Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›5 Analytical Applications of Differentiation
  4. ›5.7 Second derivative test

AP Calculus BC · Unit 5 · Analytical Applications of Differentiation

5.7 Second derivative test

State the second derivative test, classify critical points, and explain inconclusive results.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4The second derivative identifies some local extrema
  1. 1The second derivative identifies some local extrema
  2. 2Calculate the second derivative at each stationary point
  3. 3A zero second derivative leaves the result undecided
  4. 4Other critical points need a different check
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: The second derivative identifies some local extrema

Apply the second derivative test at a stationary point where f′(c)=0f'(c)=0f′(c)=0. If f′′(c)>0f''(c)>0f′′(c)>0, the graph bends upward there, so f(c)f(c)f(c) is a local minimum. If f′′(c)<0f''(c)<0f′′(c)<0, the graph bends downward there, so f(c)f(c)f(c) is a local maximum. These conclusions require the relevant derivatives to exist near ccc. A positive or negative second derivative gives a local result, not necessarily an absolute extremum.

Exam tip

State both f′(c)=0f'(c)=0f′(c)=0 and the sign of f′′(c)f''(c)f′′(c) before naming the extremum.

Key terms · tap one for its definition

second derivative test

At f′(c)=0f'(c)=0f′(c)=0, a positive f′′(c)f''(c)f′′(c) gives a local minimum, while a negative f′′(c)f''(c)f′′(c) gives a local maximum.

stationary point

A stationary point is a point on a graph where its first derivative equals zero.

Part 1 done

2

Part 2 of 4: Calculate the second derivative at each stationary point

First find each critical point by solving f′(x)=0f'(x)=0f′(x)=0 and checking where f′f'f′ is undefined. Then evaluate the second derivative at points where f′(x)=0f'(x)=0f′(x)=0. A nonzero value classifies the point. For f(x)=x3−3xf(x)=x^3-3xf(x)=x3−3x, both stationary points can be classified this way. Report the point's coordinates when asked for a local maximum or minimum on the graph.

Worked example

Classify two stationary points

Find and classify the stationary points of f(x)=x3−3xf(x)=x^3-3xf(x)=x3−3x.
  1. 1
    f′(x)=3x2−3=0f'(x)=3x^2-3=0f′(x)=3x2−3=0, so x=−1x=-1x=−1 or x=1x=1x=1.
  2. 2
    f′′(x)=6xf''(x)=6xf′′(x)=6x.
  3. 3
    f′′(−1)=−6<0f''(-1)=-6<0f′′(−1)=−6<0 and f(−1)=2f(-1)=2f(−1)=2; this gives a local maximum.
  4. 4
    f′′(1)=6>0f''(1)=6>0f′′(1)=6>0 and f(1)=−2f(1)=-2f(1)=−2; this gives a local minimum.

Answer: Local maximum at (−1,2)(-1,2)(−1,2) and local minimum at (1,−2)(1,-2)(1,−2).

Figure 1. The curve bends downward at the higher marked point and upward at the lower one.

Key terms · tap one for its definition

critical point

A critical point occurs at a domain value where the first derivative is zero or does not exist.

second derivative

The second derivative, f′′f''f′′, is the derivative of f′f'f′.

Part 2 done

Quick check

One question on the part you just read

Easy

At a stationary point x=cx=cx=c, which condition in the second derivative test indicates a local maximum?
Show answer and explanation

Answer: D · Worked explanation

At a stationary point, f′(c)=0f'(c)=0f′(c)=0. A negative second derivative means the graph bends downward near ccc, indicating a local maximum. A positive second derivative instead indicates a local minimum; a zero second derivative leaves the test inconclusive.
3

Part 3 of 4: A zero second derivative leaves the result undecided

If f′(c)=0f'(c)=0f′(c)=0 but f′′(c)=0f''(c)=0f′′(c)=0, the test is inconclusive. The point might be a maximum, a minimum, or neither. For f(x)=x4f(x)=x^4f(x)=x4, zero is a local minimum because nearby outputs are positive. For g(x)=−x4g(x)=-x^4g(x)=−x4, zero is a local maximum. For h(x)=x3h(x)=x^3h(x)=x3, zero is neither: values below and above zero occur arbitrarily close to it. All three functions have first and second derivatives equal to zero at zero.

Common mistake

A zero second derivative does not mean there is no extremum. It means this test cannot decide.

Key terms · tap one for its definition

inconclusive

An inconclusive test result does not determine whether a stationary point is a maximum, minimum, or neither.

neither

A critical point is neither when it is not a local maximum or a local minimum.

Part 3 done

4

Part 4 of 4: Other critical points need a different check

A nondifferentiable critical point also lies outside the second derivative test because f′(c)f'(c)f′(c) does not exist. For example, f(x)=∣x∣f(x)=|x|f(x)=∣x∣ has a local minimum at zero, but its first derivative is undefined there. When the test cannot decide, compare nearby function values or check the sign of f′f'f′ on each side. If fff is continuous at the point, a change in f′f'f′ from negative to positive gives a local minimum. If fff is continuous at the point, a change from positive to negative gives a local maximum. If fff is continuous at the point and the sign does not change, the point is neither.

This extra check classifies the point. It does not change an inconclusive second derivative result into a conclusive one.

Key term

nondifferentiable critical point

A nondifferentiable critical point lies in the function's domain where its first derivative does not exist.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the second derivative test when f′(c)=0f'(c)=0f′(c)=0.

    Show mark schemeHide mark scheme

    Model answer

    If f′′(c)>0f''(c)>0f′′(c)>0, f(c)f(c)f(c) is a local minimum. If f′′(c)<0f''(c)<0f′′(c)<0, f(c)f(c)f(c) is a local maximum.

    • 1 mark for stating that a positive second derivative gives a local minimum
    • 1 mark for stating that a negative second derivative gives a local maximum
  2. 2.Calculate[3 marks]

    Find and classify the stationary points of f(x)=x3−3xf(x)=x^3-3xf(x)=x3−3x.

    Show mark schemeHide mark scheme

    Model answer

    f′(x)=3x2−3=0f'(x)=3x^2-3=0f′(x)=3x2−3=0 gives x=−1,1x=-1,1x=−1,1. Since f′′(x)=6xf''(x)=6xf′′(x)=6x, (−1,2)(-1,2)(−1,2) is a local maximum and (1,−2)(1,-2)(1,−2) is a local minimum.

    • 1 mark for solving f′(x)=0f'(x)=0f′(x)=0 to obtain x=−1x=-1x=−1 and x=1x=1x=1
    • 1 mark for using f′′(−1)<0f''(-1)<0f′′(−1)<0 to identify the local maximum at (−1,2)(-1,2)(−1,2)
    • 1 mark for using f′′(1)>0f''(1)>0f′′(1)>0 to identify the local minimum at (1,−2)(1,-2)(1,−2)
  3. 3.Explain[2 marks]

    Explain why f′′(c)=0f''(c)=0f′′(c)=0 cannot classify a stationary point.

    Show mark schemeHide mark scheme

    Model answer

    A zero second derivative makes the test inconclusive. Such a point may be a local maximum, a local minimum, or neither.

    • 1 mark for stating that the second derivative test is inconclusive when f′′(c)=0f''(c)=0f′′(c)=0
    • 1 mark for recognizing that a maximum, minimum, or neither remains possible
  4. 4.Determine[3 marks]

    Determine whether zero is a local extremum of h(x)=x3h(x)=x^3h(x)=x3, and explain your answer.

    Show mark schemeHide mark scheme

    Model answer

    h′(0)=0h'(0)=0h′(0)=0 and h′′(0)=0h''(0)=0h′′(0)=0, so the second derivative test is inconclusive. Nearby values on opposite sides of zero have opposite signs. Therefore, zero is neither a local maximum nor a local minimum.

    • 1 mark for finding that h′(0)=0h'(0)=0h′(0)=0
    • 1 mark for finding that h′′(0)=0h''(0)=0h′′(0)=0 and recognizing the test is inconclusive
    • 1 mark for using nearby values on both sides to conclude that zero is neither
  5. 5.Explain[2 marks]

    Explain why the second derivative test does not classify f(x)=∣x∣f(x)=|x|f(x)=∣x∣ at zero.

    Show mark schemeHide mark scheme

    Model answer

    The first derivative does not exist at zero, so the second derivative test does not apply. Zero is still a local minimum because nearby function values are greater than or equal to zero.

    • 1 mark for stating that f′(0)f'(0)f′(0) does not exist, so the test does not apply
    • 1 mark for identifying zero as a local minimum from nearby function values

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A function has a stationary point at x=3x=3x=3, and f′′(3)=8f''(3)=8f′′(3)=8. What does the second derivative test conclude?
Show answer and explanation

Answer: D · Worked explanation

Since the point is stationary and f′′(3)=8>0f''(3)=8>0f′′(3)=8>0, the graph bends upward there, so the point is a local minimum. A local maximum would require a negative second derivative. The test is inconclusive only when the second derivative is zero (or when its required conditions do not apply).
3.

Easy·Identify[1 mark]

At a stationary point x=cx=cx=c, the second derivative test gives f′′(c)=0f''(c)=0f′′(c)=0. Which conclusion is justified by this result alone?
Show answer and explanation

Answer: C · Worked explanation

When f′(c)=0f'(c)=0f′(c)=0 and f′′(c)=0f''(c)=0f′′(c)=0, the second derivative test does not determine the local behavior. A stationary point with this result can be a local maximum, a local minimum, or neither. In particular, a zero second derivative does not by itself show that there is no extremum.
4.

Medium·Determine[2 marks]

A function has stationary points at x=−2x=-2x=−2 and x=4x=4x=4. Its second derivative has values f′′(−2)=5f''(-2)=5f′′(−2)=5 and f′′(4)=−3f''(4)=-3f′′(4)=−3. Classify both points using the second derivative test.
Show answer and explanation

Answer: D · Worked explanation

At x=−2x=-2x=−2, f′′(−2)=5>0f''(-2)=5>0f′′(−2)=5>0, so the stationary point is a local minimum. At x=4x=4x=4, f′′(4)=−3<0f''(4)=-3<0f′′(4)=−3<0, so it is a local maximum. The tempting reversal assigns downward bending to a minimum and upward bending to a maximum, opposite to the second derivative test.
5.

Medium·Calculate[2 marks]

For f(x)=x2+6x+1f(x)=x^2+6x+1f(x)=x2+6x+1, calculate and classify the stationary point using the second derivative test.
Show answer and explanation

Answer: B · Worked explanation

Differentiate to get f′(x)=2x+6f'(x)=2x+6f′(x)=2x+6, so the stationary point occurs at x=−3x=-3x=−3. Then f′′(x)=2>0f''(x)=2>0f′′(x)=2>0, indicating a local minimum, and f(−3)=9−18+1=−8f(-3)=9-18+1=-8f(−3)=9−18+1=−8. The tempting local-maximum classification reverses the meaning of a positive second derivative.
6.

Medium·Classify[2 marks]

A stationary point of a function occurs at x=2x=2x=2. Given f′′(2)=−12f''(2)=-12f′′(2)=−12 and f(2)=7f(2)=7f(2)=7, identify the point on the graph and its classification.
Show answer and explanation

Answer: B · Worked explanation

The point on the graph has coordinates (2,7)(2,7)(2,7) because its input is 2 and its output is 7. Since f′′(2)=−12<0f''(2)=-12<0f′′(2)=−12<0 at a stationary point, the second derivative test identifies a local maximum. The point’s positive function value does not determine whether it is a maximum or a minimum.
7.

Medium·Determine[2 marks]

For f(x)=x3−6x2+9xf(x)=x^3-6x^2+9xf(x)=x3−6x2+9x, determine the classification of the stationary point with the smaller xxx-coordinate.
Show answer and explanation

Answer: B · Worked explanation

Here f′(x)=3x2−12x+9=3(x−1)(x−3)f'(x)=3x^2-12x+9=3(x-1)(x-3)f′(x)=3x2−12x+9=3(x−1)(x−3), so the stationary points are at x=1x=1x=1 and x=3x=3x=3. Since f′′(x)=6x−12f''(x)=6x-12f′′(x)=6x−12, we have f′′(1)=−6<0f''(1)=-6<0f′′(1)=−6<0, giving a local maximum; also f(1)=4f(1)=4f(1)=4. The tempting minimum classification at x=1x=1x=1 reverses the implication of a negative second derivative.
8.

Hard·Determine[2 marks]

A function has f′(x)=(x+1)(x−3)f'(x)=(x+1)(x-3)f′(x)=(x+1)(x−3) and f(0)=2f(0)=2f(0)=2. Determine the local extrema, including their coordinates.
Show answer and explanation

Answer: D · Worked explanation

Integrating f′(x)=x2−2x−3f'(x)=x^2-2x-3f′(x)=x2−2x−3 gives f(x)=x3/3−x2−3x+Cf(x)=x^3/3-x^2-3x+Cf(x)=x3/3−x2−3x+C. Since f(0)=2f(0)=2f(0)=2, we have C=2C=2C=2, so f(−1)=11/3f(-1)=11/3f(−1)=11/3 and f(3)=−7f(3)=-7f(3)=−7. Also, f′′(x)=2x−2f''(x)=2x-2f′′(x)=2x−2 is negative at -1 and positive at 3, giving a local maximum and a local minimum, respectively.
9.

Hard·Deduce[2 marks]

A function is continuous near x=0x=0x=0 and has f′(0)=f′′(0)=0f'(0)=f''(0)=0f′(0)=f′′(0)=0. For small nonzero xxx, f′(x)<0f'(x)<0f′(x)<0 when x<0x<0x<0 and f′(x)>0f'(x)>0f′(x)>0 when x>0x>0x>0. What can be deduced?
Show answer and explanation

Answer: A · Worked explanation

Because f′(0)=0f'(0)=0f′(0)=0 and f′′(0)=0f''(0)=0f′′(0)=0, the second derivative test itself is inconclusive. Independently, f′f'f′ changes from negative to positive, so the function decreases before zero and increases after it; continuity then gives a local minimum at zero. The tempting conclusion that the point is neither confuses an inconclusive test with a classification of the point.
10.

Hard·Compare[2 marks]

Three functions have stationary points at x=0x=0x=0 with f′′(0)=0f''(0)=0f′′(0)=0. Nearby values show that function PPP is greater than P(0)P(0)P(0) on both sides, function QQQ is less than Q(0)Q(0)Q(0) on both sides, and function RRR takes values both above and below R(0)R(0)R(0) arbitrarily close to zero. Which classification is correct?
Show answer and explanation

Answer: C · Worked explanation

Since PPP is greater than its value at zero on both sides, zero is a local minimum of PPP. Since QQQ is less on both sides, zero is a local maximum of QQQ; the two-sided values for RRR show it is neither. In all three cases the second derivative test remains inconclusive because f′′(0)=0f''(0)=0f′′(0)=0, even when nearby values settle the classification.

Keep going

Next topic5.8 Sketching functions and their derivativesPrevious topic5.6 Concavity

More in Unit 5 · Analytical Applications of Differentiation

  1. 5.3Increasing and decreasing intervalsNotes · 10 questions
  2. 5.4First derivative testNotes · 10 questions
  3. 5.5Candidates testNotes · 10 questions
  4. 5.6ConcavityNotes · 10 questions
  5. 5.7Second derivative testNotes · 10 questions
  6. 5.8Sketching functions and their derivativesNotes · 10 questions
  7. 5.9Connecting f, f' and f''Notes · 10 questions
  8. 5.10Introduction to optimizationNotes · 10 questions
  9. 5.11Solving optimization problemsNotes · 10 questions

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1The second derivative identifies some local extrema
  2. 2Calculate the second derivative at each stationary point
  3. 3A zero second derivative leaves the result undecided
  4. 4Other critical points need a different check
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Two stationary points on a cubic

y-4-3-2-101234-4-2024x
  • y = x³ − 3x
  • (−1, 2)
  • (1, −2)