Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus AB
  3. ›8 Applications of Integration
  4. ›8.6 Area between curves with several intersections

AP Calculus AB · Unit 8 · Applications of Integration

8.6 Area between curves with several intersections

Find every intersection, split the area where curve order changes, and add the resulting areas.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Intersections divide the region into smaller sections
  1. 1Intersections divide the region into smaller sections
  2. 2Check which curve is higher on each interval
  3. 3Each section needs its own nonnegative area integral
  4. 4Add the section areas to obtain total area
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Intersections divide the region into smaller sections

Start by finding every intersection point in the region. Set the two function expressions equal, then solve for all relevant values of xxx. These values become split points for the area calculation. For example, x3=xx^3=xx3=x gives x3−x=0x^3-x=0x3−x=0, or x(x−1)(x+1)=0x(x-1)(x+1)=0x(x−1)(x+1)=0. The curves meet at x=−1x=-1x=−1, x=0x=0x=0, and x=1x=1x=1. These values divide the enclosed area into two sections. Do not stop after finding the outer intersections. An intersection inside the region may change which curve is above the other.

Common mistake

The outer intersections are not always enough. Check for intersections between them before setting up the area integrals.

Key terms · tap one for its definition

intersection point

An intersection point is a point where two curves have the same coordinates.

split points

Split points are intersection values used as boundaries between area integrals.

Part 1 done

2

Part 2 of 4: Check which curve is higher on each interval

Between consecutive intersections, test an xxx-value to identify the top curve and bottom curve. For y=x3y=x^3y=x3 and y=xy=xy=x, use x=−12x=-\frac12x=−21​ on the left interval. Since −18>−12-\frac18>-\frac12−81​>−21​, x3x^3x3 is above xxx there. On the right interval, use x=12x=\frac12x=21​. Since 12>18\frac12>\frac1821​>81​, xxx is above x3x^3x3. The curves switch order at x=0x=0x=0, so one top-minus-bottom expression cannot describe both sections. A sketch helps you check the order, but the test values establish it.

Figure 1. The curves switch order at the middle intersection. Each shaded section needs its own top-minus-bottom integral.

Key terms · tap one for its definition

top curve

The top curve has the greater y-value throughout the interval being considered.

bottom curve

The bottom curve has the smaller y-value throughout the interval being considered.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify all xxx-coordinates where the curves y=x3y=x^3y=x3 and y=9xy=9xy=9x intersect.
Show answer and explanation

Answer: A · Worked explanation

At an intersection, the yyy-values are equal, so solve x3=9xx^3=9xx3=9x. Factoring gives x(x2−9)=x(x−3)(x+3)=0x(x^2-9)=x(x-3)(x+3)=0x(x2−9)=x(x−3)(x+3)=0, which has roots -3, 0, and 3. The pair -3 and 3 alone misses the intersection at the origin.
3

Part 3 of 4: Each section needs its own nonnegative area integral

Write a separate integral between each pair of consecutive intersections. On each interval, subtract the bottom function from the top function. This makes the integrand nonnegative throughout that section. For the curves y=x3y=x^3y=x3 and y=xy=xy=x, the two areas are ∫−10(x3−x) dx\int_{-1}^{0}(x^3-x)\,dx∫−10​(x3−x)dx and ∫01(x−x3) dx\int_{0}^{1}(x-x^3)\,dx∫01​(x−x3)dx. Their limits come directly from the intersection values. If several intersections occur, repeat this check on every interval. Never assume the curves alternate order without testing or otherwise establishing their positions.

Exam tip

Show the limits and top-minus-bottom expression for each section. This makes every change in curve order clear.

Key term

separate integral

A separate integral calculates area over one interval with a fixed top-minus-bottom order.

Part 3 done

4

Part 4 of 4: Add the section areas to obtain total area

The total area is the sum of the nonnegative section areas. A single integral of the same difference across the whole region may cancel positive and negative contributions. That result is signed accumulation, not the area enclosed between the curves. Keep the sections separate until you have checked their curve order. Then evaluate each integral and add the results. For y=x3y=x^3y=x3 and y=xy=xy=x, the two sections have equal area. This symmetry is a check, not a required method. Report area in square units when the axes use length units.

Worked example

Area enclosed by a line and a cubic

Find the total area enclosed by y=xy=xy=x and y=x3y=x^3y=x3. Both axes measure length in centimeters.
  1. 1
    Solve x=x3x=x^3x=x3: x(x−1)(x+1)=0x(x-1)(x+1)=0x(x−1)(x+1)=0, so x=−1,0,1x=-1,0,1x=−1,0,1.
  2. 2
    The top curve is x3x^3x3 on [−1,0][-1,0][−1,0] and xxx on [0,1][0,1][0,1].
  3. 3
    Left area: ∫−10(x3−x) dx=[x44−x22]−10=14\int_{-1}^{0}(x^3-x)\,dx=\left[\frac{x^4}{4}-\frac{x^2}{2}\right]_{-1}^{0}=\frac14∫−10​(x3−x)dx=[4x4​−2x2​]−10​=41​.
  4. 4
    Right area: ∫01(x−x3) dx=[x22−x44]01=14\int_{0}^{1}(x-x^3)\,dx=\left[\frac{x^2}{2}-\frac{x^4}{4}\right]_{0}^{1}=\frac14∫01​(x−x3)dx=[2x2​−4x4​]01​=41​.
  5. 5
    Add the areas: 14+14=12\frac14+\frac14=\frac1241​+41​=21​.

Answer: The total enclosed area is 12 cm2\frac12\,\mathrm{cm^2}21​cm2.

Key term

total area

Total area is the sum of the nonnegative areas of all sections between the curves.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Find[2 marks]

    Find all intersection values of y=x3y=x^3y=x3 and y=xy=xy=x.

    Show mark schemeHide mark scheme

    Model answer

    Set x3=xx^3=xx3=x, then factor x(x−1)(x+1)=0x(x-1)(x+1)=0x(x−1)(x+1)=0. The intersection values are x=−1,0,1x=-1,0,1x=−1,0,1.

    • 1 mark for setting x3=xx^3=xx3=x and factoring to obtain x(x−1)(x+1)=0x(x-1)(x+1)=0x(x−1)(x+1)=0
    • 1 mark for finding all three values x=−1,0,1x=-1,0,1x=−1,0,1
  2. 2.Determine[2 marks]

    Determine the top curve on each interval between those intersections.

    Show mark schemeHide mark scheme

    Model answer

    y=x3y=x^3y=x3 is on top for −1<x<0-1<x<0−1<x<0. y=xy=xy=x is on top for 0<x<10<x<10<x<1.

    • 1 mark for identifying y=x3y=x^3y=x3 as the top curve on (−1,0)(-1,0)(−1,0)
    • 1 mark for identifying y=xy=xy=x as the top curve on (0,1)(0,1)(0,1)
  3. 3.Write[3 marks]

    Write separate integrals for the total area enclosed by y=x3y=x^3y=x3 and y=xy=xy=x.

    Show mark schemeHide mark scheme

    Model answer

    A=∫−10(x3−x) dx+∫01(x−x3) dxA=\int_{-1}^{0}(x^3-x)\,dx+\int_{0}^{1}(x-x^3)\,dxA=∫−10​(x3−x)dx+∫01​(x−x3)dx.

    • 1 mark for using the intervals [−1,0][-1,0][−1,0] and [0,1][0,1][0,1]
    • 1 mark for using x3−xx^3-xx3−x on the left interval
    • 1 mark for using x−x3x-x^3x−x3 on the right interval and adding the integrals
  4. 4.Calculate[4 marks]

    Calculate the area enclosed by y=x3y=x^3y=x3 and y=xy=xy=x when both axes measure centimeters.

    Show mark schemeHide mark scheme

    Model answer

    A=∫−10(x3−x) dx+∫01(x−x3) dx=14+14=12 cm2A=\int_{-1}^{0}(x^3-x)\,dx+\int_{0}^{1}(x-x^3)\,dx=\frac14+\frac14=\frac12\,\mathrm{cm^2}A=∫−10​(x3−x)dx+∫01​(x−x3)dx=41​+41​=21​cm2.

    • 1 mark for setting up both integrals with the correct limits
    • 1 mark for using top minus bottom on both intervals
    • 1 mark for evaluating each integral as 14\frac1441​
    • 1 mark for adding the areas to obtain 12 cm2\frac12\,\mathrm{cm^2}21​cm2
  5. 5.Explain[2 marks]

    Explain why one integral of x−x3x-x^3x−x3 from -1 to 1 does not give the enclosed area.

    Show mark schemeHide mark scheme

    Model answer

    x−x3x-x^3x−x3 is negative on (−1,0)(-1,0)(−1,0) and positive on (0,1)(0,1)(0,1). The contributions cancel, while area requires adding two nonnegative sections.

    • 1 mark for stating that x−x3x-x^3x−x3 changes sign at x=0x=0x=0
    • 1 mark for explaining that signed contributions cancel instead of adding as areas

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

The curves y=x2−1y=x^2-1y=x2−1 and y=0y=0y=0 enclose regions. Which set gives all the xxx-coordinates of their intersection points?
Show answer and explanation

Answer: B · Worked explanation

Set the expressions equal: x2−1=0x^2-1=0x2−1=0, so (x−1)(x+1)=0(x-1)(x+1)=0(x−1)(x+1)=0. The curves intersect at x=−1x=-1x=−1 and x=1x=1x=1, and these values bound the enclosed region. The values 0 and 1 do not both satisfy the intersection equation.
3.

Easy·State[1 mark]

On an interval between consecutive intersection points, a test value shows that curve fff has a greater yyy-value than curve ggg. State the expression to use as the integrand for the area on that interval.
Show answer and explanation

Answer: C · Worked explanation

The top curve has the greater yyy-value, so subtract the bottom curve from the top: f(x)−g(x)f(x)-g(x)f(x)−g(x). This gives a nonnegative integrand throughout the interval. Reversing the subtraction would give a negative value there, while adding the functions or subtracting their derivatives does not represent vertical distance between the curves.
4.

Easy·Identify[1 mark]

Two curves intersect at x=−2x=-2x=−2, x=1x=1x=1, and x=4x=4x=4. Which intervals should be checked separately to determine the top curve and bottom curve?
Show answer and explanation

Answer: C · Worked explanation

Consecutive intersection values divide the region into the intervals [−2,1][-2,1][−2,1] and [1,4][1,4][1,4]. The curve order can change at an intersection, so each of these sections should be checked separately. Testing only the full interval could miss a change in which curve is on top.
5.

Medium·Determine[2 marks]

For y=x3−4xy=x^3-4xy=x3−4x and y=0y=0y=0, the intersection values are x=−2x=-2x=−2, 0, and 2. Determine which curve is the top curve on each interval.
Show answer and explanation

Answer: A · Worked explanation

Test x=−1x=-1x=−1 on (−2,0)(-2,0)(−2,0): x3−4x=3x^3-4x=3x3−4x=3, which is above 0. Test x=1x=1x=1 on (0,2)(0,2)(0,2): x3−4x=−3x^3-4x=-3x3−4x=−3, so y=0y=0y=0 is above the cubic. The cubic therefore changes from top to bottom at the middle intersection.
6.

Medium·Select[2 marks]

The curves y=x3−4xy=x^3-4xy=x3−4x and y=0y=0y=0 intersect at x=−2x=-2x=−2, 0, and 2. Which expression gives the sum of the two section areas?
Show answer and explanation

Answer: C · Worked explanation

On [−2,0][-2,0][−2,0], the cubic is above 0, so the integrand is x3−4xx^3-4xx3−4x. On [0,2][0,2][0,2], 0 is above the cubic, so the integrand is 4x−x34x-x^34x−x3. Adding these separate nonnegative integrals gives the total area; integrating the same signed difference across the full interval would cancel the two equal section areas.
7.

Medium·Calculate[2 marks]

The curves y=x3−4xy=x^3-4xy=x3−4x and y=0y=0y=0 enclose two sections between x=−2x=-2x=−2 and x=2x=2x=2. Calculate their total area.
Show answer and explanation

Answer: C · Worked explanation

The cubic is above the axis on [−2,0][-2,0][−2,0] and below it on [0,2][0,2][0,2]. By symmetry, the areas are equal; one is ∫02(4x−x3) dx=[2x2−x4/4]02=4\int_0^2(4x-x^3)\,dx=[2x^2-x^4/4]_0^2=4∫02​(4x−x3)dx=[2x2−x4/4]02​=4. Adding both section areas gives 8 square units. The signed integral over the full interval is zero because the positive and negative contributions cancel.
8.

Medium·Write[2 marks]

The curves y=x3−3xy=x^3-3xy=x3−3x and y=0y=0y=0 meet at x=−3x=-\sqrt{3}x=−3​, 0, and 3\sqrt{3}3​. Which setup correctly adds the areas of the sections between the outer intersections?
Show answer and explanation

Answer: A · Worked explanation

At x=−1x=-1x=−1, the cubic has value 2, so it is above the axis on the left section. At x=1x=1x=1, it has value -2, so the axis is above the cubic on the right section. The correct setup uses top minus bottom on each interval and adds the resulting nonnegative areas.
9.

Medium·Calculate[2 marks]

Calculate the area between y=x2y=x^2y=x2 and y=xy=xy=x on the interval 0≤x≤10\le x\le 10≤x≤1.
Show answer and explanation

Answer: D · Worked explanation

For 0<x<10<x<10<x<1, xxx is above x2x^2x2, so the area is ∫01(x−x2) dx=[x2/2−x3/3]01=1/2−1/3=1/6\int_0^1(x-x^2)\,dx=[x^2/2-x^3/3]_0^1=1/2-1/3=1/6∫01​(x−x2)dx=[x2/2−x3/3]01​=1/2−1/3=1/6 square units. Using x2−xx^2-xx2−x would reverse top minus bottom and produce a negative signed value rather than the area's value.
10.

Hard·Deduce[2 marks]

Two curves intersect at x=−3x=-3x=−3, x=0x=0x=0, and x=2x=2x=2. A student checks only x=−1x=-1x=−1 and concludes that one top-minus-bottom expression will work from -3 to 2. Deduce the flaw in this reasoning.
Show answer and explanation

Answer: C · Worked explanation

The intersection at x=0x=0x=0 splits the region into [−3,0][-3,0][−3,0] and [0,2][0,2][0,2], and the curves may switch order there. A test at x=−1x=-1x=−1 establishes their order only on the left interval; a test on the right is also needed. Assuming that the outer intersections alone determine the order can produce a negative integrand on part of the region.

Keep going

Next topic8.7 Volumes: square and rectangle cross sectionsPrevious topic8.5 Area between curves (functions of y)

More in Unit 8 · Applications of Integration

  1. 8.2Position, velocity and acceleration with integralsNotes · 10 questions
  2. 8.3Accumulation in applied contextsNotes · 10 questions
  3. 8.4Area between curves (functions of x)Notes · 10 questions
  4. 8.5Area between curves (functions of y)Notes · 9 questions
  5. 8.6Area between curves with several intersectionsNotes · 10 questions
  6. 8.7Volumes: square and rectangle cross sectionsNotes · 10 questions
  7. 8.8Volumes: triangle and semicircle cross sectionsNotes · 10 questions
  8. 8.9Disc method about the x- or y-axisNotes · 10 questions
  9. 8.10Disc method about other axesNotes · 9 questions

All AP Calculus AB topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Intersections divide the region into smaller sections
  2. 2Check which curve is higher on each interval
  3. 3Each section needs its own nonnegative area integral
  4. 4Add the section areas to obtain total area
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe