Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›3 Properties of Substances and Mixtures
  4. ›3.3 Solids, liquids and gases

AP Chemistry · Unit 3 · Properties of Substances and Mixtures

3.3 Solids, liquids and gases

Distinguish solids, liquids, and gases by particle arrangement, and explain how temperature, pressure, and energy changes affect them.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Particle spacing and motion distinguish the three states
  1. 1Particle spacing and motion distinguish the three states
  2. 2Temperature changes motion and can change a substance’s state
  3. 3Pressure changes particle spacing and the conditions for phase changes
  4. 4Changes of state rearrange particles without changing their identity
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Particle spacing and motion distinguish the three states

In a solid, particles stay close together in relatively fixed positions. They vibrate but do not move freely past one another. In a liquid, particles remain close but move past their neighbors. A liquid keeps nearly the same volume while taking its container’s shape. In a gas, particles are far apart and move throughout the available space. A gas has no fixed shape or volume.

Figure 1. Compare particle spacing and freedom of movement. Each panel shows the same number of particles.

Common mistake

Particles in a solid are not motionless. They vibrate around relatively fixed positions.

These arrangements explain why solids and liquids are difficult to compress. Gas particles have much more empty space between them, so gases compress readily. State describes particle behavior, not whether the particles are atoms, molecules, or ions.

Key terms · tap one for its definition

solid

A solid has a fixed shape and volume because its particles remain close to relatively fixed positions.

liquid

A liquid has a nearly fixed volume but takes its container’s shape as close particles move past one another.

gas

A gas fills its container because widely separated particles move throughout the available space.

Part 1 done

2

Part 2 of 4: Temperature changes motion and can change a substance’s state

Temperature reflects the average kinetic energy of a substance’s particles. Heating a substance within one state generally raises its temperature. Its particles move or vibrate more vigorously. Cooling generally has the opposite effect. At a suitable pressure, enough heating can change a solid into a liquid or a liquid into a gas.

During a state change, added or removed energy changes particle separation and arrangement. For a pure substance changing state at constant pressure, temperature stays constant during the change. The energy does not raise average kinetic energy until the change is complete.

Common mistake

Heating during melting does not necessarily raise temperature. The supplied energy changes the state while both states are present.

Key term

temperature

Temperature reflects the average kinetic energy of a substance’s particles.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the state in which particles remain close together but can move past neighboring particles, allowing the substance to flow while retaining nearly the same volume.
Show answer and explanation

Answer: D · Worked explanation

A liquid’s particles remain close together, but they can move past one another, so a liquid flows and keeps nearly the same volume. A solid also has close particles, but they vibrate around relatively fixed positions rather than moving freely past neighbors.
3

Part 3 of 4: Pressure changes particle spacing and the conditions for phase changes

Pressure strongly affects gases because their particles are widely separated. Increasing external pressure can push gas particles closer together, reducing gas volume. Liquids and solids change volume much less because their particles are already close. Pressure can also affect which state is stable at a given temperature.

A liquid boils when its vapor pressure equals the surrounding pressure. Lower surrounding pressure therefore lowers its boiling temperature. Higher surrounding pressure raises it. Compressing a gas can favor condensation, but pressure alone does not guarantee it. The outcome also depends on temperature and the substance.

Exam tip

When explaining boiling, compare vapor pressure with surrounding pressure. Do not describe boiling only as particles moving faster.

Key term

pressure

Pressure is force per unit area exerted on a surface.

Part 3 done

4

Part 4 of 4: Changes of state rearrange particles without changing their identity

In melting, a solid gains energy and becomes a liquid. Its particles can then move past one another. In vaporization, a liquid gains energy and becomes a gas. Its particles spread much farther apart. Condensation reverses vaporization, while freezing reverses melting. Gas particles can also form a solid directly through deposition. The reverse change, from solid to gas, is sublimation.

Melting, vaporization, and sublimation absorb energy. Freezing, condensation, and deposition release energy. Energy changes particle arrangement and the interactions between particles. It does not change the chemical identity of the substance. Evaporation is vaporization at a liquid’s surface and can occur below the boiling temperature.

Key terms · tap one for its definition

melting

Melting is the change from solid to liquid as the substance absorbs energy.

vaporization

Vaporization is the change from liquid to gas as the substance absorbs energy.

condensation

Condensation is the change from gas to liquid as the substance releases energy.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Compare[3 marks]

    Compare particle arrangement and motion in solids, liquids, and gases.

    Show mark schemeHide mark scheme

    Model answer

    Solid particles are close and vibrate around relatively fixed positions. Liquid particles remain close but move past one another. Gas particles are far apart and move throughout their container.

    • 1 mark for describing close solid particles vibrating around relatively fixed positions
    • 1 mark for describing close liquid particles moving past one another
    • 1 mark for describing widely separated gas particles moving throughout their container
  2. 2.Explain[2 marks]

    Explain why a gas compresses more readily than a liquid.

    Show mark schemeHide mark scheme

    Model answer

    Gas particles have much more empty space between them. Liquid particles are already close together, so their spacing changes much less under pressure.

    • 1 mark for identifying substantial empty space between gas particles
    • 1 mark for explaining that liquid particles are already close together
  3. 3.Explain[3 marks]

    Explain what happens to particle motion and temperature during melting at constant pressure.

    Show mark schemeHide mark scheme

    Model answer

    The solid absorbs energy, allowing particles to move past one another. For a pure substance, temperature stays constant during melting because the energy changes particle arrangement rather than average kinetic energy.

    • 1 mark for stating that the substance absorbs energy
    • 1 mark for explaining that particles gain the freedom to move past one another
    • 1 mark for stating that temperature stays constant as energy changes arrangement rather than average kinetic energy
  4. 4.Predict[2 marks]

    Predict how lowering surrounding pressure affects a liquid’s boiling temperature. Explain why.

    Show mark schemeHide mark scheme

    Model answer

    The boiling temperature decreases. At a lower surrounding pressure, the liquid’s vapor pressure can equal it at a lower temperature.

    • 1 mark for predicting a lower boiling temperature
    • 1 mark for explaining that vapor pressure equals the lower surrounding pressure at a lower temperature
  5. 5.Describe[2 marks]

    Describe condensation using particle spacing and energy transfer.

    Show mark schemeHide mark scheme

    Model answer

    A gas releases energy and becomes a liquid. Its particles move much closer together.

    • 1 mark for stating that the substance releases energy as gas becomes liquid
    • 1 mark for describing particles moving much closer together

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A sample fills its container and has particles that are widely separated and move throughout the available space. Identify its state.
Show answer and explanation

Answer: A · Worked explanation

Widely separated particles that move throughout the available space characterize a gas, which has no fixed shape or volume. A liquid takes its container’s shape but retains nearly the same volume, so it does not fill all available space in the same way.
3.

Easy·State[1 mark]

State what an increase in temperature generally indicates about the average kinetic energy of a substance’s particles.
Show answer and explanation

Answer: C · Worked explanation

Temperature reflects the average kinetic energy of a substance’s particles, so an increase in temperature generally means that average kinetic energy has increased. During a state change at constant pressure, however, added energy can change particle arrangement while temperature stays constant.
4.

Easy·Identify[1 mark]

Identify the change of state that occurs when a gas becomes a solid directly, without first becoming a liquid.
Show answer and explanation

Answer: B · Worked explanation

Deposition is the direct change from gas to solid. Sublimation is the reverse process, in which a solid changes directly to a gas; condensation changes a gas into a liquid, and freezing changes a liquid into a solid.
5.

Medium·Predict[1 mark]

A gas sample is compressed while its temperature is held constant. Predict the immediate effect on the spacing of its particles.
Show answer and explanation

Answer: C · Worked explanation

Compressing a gas reduces the volume available to its widely separated particles, so their average spacing decreases. Compression does not by itself make particles stop moving or place them in the relatively fixed arrangement characteristic of a solid.
6.

Medium·Determine[1 mark]

A liquid absorbs energy as it changes into a gas. Determine what happens to particle spacing and energy transfer during this change.
Show answer and explanation

Answer: B · Worked explanation

Vaporization changes a liquid into a gas, so particles spread much farther apart, and the substance absorbs energy. The option saying particles move closer together describes the direction of condensation, which releases energy rather than absorbing it.
7.

Medium·Deduce[2 marks]

A pure substance is observed at constant pressure while it changes from solid to liquid. Its temperature reading remains unchanged even as energy enters the sample. Deduce where the incoming energy is going during this interval.
Show answer and explanation

Answer: A · Worked explanation

During melting at constant pressure, the temperature of a pure substance stays constant, so its average kinetic energy does not increase during the change. The incoming energy changes particle arrangement and interactions as particles gain the freedom to move past one another; it does not change the substance’s chemical identity.
8.

Medium·Explain[2 marks]

At the same temperature, a liquid is placed in two sealed containers with different external pressures. Explain which container has the higher boiling temperature, assuming the pressure on the liquid’s surface is higher in one container.
Show answer and explanation

Answer: C · Worked explanation

A liquid boils when its vapor pressure equals the surrounding pressure. The liquid under higher surrounding pressure must reach a higher vapor pressure, which occurs at a higher temperature; the tempting claim that temperature alone determines boiling overlooks the effect of surrounding pressure.
9.

Hard·Deduce[2 marks]

A gas in a sealed container is compressed, and the container is then cooled. Which deduction best describes whether the gas must condense?
Show answer and explanation

Answer: A · Worked explanation

Compression can push gas particles closer together and favor condensation, while cooling can also affect the state. However, pressure alone does not guarantee condensation: the outcome depends on temperature and the substance as well. Thus neither inevitable condensation nor inevitable persistence as a gas follows from the information given.
10.

Hard·Compare[2 marks]

A sample of a substance changes directly from solid to gas in one process and from gas to solid in another. Compare the energy transfer in the two processes.
Show answer and explanation

Answer: D · Worked explanation

A direct change from solid to gas is sublimation, which absorbs energy; the reverse, deposition, releases energy. The tempting idea that both changes absorb energy because particles rearrange ignores the direction of the change: moving to the more widely separated gas state requires energy, while the reverse releases it.

Keep going

Next topic3.4 Ideal gas lawPrevious topic3.2 Properties of solids

More in Unit 3 · Properties of Substances and Mixtures

  1. 3.1Intermolecular forcesNotes · 10 questions
  2. 3.2Properties of solidsNotes · 10 questions
  3. 3.3Solids, liquids and gasesNotes · 10 questions
  4. 3.4Ideal gas lawNotes · 10 questions
  5. 3.5Kinetic molecular theoryNotes · 10 questions
  6. 3.6Deviation from ideal gas lawNotes · 10 questions
  7. 3.7Solutions and mixturesNotes · 10 questions
  8. 3.8Representations of solutionsNotes · 10 questions
  9. 3.9Separation of solutions and mixturesNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Particle spacing and motion distinguish the three states
  2. 2Temperature changes motion and can change a substance’s state
  3. 3Pressure changes particle spacing and the conditions for phase changes
  4. 4Changes of state rearrange particles without changing their identity
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe