Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›3 Properties of Substances and Mixtures
  4. ›3.9 Separation of solutions and mixtures

AP Chemistry · Unit 3 · Properties of Substances and Mixtures

3.9 Separation of solutions and mixtures

Describe separation methods, explain the properties they use, and choose suitable methods for mixtures.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Physical differences let mixtures separate without changing their substances
  1. 1Physical differences let mixtures separate without changing their substances
  2. 2Boiling and condensation separate liquids from dissolved substances
  3. 3Unequal attractions separate dissolved components during chromatography
  4. 4The mixture and desired product determine the best sequence
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Physical differences let mixtures separate without changing their substances

A mixture contains substances that retain their chemical identities. Physical separation sorts those substances without converting them into new substances. The method depends on a useful difference between components, such as particle size, boiling point, or attraction to a material. A method may separate only part of a mixture. Further steps can then isolate another component.

First, identify which components are dissolved and which are suspended. Then decide what must be collected: a solid, a liquid, or both. Filtration separates an insoluble solid from a liquid. The liquid and dissolved substances pass through the filter as filtrate. Solid particles too large to pass through remain as residue.

Common mistake

A filter does not remove dissolved salt from water. Dissolved particles pass through an ordinary filter with the water.

Key terms · tap one for its definition

Physical separation

Physical separation isolates components of a mixture without changing their chemical identities.

Filtration

Filtration separates an insoluble solid from a fluid using a barrier that allows the fluid to pass.

Part 1 done

2

Part 2 of 4: Boiling and condensation separate liquids from dissolved substances

Distillation heats a mixture and condenses its vapor into a collected liquid. It separates components when their volatilities differ enough. To collect water from a salt solution, heat the solution. Water vapor enters a cooled condenser and becomes liquid again. The nonvolatile salt remains in the heated container. Distillation can therefore recover the solvent, rather than just remove it.

Evaporation removes a volatile solvent without collecting it. It can leave a dissolved solid behind. For a mixture of liquids, distillation works best when their boiling points differ substantially. If boiling points are close, fractional distillation provides repeated vaporization and condensation. Neither method guarantees complete separation when components vaporize together.

Figure 1. Water vapor travels to the condenser and becomes liquid. Salt remains in the heated container.

Key terms · tap one for its definition

Distillation

Distillation separates a volatile component by vaporizing it and condensing the vapor for collection.

Evaporation

Evaporation removes a liquid as vapor without collecting the vapor as a separate liquid.

Part 2 done

Quick check

One question on the part you just read

Easy

A student filters a mixture of water and powdered chalk. Which substance should remain as the residue on the filter?
Show answer and explanation

Answer: D · Worked explanation

Powdered chalk is an insoluble solid, so its particles are retained by the filter as residue while the water passes through. Water vapor would be produced by heating, not filtration. The option “dissolved chalk particles” is also unsuitable because the chalk in this mixture is suspended, not dissolved.
3

Part 3 of 4: Unequal attractions separate dissolved components during chromatography

Chromatography separates components by their different attractions to two phases. The mobile phase moves through or past a stationary phase. Components that spend more time in the mobile phase usually travel farther. Components attracted more strongly to the stationary phase usually travel less far.

In paper chromatography, a solvent carries dissolved substances along paper. A mixture of dyes can produce separate spots if its dyes move different distances. Solvent extraction uses a different property: unequal solubility in two liquids that do not mix. A component transfers preferentially into the liquid where it is more soluble. The liquid layers can then be separated.

Exam tip

Name the differing physical property when choosing a method. For chromatography, explain attraction to both phases rather than saying substances have different weights.

Key terms · tap one for its definition

Chromatography

Chromatography separates components through differences in their attraction to a moving phase and a stationary phase.

Solvent extraction

Solvent extraction transfers a substance into a liquid in which it is more soluble.

Part 3 done

4

Part 4 of 4: The mixture and desired product determine the best sequence

Choose a method by matching the components to a physical difference. Use filtration for sand suspended in salt water. Next, distill the filtrate if you need both water and salt. Evaporate it instead if you only need the salt. These steps work because sand is insoluble, while water is volatile.

Decantation separates a settled solid from a liquid by carefully pouring off the liquid. It can also separate layers of immiscible liquids. Centrifugation speeds up the settling of suspended particles, but it does not remove dissolved substances. For dissolved dyes with different attractions to a stationary phase, use chromatography. For a dissolved substance that favors one of two immiscible liquids, use solvent extraction.

Common mistake

Settling or centrifugation does not turn dissolved particles into a removable solid. Use a method suited to dissolved components.

Key term

Decantation

Decantation separates a liquid by pouring it away from a settled solid or another liquid layer.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain why filtration separates sand from salt water but does not separate dissolved salt from water.

    Show mark schemeHide mark scheme

    Model answer

    Sand is an insoluble solid whose particles remain on the filter. Water passes through, carrying the dissolved salt with it.

    • 1 mark for identifying sand as an insoluble solid
    • 1 mark for stating that sand particles remain on the filter
    • 1 mark for stating that dissolved salt passes through with the water
  2. 2.Describe[3 marks]

    Describe how distillation can recover water from a salt solution.

    Show mark schemeHide mark scheme

    Model answer

    Heat the solution so water vaporizes. Cool the vapor in a condenser to collect liquid water. Salt remains in the heated container.

    • 1 mark for heating the solution to vaporize water
    • 1 mark for cooling the vapor to collect liquid water
    • 1 mark for stating that salt remains in the heated container
  3. 3.Explain[2 marks]

    Explain why two dyes can travel different distances in paper chromatography.

    Show mark schemeHide mark scheme

    Model answer

    The dyes have different attractions to the moving solvent and stationary paper. The dye spending more time in the moving solvent travels farther.

    • 1 mark for linking separation to different attractions to the mobile and stationary phases
    • 1 mark for stating that greater time in the mobile phase generally means farther travel
  4. 4.Justify[3 marks]

    Justify a sequence that recovers both water and salt from a mixture of sand and salt water.

    Show mark schemeHide mark scheme

    Model answer

    Filter first because insoluble sand remains on the filter. Distill the filtrate because water vaporizes and can be condensed for collection. Salt remains behind.

    • 1 mark for choosing filtration to remove insoluble sand
    • 1 mark for choosing distillation to vaporize and collect water
    • 1 mark for stating that salt remains after the water is distilled
  5. 5.Compare[2 marks]

    Compare distillation and evaporation when separating a dissolved solid from its solvent.

    Show mark schemeHide mark scheme

    Model answer

    Both can leave the dissolved solid behind as solvent vaporizes. Distillation condenses and collects the solvent; evaporation does not.

    • 1 mark for stating that both methods can leave the dissolved solid behind
    • 1 mark for distinguishing distillation by its collection of condensed solvent

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

Which method separates a liquid from a settled solid by carefully pouring off the liquid?
Show answer and explanation

Answer: C · Worked explanation

Decantation separates a liquid by pouring it away from a solid that has settled, or from another liquid layer. Distillation instead vaporizes and condenses a component, while chromatography separates components through differences in attraction to two phases. Solvent extraction relies on unequal solubility in two liquids that do not mix.
3.

Easy·Identify[1 mark]

In paper chromatography, a dye moves farther than another dye under the same conditions. Which explanation best accounts for this difference?
Show answer and explanation

Answer: D · Worked explanation

A component that spends more time in the mobile phase is carried farther as that phase moves. A dye attracted more strongly to the stationary phase tends to travel less far. Greater mass and boiling point are not the properties that explain the different travel distances in this chromatography setup.
4.

Easy·Choose[1 mark]

Which technique is most appropriate for separating two liquid layers that do not mix?
Show answer and explanation

Answer: A · Worked explanation

Immiscible liquids form separate layers, which can be separated by carefully pouring one layer away from the other. Filtration is suited to an insoluble solid suspended in a fluid, not two liquid layers. Evaporation and paper chromatography do not directly separate immiscible layers in this way.
5.

Medium·Choose[1 mark]

A solution contains a dissolved blue dye and a dissolved yellow dye. The dyes have different attractions to the paper and to a suitable moving solvent. Which method is best for separating them into distinct spots?
Show answer and explanation

Answer: C · Worked explanation

Paper chromatography can separate dissolved dyes when they differ in their attractions to the mobile solvent and stationary paper, causing them to travel different distances. Filtration, decantation, and centrifugation are not effective for separating substances that remain dissolved in a solution; they do not selectively retain or settle dissolved dye molecules.
6.

Medium·Explain[2 marks]

A mixture contains two liquids with boiling points of 64 °C64\,\text{°C}64°C and 66 °C66\,\text{°C}66°C. Why is fractional distillation more suitable than simple distillation for separating them?
Show answer and explanation

Answer: D · Worked explanation

The boiling points differ by only 2 °C2\,\text{°C}2°C, so the liquids can vaporize together to a significant extent. Fractional distillation provides repeated vaporization and condensation, improving their separation. The tempting idea that the higher-boiling liquid is trapped by a filter is wrong: separation depends on volatility, not filtration, and heating does not make the liquids chemically different.
7.

Medium·Determine[1 mark]

A student needs to recover only the dissolved solid from a solution and does not need to collect the solvent. Which method best matches that goal?
Show answer and explanation

Answer: B · Worked explanation

Evaporation removes the volatile solvent as vapor and can leave the dissolved solid behind, which matches the stated goal. Distillation is more appropriate when the solvent vapor is to be condensed and collected. Filtration cannot remove a dissolved solid, and chromatography is not the direct method for recovering a bulk dissolved solid from its solvent.
8.

Medium·Choose[2 marks]

A liquid sample contains suspended clay particles that settle slowly. A lab has a centrifuge and ordinary filters. Which sequence is most appropriate to obtain a clearer liquid quickly?
Show answer and explanation

Answer: B · Worked explanation

Centrifugation speeds the settling of suspended clay particles, after which the clearer liquid can be poured off by decantation. Evaporating and filtering vapor is not a suitable sequence for removing suspended particles. Distillation could separate a volatile liquid, but it is unnecessary for this goal and does not make centrifugation of the collected liquid useful.
9.

Medium·Calculate[2 marks]

In a solvent-extraction test, a solute has a concentration of 8.0 g/L8.0\,\text{g/L}8.0g/L in liquid A and 2.0 g/L2.0\,\text{g/L}2.0g/L in immiscible liquid B at equilibrium. Which liquid contains the greater amount of solute per liter, and by what factor?
Show answer and explanation

Answer: C · Worked explanation

Compare the concentrations by dividing: 8.0 g/L÷2.0 g/L=48.0\,\text{g/L} \div 2.0\,\text{g/L} = 48.0g/L÷2.0g/L=4. Thus, each liter of liquid A contains four times as much solute as each liter of liquid B. The factor of 6 comes from subtracting the concentrations, but a difference is not the requested factor.
10.

Hard·Determine[2 marks]

A mixture contains gravel, suspended fine sand, and dissolved sugar in water. A student wants a clear sugar solution and then wants to recover the sugar, but does not need the water. Which sequence best achieves both goals?
Show answer and explanation

Answer: A · Worked explanation

Filtration removes the insoluble gravel and suspended fine sand, leaving the dissolved sugar in the filtrate. Evaporating that filtrate removes the water and leaves the sugar, which is the desired product. Decantation cannot remove dissolved sugar, and centrifugation does not separate dissolved substances from the water.

Keep going

Next topic3.10 SolubilityPrevious topic3.8 Representations of solutions

More in Unit 3 · Properties of Substances and Mixtures

  1. 3.5Kinetic molecular theoryNotes · 10 questions
  2. 3.6Deviation from ideal gas lawNotes · 10 questions
  3. 3.7Solutions and mixturesNotes · 10 questions
  4. 3.8Representations of solutionsNotes · 10 questions
  5. 3.9Separation of solutions and mixturesNotes · 10 questions
  6. 3.10SolubilityNotes · 10 questions
  7. 3.11Spectroscopy and the electromagnetic spectrumNotes · 10 questions
  8. 3.12Properties of photonsNotes · 10 questions
  9. 3.13Beer-Lambert lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Physical differences let mixtures separate without changing their substances
  2. 2Boiling and condensation separate liquids from dissolved substances
  3. 3Unequal attractions separate dissolved components during chromatography
  4. 4The mixture and desired product determine the best sequence
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe