Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›7 Equilibrium
  4. ›7.11 Introduction to solubility equilibria

AP Chemistry · Unit 7 · Equilibrium

7.11 Introduction to solubility equilibria

Define solubility equilibrium, write KspK_{sp}Ksp​ expressions, and explain what KspK_{sp}Ksp​ reveals about solubility.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A slightly soluble salt reaches a dynamic equilibrium
  1. 1A slightly soluble salt reaches a dynamic equilibrium
  2. 2Ion concentrations determine the solubility product expression
  3. 3Equilibrium ion concentrations give a value for Ksp
  4. 4Ksp describes equilibrium but needs careful interpretation
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A slightly soluble salt reaches a dynamic equilibrium

A slightly soluble salt dissolves only to a limited extent in water. Its solid releases ions into solution. At the same time, dissolved ions can join the solid again. In a closed system, solubility equilibrium occurs when these opposing processes have equal rates. The ion concentrations then remain constant, although both processes continue.

For example, silver chloride reaches the equilibrium AgCl(s)⇌Ag+(aq)+Cl−(aq)\mathrm{AgCl(s)\rightleftharpoons Ag^+(aq)+Cl^-(aq)}AgCl(s)⇌Ag+(aq)+Cl−(aq). A saturated solution contains the equilibrium maximum dissolved amount at that temperature; undissolved solid may remain. Adding more solid does not increase the equilibrium ion concentrations.

Common mistake

Equilibrium does not mean dissolution stops. Ions continue leaving and rejoining the solid at equal rates.

Figure 1. Ions leave and rejoin the solid. Equal rates keep dissolved ion concentrations constant.

Key terms · tap one for its definition

slightly soluble salt

A slightly soluble salt dissolves to a limited extent in water and can leave undissolved solid.

solubility equilibrium

Solubility equilibrium occurs when ions leave a solid and rejoin it at equal rates.

Part 1 done

2

Part 2 of 4: Ion concentrations determine the solubility product expression

The solubility product constant, KspK_{sp}Ksp​, is the equilibrium constant for a salt dissolving into its ions. Write a balanced dissolution equation first. Then multiply the equilibrium ion concentrations, raising each to its coefficient. Do not include the solid in the expression.

For AgCl(s)⇌Ag+(aq)+Cl−(aq)\mathrm{AgCl(s)\rightleftharpoons Ag^+(aq)+Cl^-(aq)}AgCl(s)⇌Ag+(aq)+Cl−(aq), Ksp=[Ag+][Cl−]K_{sp}=[\mathrm{Ag^+}][\mathrm{Cl^-}]Ksp​=[Ag+][Cl−]. For CaF2(s)⇌Ca2+(aq)+2F−(aq)\mathrm{CaF_2(s)\rightleftharpoons Ca^{2+}(aq)+2F^-(aq)}CaF2​(s)⇌Ca2+(aq)+2F−(aq), Ksp=[Ca2+][F−]2K_{sp}=[\mathrm{Ca^{2+}}][\mathrm{F^-}]^2Ksp​=[Ca2+][F−]2. The square comes from the fluoride ion's coefficient, not its charge.

Exam tip

Check the balanced equation before writing KspK_{sp}Ksp​. Coefficients become exponents, while ionic charges do not.

Key term

solubility product constant

The solubility product constant is the equilibrium constant for a solid salt dissolving into its aqueous ions.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the condition that defines solubility equilibrium for a slightly soluble salt in a closed system.
Show answer and explanation

Answer: B · Worked explanation

Solubility equilibrium is dynamic: ions continue to leave the solid and dissolved ions continue to rejoin it, but the two processes occur at equal rates. This balance keeps the dissolved ion concentrations constant. The tempting idea that both rates become zero confuses equilibrium with a stopped process; equilibrium describes balanced processes, not the absence of change.
3

Part 3 of 4: Equilibrium ion concentrations give a value for Ksp

Use concentrations measured in a saturated solution at equilibrium. For calcium fluoride, its dissolution stoichiometry gives two dissolved fluoride ions for each dissolved calcium ion. This relationship helps check whether concentration data are consistent. It also helps when finding ion concentrations from a measured molar solubility.

Worked example

Calculate a solubility product

A saturated calcium fluoride solution has [Ca2+]=2.0×10−4 mol L−1[\mathrm{Ca^{2+}}]=2.0\times10^{-4}\ \mathrm{mol\,L^{-1}}[Ca2+]=2.0×10−4 molL−1 and [F−]=4.0×10−4 mol L−1[\mathrm{F^-}]=4.0\times10^{-4}\ \mathrm{mol\,L^{-1}}[F−]=4.0×10−4 molL−1. Calculate KspK_{sp}Ksp​.
  1. 1
    Write Ksp=[Ca2+][F−]2K_{sp}=[\mathrm{Ca^{2+}}][\mathrm{F^-}]^2Ksp​=[Ca2+][F−]2.
  2. 2
    Substitute: Ksp=(2.0×10−4)(4.0×10−4)2K_{sp}=(2.0\times10^{-4})(4.0\times10^{-4})^2Ksp​=(2.0×10−4)(4.0×10−4)2.
  3. 3
    Evaluate: Ksp=(2.0×10−4)(1.6×10−7)=3.2×10−11K_{sp}=(2.0\times10^{-4})(1.6\times10^{-7})=3.2\times10^{-11}Ksp​=(2.0×10−4)(1.6×10−7)=3.2×10−11.

Answer: Ksp=3.2×10−11K_{sp}=3.2\times10^{-11}Ksp​=3.2×10−11 (no units under the standard convention).

The listed concentrations satisfy the two-to-one fluoride-to-calcium ratio. That ratio applies here because the salt supplies both ions without another significant source.

Key term

dissolution stoichiometry

Dissolution stoichiometry is the ion ratio specified by a balanced salt-dissolution equation.

Part 3 done

4

Part 4 of 4: Ksp describes equilibrium but needs careful interpretation

At a given temperature, KspK_{sp}Ksp​ specifies the product of equilibrium ion concentrations in a saturated solution. For salts with the same dissolution stoichiometry, a larger KspK_{sp}Ksp​ generally means greater molar solubility in pure water. Molar solubility is the amount of salt that dissolves per liter of solution.

Different ion ratios make direct comparisons misleading. For a one-to-one salt with molar solubility sss, Ksp=s2K_{sp}=s^2Ksp​=s2. For a one-to-two salt with no other ion sources, Ksp=s(2s)2=4s3K_{sp}=s(2s)^2=4s^3Ksp​=s(2s)2=4s3. Thus, different expressions connect KspK_{sp}Ksp​ to dissolved amounts. Temperature also matters because KspK_{sp}Ksp​ can change with temperature.

Common mistake

A small KspK_{sp}Ksp​ does not tell you how quickly a salt dissolves. It describes equilibrium, not dissolution rate.

Key term

molar solubility

Molar solubility is the amount of a substance that dissolves per liter of saturated solution at a given temperature.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain what happens when a slightly soluble salt reaches solubility equilibrium.

    Show mark schemeHide mark scheme

    Model answer

    Ions continue leaving and rejoining the solid. These processes have equal rates, so dissolved ion concentrations remain constant.

    • 1 mark for stating that ions continue leaving the solid
    • 1 mark for stating that dissolved ions continue rejoining the solid at an equal rate
    • 1 mark for linking equal rates to constant dissolved ion concentrations
  2. 2.Write[3 marks]

    Write the dissolution equation and KspK_{sp}Ksp​ expression for Al(OH)3\mathrm{Al(OH)_3}Al(OH)3​.

    Show mark schemeHide mark scheme

    Model answer

    Al(OH)3(s)⇌Al3+(aq)+3OH−(aq)\mathrm{Al(OH)_3(s)\rightleftharpoons Al^{3+}(aq)+3OH^-(aq)}Al(OH)3​(s)⇌Al3+(aq)+3OH−(aq); Ksp=[Al3+][OH−]3K_{sp}=[\mathrm{Al^{3+}}][\mathrm{OH^-}]^3Ksp​=[Al3+][OH−]3.

    • 1 mark for writing the correct ions with their charges and physical states
    • 1 mark for balancing the dissolution equation with three hydroxide ions
    • 1 mark for writing the ion concentration product with hydroxide cubed and no solid
  3. 3.Calculate[2 marks]

    A saturated AgCl\mathrm{AgCl}AgCl solution has [Ag+]=[Cl−]=1.0×10−5 mol L−1[\mathrm{Ag^+}]=[\mathrm{Cl^-}]=1.0\times10^{-5}\ \mathrm{mol\,L^{-1}}[Ag+]=[Cl−]=1.0×10−5 molL−1. Calculate KspK_{sp}Ksp​.

    Show mark schemeHide mark scheme

    Model answer

    Ksp=[Ag+][Cl−]=(1.0×10−5)2=1.0×10−10K_{sp}=[\mathrm{Ag^+}][\mathrm{Cl^-}]=(1.0\times10^{-5})^2=1.0\times10^{-10}Ksp​=[Ag+][Cl−]=(1.0×10−5)2=1.0×10−10.

    • 1 mark for using Ksp=[Ag+][Cl−]K_{sp}=[\mathrm{Ag^+}][\mathrm{Cl^-}]Ksp​=[Ag+][Cl−]
    • 1 mark for calculating 1.0×10−101.0\times10^{-10}1.0×10−10
  4. 4.Explain[2 marks]

    Explain why a larger KspK_{sp}Ksp​ does not always mean greater molar solubility.

    Show mark schemeHide mark scheme

    Model answer

    Salts with different dissolution stoichiometries produce different numbers of ions. Their KspK_{sp}Ksp​ expressions therefore relate differently to molar solubility.

    • 1 mark for identifying different dissolution stoichiometries as the reason
    • 1 mark for explaining that different ion ratios give different relationships between KspK_{sp}Ksp​ and molar solubility
  5. 5.State[2 marks]

    State what a small KspK_{sp}Ksp​ indicates and what it does not reveal about dissolution.

    Show mark schemeHide mark scheme

    Model answer

    A small KspK_{sp}Ksp​ indicates a small equilibrium ion concentration product. It does not reveal how quickly the salt dissolves.

    • 1 mark for identifying a small equilibrium ion concentration product
    • 1 mark for stating that KspK_{sp}Ksp​ does not give the dissolution rate

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

For the dissolution equation Mg(OH)2(s)⇌Mg2+(aq)+2OH−(aq)\mathrm{Mg(OH)_2(s) \rightleftharpoons Mg^{2+}(aq) + 2OH^-(aq)}Mg(OH)2​(s)⇌Mg2+(aq)+2OH−(aq), identify the KspK_{sp}Ksp​ expression.
Show answer and explanation

Answer: C · Worked explanation

The hydroxide coefficient in the balanced dissolution equation becomes the exponent 2, while magnesium has an implied coefficient of 1. The pure solid is omitted from the equilibrium expression. The tempting expression with the magnesium concentration squared incorrectly uses its ionic charge as an exponent; charges do not determine the powers in a KspK_{sp}Ksp​ expression.
3.

Easy·State[1 mark]

State which species are included in a KspK_{sp}Ksp​ expression for a salt dissolving in water.
Show answer and explanation

Answer: A · Worked explanation

A KspK_{sp}Ksp​ expression includes the concentrations of the aqueous ions produced in the balanced dissolution equation, with powers based on their coefficients. A pure solid is not included. Using ionic charges as powers is a common mistake because the powers come from stoichiometric coefficients, which need not match the magnitude of the charge.
4.

Easy·Identify[1 mark]

At a fixed temperature, identify what the KspK_{sp}Ksp​ value specifies for a slightly soluble salt.
Show answer and explanation

Answer: A · Worked explanation

At a given temperature, KspK_{sp}Ksp​ specifies the product of the equilibrium ion concentrations in a saturated solution, with each concentration raised to its stoichiometric power. It is an equilibrium quantity. The tempting interpretation as a dissolution rate is incorrect because rate describes how quickly change occurs, whereas KspK_{sp}Ksp​ does not specify the time required to reach equilibrium.
5.

Medium·Calculate[2 marks]

A saturated solution of MX2\mathrm{MX_2}MX2​ has [M2+]=3.0×10−4 mol L−1[\mathrm{M^{2+}}]=3.0\times10^{-4}\,\mathrm{mol\,L^{-1}}[M2+]=3.0×10−4molL−1 and [X−]=6.0×10−4 mol L−1[\mathrm{X^-}]=6.0\times10^{-4}\,\mathrm{mol\,L^{-1}}[X−]=6.0×10−4molL−1. For MX2(s)⇌M2+(aq)+2X−(aq)\mathrm{MX_2(s) \rightleftharpoons M^{2+}(aq) + 2X^-(aq)}MX2​(s)⇌M2+(aq)+2X−(aq), calculate KspK_{sp}Ksp​.
Show answer and explanation

Answer: C · Worked explanation

The expression is Ksp=[M2+][X−]2K_{sp}=[\mathrm{M^{2+}}][\mathrm{X^-}]^2Ksp​=[M2+][X−]2. Substituting gives (3.0×10−4)(6.0×10−4)2=(3.0×10−4)(3.6×10−7)=1.08×10−10(3.0\times10^{-4})(6.0\times10^{-4})^2=(3.0\times10^{-4})(3.6\times10^{-7})=1.08\times10^{-10}(3.0×10−4)(6.0×10−4)2=(3.0×10−4)(3.6×10−7)=1.08×10−10. The tempting value 1.80×10−71.80\times10^{-7}1.80×10−7 comes from multiplying the concentrations without squaring the concentration of X−\mathrm{X^-}X−.
6.

Medium·Determine[2 marks]

A slightly soluble salt has the dissolution equation A2B3(s)⇌2A3+(aq)+3B2−(aq)\mathrm{A_2B_3(s) \rightleftharpoons 2A^{3+}(aq) + 3B^{2-}(aq)}A2​B3​(s)⇌2A3+(aq)+3B2−(aq). Determine its KspK_{sp}Ksp​ expression.
Show answer and explanation

Answer: D · Worked explanation

The balanced equation gives coefficients of 2 for A3+\mathrm{A^{3+}}A3+ and 3 for B2−\mathrm{B^{2-}}B2−, so those are the respective exponents in the expression. The solid is omitted. The tempting expression that reverses the exponents uses ionic charges rather than coefficients; the charges help identify the ions but do not set the powers in KspK_{sp}Ksp​.
7.

Medium·Compare[2 marks]

At the same temperature, salts PQ(s)⇌P+(aq)+Q−(aq)\mathrm{PQ(s) \rightleftharpoons P^+(aq)+Q^-(aq)}PQ(s)⇌P+(aq)+Q−(aq) and RS(s)⇌R+(aq)+S−(aq)\mathrm{RS(s) \rightleftharpoons R^+(aq)+S^-(aq)}RS(s)⇌R+(aq)+S−(aq) have KspK_{sp}Ksp​ values of 4.0×10−84.0\times10^{-8}4.0×10−8 and 1.0×10−91.0\times10^{-9}1.0×10−9, respectively. Which conclusion is justified for their molar solubilities in pure water?
Show answer and explanation

Answer: A · Worked explanation

For either one-to-one salt in pure water, Ksp=s2K_{sp}=s^2Ksp​=s2, where sss is molar solubility. Because PQ has the larger KspK_{sp}Ksp​, it has the larger molar solubility.
8.

Medium·Deduce[2 marks]

A sealed vessel contains a saturated solution of a slightly soluble salt and some undissolved solid. More of the same solid is added, and the temperature is unchanged. Deduce what happens to the equilibrium ion concentrations after equilibrium is maintained.
Show answer and explanation

Answer: C · Worked explanation

The solution was already saturated at that temperature, so its equilibrium ion concentrations already correspond to the solubility equilibrium. Adding more of the pure solid does not change those concentrations; it increases the amount of undissolved solid instead. The tempting claim that the added solid must raise ion concentrations overlooks that the saturated solution has already reached its equilibrium ion levels.
9.

Hard·Calculate[2 marks]

A salt dissolves as ZCl2(s)⇌Z2+(aq)+2Cl−(aq)\mathrm{ZCl_2(s) \rightleftharpoons Z^{2+}(aq)+2Cl^-(aq)}ZCl2​(s)⇌Z2+(aq)+2Cl−(aq). Its KspK_{sp}Ksp​ is 4.0×10−124.0\times10^{-12}4.0×10−12, and no other source of either ion is present. Calculate its molar solubility in pure water.
Show answer and explanation

Answer: C · Worked explanation

If the molar solubility is sss, then [Z2+]=s[\mathrm{Z^{2+}}]=s[Z2+]=s and [Cl−]=2s[\mathrm{Cl^-}]=2s[Cl−]=2s, so Ksp=s(2s)2=4s3K_{sp}=s(2s)^2=4s^3Ksp​=s(2s)2=4s3. Thus s3=(4.0×10−12)/4=1.0×10−12s^3=(4.0\times10^{-12})/4=1.0\times10^{-12}s3=(4.0×10−12)/4=1.0×10−12, giving s=1.0×10−4 mol L−1s=1.0\times10^{-4}\,\mathrm{mol\,L^{-1}}s=1.0×10−4molL−1. The tempting value 2.0×10−62.0\times10^{-6}2.0×10−6 does not account for the squared chloride concentration.
10.

Hard·Deduce[2 marks]

For C2D(s)⇌2C+(aq)+D2−(aq)\mathrm{C_2D(s) \rightleftharpoons 2C^+(aq)+D^{2-}(aq)}C2​D(s)⇌2C+(aq)+D2−(aq), a saturated solution contains [C+]=6.0×10−5 mol L−1[\mathrm{C^+}]=6.0\times10^{-5}\,\mathrm{mol\,L^{-1}}[C+]=6.0×10−5molL−1 and [D2−]=3.0×10−5 mol L−1[\mathrm{D^{2-}}]=3.0\times10^{-5}\,\mathrm{mol\,L^{-1}}[D2−]=3.0×10−5molL−1. Deduce the KspK_{sp}Ksp​ value.
Show answer and explanation

Answer: C · Worked explanation

The expression is Ksp=[C+]2[D2−]K_{sp}=[\mathrm{C^+}]^2[\mathrm{D^{2-}}]Ksp​=[C+]2[D2−]. Substitution gives (6.0×10−5)2(3.0×10−5)=(3.6×10−9)(3.0×10−5)=1.08×10−13(6.0\times10^{-5})^2(3.0\times10^{-5})=(3.6\times10^{-9})(3.0\times10^{-5})=1.08\times10^{-13}(6.0×10−5)2(3.0×10−5)=(3.6×10−9)(3.0×10−5)=1.08×10−13. The tempting value 1.80×10−91.80\times10^{-9}1.80×10−9 results from not squaring [C+][\mathrm{C^+}][C+], even though its coefficient in the dissolution equation is 2.

Keep going

Next topic7.12 Common-ion effectPrevious topic7.10 Reaction quotient and Le Chatelier's principle

More in Unit 7 · Equilibrium

  1. 7.4Calculating the equilibrium constantNotes · 10 questions
  2. 7.5Magnitude of the equilibrium constantNotes · 10 questions
  3. 7.6Properties of the equilibrium constantNotes · 10 questions
  4. 7.7Calculating equilibrium concentrationsNotes · 10 questions
  5. 7.8Representations of equilibriumNotes · 10 questions
  6. 7.9Introduction to Le Chatelier's principleNotes · 10 questions
  7. 7.10Reaction quotient and Le Chatelier's principleNotes · 10 questions
  8. 7.11Introduction to solubility equilibriaNotes · 10 questions
  9. 7.12Common-ion effectNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1A slightly soluble salt reaches a dynamic equilibrium
  2. 2Ion concentrations determine the solubility product expression
  3. 3Equilibrium ion concentrations give a value for Ksp
  4. 4Ksp describes equilibrium but needs careful interpretation
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe