Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus AB
  3. ›1 Limits and Continuity
  4. ›1.2 Limits and limit notation

AP Calculus AB · Unit 1 · Limits and Continuity

1.2 Limits and limit notation

Write limits in correct notation, explain when they exist, and interpret them on graphs.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Limit notation describes behavior near an input
  1. 1Limit notation describes behavior near an input
  2. 2A two-sided limit requires agreement from both sides
  3. 3A graph shows approached values, not just plotted points
  4. 4Match the graph’s approach to precise notation
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Limit notation describes behavior near an input

A limit describes the value a function approaches as its input approaches a chosen number. Write this as lim⁡x→af(x)=L\lim_{x\to a}f(x)=Llimx→a​f(x)=L. Read it as “the limit of f(x)f(x)f(x) as xxx approaches aaa is LLL.” Here, xxx is the input. The value aaa is the input being approached, and LLL is the output being approached.

The arrow in limit notation means “approaches.” It does not mean that xxx equals aaa. To write a limit, name the function, show which input value is approached, and give the output value approached. For example, lim⁡x→2f(x)=3\lim_{x\to 2}f(x)=3limx→2​f(x)=3 describes outputs near 3 for inputs near 2.

Key terms · tap one for its definition

limit

A limit is the value a function approaches as its input approaches a specified value.

limit notation

Limit notation names the function, the input being approached, and the output being approached.

Part 1 done

2

Part 2 of 4: A two-sided limit requires agreement from both sides

For a two-sided limit to equal LLL, the function must approach LLL from both sides of aaa. The left-hand notation is lim⁡x→a−f(x)\lim_{x\to a^-}f(x)limx→a−​f(x), and the right-hand notation is lim⁡x→a+f(x)\lim_{x\to a^+}f(x)limx→a+​f(x). The minus and plus signs show the direction of approach. They do not make the output negative or positive.

The two-sided limit exists when both one-sided limits exist and have the same finite value. If the left and right values differ, the two-sided limit does not exist. This test concerns outputs as xxx gets close to aaa, rather than only the output at aaa.

Exam tip

When explaining why a two-sided limit does not exist, state the left-hand and right-hand limits separately.

Key terms · tap one for its definition

two-sided limit

A two-sided limit describes the output approached as inputs approach a value from both sides.

one-sided limits

One-sided limits describe outputs approached from only the left or only the right.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the notation stating that g(u)g(u)g(u) approaches -2 as uuu approaches 5.
Show answer and explanation

Answer: C · Worked explanation

The notation lim⁡u→5g(u)=−2\lim_{u\to 5}g(u)=-2limu→5​g(u)=−2 names the function, the input value being approached, and the output value approached. The statement g(5)=−2g(5)=-2g(5)=−2 is tempting because it uses the same numbers, but it gives the function's value at exactly 5 rather than describing nearby outputs.
3

Part 3 of 4: A graph shows approached values, not just plotted points

On a graph, follow the curve toward the chosen input from the left and then from the right. Watch the height the curve approaches. A filled point shows the function’s value at that input. An open circle shows a point excluded from the graph at that location. Neither symbol alone determines the limit.

In the figure, the curve approaches a height of 3 meters from both sides of 2 seconds. The filled point instead gives h(2)=5h(2)=5h(2)=5 meters. Therefore, lim⁡t→2h(t)=3\lim_{t\to 2}h(t)=3limt→2​h(t)=3 meters. A limit can exist even when the function has a different value at the approached input.

Figure 1. Both curve segments approach the open circle. The filled point gives the height at exactly 2 seconds.

Common mistake

Do not use the filled point’s height as the limit without checking nearby curve values.

Key terms · tap one for its definition

filled point

A filled point marks an included graph point and gives the function’s value at its input.

open circle

An open circle marks a point excluded from the graph at that location.

Part 3 done

4

Part 4 of 4: Match the graph’s approach to precise notation

Choose notation that matches what the graph shows. Use x→a−x\to a^-x→a− when reading only the left side, and x→a+x\to a^+x→a+ when reading only the right side. Use x→ax\to ax→a when reporting a two-sided limit. State that a limit does not exist if the sides approach different values.

If a graph includes a separate point at x=ax=ax=a, report function value using f(a)f(a)f(a) instead of limit notation. These statements answer different questions. For example, f(a)=5f(a)=5f(a)=5 describes the plotted value at aaa. Meanwhile, lim⁡x→af(x)=3\lim_{x\to a}f(x)=3limx→a​f(x)=3 describes the nearby behavior. Keep the input and output labels consistent when the graph uses variables other than xxx and yyy.

Worked example

Read a limit from a height graph

A graph of height h(t)h(t)h(t) shows a curve approaching 3 meters from each side of 2 seconds. A filled point at 2 seconds has height 5 meters. Determine the limit and function value.
  1. 1
    Read the left approach: lim⁡t→2−h(t)=3 m\lim_{t\to 2^-}h(t)=3\,\mathrm{m}limt→2−​h(t)=3m.
  2. 2
    Read the right approach: lim⁡t→2+h(t)=3 m\lim_{t\to 2^+}h(t)=3\,\mathrm{m}limt→2+​h(t)=3m.
  3. 3
    The approaches agree, so lim⁡t→2h(t)=3 m\lim_{t\to 2}h(t)=3\,\mathrm{m}limt→2​h(t)=3m.
  4. 4
    Read the filled point: h(2)=5 mh(2)=5\,\mathrm{m}h(2)=5m.

Answer: The limit is 3 meters, and the function value is 5 meters.

Key term

function value

A function value is the output assigned to a particular input, written as f(a)f(a)f(a).

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Write[2 marks]

    Write notation stating that f(x)f(x)f(x) approaches 7 as xxx approaches 4.

    Show mark schemeHide mark scheme

    Model answer

    lim⁡x→4f(x)=7\lim_{x\to 4}f(x)=7limx→4​f(x)=7.

    • 1 mark for placing x→4x\to 4x→4 beneath the limit symbol
    • 1 mark for writing f(x)=7f(x)=7f(x)=7 after the limit symbol
  2. 2.Explain[3 marks]

    Explain when a finite two-sided limit exists at x=ax=ax=a.

    Show mark schemeHide mark scheme

    Model answer

    Both one-sided limits must exist and equal the same finite value. The value of f(a)f(a)f(a) does not decide this.

    • 1 mark for stating that the left-hand limit must exist
    • 1 mark for stating that the right-hand limit must exist and equal the left-hand limit
    • 1 mark for distinguishing the limit from the function value at aaa
  3. 3.Interpret[3 marks]

    On the height graph, interpret lim⁡t→2h(t)=3 m\lim_{t\to 2}h(t)=3\,\mathrm{m}limt→2​h(t)=3m and state h(2)h(2)h(2).

    Show mark schemeHide mark scheme

    Model answer

    As time approaches 2 seconds from either side, height approaches 3 meters. At exactly 2 seconds, h(2)=5 mh(2)=5\,\mathrm{m}h(2)=5m.

    • 1 mark for describing time approaching 2 seconds
    • 1 mark for stating that height approaches 3 meters from both sides
    • 1 mark for stating that h(2)=5 mh(2)=5\,\mathrm{m}h(2)=5m
  4. 4.Determine[3 marks]

    A graph approaches 2 meters as xxx approaches 1 from the left and 4 meters from the right. Determine the two-sided limit and justify your answer.

    Show mark schemeHide mark scheme

    Model answer

    lim⁡x→1−f(x)=2 m\lim_{x\to 1^-}f(x)=2\,\mathrm{m}limx→1−​f(x)=2m and lim⁡x→1+f(x)=4 m\lim_{x\to 1^+}f(x)=4\,\mathrm{m}limx→1+​f(x)=4m. The two-sided limit does not exist because these values differ.

    • 1 mark for identifying the left-hand limit as 2 meters
    • 1 mark for identifying the right-hand limit as 4 meters
    • 1 mark for stating that the two-sided limit does not exist because the one-sided limits differ
  5. 5.Compare[2 marks]

    Compare what an open circle and a filled point show at the same input on a graph.

    Show mark schemeHide mark scheme

    Model answer

    An open circle marks an excluded point. A filled point gives the function’s value at that input.

    • 1 mark for identifying the open circle as an excluded point
    • 1 mark for identifying the filled point as the function value

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State what it means for the two-sided limit of p(x)p(x)p(x) to equal LLL as xxx approaches aaa.
Show answer and explanation

Answer: D · Worked explanation

A two-sided limit describes the output approached as the input gets close to aaa from both the left and the right. Requiring p(a)=Lp(a)=Lp(a)=L is a tempting interpretation, but the function's value at the input itself does not determine the limit.
3.

Easy·Interpret[1 mark]

Interpret the statement lim⁡x→6q(x)=4\lim_{x\to 6}q(x)=4limx→6​q(x)=4 in terms of a graph.
Show answer and explanation

Answer: A · Worked explanation

The notation says that the graph's output approaches 4 as the input approaches 6 from both directions. Passing through (6,4)(6,4)(6,4) is not required: that point would specify the function value at 6, which can differ from the nearby behavior.
4.

Easy·Identify[1 mark]

Identify the notation for the value that r(s)r(s)r(s) approaches as sss approaches 3 from the right.
Show answer and explanation

Answer: B · Worked explanation

The plus sign in s→3+s\to 3^+s→3+ indicates that the input approaches 3 from values greater than 3. The notation with 3−3^-3− instead describes approach from the left; the sign indicates direction of approach, not whether the output is positive or negative.
5.

Medium·Write[1 mark]

A quantity C(t)C(t)C(t) approaches 12 as time ttt approaches 8 seconds. Write the limit statement using the variable shown.
Show answer and explanation

Answer: B · Worked explanation

The input is time ttt, so it belongs beneath the limit symbol as t→8t\to 8t→8, and the approached output is 12. Writing C(8)=12C(8)=12C(8)=12 would assert a value at exactly 8 seconds, which is not what the stated nearby behavior alone establishes.
6.

Medium·Determine[1 mark]

A graph approaches height 7 as xxx approaches 2 from the left and height 7 from the right. A filled point at x=2x=2x=2 is at height 1. Determine the two-sided limit.
Show answer and explanation

Answer: D · Worked explanation

Both one-sided approaches have height 7, so the two-sided limit is 7. The filled point at height 1 gives the function value at x=2x=2x=2; using that value as the limit confuses the plotted value at the input with the behavior of nearby points.
7.

Medium·Determine[1 mark]

As xxx approaches -1, the left-hand limit of m(x)m(x)m(x) is 4 and the right-hand limit is 4. Determine whether the two-sided limit exists.
Show answer and explanation

Answer: A · Worked explanation

The left-hand and right-hand limits both exist and equal the same finite value, 4, so the two-sided limit exists and equals 4. Requiring m(−1)=4m(-1)=4m(−1)=4 is a common confusion: the value at the input does not have to match the limit.
8.

Medium·Interpret[2 marks]

A graph of distance d(t)d(t)d(t) has its curve approaching 9 meters as ttt approaches 4 seconds from the right. Interpret lim⁡t→4+d(t)=9 m\lim_{t\to 4^+}d(t)=9\,\mathrm{m}limt→4+​d(t)=9m.
Show answer and explanation

Answer: C · Worked explanation

The superscript plus indicates approach from times greater than 4 seconds, and the output approached is 9 meters. Saying the distance is 9 meters at exactly 4 seconds is tempting, but a one-sided limit describes nearby inputs on one side, not necessarily the function value.
9.

Medium·Explain[2 marks]

A graph has a left-hand limit of -3 and a right-hand limit of 2 at x=0x=0x=0. Explain what this implies about the two-sided limit.
Show answer and explanation

Answer: D · Worked explanation

A two-sided limit exists only when both one-sided limits agree, and here -3 differs from 2. Averaging the one-sided values is a tempting but invalid operation: the limit is not defined as an average, and the disagreement means there is no single value approached from both sides.
10.

Hard·Deduce[2 marks]

A graph of F(x)F(x)F(x) approaches height 6 from the left of x=3x=3x=3 and height 6 from the right. At x=3x=3x=3, the graph has a filled point at height -2 and an open circle at height 6. Deduce the limit and the function value.
Show answer and explanation

Answer: A · Worked explanation

The curve approaches 6 from both sides, so lim⁡x→3F(x)=6\lim_{x\to 3}F(x)=6limx→3​F(x)=6. The filled point gives the actual function value F(3)=−2F(3)=-2F(3)=−2, while the open circle at height 6 marks an excluded point; using the open circle as the function value reverses what the two symbols indicate.

Keep going

Next topic1.3 Estimating limits from graphsPrevious topic1.1 Change at an instant

More in Unit 1 · Limits and Continuity

  1. 1.1Change at an instantNotes · 10 questions
  2. 1.2Limits and limit notationNotes · 10 questions
  3. 1.3Estimating limits from graphsNotes · 10 questions
  4. 1.4Estimating limits from tablesNotes · 10 questions
  5. 1.5Algebraic properties of limitsNotes · 10 questions
  6. 1.6Limits by algebraic manipulationNotes · 10 questions
  7. 1.7Choosing a limit procedureNotes · 10 questions
  8. 1.8Squeeze theoremNotes · 10 questions
  9. 1.9Multiple representations of limitsNotes · 10 questions

All AP Calculus AB topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Limit notation describes behavior near an input
  2. 2A two-sided limit requires agreement from both sides
  3. 3A graph shows approached values, not just plotted points
  4. 4Match the graph’s approach to precise notation
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe