Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›7 Equilibrium
  4. ›7.12 Common-ion effect

AP Chemistry · Unit 7 · Equilibrium

7.12 Common-ion effect

Explain the common-ion effect, predict solubility changes, and calculate equilibrium concentrations.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A common ion reduces the solubility of a salt
  1. 1A common ion reduces the solubility of a salt
  2. 2The shared ion predicts which way solubility changes
  3. 3Use the added ion concentration to calculate solubility
  4. 4Set up concentrations before solving each mixture
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A common ion reduces the solubility of a salt

A common ion is an ion supplied by both a slightly soluble salt and another dissolved substance. For example, solid silver chloride dissolves as AgCl(s)⇌Ag+(aq)+Cl−(aq)\mathrm{AgCl(s)\rightleftharpoons Ag^+(aq)+Cl^-(aq)}AgCl(s)⇌Ag+(aq)+Cl−(aq). Adding sodium chloride supplies chloride ions. The added chloride shifts the dissolution equilibrium toward solid silver chloride. Less silver chloride can then dissolve.

Molar solubility is the amount of salt that dissolves per liter of solution, measured in mol L−1\mathrm{mol\,L^{-1}}molL−1. At a fixed temperature, the solubility product, KspK_{sp}Ksp​, does not change when a common ion is added. The equilibrium concentrations change instead.

Key terms · tap one for its definition

common ion

An ion shared by a salt’s dissolution equilibrium and another dissolved substance.

Molar solubility

The number of moles of a solute that dissolve per liter of solution at equilibrium.

Part 1 done

2

Part 2 of 4: The shared ion predicts which way solubility changes

To predict the effect, write the salt’s dissolution equation. Then identify whether the added substance supplies a product ion. An added product ion favors the solid, so solubility decreases. Either ion can have this effect. For silver chloride, dissolved silver nitrate supplies silver ions; dissolved sodium chloride supplies chloride ions.

A spectator ion does not appear in the dissolution equation. Sodium ions from sodium chloride do not directly cause the common-ion effect for silver chloride. For a salt with unequal ion coefficients, the same prediction still applies. The amount dissolved and the ion concentrations will not necessarily change by equal amounts.

Figure 1. Added chloride reduces the amount of silver chloride that can dissolve. The solid and dissolved ions remain in equilibrium.

Key terms · tap one for its definition

solubility decreases

Less solid dissolves per liter at equilibrium when a common ion is added at a fixed temperature.

spectator ion

An ion present in solution that does not participate in the dissolution equilibrium being considered.

Part 2 done

Quick check

One question on the part you just read

Easy

A student considers the dissolution equilibrium MX(s)⇌M+(aq)+X−(aq)\mathrm{MX(s)\rightleftharpoons M^+(aq)+X^-(aq)}MX(s)⇌M+(aq)+X−(aq). Which ion supplied by another dissolved substance would be a common ion for this equilibrium?
Show answer and explanation

Answer: C · Worked explanation

A common ion is supplied both by the slightly soluble salt and by another dissolved substance. Thus, another substance supplying either M+\mathrm{M^+}M+ or X−\mathrm{X^-}X− supplies a common ion. An ion absent from the dissolution equation is instead a spectator ion with respect to this equilibrium.
3

Part 3 of 4: Use the added ion concentration to calculate solubility

For silver chloride, Ksp=[Ag+][Cl−]K_{sp}=[\mathrm{Ag^+}][\mathrm{Cl^-}]Ksp​=[Ag+][Cl−]. Suppose the solution initially contains chloride from sodium chloride at 0.10 mol L−1\mathrm{mol\,L^{-1}}molL−1. If sss is the silver chloride that dissolves, equilibrium concentrations are [Ag+]=s[\mathrm{Ag^+}]=s[Ag+]=s and [Cl−]=0.10+s[\mathrm{Cl^-}]=0.10+s[Cl−]=0.10+s. The added chloride is much greater than sss, so 0.10+s≈0.100.10+s\approx0.100.10+s≈0.10. Check that assumption after solving.

Worked example

Solubility with added chloride

Find the molar solubility of silver chloride in 0.10 mol L−1\mathrm{mol\,L^{-1}}molL−1 sodium chloride. Use Ksp=1.8×10−10K_{sp}=1.8\times10^{-10}Ksp​=1.8×10−10.
  1. 1
    Write 1.8×10−10=s(0.10+s)1.8\times10^{-10}=s(0.10+s)1.8×10−10=s(0.10+s).
  2. 2
    Approximate 0.10+s≈0.100.10+s\approx0.100.10+s≈0.10 because sss is expected to be small.
  3. 3
    Solve s=1.8×10−100.10=1.8×10−9 mol L−1s=\frac{1.8\times10^{-10}}{0.10}=1.8\times10^{-9}\,\mathrm{mol\,L^{-1}}s=0.101.8×10−10​=1.8×10−9molL−1.
  4. 4
    Check [Cl−]=0.10+1.8×10−9≈0.10 mol L−1[\mathrm{Cl^-}]=0.10+1.8\times10^{-9}\approx0.10\,\mathrm{mol\,L^{-1}}[Cl−]=0.10+1.8×10−9≈0.10molL−1.

Answer: The molar solubility and [Ag+][\mathrm{Ag^+}][Ag+] are 1.8×10−9 mol L−11.8\times10^{-9}\,\mathrm{mol\,L^{-1}}1.8×10−9molL−1.

Part 3 done

4

Part 4 of 4: Set up concentrations before solving each mixture

When solutions are mixed, first calculate each ion’s concentration after dilution. Those concentrations become the starting values for the solubility calculation. For unequal ion ratios, use the dissolution coefficients. If CaF2\mathrm{CaF_2}CaF2​ dissolves by s mol L−1s\,\mathrm{mol\,L^{-1}}smolL−1, it adds sss of calcium ions and 2s2s2s of fluoride ions. Fluoride already present must be included: [F−]=[F−]initial+2s[\mathrm{F^-}]=[\mathrm{F^-}]_{\mathrm{initial}}+2s[F−]=[F−]initial​+2s.

Before calculating additional dissolution, check for precipitation if the mixture already contains both ions. A mixture with ion product above KspK_{sp}Ksp​ forms solid until equilibrium is reached. In that case, do not treat the concentration change as newly dissolved salt.

Exam tip

State which ion is already present, and include its initial concentration in the KspK_{sp}Ksp​ expression.

Key terms · tap one for its definition

unequal ion ratios

Dissolution ratios in which one formula unit produces different numbers of each ion.

precipitation

The formation of a solid from dissolved ions when their concentrations exceed equilibrium limits.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State what makes an ion a common ion in a solubility equilibrium.

    Show mark schemeHide mark scheme

    Model answer

    It is an ion supplied by both the slightly soluble salt and another dissolved substance.

    • 1 mark for identifying an ion supplied by both the salt and another dissolved substance
  2. 2.Explain[3 marks]

    Explain why adding sodium chloride decreases the solubility of silver chloride.

    Show mark schemeHide mark scheme

    Model answer

    Sodium chloride adds chloride ions, a product of silver chloride dissolution. The equilibrium shifts toward solid silver chloride, so less dissolves.

    • 1 mark for identifying chloride as the added common ion
    • 1 mark for stating that the dissolution equilibrium shifts toward solid silver chloride
    • 1 mark for concluding that less silver chloride dissolves
  3. 3.Predict[2 marks]

    Predict the effect of adding dissolved silver nitrate to silver chloride in water, and explain your answer.

    Show mark schemeHide mark scheme

    Model answer

    Silver chloride becomes less soluble because silver nitrate supplies silver ions, which are a product of its dissolution.

    • 1 mark for predicting that silver chloride becomes less soluble
    • 1 mark for identifying added silver ions as the common ion
  4. 4.Calculate[4 marks]

    Calculate the molar solubility of silver chloride in 0.020 mol L−1\mathrm{mol\,L^{-1}}molL−1 sodium chloride. Use Ksp=1.8×10−10K_{sp}=1.8\times10^{-10}Ksp​=1.8×10−10.

    Show mark schemeHide mark scheme

    Model answer

    Let sss be the molar solubility. Then 1.8×10−10=s(0.020+s)≈s(0.020)1.8\times10^{-10}=s(0.020+s)\approx s(0.020)1.8×10−10=s(0.020+s)≈s(0.020), giving s=9.0×10−9 mol L−1s=9.0\times10^{-9}\,\mathrm{mol\,L^{-1}}s=9.0×10−9molL−1. Since sss is much smaller than 0.020, the approximation is valid.

    • 1 mark for setting [Ag+]=s[\mathrm{Ag^+}]=s[Ag+]=s
    • 1 mark for setting [Cl−]=0.020+s[\mathrm{Cl^-}]=0.020+s[Cl−]=0.020+s in the KspK_{sp}Ksp​ expression
    • 1 mark for using the justified approximation 0.020+s≈0.0200.020+s\approx0.0200.020+s≈0.020
    • 1 mark for calculating s=9.0×10−9 mol L−1s=9.0\times10^{-9}\,\mathrm{mol\,L^{-1}}s=9.0×10−9molL−1
  5. 5.Describe[2 marks]

    Describe how to express the equilibrium fluoride concentration when CaF2\mathrm{CaF_2}CaF2​ dissolves in a solution already containing fluoride.

    Show mark schemeHide mark scheme

    Model answer

    Add the initial fluoride concentration to 2s2s2s, where sss is the molar solubility of calcium fluoride. Each formula unit produces two fluoride ions.

    • 1 mark for writing equilibrium fluoride concentration as initial fluoride concentration plus 2s2s2s
    • 1 mark for explaining that each dissolved formula unit produces two fluoride ions

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

At a fixed temperature, what happens to the KspK_{sp}Ksp​ of silver chloride when sodium chloride is added to a saturated solution?
Show answer and explanation

Answer: C · Worked explanation

At a fixed temperature, KspK_{sp}Ksp​ is constant for a given salt, even when a common ion changes the equilibrium concentrations. Adding sodium chloride increases [Cl−][\mathrm{Cl^-}][Cl−] and shifts the dissolution equilibrium toward solid, but it does not change KspK_{sp}Ksp​. The tempting idea that KspK_{sp}Ksp​ decreases confuses a change in solubility with a change in the equilibrium constant.
3.

Easy·Predict[1 mark]

Solid PbI2\mathrm{PbI_2}PbI2​ is at equilibrium with water. What happens to its molar solubility when potassium iodide is added, assuming the temperature remains constant?
Show answer and explanation

Answer: A · Worked explanation

The dissolution equation is PbI2(s)⇌Pb2+(aq)+2I−(aq)\mathrm{PbI_2(s)\rightleftharpoons Pb^{2+}(aq)+2I^-(aq)}PbI2​(s)⇌Pb2+(aq)+2I−(aq). Adding potassium iodide adds the product ion I−\mathrm{I^-}I−, favoring the solid and reducing how much PbI2\mathrm{PbI_2}PbI2​ dissolves. A constant KspK_{sp}Ksp​ does not mean the solubility remains constant; the equilibrium concentrations adjust to satisfy the same KspK_{sp}Ksp​.
4.

Easy·Identify[1 mark]

Silver chloride dissolves according to AgCl(s)⇌Ag+(aq)+Cl−(aq)\mathrm{AgCl(s)\rightleftharpoons Ag^+(aq)+Cl^-(aq)}AgCl(s)⇌Ag+(aq)+Cl−(aq). Sodium chloride is added. Which ion from sodium chloride does not directly act as the common ion in this equilibrium?
Show answer and explanation

Answer: A · Worked explanation

The added chloride ion is shared with the silver chloride dissolution equilibrium, so it is the common ion. Sodium is absent from that equation and is a spectator ion for this equilibrium. Silver ions are also in the dissolution equation, but sodium chloride does not supply them.
5.

Medium·Calculate[2 marks]

Silver chloride is placed in a solution that already contains 0.050 mol L−10.050\,\mathrm{mol\,L^{-1}}0.050molL−1 sodium chloride. Given Ksp=1.8×10−10K_{sp}=1.8\times10^{-10}Ksp​=1.8×10−10 for silver chloride, calculate its molar solubility. Assume the added chloride concentration is much larger than the amount of silver chloride that dissolves.
Show answer and explanation

Answer: D · Worked explanation

Let the molar solubility be sss. Then Ksp=s(0.050+s)K_{sp}=s(0.050+s)Ksp​=s(0.050+s), and the stated approximation gives 1.8×10−10≈s(0.050)1.8\times10^{-10}\approx s(0.050)1.8×10−10≈s(0.050). Therefore, s=1.8×10−10/0.050=3.6×10−9 mol L−1s=1.8\times10^{-10}/0.050=3.6\times10^{-9}\,\mathrm{mol\,L^{-1}}s=1.8×10−10/0.050=3.6×10−9molL−1. The value 1.3×10−51.3\times10^{-5}1.3×10−5 would result from incorrectly taking the square root of KspK_{sp}Ksp​ as if no common ion were present.
6.

Medium·Predict[1 mark]

A saturated solution of CaF2\mathrm{CaF_2}CaF2​ is prepared. Which change would reduce the amount of solid CaF2\mathrm{CaF_2}CaF2​ that can dissolve at the same temperature?
Show answer and explanation

Answer: D · Worked explanation

Sodium fluoride supplies F−\mathrm{F^-}F−, a product ion in CaF2(s)⇌Ca2+(aq)+2F−(aq)\mathrm{CaF_2(s)\rightleftharpoons Ca^{2+}(aq)+2F^-(aq)}CaF2​(s)⇌Ca2+(aq)+2F−(aq). The added common ion shifts the equilibrium toward solid, decreasing molar solubility. Nitrate and sodium are not ions in this dissolution equation, and adding water alone does not add a common ion.
7.

Medium·Determine[2 marks]

A solution is made by mixing 40.0 mL40.0\,\mathrm{mL}40.0mL of 0.150 mol L−10.150\,\mathrm{mol\,L^{-1}}0.150molL−1 sodium fluoride with water to a total volume of 100.0 mL100.0\,\mathrm{mL}100.0mL. Solid CaF2\mathrm{CaF_2}CaF2​ is then added. What is the initial fluoride concentration for the solubility calculation?
Show answer and explanation

Answer: A · Worked explanation

Dilution reduces the fluoride concentration to 0.150×(40.0/100.0)=0.0600 mol L−10.150\times(40.0/100.0)=0.0600\,\mathrm{mol\,L^{-1}}0.150×(40.0/100.0)=0.0600molL−1. This diluted value is the initial fluoride concentration to use before accounting for any additional fluoride from dissolving CaF2\mathrm{CaF_2}CaF2​. Using 0.150 mol L−10.150\,\mathrm{mol\,L^{-1}}0.150molL−1 overlooks the increase in total volume.
8.

Medium·Compare[1 mark]

Equal volumes of saturated silver chloride solutions are considered at the same temperature: one contains no added salt, and the other contains dissolved silver nitrate. Which comparison is correct?
Show answer and explanation

Answer: C · Worked explanation

Silver nitrate supplies Ag+\mathrm{Ag^+}Ag+, a product ion in the dissolution of silver chloride. This common ion shifts the equilibrium toward solid and reduces the molar solubility. The KspK_{sp}Ksp​ remains the same at the same temperature, but equal KspK_{sp}Ksp​ values do not require equal equilibrium concentrations or solubilities.
9.

Medium·Calculate[2 marks]

For CaF2(s)⇌Ca2+(aq)+2F−(aq)\mathrm{CaF_2(s)\rightleftharpoons Ca^{2+}(aq)+2F^-(aq)}CaF2​(s)⇌Ca2+(aq)+2F−(aq), a solution initially contains 0.080 mol L−10.080\,\mathrm{mol\,L^{-1}}0.080molL−1 fluoride and no calcium ions. Given Ksp=3.9×10−11K_{sp}=3.9\times10^{-11}Ksp​=3.9×10−11, estimate the molar solubility sss of CaF2\mathrm{CaF_2}CaF2​, treating the fluoride concentration as approximately unchanged by dissolution.
Show answer and explanation

Answer: D · Worked explanation

The equilibrium concentrations are approximately [Ca2+]=s[\mathrm{Ca^{2+}}]=s[Ca2+]=s and [F−]=0.080 mol L−1[\mathrm{F^-}]=0.080\,\mathrm{mol\,L^{-1}}[F−]=0.080molL−1. Thus, 3.9×10−11=s(0.080)23.9\times10^{-11}=s(0.080)^23.9×10−11=s(0.080)2, giving s=3.9×10−11/0.0064=6.1×10−9 mol L−1s=3.9\times10^{-11}/0.0064=6.1\times10^{-9}\,\mathrm{mol\,L^{-1}}s=3.9×10−11/0.0064=6.1×10−9molL−1. The fluoride concentration is squared because two fluoride ions are produced per formula unit.
10.

Hard·Deduce[2 marks]

Equal volumes of 0.0040 mol L−10.0040\,\mathrm{mol\,L^{-1}}0.0040molL−1 silver nitrate and 0.0040 mol L−10.0040\,\mathrm{mol\,L^{-1}}0.0040molL−1 sodium chloride are mixed. For silver chloride, Ksp=1.8×10−10K_{sp}=1.8\times10^{-10}Ksp​=1.8×10−10. Which conclusion best describes the mixture after mixing?
Show answer and explanation

Answer: D · Worked explanation

Mixing equal volumes halves each ion concentration, so both [Ag+][\mathrm{Ag^+}][Ag+] and [Cl−][\mathrm{Cl^-}][Cl−] are 0.0020 mol L−10.0020\,\mathrm{mol\,L^{-1}}0.0020molL−1. Their ion product is Qsp=(0.0020)(0.0020)=4.0×10−6Q_{sp}=(0.0020)(0.0020)=4.0\times10^{-6}Qsp​=(0.0020)(0.0020)=4.0×10−6, far greater than 1.8×10−101.8\times10^{-10}1.8×10−10, so precipitation occurs. The claim that dilution prevents precipitation misses that both ions remain at concentrations far above their equilibrium limits.

Keep going

Next topic8.1 Introduction to acids and basesPrevious topic7.11 Introduction to solubility equilibria

More in Unit 7 · Equilibrium

  1. 7.4Calculating the equilibrium constantNotes · 10 questions
  2. 7.5Magnitude of the equilibrium constantNotes · 10 questions
  3. 7.6Properties of the equilibrium constantNotes · 10 questions
  4. 7.7Calculating equilibrium concentrationsNotes · 10 questions
  5. 7.8Representations of equilibriumNotes · 10 questions
  6. 7.9Introduction to Le Chatelier's principleNotes · 10 questions
  7. 7.10Reaction quotient and Le Chatelier's principleNotes · 10 questions
  8. 7.11Introduction to solubility equilibriaNotes · 10 questions
  9. 7.12Common-ion effectNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1A common ion reduces the solubility of a salt
  2. 2The shared ion predicts which way solubility changes
  3. 3Use the added ion concentration to calculate solubility
  4. 4Set up concentrations before solving each mixture
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe