Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus AB
  3. ›1 Limits and Continuity
  4. ›1.4 Estimating limits from tables

AP Calculus AB · Unit 1 · Limits and Continuity

1.4 Estimating limits from tables

Estimate limits from tables, identify one-sided limits, and recognize when a limit does not exist.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Table values show how a function behaves near a point
  1. 1Table values show how a function behaves near a point
  2. 2Both sides must approach the same limit
  3. 3Different one-sided limits rule out a two-sided limit
  4. 4A finite table supports an estimate, not a proof
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Table values show how a function behaves near a point

A limit describes the value a function approaches as its input approaches a given number. A table helps estimate that value using inputs close to the number. Check values on both sides when they are available. Inputs below the number approach from the left. Inputs above it approach from the right. Read each side toward the target input, rather than reading down the table.

Values of a function near x=2x=2x=2

xxxf(x)f(x)f(x)
1.93.9
1.993.99
1.9993.999
2.0014.001
2.014.01
2.14.1
$x$
1.9
f(x)f(x)f(x)
3.9
$x$
1.99
f(x)f(x)f(x)
3.99
$x$
1.999
f(x)f(x)f(x)
3.999
$x$
2.001
f(x)f(x)f(x)
4.001
$x$
2.01
f(x)f(x)f(x)
4.01
$x$
2.1
f(x)f(x)f(x)
4.1

Here, outputs on both sides move toward 4. The table therefore suggests a limit of 4 as xxx approaches 2.

Key terms · tap one for its definition

limit

A limit is the value a function approaches as its input approaches a specified number.

from the left

Approaching from the left means using inputs below the target that move closer to it.

from the right

Approaching from the right means using inputs above the target that move closer to it.

Part 1 done

2

Part 2 of 4: Both sides must approach the same limit

A left-hand limit uses only inputs smaller than the target. A right-hand limit uses only inputs larger than the target. Estimate each one from the closest available values. If both estimates agree, the table suggests a two-sided limit. This remains true even if the function has a different value at the target input.

Worked example

Estimate a limit from the table

Using the table above, estimate the limit of f(x)f(x)f(x) as xxx approaches 2.
  1. 1
    From the left, f(1.99)=3.99f(1.99)=3.99f(1.99)=3.99 and f(1.999)=3.999f(1.999)=3.999f(1.999)=3.999 approach 4.
  2. 2
    From the right, f(2.01)=4.01f(2.01)=4.01f(2.01)=4.01 and f(2.001)=4.001f(2.001)=4.001f(2.001)=4.001 approach 4.
  3. 3
    Both sides suggest the same limiting value.

Answer: The estimated limit is 4 (no units given).

Common mistake

The value at the target input does not determine the limit. Nearby values determine the estimate.

Key terms · tap one for its definition

left-hand limit

A left-hand limit describes what a function approaches as inputs approach the target from below.

right-hand limit

A right-hand limit describes what a function approaches as inputs approach the target from above.

Part 2 done

Quick check

One question on the part you just read

Easy

Estimate the limit of h(x)h(x)h(x) as xxx approaches 5. The table gives h(4.9)=7.8h(4.9)=7.8h(4.9)=7.8, h(4.99)=7.98h(4.99)=7.98h(4.99)=7.98, h(5.01)=8.02h(5.01)=8.02h(5.01)=8.02, and h(5.1)=8.2h(5.1)=8.2h(5.1)=8.2.
Show answer and explanation

Answer: B · Worked explanation

The outputs for inputs below 5 move toward 8, and the outputs for inputs above 5 also move toward 8. The table therefore suggests a limit of 8. The value 8.2 is an output at an input farther from 5, not the value the outputs approach as the inputs get closer.
3

Part 3 of 4: Different one-sided limits rule out a two-sided limit

Sometimes the two sides suggest different values. In that case, the two-sided limit does not exist. Consider the table below as xxx approaches 1. Values on the left approach 1. Values on the right approach 3. Neither side needs a function value at exactly x=1x=1x=1 to reveal this difference.

Different behavior on either side of x=1x=1x=1

xxxg(x)g(x)g(x)
0.90.9
0.990.99
0.9990.999
1.0013.001
1.013.01
1.13.1
$x$
0.9
g(x)g(x)g(x)
0.9
$x$
0.99
g(x)g(x)g(x)
0.99
$x$
0.999
g(x)g(x)g(x)
0.999
$x$
1.001
g(x)g(x)g(x)
3.001
$x$
1.01
g(x)g(x)g(x)
3.01
$x$
1.1
g(x)g(x)g(x)
3.1

Exam tip

State both one-sided estimates before concluding that the two-sided limit does not exist.

Key term

two-sided limit

A finite two-sided limit exists when the left-hand and right-hand limits exist and are equal.

Part 3 done

4

Part 4 of 4: A finite table supports an estimate, not a proof

A table contains only selected inputs. It cannot show every value arbitrarily close to the target. Treat a table estimate as evidence of a trend, not proof that the trend continues. Use several values increasingly close to the target on each side. If the outputs fail to settle near one number, the table may suggest no finite limit. This can happen when outputs grow without bound or keep changing direction.

A few unusual entries can also hide a pattern. Compare the closest values first, then check whether earlier values support the same estimate.

Common mistake

A missing row at the target does not mean the limit does not exist. The nearby behavior matters.

Key term

table estimate

A table estimate uses nearby input-output pairs to suggest a function's limiting behavior.

Note read

Check your recall[13 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[1 mark]

    Identify which table inputs approach 2 from the left: 1.99, 2.01, and 1.999.

    Show mark schemeHide mark scheme

    Model answer

    The inputs are 1.99 and 1.999.

    • 1 mark for identifying both 1.99 and 1.999, and excluding 2.01
  2. 2.Determine[2 marks]

    Determine the left-hand and right-hand limits suggested by the table of g(x)g(x)g(x) near x=1x=1x=1.

    Show mark schemeHide mark scheme

    Model answer

    The left-hand limit is 1, and the right-hand limit is 3.

    • 1 mark for identifying 1 as the left-hand limit
    • 1 mark for identifying 3 as the right-hand limit
  3. 3.Explain[3 marks]

    Explain why the table of g(x)g(x)g(x) suggests no two-sided limit at x=1x=1x=1.

    Show mark schemeHide mark scheme

    Model answer

    From the left, g(x)g(x)g(x) approaches 1. From the right, it approaches 3. These one-sided limits differ, so the two-sided limit does not exist.

    • 1 mark for stating that the left-hand limit is 1
    • 1 mark for stating that the right-hand limit is 3
    • 1 mark for concluding that different one-sided limits mean the two-sided limit does not exist
  4. 4.Estimate[3 marks]

    Estimate the limit of f(x)f(x)f(x) as xxx approaches 2 using the table, and support your estimate.

    Show mark schemeHide mark scheme

    Model answer

    The limit is approximately 4. Values from below approach 4, and values from above also approach 4.

    • 1 mark for estimating the limit as 4
    • 1 mark for using values below 2 to support the estimate
    • 1 mark for using values above 2 to support the estimate
  5. 5.Explain[2 marks]

    Explain why a table can suggest a limit even when the function value at the target is missing.

    Show mark schemeHide mark scheme

    Model answer

    A limit depends on outputs at nearby inputs, not the output at the target. A table can show those nearby outputs approaching a value.

    • 1 mark for stating that the function value at the target does not determine the limit
    • 1 mark for stating that nearby outputs can suggest a value they approach
  6. 6.Evaluate[2 marks]

    Evaluate the claim that a finite table proves a limit exists.

    Show mark schemeHide mark scheme

    Model answer

    The claim is incorrect. A finite table shows only selected values, so it supports an estimate but cannot prove the behavior continues arbitrarily close to the target.

    • 1 mark for rejecting the claim that a finite table proves a limit
    • 1 mark for explaining that selected values cannot establish all behavior arbitrarily close to the target

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify the conclusion suggested by a table in which values of p(x)p(x)p(x) approach 2 as xxx approaches 6 from the left and approach 5 from the right.
Show answer and explanation

Answer: D · Worked explanation

A finite two-sided limit requires the left-hand and right-hand limits to exist and be equal. Here, the left-hand estimate is 2 and the right-hand estimate is 5, so the table suggests that the two-sided limit does not exist. Averaging the two estimates does not give the limiting value.
3.

Easy·Identify[1 mark]

Identify the right-hand limit suggested by these data near x=3x=3x=3: q(3.2)=10.4q(3.2)=10.4q(3.2)=10.4, q(3.02)=10.04q(3.02)=10.04q(3.02)=10.04, and q(3.002)=10.004q(3.002)=10.004q(3.002)=10.004.
Show answer and explanation

Answer: D · Worked explanation

All listed inputs are greater than 3, so they approach 3 from the right. As those inputs get closer to 3, the outputs get closer to 10, suggesting a right-hand limit of 10. The target input is 3; the output values approach 10 rather than 3.
4.

Easy·Recognize[1 mark]

Recognize which output value the table suggests r(x)r(x)r(x) approaches as xxx approaches 0: r(−0.1)=1.9r(-0.1)=1.9r(−0.1)=1.9, r(−0.01)=1.99r(-0.01)=1.99r(−0.01)=1.99, r(0.01)=2.01r(0.01)=2.01r(0.01)=2.01, and r(0.1)=2.1r(0.1)=2.1r(0.1)=2.1.
Show answer and explanation

Answer: D · Worked explanation

The outputs on the left of 0 get closer to 2, and the outputs on the right of 0 also get closer to 2. Thus the table suggests that the limit is 2. The value 2.1 is one listed output, but it occurs at an input that is not as close to 0 as the other listed inputs.
5.

Medium·Estimate[1 mark]

Estimate the limit of u(x)u(x)u(x) as xxx approaches 4. The table gives u(3.9)=6.2u(3.9)=6.2u(3.9)=6.2, u(3.99)=6.02u(3.99)=6.02u(3.99)=6.02, u(4.01)=5.98u(4.01)=5.98u(4.01)=5.98, and u(4.1)=5.8u(4.1)=5.8u(4.1)=5.8.
Show answer and explanation

Answer: C · Worked explanation

The closest entries on the left and right, u(3.99)=6.02u(3.99)=6.02u(3.99)=6.02 and u(4.01)=5.98u(4.01)=5.98u(4.01)=5.98, both suggest that the outputs are approaching 6. The more distant values also fit that trend. The value 6.2 is an output at 3.9, not the limiting value indicated by both sides.
6.

Medium·Determine[2 marks]

Determine the left-hand limit of v(x)v(x)v(x) as xxx approaches 2. The table gives v(1.5)=4.8v(1.5)=4.8v(1.5)=4.8, v(1.9)=4.98v(1.9)=4.98v(1.9)=4.98, v(1.99)=4.998v(1.99)=4.998v(1.99)=4.998, v(2.01)=7.002v(2.01)=7.002v(2.01)=7.002, and v(2.1)=7.02v(2.1)=7.02v(2.1)=7.02.
Show answer and explanation

Answer: A · Worked explanation

For a left-hand limit, use only inputs less than 2 and compare their outputs as the inputs get closer to 2. The values 4.8, 4.98, and 4.998 approach 5, so the left-hand limit is estimated as 5. The outputs near 7 come from inputs greater than 2 and are relevant to the right-hand limit instead.
7.

Medium·Estimate[2 marks]

Estimate the limit of a(x)a(x)a(x) as xxx approaches 10. On the left, the outputs are 19.6, 19.96, and 19.996 for inputs increasingly close to 10; on the right, they are 20.4, 20.04, and 20.004 for inputs increasingly close to 10.
Show answer and explanation

Answer: D · Worked explanation

The outputs on the left approach 20 from below, and the outputs on the right approach 20 from above. Both sides therefore support an estimate of 20 for the limit. The number 19.996 is only one output, and the outputs closer to the target on the right also approach 20.
8.

Hard·Evaluate[2 marks]

Evaluate the claim that the table establishes a finite limit for c(x)c(x)c(x) as xxx approaches 0. For inputs approaching 0 from either side, the outputs are alternately close to 1 and close to 4, with the alternation continuing for the closest listed inputs.
Show answer and explanation

Answer: A · Worked explanation

A finite limit requires outputs to settle near one value as inputs approach the target. Continuing to switch between values close to 1 and values close to 4 does not suggest that behavior, so the table suggests there is no single limiting value. Staying bounded between 1 and 4, or averaging those values, does not establish convergence to one number.
9.

Hard·Deduce[2 marks]

Deduce what the table suggests about a finite limit of d(x)d(x)d(x) as xxx approaches 3. From the left, the outputs are 12, 120, and 1200 as inputs get closer to 3; from the right, they are 15, 150, and 1500 as inputs get closer to 3.
Show answer and explanation

Answer: D · Worked explanation

As the inputs get closer to 3, the outputs increase by factors of 10 on both sides rather than settling near a finite number. The table therefore suggests that no finite limit exists. The input approaching 3 does not force the output to approach 3, and averaging the first outputs does not reflect the increasing trend.
10.

Hard·Compare[2 marks]

Compare the one-sided behavior of m(x)m(x)m(x) near x=5x=5x=5. For inputs just below 5, the outputs are 9.8, 9.98, and 9.998 as the inputs get closer; for inputs just above 5, the outputs are 10.2, 10.02, and 10.002 as the inputs get closer. Which conclusion is best supported?
Show answer and explanation

Answer: C · Worked explanation

The left-side outputs approach 10 from below, while the right-side outputs approach 10 from above. The one-sided limits are therefore both estimated as 10, so the table suggests a two-sided limit of 10. Opposite directions of approach do not imply different limits; the values approached are the same.

Keep going

Next topic1.5 Algebraic properties of limitsPrevious topic1.3 Estimating limits from graphs

More in Unit 1 · Limits and Continuity

  1. 1.1Change at an instantNotes · 10 questions
  2. 1.2Limits and limit notationNotes · 10 questions
  3. 1.3Estimating limits from graphsNotes · 10 questions
  4. 1.4Estimating limits from tablesNotes · 10 questions
  5. 1.5Algebraic properties of limitsNotes · 10 questions
  6. 1.6Limits by algebraic manipulationNotes · 10 questions
  7. 1.7Choosing a limit procedureNotes · 10 questions
  8. 1.8Squeeze theoremNotes · 10 questions
  9. 1.9Multiple representations of limitsNotes · 10 questions

All AP Calculus AB topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Table values show how a function behaves near a point
  2. 2Both sides must approach the same limit
  3. 3Different one-sided limits rule out a two-sided limit
  4. 4A finite table supports an estimate, not a proof
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe