Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›5 Analytical Applications of Differentiation
  4. ›5.3 Increasing and decreasing intervals

AP Calculus BC · Unit 5 · Analytical Applications of Differentiation

5.3 Increasing and decreasing intervals

Determine intervals of increase and decrease from derivatives, graphs, and tables, and explain the role of derivative signs.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4The derivative sign describes how a function changes
  1. 1The derivative sign describes how a function changes
  2. 2A derivative sign chart identifies intervals of change
  3. 3Graphs show change as input moves right
  4. 4Tables support interval claims only with enough information
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: The derivative sign describes how a function changes

A function is increasing on an interval when larger input values give larger output values. It is decreasing when larger inputs give smaller outputs. The derivative gives the slope of a function at a point. A positive derivative means the function rises as the input increases. A negative derivative means it falls.

To justify behavior across an interval, check the derivative throughout that interval. If f′(x)>0f'(x)>0f′(x)>0 everywhere inside it, fff increases there. If f′(x)<0f'(x)<0f′(x)<0 everywhere inside it, fff decreases there. A derivative of zero at one point does not establish either behavior. Report intervals using input values, not output values.

Common mistake

A negative function value does not mean the function is decreasing. Its derivative, not its height, determines the direction of change.

Key terms · tap one for its definition

increasing

A function is increasing on an interval if every larger input in that interval gives a larger output.

decreasing

A function is decreasing on an interval if every larger input in that interval gives a smaller output.

derivative

The derivative gives a function’s instantaneous rate of change with respect to its input.

Part 1 done

2

Part 2 of 4: A derivative sign chart identifies intervals of change

First, find where the derivative equals zero or does not exist. Also note any boundaries of the function’s domain. These values split the domain into intervals. Choose a test point inside each interval and determine the sign of f′f'f′ there. A sign chart records those signs and the resulting behavior. This method works when the derivative’s sign stays constant between the values you identified.

Worked example

Find intervals from a derivative

Find where f(x)=x3−12xf(x)=x^3-12xf(x)=x3−12x increases and decreases.
  1. 1
    f′(x)=3x2−12=3(x−2)(x+2)f'(x)=3x^2-12=3(x-2)(x+2)f′(x)=3x2−12=3(x−2)(x+2).
  2. 2
    Solve f′(x)=0f'(x)=0f′(x)=0: the dividing values are x=−2x=-2x=−2 and x=2x=2x=2.
  3. 3
    Test x=−3x=-3x=−3: f′(−3)=15>0f'(-3)=15>0f′(−3)=15>0. Test x=0x=0x=0: f′(0)=−12<0f'(0)=-12<0f′(0)=−12<0.
  4. 4
    Test x=3x=3x=3: f′(3)=15>0f'(3)=15>0f′(3)=15>0.

Answer: fff increases on (−∞,−2)(-\infty,-2)(−∞,−2) and (2,∞)(2,\infty)(2,∞). It decreases on (−2,2)(-2,2)(−2,2). The input values have no units.

Exam tip

State intervals with parentheses around the dividing values. Then connect each interval to its derivative sign.

Key terms · tap one for its definition

test point

A test point is an input chosen within an interval to check the derivative’s sign there.

sign chart

A sign chart records the derivative’s sign on intervals separated by relevant domain values.

Part 2 done

Quick check

One question on the part you just read

Easy

State what the sign of f′(x)f'(x)f′(x) tells you about the behavior of fff on an interval where that sign is constant.
Show answer and explanation

Answer: A · Worked explanation

A positive derivative throughout an interval means the function rises as the input increases, while a negative derivative throughout means it falls. The tempting option involving the sign of f(x)f(x)f(x) confuses the function's height with its direction of change; the derivative, not whether the function is above or below zero, determines that direction.
3

Part 3 of 4: Graphs show change as input moves right

On a graph of fff, trace the curve from left to right. Rising sections are increasing; falling sections are decreasing. Read the input values where that behavior changes, then write intervals along the horizontal axis. On a graph of f′f'f′, use a different approach. Regions above the horizontal axis show where fff increases. Regions below it show where fff decreases.

The derivative graph’s height gives slope, not the height of fff. An axis crossing can separate intervals with different behavior. Check whether f′f'f′ changes sign there. The displayed window may hide behavior outside its visible range, so restrict conclusions to the information shown.

Figure 1. Above the horizontal axis, the original function increases. Below it, the original function decreases.

Part 3 done

4

Part 4 of 4: Tables support interval claims only with enough information

A table of derivative values shows behavior where the derivative’s sign is known. If the table states that f′(x)>0f'(x)>0f′(x)>0 throughout an interval, then fff increases there. If it states that f′(x)<0f'(x)<0f′(x)<0 throughout, then fff decreases there. Individual sampled values alone cannot establish the sign between samples.

A table of function values supports comparisons between listed inputs. When outputs rise across consecutive rows, those sampled outputs increase. The function could still turn between rows. Do not claim it increases across the entire interval without further information. A table may also give intervals with a stated derivative sign. In that case, use those intervals directly, while respecting any excluded inputs.

Common mistake

Two positive derivative samples do not prove the derivative is positive between them. State only what the table establishes.

Key terms · tap one for its definition

derivative values

Derivative values report slopes at specified inputs, rather than changes across every input between them.

function values

Function values are outputs associated with specified inputs.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[2 marks]

    Explain how the sign of f′f'f′ determines whether fff increases or decreases on an interval.

    Show mark schemeHide mark scheme

    Model answer

    If f′f'f′ is positive throughout an interval, fff increases there. If f′f'f′ is negative throughout, fff decreases there.

    • 1 mark for linking a positive derivative throughout an interval to an increasing function
    • 1 mark for linking a negative derivative throughout an interval to a decreasing function
  2. 2.Determine[4 marks]

    Determine the intervals where ggg increases and decreases if g′(x)=(x+1)(x−3)g'(x)=(x+1)(x-3)g′(x)=(x+1)(x−3) for all real xxx. Show how you checked the signs.

    Show mark schemeHide mark scheme

    Model answer

    The dividing values are x=−1x=-1x=−1 and x=3x=3x=3. Testing x=−2x=-2x=−2, 0, and 4 gives positive, negative, and positive derivative signs. Therefore, ggg increases on (−∞,−1)(-\infty,-1)(−∞,−1) and (3,∞)(3,\infty)(3,∞), and decreases on (−1,3)(-1,3)(−1,3).

    • 1 mark for finding the dividing values x=−1x=-1x=−1 and x=3x=3x=3
    • 1 mark for establishing positive, negative, then positive derivative signs across the three intervals
    • 1 mark for stating both increasing intervals
    • 1 mark for stating the decreasing interval
  3. 3.Interpret[2 marks]

    A graph of h′h'h′ lies below the horizontal axis for −2<x<1-2<x<1−2<x<1 and above it for 1<x<41<x<41<x<4. Describe how hhh behaves on these intervals.

    Show mark schemeHide mark scheme

    Model answer

    hhh decreases on (−2,1)(-2,1)(−2,1) because h′<0h'<0h′<0. It increases on (1,4)(1,4)(1,4) because h′>0h'>0h′>0.

    • 1 mark for stating that hhh decreases on (−2,1)(-2,1)(−2,1) because its derivative is negative
    • 1 mark for stating that hhh increases on (1,4)(1,4)(1,4) because its derivative is positive
  4. 4.Evaluate[3 marks]

    A table gives f′(0)=2f'(0)=2f′(0)=2 and f′(2)=3f'(2)=3f′(2)=3. Evaluate the claim that fff increases throughout (0,2)(0,2)(0,2).

    Show mark schemeHide mark scheme

    Model answer

    The claim is not established. Both listed slopes are positive, but the table gives no derivative signs between 0 and 2. The derivative could be negative somewhere inside that interval.

    • 1 mark for stating that the claim is not established
    • 1 mark for noting that the table gives derivative signs only at the listed inputs
    • 1 mark for recognizing that the derivative could be negative between those inputs
  5. 5.Compare[2 marks]

    Compare what a table of increasing function values shows with what is needed to establish increase throughout an interval.

    Show mark schemeHide mark scheme

    Model answer

    The table shows that outputs increase at its listed inputs. To establish increase throughout an interval, information must rule out a decrease between listed inputs.

    • 1 mark for stating that increasing listed outputs establish change only across those sampled inputs
    • 1 mark for stating that behavior between inputs needs further information

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A graph of ppp rises from left to right for −4<x<2-4<x<2−4<x<2 and falls from left to right for 2<x<52<x<52<x<5. Identify the full stated interval on which ppp is decreasing.
Show answer and explanation

Answer: D · Worked explanation

A curve that falls as the input moves to the right represents a decreasing function, so the full stated decreasing interval is (2,5)(2,5)(2,5). The graph rises on (−4,2)(-4,2)(−4,2); an interval that includes inputs there cannot be a decreasing interval.
3.

Easy·Determine[1 mark]

Determine where qqq is increasing if q′(x)=5q'(x)=5q′(x)=5 for every real number xxx.
Show answer and explanation

Answer: C · Worked explanation

Since q′(x)=5>0q'(x)=5>0q′(x)=5>0 for every real input, qqq increases on the entire real line, (−∞,∞)(-\infty,\infty)(−∞,∞). A constant derivative does not mean the function is constant; it means the function has the same positive slope everywhere.
4.

Easy·Explain[1 mark]

A function has values below zero on an interval, but its derivative is positive throughout that interval. Explain what this implies about the function's behavior there.
Show answer and explanation

Answer: B · Worked explanation

A positive derivative throughout the interval means the function increases as the input increases, regardless of whether its values are negative. The tempting claim that negative function values imply decrease confuses the function's height with its rate of change.
5.

Medium·Determine[2 marks]

Determine the intervals where r(x)=x2−6xr(x)=x^2-6xr(x)=x2−6x is increasing and decreasing.
Show answer and explanation

Answer: A · Worked explanation

Differentiate to get r′(x)=2x−6=2(x−3)r'(x)=2x-6=2(x-3)r′(x)=2x−6=2(x−3), which is negative for x<3x<3x<3 and positive for x>3x>3x>3. Thus, rrr decreases on (−∞,3)(-\infty,3)(−∞,3) and increases on (3,∞)(3,\infty)(3,∞). The tempting split at x=6x=6x=6 uses a coefficient in the original function rather than the input where its derivative is zero.
6.

Medium·Determine[2 marks]

A graph of s′s's′ is above the horizontal axis for −3<x<−1-3<x<-1−3<x<−1 and 1<x<41<x<41<x<4, and below it for −1<x<1-1<x<1−1<x<1. Determine where sss is increasing.
Show answer and explanation

Answer: B · Worked explanation

Where s′s's′ is above the horizontal axis, the derivative is positive and sss increases, giving (−3,−1)(-3,-1)(−3,−1) and (1,4)(1,4)(1,4). The interval (−1,1)(-1,1)(−1,1) is where s′s's′ is below the axis, so sss decreases there; combining all the intervals would ignore that change in sign.
7.

Medium·Use[2 marks]

A table states that t′(x)<0t'(x)<0t′(x)<0 for every xxx in (0,2)(0,2)(0,2) and t′(x)>0t'(x)>0t′(x)>0 for every xxx in (2,5)(2,5)(2,5). Use this information to describe the behavior of ttt on those intervals.
Show answer and explanation

Answer: B · Worked explanation

A negative derivative throughout (0,2)(0,2)(0,2) means ttt decreases there, and a positive derivative throughout (2,5)(2,5)(2,5) means it increases there. The option that extends the first interval's behavior to both intervals ignores the stated change in derivative sign at x=2x=2x=2.
8.

Medium·Determine[2 marks]

Determine the intervals of increase and decrease for u(x)=x3−3x2+4u(x)=x^3-3x^2+4u(x)=x3−3x2+4, using its derivative.
Show answer and explanation

Answer: D · Worked explanation

The derivative is u′(x)=3x2−6x=3x(x−2)u'(x)=3x^2-6x=3x(x-2)u′(x)=3x2−6x=3x(x−2). It is positive for x<0x<0x<0, negative for 0<x<20<x<20<x<2, and positive for x>2x>2x>2, so uuu increases on the outer intervals and decreases on the middle interval. The tempting choice that splits only at x=2x=2x=2 misses the other zero of the derivative, x=0x=0x=0.
9.

Medium·Deduce[2 marks]

A table lists v(−2)=1v(-2)=1v(−2)=1, v(0)=4v(0)=4v(0)=4, and v(3)=2v(3)=2v(3)=2. What can you deduce from these function values alone?
Show answer and explanation

Answer: A · Worked explanation

The listed outputs rise from 1 to 4 and then fall from 4 to 2, so those comparisons are established for the sampled inputs. They do not establish behavior at every input between samples: the function could turn between listed inputs, making the claim of increase or decrease throughout an interval unjustified.
10.

Hard·Determine[2 marks]

For w(x)=x+1x−2w(x)=\dfrac{x+1}{x-2}w(x)=x−2x+1​, determine where www is increasing or decreasing on its domain.
Show answer and explanation

Answer: C · Worked explanation

For x≠2x\ne2x=2, the quotient rule gives w′(x)=(x−2)−(x+1)(x−2)2=−3(x−2)2<0w'(x)=\dfrac{(x-2)-(x+1)}{(x-2)^2}=\dfrac{-3}{(x-2)^2}<0w′(x)=(x−2)2(x−2)−(x+1)​=(x−2)2−3​<0. The function therefore decreases on each domain interval, (−∞,2)(-\infty,2)(−∞,2) and (2,∞)(2,\infty)(2,∞). The excluded input x=2x=2x=2 separates the intervals; it is not part of the domain or a point across which one interval can be combined.

Keep going

Next topic5.4 First derivative testPrevious topic5.2 Extreme value theorem and critical points

More in Unit 5 · Analytical Applications of Differentiation

  1. 5.1Mean value theoremNotes · 10 questions
  2. 5.2Extreme value theorem and critical pointsNotes · 10 questions
  3. 5.3Increasing and decreasing intervalsNotes · 10 questions
  4. 5.4First derivative testNotes · 10 questions
  5. 5.5Candidates testNotes · 10 questions
  6. 5.6ConcavityNotes · 10 questions
  7. 5.7Second derivative testNotes · 10 questions
  8. 5.8Sketching functions and their derivativesNotes · 10 questions
  9. 5.9Connecting f, f' and f''Notes · 10 questions

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1The derivative sign describes how a function changes
  2. 2A derivative sign chart identifies intervals of change
  3. 3Graphs show change as input moves right
  4. 4Tables support interval claims only with enough information
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Reading a derivative graph

f′(x)-2-1.5-1-0.500.511.52-10123x
  • f′(x) = x² − 1
  • x = −1
  • x = 1