Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus AB
  3. ›4 Contextual Applications of Differentiation
  4. ›4.2 Straight-line motion

AP Calculus AB · Unit 4 · Contextual Applications of Differentiation

4.2 Straight-line motion

Explain how position, velocity, and acceleration describe straight-line motion and use functions and graphs to analyze direction and rest.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Position records location along a chosen line
  1. 1Position records location along a chosen line
  2. 2Velocity and acceleration describe changes in motion
  3. 3The sign of velocity reveals direction and rest
  4. 4Motion graphs connect slopes, signs, and turning points
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Position records location along a chosen line

A position function x(t)x(t)x(t) gives an object's location at time ttt relative to an origin. Choose one direction as positive. Positions on the other side of the origin are negative. Displacement is the change in position between two times: x(t2)−x(t1)x(t_2)-x(t_1)x(t2​)−x(t1​). It includes direction, unlike total distance traveled. For example, moving from 3 meters to -2 meters gives a displacement of -5 meters. The negative sign shows a change in the negative direction.

Common mistake

A negative position does not mean an object is moving backward. Position gives location; velocity gives direction.

Key terms · tap one for its definition

position function

A position function assigns an object's signed location along a chosen line to each time.

displacement

Displacement is final position minus initial position, including its sign.

Part 1 done

2

Part 2 of 4: Velocity and acceleration describe changes in motion

Velocity is the derivative of position with respect to time: v(t)=x′(t)=dxdtv(t)=x'(t)=\frac{dx}{dt}v(t)=x′(t)=dtdx​. It measures instantaneous change in position. Its sign shows direction, and its magnitude gives speed. Acceleration is the derivative of velocity: a(t)=v′(t)=x′′(t)a(t)=v'(t)=x''(t)a(t)=v′(t)=x′′(t). It measures how velocity changes. If position is measured in meters and time in seconds, velocity uses m/s\mathrm{m/s}m/s. Acceleration uses m/s2\mathrm{m/s^2}m/s2.

An object speeds up when velocity and acceleration have the same sign. It slows down when their signs differ. Negative acceleration alone does not mean slowing down: an object moving in the negative direction can speed up.

Key terms · tap one for its definition

velocity

Velocity is the instantaneous rate of change of position with respect to time.

acceleration

Acceleration is the instantaneous rate of change of velocity with respect to time.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the statement that correctly relates position, velocity, and acceleration in straight-line motion.
Show answer and explanation

Answer: B · Worked explanation

Velocity describes the instantaneous rate of change of position, so v(t)=s′(t)v(t)=s'(t)v(t)=s′(t). Acceleration describes the instantaneous rate of change of velocity, so a(t)=v′(t)=s′′(t)a(t)=v'(t)=s''(t)a(t)=v′(t)=s′′(t). The tempting reversal that makes position the derivative of velocity confuses a function with its derivative.
3

Part 3 of 4: The sign of velocity reveals direction and rest

An object is at rest at an instant when v(t)=0v(t)=0v(t)=0. It moves in the positive direction where v(t)>0v(t)>0v(t)>0. It moves in the negative direction where v(t)<0v(t)<0v(t)<0. To find direction over a time interval, first solve v(t)=0v(t)=0v(t)=0. Then check the sign of velocity between those times. A zero of velocity need not mark a direction change. Velocity can have the same sign on both sides.

Worked example

Find rest and direction from position

For 0≤t≤40\leq t\leq40≤t≤4, an object's position is x(t)=t2−4t+3x(t)=t^2-4t+3x(t)=t2−4t+3 meters, with ttt in seconds. Find its rest time and direction of motion.
  1. 1
    Differentiate: v(t)=x′(t)=2t−4v(t)=x'(t)=2t-4v(t)=x′(t)=2t−4 meters per second.
  2. 2
    Set velocity to zero: 2t−4=02t-4=02t−4=0, so t=2t=2t=2 seconds.
  3. 3
    For 0≤t<20\leq t<20≤t<2, 2t−4<02t-4<02t−4<0. For 2<t≤42<t\leq42<t≤4, 2t−4>02t-4>02t−4>0.

Answer: The object rests at t=2t=2t=2 seconds. It moves in the negative direction before then and the positive direction afterward.

Key term

at rest

An object is at rest at an instant when its velocity equals zero.

Part 3 done

4

Part 4 of 4: Motion graphs connect slopes, signs, and turning points

On a position graph, the slope of the tangent gives velocity. A horizontal tangent means rest at that instant. Rising and falling position graphs show positive and negative velocity, respectively. On a velocity graph, height above or below the time axis gives direction. Its slope gives acceleration. Where the graph meets the time axis, check both sides to see whether direction changes.

On an acceleration graph, height shows the sign of acceleration, not the direction of motion. Compare acceleration with velocity to decide whether speed increases or decreases. For the example above, acceleration is a(t)=2 m/s2a(t)=2\,\mathrm{m/s^2}a(t)=2m/s2. Before t=2t=2t=2 seconds, negative velocity and positive acceleration mean the object slows down.

Figure 1. The position curve is lowest when velocity reaches zero. Constant positive acceleration makes velocity rise throughout.

Key term

position graph

A position graph plots signed location against time; its tangent slope is velocity.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State the relationship between position and velocity.

    Show mark schemeHide mark scheme

    Model answer

    Velocity is the derivative of position with respect to time: v(t)=x′(t)v(t)=x'(t)v(t)=x′(t).

    • 1 mark for stating that velocity is the derivative of position with respect to time
  2. 2.Explain[3 marks]

    Explain how a velocity graph shows when an object rests and changes direction.

    Show mark schemeHide mark scheme

    Model answer

    The object rests where velocity is zero. Positive velocity means motion in the positive direction, while negative velocity means motion in the negative direction. Direction changes only if velocity changes sign across a zero.

    • 1 mark for identifying zero velocity as rest
    • 1 mark for linking the sign of velocity to direction
    • 1 mark for stating that a direction change requires velocity to change sign
  3. 3.Calculate[3 marks]

    Calculate velocity and acceleration at t=1t=1t=1 second if x(t)=t2−4t+3x(t)=t^2-4t+3x(t)=t2−4t+3 meters.

    Show mark schemeHide mark scheme

    Model answer

    v(t)=2t−4v(t)=2t-4v(t)=2t−4, so v(1)=−2 m/sv(1)=-2\,\mathrm{m/s}v(1)=−2m/s. Differentiating again gives a(t)=2a(t)=2a(t)=2, so a(1)=2 m/s2a(1)=2\,\mathrm{m/s^2}a(1)=2m/s2.

    • 1 mark for differentiating position to obtain v(t)=2t−4v(t)=2t-4v(t)=2t−4
    • 1 mark for calculating v(1)=−2 m/sv(1)=-2\,\mathrm{m/s}v(1)=−2m/s
    • 1 mark for calculating a(1)=2 m/s2a(1)=2\,\mathrm{m/s^2}a(1)=2m/s2
  4. 4.Interpret[2 marks]

    Interpret a horizontal tangent on a position graph and a positive slope on a velocity graph.

    Show mark schemeHide mark scheme

    Model answer

    The horizontal tangent means velocity is zero at that instant. The positive slope means acceleration is positive.

    • 1 mark for interpreting a horizontal position tangent as zero velocity
    • 1 mark for interpreting a positive velocity slope as positive acceleration
  5. 5.Analyze[3 marks]

    Analyze an object with negative velocity and positive acceleration. State its direction and how its speed changes.

    Show mark schemeHide mark scheme

    Model answer

    It moves in the negative direction because velocity is negative. Positive acceleration makes its velocity less negative. Its speed therefore decreases.

    • 1 mark for stating that the object moves in the negative direction
    • 1 mark for stating that positive acceleration makes velocity increase
    • 1 mark for concluding that speed decreases because velocity and acceleration have opposite signs

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Interpret[1 mark]

A position function s(t)s(t)s(t) is measured in meters and time ttt in seconds. What does s′(5)=3s'(5)=3s′(5)=3 mean?
Show answer and explanation

Answer: C · Worked explanation

Because s′(t)=v(t)s'(t)=v(t)s′(t)=v(t), the derivative of position at t=5t=5t=5 gives the instantaneous velocity at that time. Its units are meters per second. The value does not give the position, acceleration, or total displacement over the first 5 seconds.
3.

Easy·Determine[1 mark]

An object's velocity is v(t)=−4v(t)=-4v(t)=−4 meters per second at a particular instant. Determine its direction of motion at that instant.
Show answer and explanation

Answer: B · Worked explanation

The sign of velocity indicates direction: a negative velocity means the object is moving in the negative direction. Rest requires velocity to equal zero, not merely to be negative. Position gives location and is not needed to determine direction at this instant.
4.

Easy·Interpret[1 mark]

At a point on a position-versus-time graph, the curve is falling as time increases. What does this indicate at that point?
Show answer and explanation

Answer: D · Worked explanation

The slope of a position-versus-time graph gives velocity. A falling curve has a negative slope, so the object's velocity is negative and it is moving in the negative direction. A falling position curve does not by itself establish that position or acceleration is negative, and a horizontal tangent—not a falling one—indicates rest.
5.

Medium·Calculate[2 marks]

An object's position is s(t)=3t2−2t+1s(t)=3t^2-2t+1s(t)=3t2−2t+1 meters, where ttt is in seconds. Calculate its velocity at t=2t=2t=2 seconds.
Show answer and explanation

Answer: C · Worked explanation

Differentiate the position function to get v(t)=s′(t)=6t−2v(t)=s'(t)=6t-2v(t)=s′(t)=6t−2. At t=2t=2t=2, the velocity is 6(2)−2=10 m/s6(2)-2=10\,\text{m/s}6(2)−2=10m/s. The value s(2)=9s(2)=9s(2)=9 meters is the position, not the velocity; using the original function instead of its derivative is the tempting error.
6.

Medium·Determine[2 marks]

For 0≤t≤50\leq t\leq50≤t≤5, an object's velocity is v(t)=(t−1)(t−4)v(t)=(t-1)(t-4)v(t)=(t−1)(t−4) meters per second. Determine when it is at rest and its direction of motion between those times.
Show answer and explanation

Answer: B · Worked explanation

Setting (t−1)(t−4)=0(t-1)(t-4)=0(t−1)(t−4)=0 gives rest times t=1t=1t=1 and t=4t=4t=4. Testing the intervals gives positive velocity at t=0t=0t=0, negative velocity at t=2t=2t=2, and positive velocity at t=5t=5t=5, so the directions are positive, negative, and positive in sequence. Reversing these directions usually results from misreading the signs of the two factors.
7.

Medium·Deduce[2 marks]

A velocity-versus-time graph is a straight line that passes through (0,6)(0,6)(0,6) and (3,0)(3,0)(3,0), with time in seconds and velocity in meters per second. What can be deduced about acceleration and the object's motion for 0<t<30<t<30<t<3?
Show answer and explanation

Answer: B · Worked explanation

Acceleration is the slope of the velocity graph: (0−6)/(3−0)=−2 m/s2(0-6)/(3-0)=-2\,\text{m/s}^2(0−6)/(3−0)=−2m/s2. Between 0 and 3 seconds, velocity decreases from 6 to 0 but remains positive, so the object moves in the positive direction and slows down. A negative acceleration does not mean the object is moving in the negative direction.
8.

Medium·Calculate[2 marks]

An object's velocity is v(t)=5−2tv(t)=5-2tv(t)=5−2t meters per second. Calculate its acceleration and state whether its speed is increasing or decreasing at t=1t=1t=1 second.
Show answer and explanation

Answer: A · Worked explanation

Acceleration is the derivative of velocity, so a(t)=v′(t)=−2 m/s2a(t)=v'(t)=-2\,\text{m/s}^2a(t)=v′(t)=−2m/s2. At t=1t=1t=1, velocity is 5−2(1)=3 m/s5-2(1)=3\,\text{m/s}5−2(1)=3m/s, which is positive, while acceleration is negative; their opposite signs mean speed is decreasing. The value 3 is the velocity at that instant, not the acceleration.
9.

Medium·Interpret[2 marks]

A position-versus-time graph has a horizontal tangent at t=2t=2t=2 seconds and is rising immediately before and after that time. What is the best interpretation?
Show answer and explanation

Answer: C · Worked explanation

A horizontal tangent on a position graph has slope zero, so the object's velocity is zero at t=2t=2t=2 seconds and it is at rest at that instant. Since the graph rises on both sides, its slope and velocity are positive immediately before and after; there is no direction change. Zero velocity at one instant does not imply zero acceleration or continued rest.
10.

Hard·Analyze[2 marks]

For 0≤t≤40\leq t\leq40≤t≤4, an object's position is s(t)=t3−3t2+2s(t)=t^3-3t^2+2s(t)=t3−3t2+2 meters. Determine its rest times and the intervals on which it moves in each direction.
Show answer and explanation

Answer: C · Worked explanation

Differentiating gives v(t)=3t2−6t=3t(t−2)v(t)=3t^2-6t=3t(t-2)v(t)=3t2−6t=3t(t−2), which is zero at t=0t=0t=0 and t=2t=2t=2. Velocity is negative for 0<t<20<t<20<t<2 and positive for 2<t≤42<t\leq42<t≤4, so the object moves in the negative direction and then the positive direction.

Keep going

Next topic4.3 Rates of change in applied contextsPrevious topic4.1 Derivatives in context

More in Unit 4 · Contextual Applications of Differentiation

  1. 4.1Derivatives in contextNotes · 10 questions
  2. 4.2Straight-line motionNotes · 10 questions
  3. 4.3Rates of change in applied contextsNotes · 10 questions
  4. 4.4Introduction to related ratesNotes · 9 questions
  5. 4.5Solving related rates problemsNotes · 10 questions
  6. 4.6Local linearity and linearizationNotes · 10 questions
  7. 4.7L'Hospital's ruleNotes · 10 questions

All AP Calculus AB topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Position records location along a chosen line
  2. 2Velocity and acceleration describe changes in motion
  3. 3The sign of velocity reveals direction and rest
  4. 4Motion graphs connect slopes, signs, and turning points
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe