Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus AB
  3. ›4 Contextual Applications of Differentiation
  4. ›4.3 Rates of change in applied contexts

AP Calculus AB · Unit 4 · Contextual Applications of Differentiation

4.3 Rates of change in applied contexts

Calculate average and instantaneous rates of change, and interpret derivatives in applied problems.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Average rates describe change across an interval
  1. 1Average rates describe change across an interval
  2. 2Derivatives give rates at a particular input
  3. 3A quantity model turns a context into a rate
  4. 4A rate’s sign and units complete its meaning
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Average rates describe change across an interval

An average rate of change compares the change in an output with the change in its input. If Q(t)Q(t)Q(t) is a quantity measured over time, its average rate from t=at=at=a to t=bt=bt=b is Q(b)−Q(a)b−a\frac{Q(b)-Q(a)}{b-a}b−aQ(b)−Q(a)​. The result describes the whole interval, not necessarily any particular moment. For example, a tank gaining 20 liters over 4 minutes has an average volume change of 5 liters per minute. Its volume need not increase steadily during those minutes.

The secant slope on a graph gives the same rate. It connects the points at the interval’s endpoints. State both the units and the interval when interpreting an average rate.

Key terms · tap one for its definition

average rate of change

The change in a function’s output divided by the change in its input across an interval.

secant slope

The slope of the line through two points on a graph.

Part 1 done

2

Part 2 of 4: Derivatives give rates at a particular input

An instantaneous rate of change describes how quickly a quantity changes at one input value. For a differentiable function Q(t)Q(t)Q(t), this rate is the derivative Q′(t)Q'(t)Q′(t). It is the limit of average rates over intervals that shrink toward that input. On a graph, it is the tangent line’s slope.

A positive derivative means the quantity is increasing locally. A negative derivative means it is decreasing locally. A zero derivative means the graph has a horizontal tangent, but the quantity may still change nearby. Always attach the output units per input unit. If volume is in liters and time is in minutes, Q′(t)Q'(t)Q′(t) has units of liters per minute.

Common mistake

A derivative’s value is not the amount present. It tells how quickly that amount changes.

Key terms · tap one for its definition

instantaneous rate of change

The rate at one input value, given by the derivative when it exists.

derivative

The limit of average rates of change as the input interval approaches zero.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the expression that gives the average rate of change of a quantity P(x)P(x)P(x) from x=2x=2x=2 to x=7x=7x=7.
Show answer and explanation

Answer: A · Worked explanation

The average rate of change is the change in the output divided by the change in the input, so it is [P(7)−P(2)]/(7−2)[P(7)-P(2)]/(7-2)[P(7)−P(2)]/(7−2). The tempting expression using the sum of the endpoint outputs does not measure the change in the quantity; subtracting derivative values instead compares rates, not the quantity’s average rate over the interval.
3

Part 3 of 4: A quantity model turns a context into a rate

Start by identifying the changing quantity and its input. Write a quantity model with units and a valid domain. Then choose an endpoint calculation for an average rate or differentiate for a rate at one input. Evaluate only after choosing the correct rate. This order helps keep a quantity, such as volume, separate from its rate of change.

Worked example

Rates of water volume

A tank’s water volume is V(t)=100+12t−t2V(t)=100+12t-t^2V(t)=100+12t−t2 liters, where ttt is minutes and 0≤t≤60\leq t\leq60≤t≤6. Find the average rate from 0 to 4 minutes and the instantaneous rate at 4 minutes.
  1. 1
    V(0)=100V(0)=100V(0)=100 liters and V(4)=100+12(4)−42=132V(4)=100+12(4)-4^2=132V(4)=100+12(4)−42=132 liters.
  2. 2
    Average rate: V(4)−V(0)4−0=132−1004=8\frac{V(4)-V(0)}{4-0}=\frac{132-100}{4}=84−0V(4)−V(0)​=4132−100​=8 liters per minute.
  3. 3
    Differentiate: V′(t)=12−2tV'(t)=12-2tV′(t)=12−2t liters per minute.
  4. 4
    Evaluate: V′(4)=12−2(4)=4V'(4)=12-2(4)=4V′(4)=12−2(4)=4 liters per minute.

Answer: The average rate is 8 liters per minute; the instantaneous rate at 4 minutes is 4 liters per minute.

Figure 1. The secant shows change across an interval. The tangent shows change at one time.

Key term

quantity model

A function that represents a measured or counted quantity in terms of an input.

Part 3 done

4

Part 4 of 4: A rate’s sign and units complete its meaning

Interpret a rate by naming the quantity, its direction, and the input value or interval. A positive rate means the quantity increases as the input increases. A negative rate means it decreases. For the tank, V′(4)=4V'(4)=4V′(4)=4 liters per minute means its water volume is increasing at 4 minutes. It does not mean the tank contains 4 liters.

The input need not be time. If cost C(q)C(q)C(q) is measured in dollars and qqq counts items, then C′(q)C'(q)C′(q) has units of dollars per item. Its value describes the cost’s instantaneous change as production increases. Check that your stated units match the quantity divided by the input.

Exam tip

For an interpretation, name the quantity, say whether it increases or decreases, and include units and the relevant input.

Key terms · tap one for its definition

positive rate

A rate indicating that a quantity increases as its input increases.

negative rate

A rate indicating that a quantity decreases as its input increases.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Calculate[2 marks]

    Calculate the average rate of change of a tank’s volume from 0 to 4 minutes if its volume rises from 100 to 132 liters.

    Show mark schemeHide mark scheme

    Model answer

    132−1004−0=8\frac{132-100}{4-0}=84−0132−100​=8 liters per minute.

    • 1 mark for forming the change in volume divided by the change in time
    • 1 mark for obtaining 8 liters per minute
  2. 2.Calculate[3 marks]

    Calculate the instantaneous rate at 4 minutes for V(t)=100+12t−t2V(t)=100+12t-t^2V(t)=100+12t−t2 liters, where ttt is measured in minutes.

    Show mark schemeHide mark scheme

    Model answer

    V′(t)=12−2tV'(t)=12-2tV′(t)=12−2t, so V′(4)=12−8=4V'(4)=12-8=4V′(4)=12−8=4 liters per minute.

    • 1 mark for differentiating to obtain V′(t)=12−2tV'(t)=12-2tV′(t)=12−2t
    • 1 mark for substituting t=4t=4t=4 into the derivative
    • 1 mark for giving 4 liters per minute
  3. 3.Explain[3 marks]

    Explain the difference between an average rate over an interval and an instantaneous rate at one input.

    Show mark schemeHide mark scheme

    Model answer

    An average rate divides the change in output by the change in input across an interval. An instantaneous rate is the derivative at one input. On a graph, these are secant and tangent slopes, respectively.

    • 1 mark for describing an average rate as output change divided by input change across an interval
    • 1 mark for identifying an instantaneous rate as the derivative at one input
    • 1 mark for linking average and instantaneous rates to secant and tangent slopes, respectively
  4. 4.Interpret[3 marks]

    Interpret C′(50)=−3C'(50)=-3C′(50)=−3 when C(q)C(q)C(q) is a cost in dollars and qqq is a number of items.

    Show mark schemeHide mark scheme

    Model answer

    At 50 items, cost is decreasing at an instantaneous rate of 3 dollars per additional item.

    • 1 mark for identifying 50 items as the input where the rate applies
    • 1 mark for stating that cost is decreasing
    • 1 mark for giving the rate as 3 dollars per item
  5. 5.Describe[2 marks]

    Describe how to find a rate at a specified input when given a differentiable quantity model.

    Show mark schemeHide mark scheme

    Model answer

    Differentiate the quantity model, then evaluate its derivative at the specified input.

    • 1 mark for differentiating the quantity model
    • 1 mark for evaluating the derivative at the specified input

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A differentiable function H(t)H(t)H(t) measures the height of a plant in centimeters after ttt days. Which quantity gives the plant’s instantaneous growth rate at day 6?
Show answer and explanation

Answer: B · Worked explanation

The derivative evaluated at day 6 gives the instantaneous rate of change of height at that time. Its units are centimeters per day because height is measured in centimeters and the input in days; H(6)H(6)H(6) is the height itself, not its growth rate.
3.

Easy·Interpret[1 mark]

At a particular production level, a cost model has derivative C′(q)=2.4C'(q)=2.4C′(q)=2.4, where cost is measured in dollars and qqq is the number of items. Interpret this value.
Show answer and explanation

Answer: A · Worked explanation

The positive derivative means cost is increasing locally, and its units are dollars per item. The value describes the cost’s instantaneous change near the specified production level, not the total cost; it also does not guarantee the same exact increase for every item at all production levels.
4.

Easy·Identify[1 mark]

Which statement correctly describes the relationship between a derivative and a graph of a quantity model?
Show answer and explanation

Answer: D · Worked explanation

For a differentiable quantity model, the derivative at an input is the slope of the tangent line at that input. The output value gives the quantity itself, while the slope of a secant through two endpoints represents an average rate over an interval rather than an instantaneous rate.
5.

Medium·Calculate[2 marks]

A delivery service records the number of packages sorted, N(h)N(h)N(h), after hhh hours. The count rises from 420 packages at hour 3 to 570 packages at hour 8. Calculate the average rate of change over this interval.
Show answer and explanation

Answer: D · Worked explanation

The number of packages increases by 570−420=150570-420=150570−420=150 over 8−3=58-3=58−3=5 hours, so the average rate is 150/5=30150/5=30150/5=30 packages per hour. The tempting value of 150 packages is the total change in the interval, not a rate; a rate must also account for the five-hour input change.
6.

Medium·Calculate[2 marks]

A sensor’s temperature is modeled by T(t)=18+5t−0.5t2T(t)=18+5t-0.5t^2T(t)=18+5t−0.5t2 degrees Celsius, where ttt is measured in minutes. Calculate the instantaneous rate of temperature change at t=3t=3t=3.
Show answer and explanation

Answer: D · Worked explanation

Differentiate the model to get T′(t)=5−tT'(t)=5-tT′(t)=5−t, then evaluate at t=3t=3t=3: T′(3)=5−3=2T'(3)=5-3=2T′(3)=5−3=2 degrees Celsius per minute. The value T(3)=28.5T(3)=28.5T(3)=28.5 is the temperature at that time, not its rate of change, which is the most tempting quantity-rate mix-up.
7.

Medium·Interpret[2 marks]

A lake’s water level L(t)L(t)L(t) is measured in meters, and ttt is measured in hours. At t=10t=10t=10, L′(10)=−0.08L'(10)=-0.08L′(10)=−0.08. Which interpretation is appropriate?
Show answer and explanation

Answer: D · Worked explanation

The negative derivative indicates that the water level is decreasing at the specified input, and the units are meters per hour. The value is not the water level itself, and it does not describe an average over the first ten hours because it is an instantaneous rate at hour 10.
8.

Medium·Determine[2 marks]

The number of visitors to a website is modeled by V(t)=200+30t+2t2V(t)=200+30t+2t^2V(t)=200+30t+2t2, where ttt is measured in days and 0≤t≤50\leq t\leq 50≤t≤5. Determine the instantaneous rate at which visitors are being added on day 4.
Show answer and explanation

Answer: B · Worked explanation

Differentiate to obtain V′(t)=30+4tV'(t)=30+4tV′(t)=30+4t, then substitute t=4t=4t=4 to get V′(4)=46V'(4)=46V′(4)=46 visitors per day. The model value V(4)=352V(4)=352V(4)=352 is the number of visitors, not the rate at which the number is changing.
9.

Medium·Calculate[2 marks]

A machine’s output M(t)M(t)M(t), in kilograms, is differentiable with M′(t)=12−3tM'(t)=12-3tM′(t)=12−3t kilograms per minute. Calculate the machine’s rate of output change at t=2t=2t=2 minutes.
Show answer and explanation

Answer: D · Worked explanation

Substitute the input into the given derivative: M′(2)=12−3(2)=6M'(2)=12-3(2)=6M′(2)=12−3(2)=6 kilograms per minute. The value 6 is a rate, not a quantity of output, and using 12 alone would ignore the change represented by the −3t-3t−3t term at two minutes.
10.

Hard·Deduce[2 marks]

A medication concentration A(t)A(t)A(t) is measured in milligrams per liter, where ttt is in hours. A model gives A(2)=14A(2)=14A(2)=14, A(5)=11A(5)=11A(5)=11, and A′(5)=2A'(5)=2A′(5)=2. Which conclusion follows?
Show answer and explanation

Answer: A · Worked explanation

The average rate from hour 2 to hour 5 is (11−14)/(5−2)=−1(11-14)/(5-2)=-1(11−14)/(5−2)=−1 milligram per liter per hour, while the derivative at hour 5 is positive 2 milligrams per liter per hour. Thus the concentration decreased on average over the interval but is increasing locally at hour 5; an interval average does not determine the rate at its endpoint.

Keep going

Next topic4.4 Introduction to related ratesPrevious topic4.2 Straight-line motion

More in Unit 4 · Contextual Applications of Differentiation

  1. 4.1Derivatives in contextNotes · 10 questions
  2. 4.2Straight-line motionNotes · 10 questions
  3. 4.3Rates of change in applied contextsNotes · 10 questions
  4. 4.4Introduction to related ratesNotes · 9 questions
  5. 4.5Solving related rates problemsNotes · 10 questions
  6. 4.6Local linearity and linearizationNotes · 10 questions
  7. 4.7L'Hospital's ruleNotes · 10 questions

All AP Calculus AB topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Average rates describe change across an interval
  2. 2Derivatives give rates at a particular input
  3. 3A quantity model turns a context into a rate
  4. 4A rate’s sign and units complete its meaning
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Average and instantaneous tank rates

Volume (liters)0123456100110120130140Time (minutes)
  • Volume
  • secant
  • tangent
  • (0, 100)
  • (4, 132)