Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Environmental Science
  3. ›5 Land and Water Use
  4. ›5.14 Integrated pest management

AP Environmental Science · Unit 5 · Land and Water Use

5.14 Integrated pest management

Describe the main steps of integrated pest management, explain how it reduces reliance on chemical pesticides, and identify examples of its techniques.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Integrated pest management combines several control methods
  1. 1Integrated pest management combines several control methods
  2. 2IPM follows a repeating cycle of simple steps
  3. 3Biological and cultural controls reduce pesticide use
  4. 4Targeted chemical use slows the spread of resistance
  5. 5IPM protects farm profits, wildlife, and human health
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Integrated pest management combines several control methods

A farmer finds aphids on a crop. One option is to spray the whole field with a strong chemical. Another is to count the pests first and choose a measured response.

A pest is an organism that damages crops or interferes with human interests. Integrated pest management (IPM) combines several control methods to keep pests below damaging levels. It also limits harm to people and the environment.

Common mistake

IPM does not ban pesticides, and it does not aim to remove every pest. It manages pests and uses chemicals only when needed.

Key terms · tap one for its definition

pest

A pest is an organism, such as an insect, weed, or pathogen, that damages crops, livestock, or other human interests.

integrated pest management

Integrated pest management is a strategy that combines monitoring, prevention, and several control methods to keep pests below damaging levels with minimal environmental harm.

Part 1 done

2

Part 2 of 5: IPM follows a repeating cycle of simple steps

How does a farmer put this into practice? By following a set of steps in order.

  • Identify the pest and learn its life cycle and weak points.
  • Monitor the field by scouting and trapping to count pests.
  • Compare the count with the action threshold, the pest level that triggers control.
  • Prevent problems first, using the least harmful methods.
  • Use targeted chemicals only if other methods fail.
  • Evaluate the results and adjust the plan.

Below the threshold, a few pests cause little loss. The farmer waits and keeps monitoring. This avoids needless spraying.

Key term

action threshold

The action threshold is the pest population level at which control begins, because expected damage would cost more than the control.

Part 2 done

Quick check

One question on the part you just read

Easy

Which statement best describes integrated pest management?
Show answer and explanation

Answer: A · Worked explanation

IPM combines monitoring and several control methods to hold pests below damaging levels while limiting harm. It does not aim to remove every pest, and it is not limited to biological control. It also does not ban chemicals, because targeted pesticides are still allowed as a last resort.
3

Part 3 of 5: Biological and cultural controls reduce pesticide use

Which methods come first? Those that work with natural processes. Biological control uses a pest’s natural enemies, such as predators, parasites, or disease-causing organisms. Ladybugs eat aphids, and parasitic wasps lay eggs in caterpillars.

Cultural control changes how a crop is grown so pests do less harm. Crop rotation, adjusted planting dates, and removing crop residue all interrupt pest life cycles. Physical control, such as netting or hand picking, blocks or removes pests directly.

These methods usually act more slowly than a spray. But they are gentler on the surrounding ecosystem, and they often keep working for the whole season.

Common IPM techniques

TypeExampleHow it helps
BiologicalReleasing ladybugsPredators feed on aphids
CulturalRotating cropsRemoves the pest’s food and breaks its life cycle
PhysicalNetting or trapsBlocks or removes pests directly
Chemical, targetedPheromone luresAttract or confuse pests, so fewer sprays are needed
Type
Biological
Example
Releasing ladybugs
How it helps
Predators feed on aphids
Type
Cultural
Example
Rotating crops
How it helps
Removes the pest’s food and breaks its life cycle
Type
Physical
Example
Netting or traps
How it helps
Blocks or removes pests directly
Type
Chemical, targeted
Example
Pheromone lures
How it helps
Attract or confuse pests, so fewer sprays are needed

Key terms · tap one for its definition

biological control

Biological control is the use of a pest’s natural predators, parasites, or pathogens to reduce its population.

cultural control

Cultural control is the change of farming practices, such as crop rotation or planting dates, to make conditions less suitable for pests.

Part 3 done

4

Part 4 of 5: Targeted chemical use slows the spread of resistance

Chemicals still have a role, but a narrow one. A broad-spectrum pesticide kills many kinds of insects, including helpful ones. Losing natural enemies can let a pest rebound faster than before.

Heavy, repeated spraying also drives pesticide resistance. Pests that survive a chemical pass their resistant traits to their offspring. Over generations, more of the population is resistant.

IPM slows this by spraying less often, rotating chemical types, and treating only the affected areas.

Exam tip

To explain reduced pesticide use, link monitoring and thresholds to fewer sprays. Then add one non-chemical method.

Key terms · tap one for its definition

broad-spectrum pesticide

A broad-spectrum pesticide is a chemical that kills many types of organisms, including beneficial ones, rather than a single target pest.

pesticide resistance

Pesticide resistance is the increase in the share of a pest population with inherited traits that let it survive a pesticide.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the example of biological control.
Show answer and explanation

Answer: A · Worked explanation

Ladybugs are natural enemies of aphids, so releasing them is biological control. Rotating crops and plowing under residue change how the crop is grown, which is cultural control. Spraying a broad-spectrum pesticide is a chemical method, and it would also kill helpful insects.
5

Part 5 of 5: IPM protects farm profits, wildlife, and human health

What does a farm gain from all this monitoring? Several things.

  • Fewer applications can lower costs over time.
  • Natural enemies and pollinators survive.
  • Less toxic runoff reaches streams and groundwater.
  • Workers and consumers face less exposure to chemicals.
  • Slower resistance keeps pesticides effective for longer.

IPM does have limits. It takes knowledge and regular scouting, and results can be slower than a single spray. It also works beyond farms, in gardens, schools, and parks. Careful records of counts and results help the farmer improve the plan each season.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe the main steps of integrated pest management.

    Show mark schemeHide mark scheme

    Model answer

    The farmer identifies the pest and monitors its numbers. The count is compared with the action threshold. If control is needed, the least harmful methods are used first, with targeted chemicals only as a last resort, and the results are evaluated.

    • 1 mark for identifying the pest and monitoring its numbers
    • 1 mark for comparing the count with the action threshold to decide whether to act
    • 1 mark for using the least harmful methods first, then targeted chemicals only if needed, and evaluating the results
  2. 2.Explain[2 marks]

    Explain how IPM reduces reliance on chemical pesticides.

    Show mark schemeHide mark scheme

    Model answer

    Monitoring and an action threshold mean farmers spray only when pests reach a damaging level. Biological and cultural controls also keep pest numbers low without chemicals.

    • 1 mark for explaining that monitoring and thresholds mean spraying only when needed
    • 1 mark for stating that biological, cultural, or physical controls keep pest numbers down without chemicals
  3. 3.Identify[2 marks]

    Identify two examples of IPM techniques.

    Show mark schemeHide mark scheme

    Model answer

    Two examples are releasing ladybugs to eat aphids and rotating crops. Netting, traps, and pheromone lures are also correct.

    • 1 mark for identifying one valid technique, such as biological control, crop rotation, netting, traps, or pheromone lures
    • 1 mark for identifying a second, different valid technique
  4. 4.Justify[3 marks]

    Justify a farmer’s decision not to spray when a pest count is below the action threshold.

    Show mark schemeHide mark scheme

    Model answer

    At that level the crop damage costs less than the control. Not spraying also protects natural enemies and slows resistance. The farmer keeps monitoring in case numbers rise.

    • 1 mark for stating that damage below the threshold costs less than control
    • 1 mark for linking not spraying to protecting natural enemies or slowing resistance
    • 1 mark for stating that monitoring continues
  5. 5.Predict[2 marks]

    Predict how repeated use of the same pesticide will change a pest population over many generations.

    Show mark schemeHide mark scheme

    Model answer

    Pests with resistant traits survive and reproduce. Over generations, a larger share of the population is resistant, so the pesticide works less well.

    • 1 mark for stating that resistant individuals survive and reproduce
    • 1 mark for predicting that the share of resistant pests rises and the pesticide becomes less effective

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

What is the first step in an IPM cycle?
Show answer and explanation

Answer: A · Worked explanation

IPM starts by identifying the pest and learning its life cycle, so the farmer can choose a suitable control and know when to monitor. Spraying at planting skips monitoring, which defeats the purpose of IPM. Applying the most toxic chemical is a last resort, not a first step.
4.

Medium·Determine[1 mark]

A farmer counts 3 aphids per plant. The action threshold is 10 aphids per plant. Determine the best response.
Show answer and explanation

Answer: A · Worked explanation

The count of 3 is below the threshold of 10, so expected damage is smaller than the cost of control. The farmer keeps scouting and acts only if the count rises. Spraying now is the habit IPM avoids, because it wastes money and harms natural enemies.
5.

Medium·Explain[1 mark]

Explain why rotating crops reduces pest problems.
Show answer and explanation

Answer: A · Worked explanation

Many pests feed on only one crop. When a different crop is planted, the pest has less food and its life cycle is interrupted. No crop kills all pests with a chemical, and rotation does not simply make soil unsuitable for insects. Natural enemies may or may not increase, so that is not a guaranteed effect.
6.

Medium[1 mark]

Which technique is an example of physical control?
Show answer and explanation

Answer: A · Worked explanation

Netting blocks insects from reaching plants, so it is physical control. Releasing wasps uses natural enemies, which is biological control. Rotating crops changes how the crop is grown, which is cultural control. A selective pesticide is a targeted chemical method, even though it is applied only to small areas.
7.

Medium·Explain[1 mark]

Explain how a broad-spectrum pesticide can lead to a pest outbreak.
Show answer and explanation

Answer: A · Worked explanation

A broad-spectrum pesticide kills many species, including predators and parasites that keep the pest in check. With those enemies gone, surviving pests can multiply faster than before. The chemical does not feed pests, and it does not change the threshold or stop scouting.
8.

Hard·Predict[2 marks]

A farmer sprays the same pesticide on every plant each week. Which outcome is most likely over several years?
Show answer and explanation

Answer: A · Worked explanation

Pesticide resistance comes from inherited traits. Resistant individuals survive each spraying and have offspring, so the resistant share grows. The idea that an individual pest builds up immunity misreads how resistance works, because it spreads across generations. Permanent disappearance is unlikely when resistant survivors keep reproducing.
9.

Hard[1 mark]

Which farm best illustrates IPM?
Show answer and explanation

Answer: A · Worked explanation

IPM combines monitoring, prevention, natural enemies, and selective sprays used only when counts pass the threshold. A calendar spray ignores counts, and a single crop every year gives pests a steady food supply. Mixing pesticides to guarantee no pests goes against the aim of managing pests rather than eliminating them.
10.

Hard[2 marks]

After a farm adopts IPM, its pesticide applications fall from 8 to 3 per season while yields stay similar. Which explanation fits best?
Show answer and explanation

Answer: A · Worked explanation

A fall of 5 applications with steady yields means pests were controlled by other methods, and sprays were saved for times when counts passed the threshold. Broad-spectrum chemicals would harm natural enemies and not explain fewer sprays. A calendar schedule removes the monitoring that makes fewer sprays possible.

Keep going

Next topic5.15 Sustainable agriculturePrevious topic5.13 Reducing urban runoff

More in Unit 5 · Land and Water Use

  1. 5.9MiningNotes · 10 questions
  2. 5.10UrbanizationNotes · 10 questions
  3. 5.11Ecological footprintsNotes · 10 questions
  4. 5.12Introduction to sustainabilityNotes · 10 questions
  5. 5.13Reducing urban runoffNotes · 10 questions
  6. 5.14Integrated pest managementNotes · 10 questions
  7. 5.15Sustainable agricultureNotes · 10 questions
  8. 5.16AquacultureNotes · 10 questions
  9. 5.17Sustainable forestryNotes · 10 questions

All AP Environmental Science topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Integrated pest management combines several control methods
  2. 2IPM follows a repeating cycle of simple steps
  3. 3Biological and cultural controls reduce pesticide use
  4. 4Targeted chemical use slows the spread of resistance
  5. 5IPM protects farm profits, wildlife, and human health
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe