Medium·Calculate[2 marks]

A string fixed at both ends has length 0.75 m0.75\,\text{m}0.75m, and waves travel along it at 180 m s−1180\,\text{m s}^{-1}180m s−1. Calculate its fundamental frequency.
Show answer and explanation

Answer: B · Worked explanation

For a string fixed at both ends, the fundamental frequency is f1=v/(2L)f_1=v/(2L)f1​=v/(2L). Substituting the values gives f1=180/[2(0.75)]=120 Hzf_1=180/[2(0.75)]=120\,\text{Hz}f1​=180/[2(0.75)]=120Hz. The value 240 Hz240\,\text{Hz}240Hz results from using v/Lv/Lv/L, which corresponds to twice the fundamental frequency.
8.

Medium·Calculate[2 marks]

An ideal pipe is open at both ends, has length 0.50 m0.50\,\text{m}0.50m, and contains sound travelling at 300 m s−1300\,\text{m s}^{-1}300m s−1. Calculate its second harmonic frequency.
Show answer and explanation

Answer: B · Worked explanation

For a pipe open at both ends, fn=nv/(2L)f_n=nv/(2L)fn​=nv/(2L). For the second harmonic, n=2n=2n=2, so f2=2(300)/[2(0.50)]=600 Hzf_2=2(300)/[2(0.50)]=600\,\text{Hz}f2​=2(300)/[2(0.50)]=600Hz. The value 300 Hz300\,\text{Hz}300Hz is the fundamental frequency; the second harmonic is twice that frequency.
9.

Medium·Explain[2 marks]

A speaker drives an air column at one of its allowed resonant frequencies. Explain why the air-column amplitude grows at first but does not increase without limit.
Show answer and explanation

Answer: C · Worked explanation

At resonance, the driving frequency matches an allowed natural frequency, so energy is transferred effectively and the oscillation amplitude grows. In a real air column, energy losses balance the energy supplied and prevent unlimited growth. The air particles do not stop moving; they continue to oscillate in the standing-wave pattern.
10.

Hard·Determine[2 marks]

A string of fixed length is first driven at its fundamental frequency and then at a frequency three times as large. Determine how the standing-wave pattern changes, assuming the wave speed stays constant.
Show answer and explanation

Answer: D · Worked explanation

For a fixed string with constant wave speed and length, the harmonic frequencies satisfy fn=nf1f_n=nf_1fn​=nf1​. A frequency three times the fundamental is therefore the third harmonic, with three half-wavelengths fitting along the string rather than one. Three full wavelengths would require six half-wavelength sections between the fixed ends.

Keep going

Next topicC.5 Doppler effectPrevious topicC.3 Wave phenomena

More in Theme C · Wave behaviour

  1. C.1Simple harmonic motionNotes · 10 questions
  2. C.2Wave modelNotes · 10 questions
  3. C.3Wave phenomenaNotes · 10 questions
  4. C.4Standing waves and resonanceNotes · 10 questions
  5. C.5Doppler effectNotes · 10 questions

All IB Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/4 read

  1. 1Opposing waves can form a stationary pattern
  2. 2Fixed string ends determine the allowed wavelengths
  3. 3Pipe ends determine which air patterns fit
  4. 4Resonance makes matching frequencies produce larger oscillations
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe