OCR A-level Biology A · Section 6 · Module 6: Genetics, evolution and ecosystems
6.3.2 Populations and sustainability
Describe how population size is estimated, explain what limits population growth, and compare how management, conservation and human activities affect biodiversity.
1/7Sampling lets us estimate the size of a population
- Sampling lets us estimate the size of a population
- Mark–release–recapture estimates the size of mobile populations
- Limiting factors set an upper limit on population growth
- Sustainable management keeps resources available for the future
- Conservation allows sustainable use while preservation excludes it
- Species can be protected in their habitat or elsewhere
- Human activities reduce biodiversity in different ways
- Check your recall
- Practice: 10 questions
Part 1 of 7: Sampling lets us estimate the size of a population
Counting every dandelion on a school field would take days. Instead, biologists count a small part of the habitat and scale the result up. Each estimate is for one population, meaning the members of a single species in one area.
For plants and slow-moving animals, use a quadrat, a square frame of known area. Place it at random positions, chosen with random coordinates. Random placement stops the sampler favouring areas that look interesting.
Where conditions change gradually, such as up a shore, lay a transect. Take samples along it at set intervals. This shows how abundance changes with distance.
Worked example
Estimating plant numbers with quadrats
- Word equation: population estimate = mean density × area of the habitat.
- Mean count per quadrat: plants.
- Density: .
- Estimate: plants.
Answer: The population size is plants.
Key terms · tap one for its definition
population
A population is a group of individuals of the same species living in the same area.
quadrat
A quadrat is a frame of known area placed on the ground so the organisms inside it can be counted.
transect
A transect is a line or belt across a habitat along which organisms are sampled at set intervals.
Part 2 of 7: Mark–release–recapture estimates the size of mobile populations
A quadrat is no use for a beetle that runs away. Mobile animals need the mark–release–recapture method.
Catch a sample, mark each animal harmlessly, and release it. Leave time for the animals to mix back in. Then catch a second sample and count the marked ones. The marked fraction of the second sample should match the marked fraction of the whole population, so .
- is the estimated population size.
- is the number marked and released.
- is the number in the second sample.
- is the number of marked animals in the second sample.
Worked example
Estimating a beetle population
- Word equation: estimate = (marked in first sample × size of second sample) divided by marked in second sample.
- Symbol equation: , with , and .
- Substitute: .
- Calculate: .
Answer: The estimated population is 200 beetles.
Key term
mark–release–recapture
Mark–release–recapture is a method that estimates the size of a mobile population from the proportion of marked animals in a second sample.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: B · Worked explanation
Part 3 of 7: Limiting factors set an upper limit on population growth
Once a population has been counted, we can ask what stops it growing. A few bacteria in fresh broth multiply quickly. Later, growth slows and numbers level off. A limiting factor, such as food, space or oxygen, restricts how large the population can become.
The population then stays close to a stable size. This size is the carrying capacity of the environment. Near it, birth rate falls and death rate rises, until the two balance.
Some limiting factors act harder when the population is crowded. Competition for food, predation and disease are each a density-dependent factor. Others, such as a severe frost, act whatever the density.
Key terms · tap one for its definition
limiting factor
A limiting factor is a resource or condition in short supply that restricts the growth of a population.
carrying capacity
The population size that an environment can support over time.
density-dependent factor
A density-dependent factor is a limiting factor whose effect on a population increases as the population density rises.
Part 4 of 7: Sustainable management keeps resources available for the future
People also take timber and fish from natural populations. Taking too many leaves too few breeding adults. Sustainable use meets present needs without reducing what future generations can obtain.
Achieving this takes careful management of the resource. Each method below lets enough individuals survive to reproduce.
- Forestry
- Selective felling removes some mature trees and leaves others to seed.
- Replanting puts new trees in place of those felled.
- Coppicing cuts stems near the ground so they regrow.
- Fishing
- Larger mesh nets let young fish escape and grow.
- Quotas limit the total catch of each species.
- Closed seasons protect fish while they breed.
Key terms · tap one for its definition
sustainable use
Sustainable use is the use of a resource at a rate that allows it to be renewed for future generations.
management
Management involves planned actions to maintain or restore ecosystem conditions.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 5 of 7: Conservation allows sustainable use while preservation excludes it
Management can also aim to protect nature itself. Conservation protects species, habitats and the ecological processes that sustain them. It allows sustainable human use and may restore damaged areas.
Preservation is stricter. It keeps an area as it is, with human activity excluded or kept to a minimum.
Conservation and preservation compared
- Feature
- Human use
- Conservation
- Allowed if sustainable
- Preservation
- Excluded or minimal
- Feature
- Management
- Conservation
- Active, such as controlling grazing
- Preservation
- Mostly left alone
- Feature
- Aim
- Conservation
- Maintain or restore ecosystems
- Preservation
- Keep the area unchanged
Both protect biodiversity. People value it for ecological, economic and ethical reasons. Ecosystems provide food, clean water and pollination. Species may supply future medicines or crops. Many people also hold that species have a right to exist.
Key terms · tap one for its definition
conservation
Conservation protects species, habitats and the ecological processes that sustain them.
preservation
Preservation is the protection of an area in its existing state, with human activity excluded or kept to a minimum.
biodiversity
Biodiversity is variation within species, between species, and among ecosystems.
Part 6 of 7: Species can be protected in their habitat or elsewhere
Conservation takes different forms, depending on how threatened a species is. In situ conservation protects species in their natural habitat. Examples are nature reserves, marine protected areas and laws against hunting. Whole communities and their food webs are protected together.
Ex situ conservation keeps species outside their habitat. Zoos run captive breeding programmes, and seed banks store seeds of rare plants. Offspring may later be released, but only if suitable habitat remains.
In situ and ex situ conservation compared
- Feature
- Setting
- In situ
- Natural habitat
- Ex situ
- Zoo, seed bank or botanic garden
- Feature
- Strength
- In situ
- Keeps natural behaviour and food webs
- Ex situ
- Protects species whose habitat is lost
- Feature
- Limitation
- In situ
- Hard to control threats such as poaching
- Ex situ
- Few individuals give a small gene pool
Many programmes combine both approaches. International agreements limiting trade in endangered species also help, because wildlife crosses borders.
Key terms · tap one for its definition
in situ conservation
In situ conservation is the protection of species within their natural habitat.
ex situ conservation
Ex situ conservation is the protection of species outside their natural habitat, for example in zoos or seed banks.
Part 7 of 7: Human activities reduce biodiversity in different ways
Conservation is needed because human activities already reduce biodiversity. Clearing land removes habitats, so the species living there decline. Overharvesting removes individuals faster than breeding replaces them. Introduced species can also out-compete native ones. Farming often replaces varied habitats with a monoculture, a single crop over a large area.
Human activities and their effects on biodiversity
- Activity
- Deforestation
- Main effect
- Habitat destroyed and broken up
- Result
- Fewer species, isolated populations
- Activity
- Intensive farming
- Main effect
- Monoculture, pesticides, fertilisers
- Result
- Fewer plant and insect species
- Activity
- Overharvesting
- Main effect
- Too many individuals removed
- Result
- Population and species decline
- Activity
- Urbanisation
- Main effect
- Land covered by buildings and roads
- Result
- Habitat loss and pollution
- Activity
- Introduced species
- Main effect
- Compete with or prey on native species
- Result
- Native species decline
Human activity can also help. Creating reserves and restoring habitats can increase the number of species in an area.
Key term
monoculture
A monoculture is the growing of a single crop species over a large area.
Check your recall[18 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Describe[4 marks]
Describe how quadrats are used to estimate the population size of a plant species in a field.
Show mark schemeHide mark scheme
Model answer
Place quadrats at random positions, using random coordinates. Count the plants in each quadrat and calculate the mean per quadrat. Multiply the mean by the field area divided by the quadrat area.
- 1 mark for placing quadrats at random positions using random coordinates
- 1 mark for counting the plants in each quadrat
- 1 mark for calculating the mean number per quadrat
- 1 mark for multiplying by the field area divided by the quadrat area
- 2.Calculate[3 marks]
Calculate the estimated population size when 60 animals are marked and released, a second sample has 45 animals, and 9 of them are marked.
Show mark schemeHide mark scheme
Model answer
animals.
- 1 mark for using
- 1 mark for substituting 60, 45 and 9 correctly
- 1 mark for obtaining 300 animals
- 3.Explain[3 marks]
Explain why a population stops growing when it reaches the carrying capacity.
Show mark schemeHide mark scheme
Model answer
Limiting factors such as food and space become scarce as the population rises. Birth rate falls and death rate rises. At the carrying capacity the two balance, so the size stays stable.
- 1 mark for identifying limiting factors such as food or space becoming scarce
- 1 mark for stating that birth rate falls or death rate rises
- 1 mark for stating that births and deaths balance so the size stays stable
- 4.Compare[3 marks]
Compare in situ conservation and ex situ conservation.
Show mark schemeHide mark scheme
Model answer
Both protect species. In situ conservation keeps species in their natural habitat, so food webs and natural behaviour are protected. Ex situ conservation uses places such as zoos or seed banks, which can save species whose habitat is lost but may give a small gene pool.
- 1 mark for stating that both protect threatened species
- 1 mark for stating that in situ happens in the natural habitat and ex situ elsewhere
- 1 mark for giving a strength or limitation of at least one method
- 5.Explain[3 marks]
Explain how larger mesh nets and fishing quotas make fishing more sustainable.
Show mark schemeHide mark scheme
Model answer
Larger mesh nets let young fish escape, so they grow and breed later. Quotas limit the total catch of each species. Both keep enough breeding adults for the population to renew itself.
- 1 mark for stating that larger mesh nets let young fish escape
- 1 mark for stating that quotas limit the catch
- 1 mark for linking both to enough individuals surviving to breed
- 6.Suggest[2 marks]
Suggest why replacing a varied meadow with a monoculture reduces biodiversity.
Show mark schemeHide mark scheme
Model answer
A monoculture offers fewer habitats and food sources, so fewer species can live there. Pesticides and fertilisers may also harm other species.
- 1 mark for stating that fewer habitats or food sources are available
- 1 mark for stating that fewer species can live there or that pesticides harm other species

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyIdentify[1 mark]
Show answer and explanation
Answer: C · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: D · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: B · Worked explanation
MediumPredict[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumExplain[1 mark]
Show answer and explanation
Answer: D · Worked explanation
HardPredict[2 marks]
Show answer and explanation
Answer: C · Worked explanation
HardCompare[2 marks]
Show answer and explanation
Answer: B · Worked explanation
HardExplain[2 marks]
Show answer and explanation
Answer: D · Worked explanation