Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus AB
  3. ›8 Applications of Integration
  4. ›8.12 Washer method about other axes

AP Calculus AB · Unit 8 · Applications of Integration

8.12 Washer method about other axes

Set up and evaluate washer integrals when rotating a region around a shifted horizontal or vertical axis.

  • 2 min read
  • 4 parts
  • 9 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 9 questions
1/4Each radius is a distance from the rotation axis
  1. 1Each radius is a distance from the rotation axis
  2. 2Horizontal axes require vertical distances to both curves
  3. 3A shifted horizontal axis changes both radii
  4. 4Vertical axes require horizontal slices and horizontal distances
  5. Check your recall
  6. Practice: 9 questions
1

Part 1 of 4: Each radius is a distance from the rotation axis

A washer is a cross section with a circular hole. Its area is π(R2−r2)\pi(R^2-r^2)π(R2−r2), where RRR is the outer radius and rrr is the inner radius. Measure both radii from the rotation axis, not from a coordinate axis. A horizontal rotation axis uses vertical slices and an integral with respect to xxx. A vertical rotation axis uses horizontal slices and an integral with respect to yyy. In either case, the slices must be perpendicular to the rotation axis.

Common mistake

Do not use a curve's height as its radius unless the rotation axis is the x-axis.

Key terms · tap one for its definition

washer

A washer is a circular cross section with an outer radius and an inner radius.

outer radius

The outer radius is the distance from the rotation axis to the farther boundary of a cross section.

Part 1 done

2

Part 2 of 4: Horizontal axes require vertical distances to both curves

For rotation around y=ky=ky=k, each radius is the vertical distance between y=ky=ky=k and a boundary curve. If the axis lies above the region, the lower curve gives RRR and the upper curve gives rrr. If it lies below, the upper curve gives RRR. Over a≤x≤ba\leq x\leq ba≤x≤b, the volume is V=π∫ab(R(x)2−r(x)2) dxV=\pi\int_a^b(R(x)^2-r(x)^2)\,dxV=π∫ab​(R(x)2−r(x)2)dx. Check which curve is farther from the axis before substituting.

Figure 1. Both radii begin at the rotation axis. The farther boundary forms the outer edge of the washer.

Key term

radius

A radius is the perpendicular distance from the rotation axis to a boundary of the region.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the slice direction and integration variable for the washer method when a region is rotated around the horizontal line y=−1y=-1y=−1.
Show answer and explanation

Answer: B · Worked explanation

A slice perpendicular to a horizontal rotation axis is vertical, so the washer integral is taken with respect to xxx. Horizontal slices would be parallel to the axis and would produce cylindrical shells rather than washers.
3

Part 3 of 4: A shifted horizontal axis changes both radii

Consider the region between y=xy=xy=x and y=x2y=x^2y=x2 for 0≤x≤10\leq x\leq10≤x≤1, rotated around y=2y=2y=2. The axis is above the entire region. The lower curve, y=x2y=x^2y=x2, is farther from it. Thus R=2−x2R=2-x^2R=2−x2 and r=2−xr=2-xr=2−x. Square each complete distance before subtracting.

Worked example

Volume around y = 2

Find the volume formed by rotating this region around y=2y=2y=2.
  1. 1
    V=π∫01[(2−x2)2−(2−x)2] dxV=\pi\int_0^1\big[(2-x^2)^2-(2-x)^2\big] \,dxV=π∫01​[(2−x2)2−(2−x)2]dx.
  2. 2
    V=π∫01(x4−5x2+4x) dxV=\pi\int_0^1(x^4-5x^2+4x)\,dxV=π∫01​(x4−5x2+4x)dx.
  3. 3
    V=π[x55−5x33+2x2]01V=\pi\left[\frac{x^5}{5}-\frac{5x^3}{3}+2x^2\right]_0^1V=π[5x5​−35x3​+2x2]01​.
  4. 4
    V=π(15−53+2)=8π15V=\pi\left(\frac15-\frac53+2\right)=\frac{8\pi}{15}V=π(51​−35​+2)=158π​.

Answer: 8π15\frac{8\pi}{15}158π​ cubic units

Part 3 done

4

Part 4 of 4: Vertical axes require horizontal slices and horizontal distances

For rotation around x=hx=hx=h, write the boundaries as xxx in terms of yyy. Each radius is a horizontal distance from x=hx=hx=h. If the axis lies to the right, the left boundary gives RRR and the right boundary gives rrr. Integrate π(R(y)2−r(y)2)\pi(R(y)^2-r(y)^2)π(R(y)2−r(y)2) over the region's yyy-values. For the same region, x=yx=yx=y is left of x=yx=\sqrt yx=y​ when 0<y<10<y<10<y<1. Rotating around x=2x=2x=2 therefore gives V=π∫01[(2−y)2−(2−y)2] dyV=\pi\int_0^1\big[(2-y)^2-(2-\sqrt y)^2\big] \,dyV=π∫01​[(2−y)2−(2−y​)2]dy.

Exam tip

State the slice direction, both distances, and the bounds before evaluating a washer integral.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State the direction of slices used for rotation around a horizontal line.

    Show mark schemeHide mark scheme

    Model answer

    Use vertical slices.

    • 1 mark for stating that the slices are vertical
  2. 2.Explain[3 marks]

    Explain how to choose both radii when rotating a region below y=cy=cy=c.

    Show mark schemeHide mark scheme

    Model answer

    Measure both radii vertically from y=cy=cy=c. The lower curve gives the outer radius because it is farther away. The upper curve gives the inner radius.

    • 1 mark for measuring both distances from y=cy=cy=c
    • 1 mark for identifying the lower curve as the outer radius
    • 1 mark for identifying the upper curve as the inner radius
  3. 3.Calculate[4 marks]

    Calculate the volume formed by rotating the region between y=xy=xy=x and y=x2y=x^2y=x2, for 0≤x≤10\leq x\leq10≤x≤1, around y=2y=2y=2.

    Show mark schemeHide mark scheme

    Model answer

    R=2−x2R=2-x^2R=2−x2 and r=2−xr=2-xr=2−x, so V=π∫01[(2−x2)2−(2−x)2] dx=π[x55−5x33+2x2]01=8π15V=\pi\int_0^1[(2-x^2)^2-(2-x)^2] \,dx=\pi[\frac{x^5}{5}-\frac{5x^3}{3}+2x^2]_0^1=\frac{8\pi}{15}V=π∫01​[(2−x2)2−(2−x)2]dx=π[5x5​−35x3​+2x2]01​=158π​ cubic units.

    • 1 mark for identifying R=2−x2R=2-x^2R=2−x2 and r=2−xr=2-xr=2−x
    • 1 mark for setting up π∫01[(2−x2)2−(2−x)2] dx\pi\int_0^1[(2-x^2)^2-(2-x)^2] \,dxπ∫01​[(2−x2)2−(2−x)2]dx
    • 1 mark for finding an antiderivative of x4−5x2+4xx^4-5x^2+4xx4−5x2+4x
    • 1 mark for obtaining 8π15\frac{8\pi}{15}158π​ cubic units
  4. 4.Construct[3 marks]

    Construct a washer integral for the same region rotated around x=2x=2x=2.

    Show mark schemeHide mark scheme

    Model answer

    Horizontal slices give R=2−yR=2-yR=2−y and r=2−yr=2-\sqrt yr=2−y​. Thus V=π∫01[(2−y)2−(2−y)2] dyV=\pi\int_0^1[(2-y)^2-(2-\sqrt y)^2] \,dyV=π∫01​[(2−y)2−(2−y​)2]dy.

    • 1 mark for using horizontal slices with 0≤y≤10\leq y\leq10≤y≤1
    • 1 mark for identifying R=2−yR=2-yR=2−y and r=2−yr=2-\sqrt yr=2−y​
    • 1 mark for writing π∫01[(2−y)2−(2−y)2] dy\pi\int_0^1[(2-y)^2-(2-\sqrt y)^2] \,dyπ∫01​[(2−y)2−(2−y​)2]dy
  5. 5.Explain[2 marks]

    Explain why R2−r2R^2-r^2R2−r2 gives the area factor for a washer.

    Show mark schemeHide mark scheme

    Model answer

    The washer is a large circular disk with a smaller disk removed. Subtracting their areas gives π(R2−r2)\pi(R^2-r^2)π(R2−r2).

    • 1 mark for describing the washer as an outer disk minus an inner disk
    • 1 mark for giving the resulting area as π(R2−r2)\pi(R^2-r^2)π(R2−r2)

Practice this topic

9 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 9 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A region lies between y=1y=1y=1 and y=4y=4y=4, and it is rotated around y=6y=6y=6. Which expressions give the outer radius RRR and inner radius rrr?
Show answer and explanation

Answer: C · Worked explanation

Both radii are vertical distances measured from the axis y=6y=6y=6. The farther boundary is y=1y=1y=1, so R=6−1R=6-1R=6−1, while the nearer boundary is y=4y=4y=4, so r=6−4r=6-4r=6−4. The tempting choice that reverses the radii assigns the nearer boundary as the outer radius.
3.

Easy·Identify[1 mark]

A region is rotated around the vertical line x=5x=5x=5. At a fixed height yyy, its left boundary is x=1x=1x=1 and its right boundary is x=3x=3x=3. Identify the outer and inner radii.
Show answer and explanation

Answer: A · Worked explanation

For a vertical axis, radii are horizontal distances from that axis. Since x=5x=5x=5 is to the right of the region, the left boundary is farther away and gives R=5−1R=5-1R=5−1, while the right boundary gives r=5−3r=5-3r=5−3. The tempting reversed assignment would make the inner radius larger than the outer radius.
4.

Medium·Determine[2 marks]

The region between y=2y=2y=2 and y=5y=5y=5 for 0≤x≤20\leq x\leq 20≤x≤2 is rotated around y=0y=0y=0. Determine the washer integral for its volume.
Show answer and explanation

Answer: C · Worked explanation

The axis is below the region, so the upper boundary y=5y=5y=5 is farther away and gives R=5R=5R=5; the lower boundary gives r=2r=2r=2. Vertical slices and the interval 0≤x≤20\leq x\leq20≤x≤2 give V=π∫02(52−22) dxV=\pi\int_0^2(5^2-2^2)\,dxV=π∫02​(52−22)dx. The tempting expression using 5−25-25−2 treats the region's height as a radius instead of measuring from the axis.
5.

Medium·Determine[2 marks]

For 0≤x≤10\leq x\leq10≤x≤1, the region between y=x2y=x^2y=x2 and y=2xy=2xy=2x is rotated around y=3y=3y=3. Determine the outer and inner radius functions.
Show answer and explanation

Answer: A · Worked explanation

The axis is above both curves, and on this interval x2≤2xx^2\leq2xx2≤2x, so y=x2y=x^2y=x2 is farther from y=3y=3y=3. Therefore R=3−x2R=3-x^2R=3−x2 and r=3−2xr=3-2xr=3−2x. The tempting reversal mistakes the upper curve for the outer boundary even though it is closer to the axis above the region.
6.

Medium·Calculate[2 marks]

The region bounded by y=1y=1y=1, y=3y=3y=3, and x=0x=0x=0 is rotated around x=4x=4x=4. At height yyy, the region extends from x=0x=0x=0 to x=y−1x=y-1x=y−1. Calculate the volume.
Show answer and explanation

Answer: A · Worked explanation

The axis lies to the right, so R=4R=4R=4 and r=4−(y−1)=5−yr=4-(y-1)=5-yr=4−(y−1)=5−y. Thus V=π∫13[16−(5−y)2]dy=40π3V=\pi\int_1^3[16-(5-y)^2]dy=\frac{40\pi}{3}V=π∫13​[16−(5−y)2]dy=340π​ cubic units.
7.

Medium·Evaluate[2 marks]

A region between y=0y=0y=0 and y=xy=\sqrt{x}y=x​ for 0≤x≤40\leq x\leq40≤x≤4 is rotated around y=−1y=-1y=−1. Evaluate the washer integral for its volume.
Show answer and explanation

Answer: A · Worked explanation

The axis is below the region, so R=1+xR=1+\sqrt{x}R=1+x​ and r=1r=1r=1. Hence V=π∫04[(1+x)2−1]dx=π∫04(x+2x)dx=π(8+32/3)=56π3V=\pi\int_0^4[(1+\sqrt{x})^2-1]dx=\pi\int_0^4(x+2\sqrt{x})dx=\pi(8+32/3)=\frac{56\pi}{3}V=π∫04​[(1+x​)2−1]dx=π∫04​(x+2x​)dx=π(8+32/3)=356π​.
8.

Hard·Calculate[2 marks]

The region between y=0y=0y=0 and y=xy=xy=x for 0≤x≤20\leq x\leq20≤x≤2 is rotated around y=2y=2y=2. Calculate the volume.
Show answer and explanation

Answer: B · Worked explanation

The region lies below the axis, so R=2R=2R=2 and r=2−xr=2-xr=2−x. Then V=π∫02[4−(2−x)2]dx=π[2x2−x3/3]02=16π3V=\pi\int_0^2[4-(2-x)^2]dx=\pi[2x^2-x^3/3]_0^2=\frac{16\pi}{3}V=π∫02​[4−(2−x)2]dx=π[2x2−x3/3]02​=316π​.
9.

Hard·Calculate[2 marks]

A region is bounded by y=0y=0y=0, x=0x=0x=0, and x=yx=\sqrt{y}x=y​ for 0≤y≤10\leq y\leq10≤y≤1. It is rotated around x=2x=2x=2. Calculate the volume.
Show answer and explanation

Answer: A · Worked explanation

Use horizontal slices, with R=2R=2R=2 and r=2−yr=2-\sqrt{y}r=2−y​. Then V=π∫01[4−(2−y)2]dy=π∫01(4y−y)dy=π(8/3−1/2)=13π6V=\pi\int_0^1[4-(2-\sqrt{y})^2]dy=\pi\int_0^1(4\sqrt{y}-y)dy=\pi(8/3-1/2)=\frac{13\pi}{6}V=π∫01​[4−(2−y​)2]dy=π∫01​(4y​−y)dy=π(8/3−1/2)=613π​.

Keep going

Previous topic8.11 Washer method about the x- or y-axis

More in Unit 8 · Applications of Integration

  1. 8.4Area between curves (functions of x)Notes · 10 questions
  2. 8.5Area between curves (functions of y)Notes · 9 questions
  3. 8.6Area between curves with several intersectionsNotes · 10 questions
  4. 8.7Volumes: square and rectangle cross sectionsNotes · 10 questions
  5. 8.8Volumes: triangle and semicircle cross sectionsNotes · 10 questions
  6. 8.9Disc method about the x- or y-axisNotes · 10 questions
  7. 8.10Disc method about other axesNotes · 9 questions
  8. 8.11Washer method about the x- or y-axisNotes · 10 questions
  9. 8.12Washer method about other axesNotes · 9 questions

All AP Calculus AB topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Each radius is a distance from the rotation axis
  2. 2Horizontal axes require vertical distances to both curves
  3. 3A shifted horizontal axis changes both radii
  4. 4Vertical axes require horizontal slices and horizontal distances
  5. Check your recall
  6. Practice: 9 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe