Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›OCR A-level Biology A
  3. ›2 Module 2: Foundations in biology
  4. ›2.1.2 Biological molecules

OCR A-level Biology A · Section 2 · Module 2: Foundations in biology

2.1.2 Biological molecules

Describe the structure and roles of carbohydrates, lipids, proteins, water and inorganic ions, and use biochemical tests to identify the main biological molecules.

  • 7 min read
  • 7 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/7Sugars join by condensation reactions to form larger carbohydrates
  1. 1Sugars join by condensation reactions to form larger carbohydrates
  2. 2Polysaccharides are long chains that store energy or give strength
  3. 3Lipids are insoluble molecules that store energy and form membranes
  4. 4Proteins are chains of amino acids folded into precise shapes
  5. 5Biochemical tests identify sugars, starch, proteins and lipids
  6. 6Hydrogen bonding gives water its useful properties
  7. 7Inorganic ions have specific jobs in living organisms
  8. Check your recall
  9. Practice: 10 questions
1

Part 1 of 7: Sugars join by condensation reactions to form larger carbohydrates

Table sugar and the glucose in blood are both carbohydrates. A monosaccharide is a single sugar unit. Glucose is a six-carbon monosaccharide with two forms, α-glucose and β-glucose. They differ in the position of one –OH group on carbon 1.

Two monosaccharides can join in a condensation reaction, which releases a molecule of water. The new covalent bond between the sugars is a glycosidic bond. The product is a disaccharide.

Figure 1. Two monosaccharides join through a glycosidic bond, and a molecule of water is released.

Maltose is two α-glucose units. Sucrose is glucose joined to fructose, and lactose is glucose joined to galactose. Adding water splits a glycosidic bond again, in a reaction called hydrolysis.

Key terms · tap one for its definition

monosaccharide

A monosaccharide is a carbohydrate consisting of one sugar unit.

condensation reaction

A condensation reaction is a reaction in which two molecules join by a covalent bond and a molecule of water is released.

disaccharide

A disaccharide consists of two monosaccharides joined by a glycosidic bond.

Part 1 done

2

Part 2 of 7: Polysaccharides are long chains that store energy or give strength

A chain of many similar units is a polymer, and each unit is a monomer. Many monosaccharides joined in a chain make a polysaccharide. Cells use these long molecules in two main ways.

The main energy store in plants is starch. It is a mixture of amylose, a coiled unbranched chain, and amylopectin, which is branched. Starch is insoluble, so it stores glucose without affecting the cell’s water balance.

Animals store glucose as glycogen. Glycogen is more highly branched than starch, so enzymes can release glucose quickly from many ends at once.

The polysaccharide cellulose is made from β-glucose. Alternate units are turned over, which gives straight chains. Hydrogen bonds between neighbouring chains form strong fibres in plant cell walls.

Three polysaccharides compared

FeatureStarchGlycogenCellulose
Monomerα-glucoseα-glucoseβ-glucose
Chain shapeCoiled and branchedHighly branchedStraight and unbranched
Found inPlant cellsAnimal cellsPlant cell walls
RoleEnergy storeEnergy storeStrength
Feature
Monomer
Starch
α-glucose
Glycogen
α-glucose
Cellulose
β-glucose
Feature
Chain shape
Starch
Coiled and branched
Glycogen
Highly branched
Cellulose
Straight and unbranched
Feature
Found in
Starch
Plant cells
Glycogen
Animal cells
Cellulose
Plant cell walls
Feature
Role
Starch
Energy store
Glycogen
Energy store
Cellulose
Strength

Key terms · tap one for its definition

polysaccharide

A polysaccharide is a carbohydrate containing many monosaccharides joined by glycosidic bonds.

starch

Starch is a plant glucose store made from alpha-glucose units.

cellulose

Cellulose is a polysaccharide of β-glucose units whose straight chains bond together to form strong fibres.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the bond that joins two monosaccharides in a disaccharide.
Show answer and explanation

Answer: C · Worked explanation

A glycosidic bond forms between two monosaccharides in a condensation reaction. A peptide bond joins amino acids, and an ester bond joins a fatty acid to glycerol. Hydrogen bonds are weak attractions between molecules, not the bond that joins sugars.
3

Part 3 of 7: Lipids are insoluble molecules that store energy and form membranes

Fats, oils and the molecules in cell membranes are all lipids. A lipid dissolves poorly in water because it contains long hydrocarbon chains.

A triglyceride is made of one glycerol and three fatty acids. Each fatty acid joins by an ester bond, formed in a condensation reaction. Fatty acids with no C=C double bonds are saturated. Those with at least one double bond are unsaturated. Double bonds put kinks in the chain, so unsaturated fats are usually liquid at room temperature.

A phospholipid replaces one fatty acid with a phosphate group. The phosphate head is hydrophilic, meaning water-attracting. The fatty acid tails are hydrophobic, meaning water-repelling.

Triglycerides and phospholipids compared

FeatureTriglyceridePhospholipid
PartsGlycerol and three fatty acidsGlycerol, two fatty acids and a phosphate group
Behaviour in waterEntirely hydrophobicHydrophilic head, hydrophobic tails
Main roleEnergy storeForms the bilayer of cell membranes
Feature
Parts
Triglyceride
Glycerol and three fatty acids
Phospholipid
Glycerol, two fatty acids and a phosphate group
Feature
Behaviour in water
Triglyceride
Entirely hydrophobic
Phospholipid
Hydrophilic head, hydrophobic tails
Feature
Main role
Triglyceride
Energy store
Phospholipid
Forms the bilayer of cell membranes

Common mistake

A lipid is not a polymer. It is not a long chain of repeating identical units.

Key terms · tap one for its definition

lipid

A lipid belongs to a varied group of molecules that are largely insoluble in water.

triglyceride

A triglyceride is a lipid formed from one glycerol molecule and three fatty acids joined by ester bonds.

phospholipid

A phospholipid is a lipid with glycerol, two fatty acids and a phosphate group, giving a hydrophilic head and hydrophobic tails.

Part 3 done

4

Part 4 of 7: Proteins are chains of amino acids folded into precise shapes

Muscles, enzymes and haemoglobin are all made of protein. An amino acid has an amine group, a carboxyl group and a variable R group. Twenty different R groups give twenty different amino acids.

Two amino acids join in a condensation reaction, forming a peptide bond and releasing water. A chain of many amino acids is a polypeptide.

Four levels of protein structure

LevelDescriptionMain bonds
PrimaryThe order of amino acids in the chainPeptide bonds
SecondaryCoiling into an α-helix or folding into a β-pleated sheetHydrogen bonds
TertiaryFurther folding into a three-dimensional shapeHydrogen, ionic and disulfide bonds; hydrophobic interactions
QuaternaryTwo or more polypeptides held togetherThe same types as tertiary, between chains
Level
Primary
Description
The order of amino acids in the chain
Main bonds
Peptide bonds
Level
Secondary
Description
Coiling into an α-helix or folding into a β-pleated sheet
Main bonds
Hydrogen bonds
Level
Tertiary
Description
Further folding into a three-dimensional shape
Main bonds
Hydrogen, ionic and disulfide bonds; hydrophobic interactions
Level
Quaternary
Description
Two or more polypeptides held together
Main bonds
The same types as tertiary, between chains

Globular proteins such as haemoglobin are compact and soluble. Fibrous proteins such as collagen form long, strong strands.

Exam tip

Describe each level by what it is and by its bonds. Not every bond in a protein is a peptide bond.

Key terms · tap one for its definition

amino acid

An amino acid is a monomer of proteins, with an amine group, a carboxyl group and a variable R group.

peptide bond

A peptide bond is the covalent bond formed between two amino acids in a condensation reaction.

polypeptide

A polypeptide is a chain of many amino acids joined by peptide bonds.

Part 4 done

Quick check

One question on the part you just read

Easy

State the result of the iodine test on a sample that contains starch.
Show answer and explanation

Answer: B · Worked explanation

Iodine in potassium iodide solution turns blue-black when starch is present. Blue to brick-red is the positive result for Benedict’s reagent with a reducing sugar. Blue to purple is the biuret result for protein. Clear to cloudy white is the ethanol emulsion test for lipids.
5

Part 5 of 7: Biochemical tests identify sugars, starch, proteins and lipids

Chemical tests show which molecules a sample contains. A reducing sugar is a sugar that can donate electrons to another substance. All monosaccharides and some disaccharides, such as maltose, are reducing sugars. Heating them with Benedict’s reagent changes the colour from blue to green, yellow, orange or brick-red.

A non-reducing sugar, such as sucrose, gives no change at first. Boil it with dilute hydrochloric acid to break the glycosidic bond. Neutralise the acid, then repeat the Benedict’s test.

Tests for biological molecules

MoleculeReagentPositive result
Reducing sugarBenedict’s reagent, heatedBlue to brick-red precipitate
Non-reducing sugarAcid, then neutralise, then Benedict’sBlue to brick-red precipitate
StarchIodine in potassium iodide solutionOrange-brown to blue-black
ProteinBiuret reagentBlue to purple
LipidEthanol, then waterCloudy white emulsion
Molecule
Reducing sugar
Reagent
Benedict’s reagent, heated
Positive result
Blue to brick-red precipitate
Molecule
Non-reducing sugar
Reagent
Acid, then neutralise, then Benedict’s
Positive result
Blue to brick-red precipitate
Molecule
Starch
Reagent
Iodine in potassium iodide solution
Positive result
Orange-brown to blue-black
Molecule
Protein
Reagent
Biuret reagent
Positive result
Blue to purple
Molecule
Lipid
Reagent
Ethanol, then water
Positive result
Cloudy white emulsion

Exam tip

Give the start and end colour, such as blue to brick-red. A negative result stays blue.

Key terms · tap one for its definition

reducing sugar

A reducing sugar is a sugar that donates electrons, so it reduces copper(II) ions in Benedict’s reagent.

non-reducing sugar

A non-reducing sugar is a sugar that cannot donate electrons until its glycosidic bond has been broken by hydrolysis.

Part 5 done

6

Part 6 of 7: Hydrogen bonding gives water its useful properties

Every reaction in a cell happens in water, so its properties matter. A water molecule is a polar molecule, with a slightly negative oxygen and slightly positive hydrogen atoms. Opposite charges on neighbouring molecules attract, forming a hydrogen bond.

  • Solvent: charged ions and polar molecules dissolve and are carried in solution.
  • High specific heat capacity: much energy is needed to warm water, so temperatures change slowly.
  • High latent heat of vaporisation: evaporating sweat takes a lot of heat from the body.
  • Cohesion: hydrogen bonds hold molecules together, so columns of water can be pulled up stems.

Key terms · tap one for its definition

polar molecule

A polar molecule is a molecule with an uneven distribution of charge, giving slightly positive and slightly negative regions.

hydrogen bond

A hydrogen bond is a weak attraction between a slightly positive hydrogen atom and a slightly negative atom on another molecule.

Part 6 done

7

Part 7 of 7: Inorganic ions have specific jobs in living organisms

Water carries ions, but ions also do jobs of their own. An inorganic ion is a charged atom or small group of atoms, not built on a carbon chain. It is found dissolved in cells and body fluids. Its charge lets it interact with water and with proteins.

Roles of four inorganic ions

IonRole
Hydrogen ions, H+\mathrm{H^+}H+Their concentration sets the pH
Iron(II) ions, Fe2+\mathrm{Fe^{2+}}Fe2+Part of haemoglobin, where they bind oxygen
Sodium ions, Na+\mathrm{Na^+}Na+Help glucose and amino acids cross membranes
Phosphate ions, PO43−\mathrm{PO_4^{3-}}PO43−​Part of nucleotides, ATP and phospholipids
Ion
Hydrogen ions, H+\mathrm{H^+}H+
Role
Their concentration sets the pH
Ion
Iron(II) ions, Fe2+\mathrm{Fe^{2+}}Fe2+
Role
Part of haemoglobin, where they bind oxygen
Ion
Sodium ions, Na+\mathrm{Na^+}Na+
Role
Help glucose and amino acids cross membranes
Ion
Phosphate ions, PO43−\mathrm{PO_4^{3-}}PO43−​
Role
Part of nucleotides, ATP and phospholipids

Hydrogen ions are produced in cells all the time. Cells keep their concentration steady, because a change in pH can alter the shape of an enzyme. Phosphate ions also join to other molecules to store and release energy in ATP, the cell’s energy-supplying molecule.

Key term

inorganic ion

An inorganic ion is a charged atom or small group of atoms, not built on a carbon chain, found in cells and body fluids.

Note read

Check your recall[15 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe how the structure of cellulose makes it suitable for strengthening plant cell walls.

    Show mark schemeHide mark scheme

    Model answer

    Cellulose is made of β-glucose units, with alternate units turned over, so its chains are straight. Hydrogen bonds form between neighbouring chains. These bonds make strong fibres that resist stretching.

    • 1 mark for stating that cellulose chains are straight and unbranched, with alternate β-glucose units turned over
    • 1 mark for stating that hydrogen bonds form between neighbouring chains
    • 1 mark for linking the strong fibres formed to strength in the cell wall
  2. 2.State[2 marks]

    State the bond that forms when two amino acids join, and the small molecule that is released.

    Show mark schemeHide mark scheme

    Model answer

    A peptide bond forms, and a molecule of water is released.

    • 1 mark for stating that a peptide bond forms
    • 1 mark for stating that water is released
  3. 3.Describe[4 marks]

    A solution gives a negative result with Benedict’s reagent. Describe how to test whether it contains a non-reducing sugar.

    Show mark schemeHide mark scheme

    Model answer

    Boil a sample with dilute hydrochloric acid to hydrolyse the glycosidic bond. Neutralise the acid, then heat with Benedict’s reagent. A brick-red precipitate shows that a non-reducing sugar was present.

    • 1 mark for boiling the sample with dilute hydrochloric acid
    • 1 mark for neutralising the acid
    • 1 mark for heating with Benedict’s reagent
    • 1 mark for stating that a blue to brick-red precipitate shows a non-reducing sugar
  4. 4.Explain[3 marks]

    Explain why water is a good solvent for ions.

    Show mark schemeHide mark scheme

    Model answer

    Water is a polar molecule with slightly negative and slightly positive regions. These regions are attracted to oppositely charged ions. Water molecules surround the ions, so they dissolve.

    • 1 mark for stating that water molecules are polar
    • 1 mark for stating that the slightly charged regions are attracted to ions of opposite charge
    • 1 mark for stating that water molecules surround the ions so they dissolve
  5. 5.Compare[3 marks]

    Compare the structure of a triglyceride with the structure of a phospholipid.

    Show mark schemeHide mark scheme

    Model answer

    A triglyceride has glycerol and three fatty acids, whereas a phospholipid has glycerol, two fatty acids and a phosphate group. A triglyceride is entirely hydrophobic, whereas a phospholipid has a hydrophilic head and hydrophobic tails.

    • 1 mark for stating that a triglyceride has three fatty acids
    • 1 mark for stating that a phospholipid has two fatty acids and a phosphate group
    • 1 mark for stating that a phospholipid has a hydrophilic head and hydrophobic tails, whereas a triglyceride is entirely hydrophobic

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the monomer from which a polypeptide is built.
Show answer and explanation

Answer: B · Worked explanation

A polypeptide is a chain of amino acids joined by peptide bonds. Monosaccharides are the units of polysaccharides. Fatty acids and glycerol combine to make triglycerides, but triglycerides are not polymers. Glycerol is a part of triglycerides and phospholipids, not a unit of proteins.
4.

Medium·Identify[1 mark]

Identify the molecule that is made of one glycerol joined to three fatty acids by ester bonds.
Show answer and explanation

Answer: D · Worked explanation

A triglyceride has one glycerol and three fatty acids. A phospholipid has a phosphate group in place of one fatty acid, so it has only two fatty acids. A polypeptide and a disaccharide contain no glycerol. Together these facts show that only the triglyceride has three fatty acids.
5.

Medium·Determine[1 mark]

A solution stays blue when heated with Benedict’s reagent. After boiling with dilute hydrochloric acid and neutralising, it gives a brick-red precipitate with Benedict’s reagent. Determine what the solution contains.
Show answer and explanation

Answer: B · Worked explanation

The first test was negative, so there was no reducing sugar. Acid hydrolysis broke a glycosidic bond and released reducing sugars, so the second test was positive. This pattern shows a non-reducing sugar such as sucrose. A reducing sugar would have given the colour change in the first test.
6.

Medium·Explain[1 mark]

Explain why the temperature of a large pond changes only slowly.
Show answer and explanation

Answer: D · Worked explanation

Water has a high specific heat capacity because a lot of energy is needed to break hydrogen bonds before the molecules move faster. Water molecules are polar, not non-polar. Being a good solvent does not explain slow temperature change. Cohesion explains how water forms columns in plant stems, not how it resists temperature change.
7.

Medium·Compare[1 mark]

Compare starch and cellulose. Which statement is correct?
Show answer and explanation

Answer: C · Worked explanation

Starch is made of α-glucose units, which gives coiled and branched chains. Cellulose is made of β-glucose with alternate units turned over, which gives straight chains. The reverse statement swaps the two isomers, so it is wrong. The statement that both are made of α-glucose is also wrong, because cellulose contains β-glucose.
8.

Hard·Determine[2 marks]

A sample gives a purple colour with biuret reagent, blue-black with iodine solution, and stays blue when heated with Benedict’s reagent. Determine what the sample contains.
Show answer and explanation

Answer: C · Worked explanation

Purple with biuret reagent shows protein, and blue-black with iodine shows starch. A sample that stays blue with Benedict’s reagent contains no reducing sugar. The option stating protein only ignores the positive iodine test for starch. The option stating protein and reducing sugar contradicts the blue result with Benedict’s reagent.
9.

Hard·Identify[2 marks]

Which bonds directly maintain the tertiary structure of a protein?
Show answer and explanation

Answer: A · Worked explanation

Tertiary structure is held by hydrogen bonds, ionic bonds, disulfide bonds and hydrophobic interactions between R groups. Peptide bonds hold the primary structure. They form the backbone but do not fold the polypeptide into its three-dimensional shape. Phosphodiester and glycosidic bonds are found in nucleic acids and carbohydrates, not between R groups.
10.

Hard·Determine[2 marks]

A polysaccharide chain is made of 200 glucose units joined in one unbranched chain. Determine how many molecules of water were released when it formed.
Show answer and explanation

Answer: A · Worked explanation

Joining two units releases one water molecule, so a chain of n units needs n − 1 bonds. Here, 200 − 1 = 199 condensation reactions release 199 molecules of water. The value 200 comes from assuming one water molecule per unit, but the first unit forms no bond on its own.

Keep going

Next topic2.1.3 Nucleotides and nucleic acidsPrevious topic2.1.1 Cell structure

More in Section 2 · Module 2: Foundations in biology

  1. 2.1.1Cell structureNotes · 10 questions
  2. 2.1.2Biological moleculesNotes · 10 questions
  3. 2.1.3Nucleotides and nucleic acidsNotes · 10 questions
  4. 2.1.4EnzymesNotes · 10 questions
  5. 2.1.5Biological membranesNotes · 10 questions
  6. 2.1.6Cell division and organisationNotes · 10 questions

All OCR A-level Biology A topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by OCR or any exam board.

On this page

0/7 read

  1. 1Sugars join by condensation reactions to form larger carbohydrates
  2. 2Polysaccharides are long chains that store energy or give strength
  3. 3Lipids are insoluble molecules that store energy and form membranes
  4. 4Proteins are chains of amino acids folded into precise shapes
  5. 5Biochemical tests identify sugars, starch, proteins and lipids
  6. 6Hydrogen bonding gives water its useful properties
  7. 7Inorganic ions have specific jobs in living organisms
  8. Check your recall
  9. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe