Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›1 Limits and Continuity
  4. ›1.11 Continuity at a point

AP Calculus BC · Unit 1 · Limits and Continuity

1.11 Continuity at a point

Check the three conditions for continuity at a point and explain what fails when a function is not continuous there.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Continuity at a point requires a matching limit and value
  1. 1Continuity at a point requires a matching limit and value
  2. 2Three conditions give a reliable continuity check
  3. 3Each failed condition identifies why continuity fails
  4. 4Piecewise definitions require checking the boundary carefully
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Continuity at a point requires a matching limit and value

A function is continuous at a point x=ax=ax=a when its values approach the value assigned there. In symbols, lim⁡x→af(x)=f(a)\lim_{x\to a}f(x)=f(a)limx→a​f(x)=f(a). The function value f(a)f(a)f(a) is the output at the point itself. The limit describes what nearby outputs approach, without using the output at aaa. These are separate pieces of information. A graph can help. As you move toward aaa from either side, the graph must approach its filled point at x=ax=ax=a.

Figure 1. The curve approaches one height from both sides. The filled point shows a different assigned value.

Key terms · tap one for its definition

continuous at a point

A function is continuous at x=ax=ax=a when f(a)f(a)f(a) and lim⁡x→af(x)\lim_{x\to a}f(x)limx→a​f(x) both exist and are equal.

function value

The function value f(a)f(a)f(a) is the output assigned to the input aaa.

Part 1 done

2

Part 2 of 4: Three conditions give a reliable continuity check

Check continuity at x=ax=ax=a in a fixed order. First, f(a)f(a)f(a) must be defined. Second, the two-sided limit lim⁡x→af(x)\lim_{x\to a}f(x)limx→a​f(x) must exist. This requires the left-hand and right-hand limits to agree. Third, that limit must equal f(a)f(a)f(a). If all three conditions hold, the function is continuous at aaa. If any one fails, it is not continuous there. If a formula does not give the limit directly, examine nearby inputs. Do not assume the value at aaa determines the limit.

Exam tip

State the value, the limit, and whether they agree. A conclusion alone does not show which condition you checked.

Key term

two-sided limit

A two-sided limit exists when the left-hand and right-hand limits exist and equal the same number.

Part 2 done

Quick check

One question on the part you just read

Easy

Determine whether p(x)=x2+1p(x)=x^2+1p(x)=x2+1 is continuous at x=2x=2x=2.
Show answer and explanation

Answer: A · Worked explanation

The function value is p(2)=5p(2)=5p(2)=5, and the limit as xxx approaches 2 is also 5, since the polynomial's values approach its value there. Thus all three continuity conditions hold. The claim that the function value is undefined is incorrect: substituting 2 into the polynomial gives a defined output.
3

Part 3 of 4: Each failed condition identifies why continuity fails

An undefined value means the first condition fails, even if nearby outputs approach one number. If the left-hand and right-hand limits disagree, the two-sided limit does not exist. The second condition then fails. A limit may exist while the function has a different value at the point. In that case, the third condition fails. Describe the failure precisely rather than saying only that the graph has a break. One point can fail more than one condition; follow the checks in order to make your reasoning clear.

Common mistake

A filled point does not guarantee continuity. Nearby function values must approach that point's height.

Key term

undefined value

A function has an undefined value at aaa when it assigns no output to that input.

Part 3 done

4

Part 4 of 4: Piecewise definitions require checking the boundary carefully

For a piecewise function, the rule containing the equality sign gives the value at the boundary. Find the limit separately from each side. If those limits agree, compare their common value with the assigned function value. Do not substitute into only one rule and call the result the limit. At a boundary, the nearby inputs on opposite sides can follow different formulas. This makes all three continuity conditions important, even when each formula looks simple.

Worked example

Check continuity at a piecewise boundary

Let f(x)={x+1,x<25,x=2x2−1,x>2.f(x)=\begin{cases}x+1,&x<2\\5,&x=2\\x^2-1,&x>2.\end{cases}f(x)=⎩⎨⎧​x+1,5,x2−1,​x<2x=2x>2.​ Determine whether fff is continuous at x=2x=2x=2.
  1. 1
    The middle rule gives f(2)=5f(2)=5f(2)=5, so the function value exists.
  2. 2
    From the left, lim⁡x→2−f(x)=2+1=3\lim_{x\to2^-}f(x)=2+1=3limx→2−​f(x)=2+1=3.
  3. 3
    From the right, lim⁡x→2+f(x)=22−1=3\lim_{x\to2^+}f(x)=2^2-1=3limx→2+​f(x)=22−1=3.
  4. 4
    The limits agree, so lim⁡x→2f(x)=3\lim_{x\to2}f(x)=3limx→2​f(x)=3. Compare this with f(2)=5f(2)=5f(2)=5.

Answer: The function is not continuous at x=2x=2x=2 because 3≠53\ne53=5. No units are specified.

Key term

piecewise function

A piecewise function uses different rules for different parts of its domain.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[3 marks]

    State the three conditions for continuity at x=ax=ax=a.

    Show mark schemeHide mark scheme

    Model answer

    f(a)f(a)f(a) is defined, lim⁡x→af(x)\lim_{x\to a}f(x)limx→a​f(x) exists, and lim⁡x→af(x)=f(a)\lim_{x\to a}f(x)=f(a)limx→a​f(x)=f(a).

    • 1 mark for stating that f(a)f(a)f(a) is defined
    • 1 mark for stating that lim⁡x→af(x)\lim_{x\to a}f(x)limx→a​f(x) exists
    • 1 mark for stating that the limit equals f(a)f(a)f(a)
  2. 2.Explain[2 marks]

    Explain why a defined function value alone does not establish continuity.

    Show mark schemeHide mark scheme

    Model answer

    Nearby outputs must approach a single limit. That limit must equal the defined function value.

    • 1 mark for explaining that the two-sided limit must exist
    • 1 mark for explaining that the limit must equal the function value
  3. 3.Determine[2 marks]

    Determine whether fff is continuous at x=1x=1x=1 if f(1)=4f(1)=4f(1)=4 and lim⁡x→1f(x)=4\lim_{x\to1}f(x)=4limx→1​f(x)=4.

    Show mark schemeHide mark scheme

    Model answer

    Yes. The function value and limit both exist, and they are equal.

    • 1 mark for identifying that the function value and limit both exist
    • 1 mark for concluding that fff is continuous because they are equal
  4. 4.Determine[3 marks]

    Determine whether ggg is continuous at x=3x=3x=3 if g(3)=2g(3)=2g(3)=2, the left-hand limit is 2, and the right-hand limit is 5.

    Show mark schemeHide mark scheme

    Model answer

    The one-sided limits differ, so the two-sided limit does not exist. The second condition fails, and ggg is not continuous at x=3x=3x=3.

    • 1 mark for identifying that the one-sided limits differ
    • 1 mark for concluding that the two-sided limit does not exist
    • 1 mark for concluding that ggg is not continuous at x=3x=3x=3
  5. 5.Determine[3 marks]

    Determine whether hhh is continuous at x=2x=2x=2 if h(x)=x+1h(x)=x+1h(x)=x+1 for x≠2x\ne2x=2 and h(2)=7h(2)=7h(2)=7.

    Show mark schemeHide mark scheme

    Model answer

    The function value is h(2)=7h(2)=7h(2)=7, but lim⁡x→2h(x)=3\lim_{x\to2}h(x)=3limx→2​h(x)=3. The third condition fails, so hhh is not continuous at x=2x=2x=2.

    • 1 mark for finding h(2)=7h(2)=7h(2)=7
    • 1 mark for finding lim⁡x→2h(x)=3\lim_{x\to2}h(x)=3limx→2​h(x)=3
    • 1 mark for concluding that hhh is not continuous because the limit and value differ

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A function has no assigned value at x=4x=4x=4, although its values approach 6 from both sides of 4. Identify the condition that fails first in the continuity check.
Show answer and explanation

Answer: B · Worked explanation

The first continuity condition is that the function value at the point is defined, and this condition fails because no value is assigned at x=4x=4x=4. The nearby values approaching 6 mean the two-sided limit exists, so the second condition does not fail. Comparing the limit with a function value is not possible here because there is no assigned value.
3.

Easy·Determine[1 mark]

Determine whether the two-sided limit of q(x)q(x)q(x) exists at x=1x=1x=1 if the left-hand limit is 3 and the right-hand limit is 3.
Show answer and explanation

Answer: D · Worked explanation

The two-sided limit exists when the left-hand and right-hand limits exist and agree. Both one-sided limits are 3, so the two-sided limit is 3. The function's value at x=1x=1x=1 is not needed to decide whether this limit exists; it matters later when checking continuity.
4.

Easy·Identify[1 mark]

For the piecewise function r(x)={2x,x<37,x=3x+1,x>3r(x)=\begin{cases}2x,&x<3\\7,&x=3\\x+1,&x>3\end{cases}r(x)=⎩⎨⎧​2x,7,x+1,​x<3x=3x>3​, identify the function value at the boundary x=3x=3x=3.
Show answer and explanation

Answer: B · Worked explanation

The equality case in the piecewise definition assigns the value at the boundary, so r(3)=7r(3)=7r(3)=7. The expressions for x<3x<3x<3 and x>3x>3x>3 describe nearby inputs, not the function value at 3. In particular, substituting 3 into either neighboring rule would not identify the assigned value.
5.

Medium·Determine[2 marks]

At x=2x=2x=2, a function has value f(2)=4f(2)=4f(2)=4, and its left-hand and right-hand limits are both 4. Determine whether fff is continuous at x=2x=2x=2.
Show answer and explanation

Answer: A · Worked explanation

The equal one-sided limits give a two-sided limit of 4, and the function value at 2 is also 4. The value is defined, the limit exists, and they agree, so the function is continuous there. The idea that the function value must differ from the limit reverses the continuity condition.
6.

Medium·Determine[2 marks]

A piecewise function is defined by s(x)={x+2,x<14,x=13x,x>1s(x)=\begin{cases}x+2,&x<1\\4,&x=1\\3x,&x>1\end{cases}s(x)=⎩⎨⎧​x+2,4,3x,​x<1x=1x>1​. Determine whether it is continuous at x=1x=1x=1.
Show answer and explanation

Answer: A · Worked explanation

From the left, the limit is 1+2=31+2=31+2=3; from the right, it is 3(1)=33(1)=33(1)=3. Thus the two-sided limit exists and equals 3, while the equality case assigns s(1)=4s(1)=4s(1)=4. The function is not continuous because these values differ. The one-sided limits do not differ; both approach 3.
7.

Medium·Explain[2 marks]

At x=5x=5x=5, a function is defined with value 2. As xxx approaches 5 from the left its values approach 2, and from the right they approach 8. Explain why the function is not continuous at x=5x=5x=5.
Show answer and explanation

Answer: C · Worked explanation

The left-hand limit is 2 and the right-hand limit is 8, so they disagree and the two-sided limit does not exist. This means the second condition for continuity fails, even though the function value is defined. Saying the two-sided limit exists but differs from the value would incorrectly treat the unequal one-sided limits as a single limit.
8.

Medium·Determine[2 marks]

For t≠3t\ne 3t=3, let g(t)=t2−5g(t)=t^2-5g(t)=t2−5. Choose the value of g(3)g(3)g(3) that makes ggg continuous at t=3t=3t=3.
Show answer and explanation

Answer: B · Worked explanation

For inputs near 3, g(t)=t2−5g(t)=t^2-5g(t)=t2−5 approaches 32−5=43^2-5=432−5=4. Continuity requires the assigned value g(3)g(3)g(3) to equal that limit.
9.

Medium·Calculate[2 marks]

For x≠2x\ne 2x=2, let h(x)=x2−4x−2h(x)=\frac{x^2-4}{x-2}h(x)=x−2x2−4​, and let h(2)=kh(2)=kh(2)=k. Calculate the value of kkk that makes hhh continuous at x=2x=2x=2.
Show answer and explanation

Answer: D · Worked explanation

For x≠2x\ne2x=2, factor the numerator: x2−4=(x−2)(x+2)x^2-4=(x-2)(x+2)x2−4=(x−2)(x+2), so h(x)=x+2h(x)=x+2h(x)=x+2 near 2. Therefore, the limit is 2+2=42+2=42+2=4, and continuity requires h(2)=k=4h(2)=k=4h(2)=k=4. Choosing 0 because the original numerator is zero at 2 overlooks that the quotient rule applies only for nearby inputs, not at the excluded point.
10.

Hard·Deduce[2 marks]

A function uuu has no assigned value at x=0x=0x=0. Its values approach -1 from the left and -1 from the right. Deduce which continuity conditions fail at x=0x=0x=0.
Show answer and explanation

Answer: B · Worked explanation

The one-sided limits agree, so the two-sided limit exists and equals -1. However, u(0)u(0)u(0) is undefined: the function-value condition fails, and there is no assigned value that can equal the limit.

Keep going

Next topic1.12 Continuity over an intervalPrevious topic1.10 Types of discontinuities

More in Unit 1 · Limits and Continuity

  1. 1.7Choosing a limit procedureNotes · 10 questions
  2. 1.8Squeeze theoremNotes · 10 questions
  3. 1.9Multiple representations of limitsNotes · 10 questions
  4. 1.10Types of discontinuitiesNotes · 10 questions
  5. 1.11Continuity at a pointNotes · 10 questions
  6. 1.12Continuity over an intervalNotes · 10 questions
  7. 1.13Removing discontinuitiesNotes · 10 questions
  8. 1.14Infinite limits and vertical asymptotesNotes · 10 questions
  9. 1.15Limits at infinity and horizontal asymptotesNotes · 10 questions

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Continuity at a point requires a matching limit and value
  2. 2Three conditions give a reliable continuity check
  3. 3Each failed condition identifies why continuity fails
  4. 4Piecewise definitions require checking the boundary carefully
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe