Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›1 Limits and Continuity
  4. ›1.7 Choosing a limit procedure

AP Calculus BC · Unit 1 · Limits and Continuity

1.7 Choosing a limit procedure

Choose and justify a limit method, then switch methods when needed.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4The given information helps you choose a method
  1. 1The given information helps you choose a method
  2. 2Algebra can establish limits that estimates only suggest
  3. 3A failed estimate calls for different evidence
  4. 4A strong solution explains why its method fits
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: The given information helps you choose a method

A limit describes what a function approaches near an input. Your first choice depends on the information available. Use a graphical method when a graph shows the behavior near that input. It is especially useful for checking whether the two sides approach the same value. Use a numerical method when you have a table or can calculate nearby values. Values from both sides give stronger evidence than values from one side alone.

Use an algebraic method when a formula allows a definite result. Graphs and tables usually support estimates, not exact answers. A graph may lack enough detail near the input. A table may hide a sharp change between its entries. Choose the method that answers the question with the available evidence.

Figure 1. Start with the information available. Reconsider your choice if it cannot support your conclusion.

Key terms · tap one for its definition

graphical method

A graphical method uses the behavior shown near an input to estimate a limit or compare its sides.

numerical method

A numerical method uses function values at inputs approaching a target to estimate a limit.

Part 1 done

2

Part 2 of 4: Algebra can establish limits that estimates only suggest

For a formula, try direct substitution first. If it produces a defined value, it gives the limit for a function continuous there. If it produces 00\frac{0}{0}00​, substitution has not found the limit. This indeterminate form signals that another step is needed. You might factor and cancel a common factor, then substitute again. A graph or table can help predict the result before you simplify.

Worked example

Choose a method after substitution fails

Find lim⁡x→2x2−4x−2\lim_{x\to 2}\frac{x^2-4}{x-2}limx→2​x−2x2−4​.
  1. 1
    Substitute x=2x=2x=2: 22−42−2=00\frac{2^2-4}{2-2}=\frac{0}{0}2−222−4​=00​, so switch methods.
  2. 2
    Factor the numerator: x2−4=(x−2)(x+2)x^2-4=(x-2)(x+2)x2−4=(x−2)(x+2).
  3. 3
    For x≠2x\ne 2x=2, simplify: (x−2)(x+2)x−2=x+2\frac{(x-2)(x+2)}{x-2}=x+2x−2(x−2)(x+2)​=x+2.
  4. 4
    Take the limit of the simplified expression: 2+2=42+2=42+2=4.

Answer: The limit is 4.

Common mistake

00\frac{0}{0}00​ is not the limit. It means direct substitution cannot determine the limit.

Key terms · tap one for its definition

direct substitution

Direct substitution tests a limit by evaluating the given expression at the input being approached.

indeterminate form

An indeterminate form such as 00\frac{0}{0}00​ does not determine the limit without further analysis.

Part 2 done

Quick check

One question on the part you just read

Easy

A limit problem provides a graph of a function near the target input, but no formula or table. Which method most directly uses the information provided to estimate the limit?
Show answer and explanation

Answer: C · Worked explanation

A graphical method uses the function’s displayed behavior near the target input, including whether the left and right sides approach the same value. Direct substitution is not available because no formula or exact function value is given, and the graph supports an estimate rather than an exact answer.
3

Part 3 of 4: A failed estimate calls for different evidence

A table can suggest a limit without proving one exists. Check the left-hand limit and right-hand limit separately when behavior might differ. If they disagree, the two-sided limit does not exist. A graph can make that disagreement easier to see. If a graph is too coarse, use closer numerical inputs or an available formula. If table values seem unstable, inspect the formula rather than guessing from a few entries.

Switching methods should address a specific weakness. For example, algebra can settle an exact value that a table only suggests. A graph can reveal a jump that a one-sided table misses. If only a graph or table is provided, state an estimate rather than claiming an exact result.

Exam tip

When justifying a switch, name what the first method cannot establish. Then explain how the new method addresses that gap.

Key terms · tap one for its definition

left-hand limit

A left-hand limit describes the value approached from inputs below the target.

right-hand limit

A right-hand limit describes the value approached from inputs above the target.

Part 3 done

4

Part 4 of 4: A strong solution explains why its method fits

A method justification connects your choice to the particular limit. Do not write only that algebra is easier or a graph looks clear. Name the useful feature instead. A factorable numerator supports algebraic simplification. A displayed jump supports checking both sides on a graph. Nearby values on both sides support a numerical estimate when no formula is given.

Match your conclusion to your evidence. Algebraic simplification can establish an exact finite limit when its steps are valid near the input. A graph or table gives an estimate unless more information supports certainty. If direct substitution works, further methods may be unnecessary. If it fails, explain the failure before changing course. This makes the reasoning clear, even when the first approach does not succeed.

Key term

method justification

A method justification explains why the available information makes a chosen approach useful for a particular limit.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[1 mark]

    Identify a suitable method when only a table of nearby function values is given.

    Show mark schemeHide mark scheme

    Model answer

    Use a numerical method.

    • 1 mark for identifying a numerical method
  2. 2.Explain[2 marks]

    Explain why a graph may be insufficient for finding an exact limit.

    Show mark schemeHide mark scheme

    Model answer

    A graph usually supports an estimate. It may lack enough detail near the input to establish an exact value.

    • 1 mark for stating that a graph usually supports an estimate rather than an exact answer
    • 1 mark for explaining that the graph may lack detail near the input
  3. 3.Calculate[4 marks]

    Calculate lim⁡x→2x2−4x−2\lim_{x\to 2}\frac{x^2-4}{x-2}limx→2​x−2x2−4​ and explain your change of method.

    Show mark schemeHide mark scheme

    Model answer

    Substitution gives 00\frac{0}{0}00​, so it cannot determine the limit. Factor to obtain (x−2)(x+2)x−2\frac{(x-2)(x+2)}{x-2}x−2(x−2)(x+2)​. For x≠2x\ne2x=2, this equals x+2x+2x+2. The limit is 4.

    • 1 mark for showing that direct substitution gives 00\frac{0}{0}00​ and does not determine the limit
    • 1 mark for factoring x2−4x^2-4x2−4 as (x−2)(x+2)(x-2)(x+2)(x−2)(x+2)
    • 1 mark for canceling the common factor for x≠2x\ne2x=2
    • 1 mark for giving the limit as 4
  4. 4.Justify[3 marks]

    Justify checking a graph after a table using only inputs below the target suggests a limit.

    Show mark schemeHide mark scheme

    Model answer

    The table only shows behavior from the left. A graph can show behavior from both sides. The two-sided limit exists only if both sides approach the same value.

    • 1 mark for noting that the table gives only left-side evidence
    • 1 mark for stating that the graph can show behavior on both sides
    • 1 mark for stating that both sides must approach the same value for a two-sided limit
  5. 5.Explain[3 marks]

    Explain when direct substitution is sufficient and when a change of strategy is needed.

    Show mark schemeHide mark scheme

    Model answer

    For a function continuous at the target, a defined substitution value gives the limit. If substitution gives 00\frac{0}{0}00​, it does not determine the limit. Another method, such as algebraic simplification, is needed.

    • 1 mark for stating that substitution gives the limit when the function is continuous at the target
    • 1 mark for stating that 00\frac{0}{0}00​ does not determine a limit
    • 1 mark for proposing another suitable method after that result

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Determine[1 mark]

For the limit lim⁡x→3(x2+2x)\lim_{x\to 3}(x^2+2x)limx→3​(x2+2x), which method is most appropriate, and what value does it give?
Show answer and explanation

Answer: D · Worked explanation

Direct substitution gives 32+2(3)=153^2+2(3)=1532+2(3)=15. Because this polynomial is continuous at x=3x=3x=3, substitution establishes the limit directly; numerical or graphical estimates are unnecessary for this formula.
3.

Easy·Explain[1 mark]

A function is given only by a table of values at inputs close to x=1x=1x=1, with entries on both sides of 1. Why is a numerical method an appropriate first choice for estimating the limit?
Show answer and explanation

Answer: A · Worked explanation

A numerical method uses function values at inputs approaching the target, and entries on both sides provide evidence about the two-sided behavior. The table may suggest a limit, but it does not by itself prove continuity or establish an exact limit.
4.

Easy·State[1 mark]

Direct substitution into a limit expression produces 00\frac{0}{0}00​. What should you conclude about the method?
Show answer and explanation

Answer: C · Worked explanation

The form 00\frac{0}{0}00​ is indeterminate: direct substitution has not determined the limit. For a suitable formula, factoring and canceling a common factor may allow a new substitution; the result cannot be inferred just from the zeros.
5.

Medium·Estimate[1 mark]

A table lists values of f(x)f(x)f(x) near x=2x=2x=2: at 1.9, 3.98; at 1.99, 3.9998; at 2.01, 4.0002; and at 2.1, 4.02. Which conclusion is best supported by these data?
Show answer and explanation

Answer: A · Worked explanation

The listed values approach 4 as the inputs approach 2 from below and above, so a numerical method supports an estimate of 4. The table does not prove an exact limit or tell us the function’s value at x=2x=2x=2; distinct nearby values on opposite sides do not by themselves imply the limit fails to exist.
6.

Medium·Justify[2 marks]

To find lim⁡x→4x2−16x−4\lim_{x\to 4}\frac{x^2-16}{x-4}limx→4​x−4x2−16​, a student wants an exact result rather than an estimate. Which method and justification are best?
Show answer and explanation

Answer: C · Worked explanation

Algebra is appropriate because x2−16=(x−4)(x+4)x^2-16=(x-4)(x+4)x2−16=(x−4)(x+4), so for x≠4x\ne4x=4 the expression simplifies to x+4x+4x+4 and its limit is 8. A numerical method could suggest 8, but nearby values alone do not establish the exact result; direct substitution instead gives 00\frac{0}{0}00​.
7.

Medium·Determine[2 marks]

For lim⁡x→2x+1x−2\lim_{x\to 2}\frac{x+1}{x-2}limx→2​x−2x+1​, direct substitution gives a nonzero numerator and a zero denominator. Which next approach best addresses the limitation of substitution?
Show answer and explanation

Answer: A · Worked explanation

Substitution does not produce a defined value, and the nonzero numerator over a denominator approaching zero makes behavior on either side important. Checking both sides numerically or graphically can reveal whether the function grows in different directions; the numerator does not contain a factor of x−2x-2x−2 to cancel.
8.

Medium·Choose[2 marks]

A graph near x=5x=5x=5 is drawn with a coarse scale, and the plotted curve appears to approach roughly 2. A formula for the function is also available and can be simplified. Which approach is best if an exact limit is required?
Show answer and explanation

Answer: C · Worked explanation

The graph’s coarse scale supports only a rough estimate, while an available formula may allow algebraic simplification and an exact limit. The value at the target itself need not determine the limit, and a few table entries also provide evidence rather than proof.
9.

Medium·Deduce[2 marks]

A table for an unknown function gives f(2.9)=1.8f(2.9)=1.8f(2.9)=1.8, f(2.99)=1.98f(2.99)=1.98f(2.99)=1.98, and f(2.999)=1.998f(2.999)=1.998f(2.999)=1.998. No values above 3 and no formula are provided. What is the strongest justified conclusion about lim⁡x→3f(x)\lim_{x\to3}f(x)limx→3​f(x)?
Show answer and explanation

Answer: A · Worked explanation

The listed values are all from below 3 and approach 2, so they suggest a left-hand limit of 2. A two-sided limit also requires evidence about inputs above 3, and this table supplies none; it therefore cannot establish the two-sided limit or its nonexistence.
10.

Hard·Determine[2 marks]

A table for g(x)=x2−1x−1g(x)=\frac{x^2-1}{x-1}g(x)=x−1x2−1​ near x=1x=1x=1 gives values close to 2 from both sides. A student concludes that the limit is 2 based only on the table. Which response best improves the solution?
Show answer and explanation

Answer: A · Worked explanation

The table suggests a limit of 2, but it cannot by itself establish an exact value. Algebra confirms it: x2−1=(x−1)(x+1)x^2-1=(x-1)(x+1)x2−1=(x−1)(x+1), so for x≠1x\ne1x=1, g(x)=x+1g(x)=x+1g(x)=x+1 and the limit is 2. Direct substitution gives 00\frac{0}{0}00​, which is indeterminate rather than a limit value.

Keep going

Next topic1.8 Squeeze theoremPrevious topic1.6 Limits by algebraic manipulation

More in Unit 1 · Limits and Continuity

  1. 1.3Estimating limits from graphsNotes · 10 questions
  2. 1.4Estimating limits from tablesNotes · 10 questions
  3. 1.5Algebraic properties of limitsNotes · 10 questions
  4. 1.6Limits by algebraic manipulationNotes · 10 questions
  5. 1.7Choosing a limit procedureNotes · 10 questions
  6. 1.8Squeeze theoremNotes · 10 questions
  7. 1.9Multiple representations of limitsNotes · 10 questions
  8. 1.10Types of discontinuitiesNotes · 10 questions
  9. 1.11Continuity at a pointNotes · 10 questions

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1The given information helps you choose a method
  2. 2Algebra can establish limits that estimates only suggest
  3. 3A failed estimate calls for different evidence
  4. 4A strong solution explains why its method fits
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe