Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›1 Kinematics
  4. ›1.1 Scalars and vectors

AP Physics 1 · Unit 1 · Kinematics

1.1 Scalars and vectors

Define scalars and vectors, classify common motion quantities, and add or subtract vectors graphically.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Some quantities need a direction as well as a size
  1. 1Some quantities need a direction as well as a size
  2. 2Motion quantities come in scalar and vector pairs
  3. 3Arrows show both the size and direction of a vector
  4. 4Adding vectors head to tail gives the resultant
  5. 5Subtracting a vector means adding its opposite
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Some quantities need a direction as well as a size

A weather report says the wind is 20 miles per hour. A sailor needs more than that. Which way is it blowing? Some quantities are complete with a number and a unit, and others are not.

A scalar has magnitude only, meaning size. Mass, time and temperature are scalars. A vector has both magnitude and direction. Force and displacement are vectors, so a full description says how large and which way.

Common mistake

The magnitude of a vector is a scalar and is never negative. A minus sign on a vector only shows its direction along a chosen axis.

Key terms · tap one for its definition

scalar

A quantity fully described by a magnitude and a unit, with no direction, such as mass or time.

vector

A quantity with both magnitude and direction that combines with other vectors by vector addition.

Part 1 done

2

Part 2 of 5: Motion quantities come in scalar and vector pairs

Now apply these ideas to motion. Distance is the length of the path you travel. Speed is distance divided by time. Both are scalars.

Displacement and velocity are their vector partners. Displacement points from the start to the finish. Velocity says how fast and which way. Acceleration is a vector too.

Scalar quantities and their vector partners

ScalarVector partnerWhat differs
DistanceDisplacementPath length versus change in position
SpeedVelocitySize alone versus size with direction
MassWeightAmount of matter versus a downward force
Scalar
Distance
Vector partner
Displacement
What differs
Path length versus change in position
Scalar
Speed
Vector partner
Velocity
What differs
Size alone versus size with direction
Scalar
Mass
Vector partner
Weight
What differs
Amount of matter versus a downward force

Exam tip

Give a direction with every vector answer, such as 5 m/s east or 3 m/s² downward. A bare number is incomplete.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the quantity that is a scalar.
Show answer and explanation

Answer: C · Worked explanation

Speed has magnitude only, because it is distance divided by time and carries no direction. Velocity, force and displacement all need a direction to be complete. The most tempting wrong option is velocity, which sounds like speed but includes the direction of motion.
3

Part 3 of 5: Arrows show both the size and direction of a vector

To work with vectors, draw them. An arrow has a length that stands for the magnitude. Its head points the way the vector points.

Pick a scale first, such as 1 cm for 2 m/s. Use that same scale for every arrow in the diagram. Then a 6 m/s vector is a 3 cm arrow.

Two vectors are equal when they have the same magnitude and direction. Where you draw them does not matter. You can slide an arrow across the page without changing it.

Key term

scale

The ratio relating arrow length to the quantity it represents, for example 1 cm for 2 m/s.

Part 3 done

4

Part 4 of 5: Adding vectors head to tail gives the resultant

Suppose you walk 3 m east and then 4 m north. How far are you from your start? Draw the first arrow. Place the tail of the second arrow at the head of the first.

The arrow from the tail of the first to the head of the last is the resultant. It is the single vector with the same effect as all the others together. The order of adding does not change it.

Figure 1. The second arrow starts where the first ends. The resultant joins the start to the finish.

Vectors along one line are simpler. Choose a positive direction and add with signs. For example, 5 m east plus 3 m west gives 2 m east.

Worked example

Adding perpendicular displacements

A student walks 3.0 m east and then 4.0 m north. Find the magnitude and direction of the resultant displacement.
  1. 1
    Draw 3.0 m east, then place the tail of a 4.0 m north arrow at its head.
  2. 2
    The two arrows and the resultant form a right triangle.
  3. 3
    Apply the Pythagorean theorem: R=3.02+4.02=25=5.0 mR=\sqrt{3.0^2+4.0^2}=\sqrt{25}=5.0\ \mathrm{m}R=3.02+4.02​=25​=5.0 m.
  4. 4
    Find the angle: θ=tan⁡−1(4.03.0)=53∘\theta=\tan^{-1}\left(\frac{4.0}{3.0}\right)=53^\circθ=tan−1(3.04.0​)=53∘ north of east.

Answer: The resultant is 5.0 m at 53° north of east.

Key term

resultant

The single vector equal to the vector sum of two or more vectors.

Part 4 done

Quick check

One question on the part you just read

Easy

State what a vector must have to be described fully.
Show answer and explanation

Answer: B · Worked explanation

A vector is described by both its size and its direction. Magnitude alone describes a scalar. Direction alone does not say how large the quantity is. A time interval is not required, because many vectors, such as a displacement, can be given without one.
5

Part 5 of 5: Subtracting a vector means adding its opposite

Now consider a change. A car moving east at 10 m/s turns and moves north at 10 m/s. Its speed is unchanged, but its velocity is not.

To subtract, reverse the vector being subtracted and then add. In symbols, A⃗−B⃗=A⃗+(−B⃗)\vec{A}-\vec{B}=\vec{A}+(-\vec{B})A−B=A+(−B). The negative of a vector has the same magnitude and the opposite direction.

Worked example

Change in velocity

A car moving at 10 m/s east turns and moves at 10 m/s north. Find the magnitude and direction of the change in velocity, Δv⃗=v⃗f−v⃗i\Delta\vec{v}=\vec{v}_f-\vec{v}_iΔv=vf​−vi​.
  1. 1
    Reverse the initial velocity: −v⃗i-\vec{v}_i−vi​ is 10 m/s west.
  2. 2
    Add v⃗f\vec{v}_fvf​ (10 m/s north) and −v⃗i-\vec{v}_i−vi​ (10 m/s west) head to tail.
  3. 3
    Magnitude: 102+102=14 m/s\sqrt{10^2+10^2}=14\ \mathrm{m/s}102+102​=14 m/s.
  4. 4
    The two arrows are equal in length, so the resultant points 45° north of west.

Answer: The change in velocity is 14 m/s toward the northwest, 45° north of west.

Exam tip

When you subtract, write final minus initial and draw the reversed initial vector first. Then check your direction against a quick sketch.

Key term

negative of a vector

A vector with the same magnitude as the original but pointing in the opposite direction.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the difference between a scalar and a vector.

    Show mark schemeHide mark scheme

    Model answer

    A scalar has magnitude only. A vector has both magnitude and direction.

    • 1 mark for stating that a scalar has magnitude only
    • 1 mark for stating that a vector has magnitude and direction
  2. 2.Identify[2 marks]

    Identify which of these quantities are vectors: mass, displacement, speed, acceleration, time.

    Show mark schemeHide mark scheme

    Model answer

    Displacement and acceleration are vectors.

    • 1 mark for identifying displacement
    • 1 mark for identifying acceleration (and no scalar quantities)
  3. 3.Calculate[2 marks]

    Calculate the magnitude of the resultant when a 6.0 m east displacement is followed by an 8.0 m north displacement.

    Show mark schemeHide mark scheme

    Model answer

    R=6.02+8.02=100=10 mR=\sqrt{6.0^2+8.0^2}=\sqrt{100}=10\ \mathrm{m}R=6.02+8.02​=100​=10 m.

    • 1 mark for adding the perpendicular vectors with the Pythagorean theorem
    • 1 mark for obtaining 10 m10\ \mathrm{m}10 m
  4. 4.Describe[3 marks]

    Describe how to add two vectors graphically.

    Show mark schemeHide mark scheme

    Model answer

    Draw the first vector as an arrow to scale. Draw the second with its tail at the head of the first. The resultant runs from the tail of the first to the head of the second.

    • 1 mark for drawing the vectors as arrows to scale
    • 1 mark for placing the tail of the second at the head of the first
    • 1 mark for drawing the resultant from the tail of the first to the head of the last
  5. 5.Determine[3 marks]

    Determine the change in velocity of a ball that hits a wall at 6.0 m/s east and rebounds at 6.0 m/s west.

    Show mark schemeHide mark scheme

    Model answer

    Take east as positive: Δv=vf−vi=−6.0−(+6.0)=−12 m/s\Delta v=v_f-v_i=-6.0-(+6.0)=-12\ \mathrm{m/s}Δv=vf​−vi​=−6.0−(+6.0)=−12 m/s. The change is 12 m/s west.

    • 1 mark for using final minus initial velocity
    • 1 mark for using opposite signs for the two velocities
    • 1 mark for obtaining 12 m/s west

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

Two arrows have the same length and point the same way, but they are drawn in different places on a page. What do they represent?
Show answer and explanation

Answer: D · Worked explanation

Vectors are defined by magnitude and direction only. Sliding an arrow to a new location without turning it or changing its length leaves the vector unchanged. The option claiming they differ because of position is wrong, since position on the page is not part of what defines a vector.
4.

Medium·Calculate[2 marks]

Calculate the magnitude of the displacement of a hiker who walks 6.0 km east and then 8.0 km north.
Show answer and explanation

Answer: B · Worked explanation

The two legs are perpendicular, so 6.02+8.02=100=10 km\sqrt{6.0^2+8.0^2}=\sqrt{100}=10\ \mathrm{km}6.02+8.02​=100​=10 km. The 14 km option is the total distance walked, which adds the lengths of the legs. Displacement is the straight-line change from start to finish, so it is shorter. Always check whether a question asks for distance or displacement.
5.

Medium·Determine[1 mark]

Determine the net force on a cart pulled with 7.0 N east and 3.0 N west along one line.
Show answer and explanation

Answer: A · Worked explanation

Take east as positive: +7.0+(−3.0)=+4.0 N+7.0+(-3.0)=+4.0\ \mathrm{N}+7.0+(−3.0)=+4.0 N, so the net force is 4.0 N east. The 10 N option adds the magnitudes as if both forces pointed the same way. Opposite directions partly cancel, and the larger force sets the direction of the result.
6.

Medium[2 marks]

Which procedure gives A⃗−B⃗\vec{A}-\vec{B}A−B graphically?
Show answer and explanation

Answer: C · Worked explanation

Subtracting a vector means adding its negative, so B is reversed and then added to A head to tail. Adding A and B and then reversing gives the negative of the sum, not the difference. Subtracting only lengths ignores directions and is correct only when the vectors point the same way and A is the longer one.
7.

Medium·Compare[2 marks]

A runner completes one 400 m lap and finishes at the starting line. Compare the distance and the magnitude of the displacement.
Show answer and explanation

Answer: A · Worked explanation

The runner covers 400 m of path, so the distance is 400 m. The finish is the same place as the start, so the change in position is zero. The option giving both as 400 m confuses path length with change in position, which are equal only for one-way straight-line motion.
8.

Hard·Determine[2 marks]

Determine the change in velocity of a cart moving at 4.0 m/s east that reverses and moves at 4.0 m/s west.
Show answer and explanation

Answer: B · Worked explanation

Take east as positive: Δv=vf−vi=−4.0−(+4.0)=−8.0 m/s\Delta v=v_f-v_i=-4.0-(+4.0)=-8.0\ \mathrm{m/s}Δv=vf​−vi​=−4.0−(+4.0)=−8.0 m/s, which is 8.0 m/s west. The zero option is tempting because the speed is unchanged, but velocity is a vector and its direction has reversed, so the change is not zero. Always subtract the initial velocity from the final velocity, keeping the signs.
9.

Hard[2 marks]

Two forces with magnitudes 6 N and 8 N act on one object. Which value cannot be the magnitude of their resultant?
Show answer and explanation

Answer: D · Worked explanation

The resultant is smallest when the forces oppose, giving 8 - 6 = 2 N, and largest when they align, giving 8 + 6 = 14 N. Any value between these is possible, including 10 N for perpendicular forces. A resultant of 16 N would exceed the largest possible sum, so it cannot occur.
10.

Hard·Calculate[2 marks]

Vector A is 5.0 units east and vector B is 5.0 units north. Calculate the magnitude of A⃗−B⃗\vec{A}-\vec{B}A−B.
Show answer and explanation

Answer: C · Worked explanation

Reversing B gives 5.0 units south. Adding it to A gives perpendicular legs of 5.0, so the magnitude is 5.02+5.02=7.1\sqrt{5.0^2+5.0^2}=7.15.02+5.02​=7.1 units. The 10 unit option adds the magnitudes, which only works when the vectors point the same way. Draw the two arrows head to tail to confirm the right triangle.

Keep going

Next topic1.2 Displacement, velocity and acceleration

More in Unit 1 · Kinematics

  1. 1.1Scalars and vectorsNotes · 10 questions
  2. 1.2Displacement, velocity and accelerationNotes · 9 questions
  3. 1.3Representing motionNotes · 10 questions
  4. 1.4Reference frames and relative motionNotes · 10 questions
  5. 1.5Vectors and motion in two dimensionsNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Some quantities need a direction as well as a size
  2. 2Motion quantities come in scalar and vector pairs
  3. 3Arrows show both the size and direction of a vector
  4. 4Adding vectors head to tail gives the resultant
  5. 5Subtracting a vector means adding its opposite
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe